From: pazke@donpac.ru
To: linux-kernel@vger.kernel.org
Cc: Jes Sorensen <jes@trained-monkey.org>
Subject: [boor@unix-ag.org: visws linux-2.6.0-test5 qla1280 isues]
Date: Fri, 26 Sep 2003 09:56:02 +0400 [thread overview]
Message-ID: <20030926055602.GB1407@pazke> (raw)
[-- Attachment #1: Type: text/plain, Size: 2572 bytes --]
----- Forwarded message from Florian Boor <boor@unix-ag.org> -----
Subject: visws linux-2.6.0-test5 qla1280 isues
From: Florian Boor <boor@unix-ag.org>
To: pazke@donpac.ru
X-Mailer: Ximian Evolution 1.4.4
Hi Andrey!
Greetings from kernel hacker meeting in Oldenburg :-)
My first task for today was war compiling a kernel
with qla1280 debug support. It still hangs... here the output:
qla1x160: Supported Device Found VID=1077 DID=1080 SSVID=1077 SSDID=1
qla1280: QLA1080 found on PCI bus 1, dev 0
Configure PCI space for adapter...
scsi(0): Reading NVRAM
qla1280_read_nvram: Completed Reading NVRAM
scsi(0): Determining if RISC is loaded
qla1280: NVRAM configured to load RISC load.
scsi(0): Verifying chip
qla1280_chip_diag: Checking mailboxes of chip
scsