* bug-report
@ 2003-09-18 13:55 Michael Bode
0 siblings, 0 replies; 3+ messages in thread
From: Michael Bode @ 2003-09-18 13:55 UTC (permalink / raw)
To: linux-kernel
hi!
this is my first bug-report for a kernel, so i'm sorry when it is not
perfect.
i have compiled kernel 2.4.22 and the kernel runs very good. today i
want to make menuconfig a 2. time with the same target.
cd /usr/src/linux-2.4.22
su
make menuconfig
Menuconfig has encountered a possible error in one of the kernel's
configuration files and is unable to continue. Here is the error
report:
Please report this to the maintainer <mec@shout.net>. You may also
send a problem report to <linux-kernel@vger.kernel.org>.
Please indicate the kernel version you are trying to configure and
which menu you were trying to enter when this error occurred.
make: *** [menuconfig] Fehler 1
my system:
debian sid
gcc 3.3.2
athlon 2400+
best regards
michael
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: bug-report
2002-07-30 14:59 bug-report bege
@ 2002-08-09 10:43 ` Adrian Bunk
0 siblings, 0 replies; 3+ messages in thread
From: Adrian Bunk @ 2002-08-09 10:43 UTC (permalink / raw)
To: bege; +Cc: linux-kernel
On Tue, 30 Jul 2002, bege wrote:
>...
> 2.
> --
> I got an OOPS kernel message (described below) while i was compiling
> XFree86 with gcc-3.0 and g++-2.95
Is this more or less reproducible or did it happen exactly once?
> 3.
> --
> I used the -mcpu=athlon -march=athlon parameters in the makefile although
> g++-2.95 doesn't support this. But i think it may be cause compile errors
> not kernel crash.
Yes, this is right, it mustn't result in a kernel crash.
> 4.
> --
>
> Linux version 2.4.18 (root@void) (gcc version 3.0.4) #11 Tue Jul 30 13:33:15 CEST 2002
>...
Could you try 2.4.19?
gcc-3.0.4 is not a supported compiler. Please try to reproduce the problem
with a kernel compiled using gcc 2.95.3 or a RedHat gcc-2.96-74 or later.
cu
Adrian
--
You only think this is a free country. Like the US the UK spends a lot of
time explaining its a free country because its a police state.
Alan Cox
^ permalink raw reply [flat|nested] 3+ messages in thread
* bug-report
@ 2002-07-30 14:59 bege
2002-08-09 10:43 ` bug-report Adrian Bunk
0 siblings, 1 reply; 3+ messages in thread
From: bege @ 2002-07-30 14:59 UTC (permalink / raw)
To: linux-kernel
--------------
| BUG-REPORT |
--------------
1.
--
OOPS message while compiling
2.
--
I got an OOPS kernel message (described below) while i was compiling
XFree86 with gcc-3.0 and g++-2.95
3.
--
I used the -mcpu=athlon -march=athlon parameters in the makefile although
g++-2.95 doesn't support this. But i think it may be cause compile errors
not kernel crash.
4.
--
Linux version 2.4.18 (root@void) (gcc version 3.0.4) #11 Tue Jul 30 13:33:15 CEST 2002
5.
--
ksymoops 2.4.6 on i686 2.4.18. Options used
-V (specified)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.4.18/ (default)
-m /boot/System.map-2.4.18 (specified)
<1>Unable to handle kernel paging request at virtual address ea840758
c01446da
*pde = 00000000
Oops: 0002
CPU: 0
EIP: 0010:[<c01446da>] Not tainted
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010246
eax: ea840754 ebx: cd6ef4c0 ecx: cd6ef4d8 edx: c4f6ff58
esi: cd6ef3e0 edi: c562f140 ebp: c562f168 esp: c681bf28
ds: 0018 es: 0018 ss: 0018
Process dpkg (pid: 24488, stackpage=c681b000)
Stack: 00000000 c562f140 c285fdc0 c562f140 bffffa0c c0144706 c562f140 c562f140
c013db4e c562f140 00000000 c013dc19 c562f140 c6de3e40 c681bf9c 00000000
c013ce99 c6de3e40 c681bf9c 00000000 fffffff0 c562f140 c562f140 ce14b000
Call Trace: [<c0144706>] [<c013db4e>] [<c013dc19>] [<c013ce99>] [<c013de5d>]
[<c0106d2b>]
Code: 89 48 04 89 43 18 89 51 04 89 0a ff 04 24 eb b1 8d b6 00 00
>>EIP; c01446da <select_parent+6a/80> <=====
>>ebx; cd6ef4c0 <_end+d4a1e94/105b29d4>
>>ecx; cd6ef4d8 <_end+d4a1eac/105b29d4>
>>edx; c4f6ff58 <_end+4d2292c/105b29d4>
>>esi; cd6ef3e0 <_end+d4a1db4/105b29d4>
>>edi; c562f140 <_end+53e1b14/105b29d4>
>>ebp; c562f168 <_end+53e1b3c/105b29d4>
>>esp; c681bf28 <_end+65ce8fc/105b29d4>
Trace; c0144706 <shrink_dcache_parent+16/30>
Trace; c013db4e <d_unhash+1e/50>
Trace; c013dc19 <vfs_rmdir+99/210>
Trace; c013ce99 <lookup_hash+49/90>
Trace; c013de5d <sys_rmdir+cd/f0>
Trace; c0106d2b <system_call+33/38>
Code; c01446da <select_parent+6a/80>
00000000 <_EIP>:
Code; c01446da <select_parent+6a/80> <=====
0: 89 48 04 mov %ecx,0x4(%eax) <=====
Code; c01446dd <select_parent+6d/80>
3: 89 43 18 mov %eax,0x18(%ebx)
Code; c01446e0 <select_parent+70/80>
6: 89 51 04 mov %edx,0x4(%ecx)
Code; c01446e3 <select_parent+73/80>
9: 89 0a mov %ecx,(%edx)
Code; c01446e5 <select_parent+75/80>
b: ff 04 24 incl (%esp,1)
Code; c01446e8 <select_parent+78/80>
e: eb b1 jmp ffffffc1 <_EIP+0xffffffc1> c014469b <select_parent+2b/80>
Code; c01446ea <select_parent+7a/80>
10: 8d b6 00 00 00 00 lea 0x0(%esi),%esi
7.1
---
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
Linux void 2.4.18 #11 Tue Jul 30 13:33:15 CEST 2002 i686 unknown
Gnu C 3.0.4
Gnu make 3.79.1
util-linux 2.11n
mount 2.11n
modutils 2.4.15
e2fsprogs 1.27
PPP 2.4.1
Linux C Library 2.2.5
Dynamic linker (ldd) 2.2.5
Procps 2.0.7
Net-tools 1.60
Console-tools 0.2.3
Sh-utils 2.0.11
Modules Loaded agpgart tulip af_packet rtc unix
7.2
---
processor : 0
vendor_id : AuthenticAMD
cpu family : 6
model : 6
model name : AMD Athlon(TM) XP 1800+
stepping : 2
cpu MHz : 1532.941
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse syscall mmxext 3dnowext 3dnow
bogomips : 3060.53
7.3
---
agpgart 12832 0 (unused)
tulip 37664 1
af_packet 8200 0 (unused)
rtc 5688 0 (autoclean)
unix 13924 5 (autoclean)
7.4
---
/proc/ioports:
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
01f0-01f7 : ide0
03c0-03df : vga+
03f6-03f6 : ide0
0cf8-0cff : PCI conf1
9000-901f : VIA Technologies, Inc. UHCI USB (#4)
9400-941f : VIA Technologies, Inc. UHCI USB (#3)
9800-980f : VIA Technologies, Inc. Bus Master IDE
9800-9807 : ide0
9808-980f : ide1
a000-a0ff : Accton Technology Corporation EN-1216 Ethernet Adapter
a000-a0ff : tulip
a400-a407 : Creative Labs SB Live!
a800-a81f : Creative Labs SB Live! EMU10k1
b000-b01f : VIA Technologies, Inc. UHCI USB (#2)
b400-b41f : VIA Technologies, Inc. UHCI USB
b800-b8ff : C-Media Electronics Inc CM8738
d000-dfff : PCI Bus #01
d800-d8ff : PCI device 1002:514c (ATI Technologies Inc)
/proc/iomem:
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000f0000-000fffff : System ROM
00100000-0fffbfff : System RAM
00100000-001be4fe : Kernel code
001be4ff-001ec03f : Kernel data
0fffc000-0fffefff : ACPI Tables
0ffff000-0fffffff : ACPI Non-volatile Storage
d6000000-d60003ff : Accton Technology Corporation EN-1216 Ethernet Adapter
d6000000-d60003ff : tulip
d6800000-d68000ff : PCI device 1106:3104 (VIA Technologies, Inc.)
d7000000-d7dfffff : PCI Bus #01
d7000000-d700ffff : PCI device 1002:514c (ATI Technologies Inc)
d7f00000-dfffffff : PCI Bus #01
d8000000-dfffffff : PCI device 1002:514c (ATI Technologies Inc)
e0000000-e3ffffff : VIA Technologies, Inc. VT8367 [KT266]
fec00000-fec00fff : reserved
fee00000-fee00fff : reserved
ffff0000-ffffffff : reserved
7.5
---
00:00.0 Host bridge: VIA Technologies, Inc. VT8367 [KT266]
Subsystem: Asustek Computer, Inc.: Unknown device 807f
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=64M]
Capabilities: [a0] AGP version 2.0
Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:01.0 PCI bridge: VIA Technologies, Inc. VT8367 [KT266 AGP] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: d7000000-d7dfffff
Prefetchable memory behind bridge: d7f00000-dfffffff
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:05.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10)
Subsystem: Asustek Computer, Inc.: Unknown device 80e2
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (500ns min, 6000ns max)
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at b800 [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:09.0 USB Controller: VIA Technologies, Inc. UHCI USB (rev 50) (prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 8080
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin A routed to IRQ 3
Region 4: I/O ports at b400 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:09.1 USB Controller: VIA Technologies, Inc. UHCI USB (rev 50) (prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 8080
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin B routed to IRQ 11
Region 4: I/O ports at b000 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:09.2 USB Controller: VIA Technologies, Inc.: Unknown device 3104 (rev 51) (prog-if 20)
Subsystem: Asustek Computer, Inc.: Unknown device 8080
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin C routed to IRQ 10
Region 0: Memory at d6800000 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0d.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 08)
Subsystem: Creative Labs: Unknown device 8064
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (500ns min, 5000ns max)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at a800 [size=32]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0d.1 Input device controller: Creative Labs SB Live! (rev 08)
Subsystem: Creative Labs Gameport Joystick
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Region 0: I/O ports at a400 [size=8]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0f.0 Ethernet controller: Accton Technology Corporation EN-1216 Ethernet Adapter (rev 11)
Subsystem: Standard Microsystems Corp [SMC]: Unknown device 1255
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (63750ns min, 63750ns max), cache line size 08
Interrupt: pin A routed to IRQ 4
Region 0: I/O ports at a000 [size=256]
Region 1: Memory at d6000000 (32-bit, non-prefetchable) [size=1K]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=100mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:11.0 ISA bridge: VIA Technologies, Inc.: Unknown device 3147
Subsystem: Asustek Computer, Inc.: Unknown device 808c
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:11.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
Subsystem: Asustek Computer, Inc.: Unknown device 808c
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin A routed to IRQ 0
Region 4: I/O ports at 9800 [size=16]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:11.2 USB Controller: VIA Technologies, Inc. UHCI USB (rev 23) (prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 808c
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin D routed to IRQ 7
Region 4: I/O ports at 9400 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:11.3 USB Controller: VIA Technologies, Inc. UHCI USB (rev 23) (prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 808c
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin D routed to IRQ 7
Region 4: I/O ports at 9000 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:00.0 VGA compatible controller: ATI Technologies Inc: Unknown device 514c (prog-if 00 [VGA])
Subsystem: ATI Technologies Inc: Unknown device 013a
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (2000ns min), cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: Memory at d8000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at d800 [size=256]
Region 2: Memory at d7000000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at d7fe0000 [disabled] [size=128K]
Capabilities: [58] AGP version 2.0
Status: RQ=47 SBA+ 64bit- FW+ Rate=x1,x2
Command: RQ=0 SBA+ AGP- 64bit- FW- Rate=<none>
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
bege
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2003-09-18 13:54 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2003-09-18 13:55 bug-report Michael Bode
-- strict thread matches above, loose matches on Subject: below --
2002-07-30 14:59 bug-report bege
2002-08-09 10:43 ` bug-report Adrian Bunk
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®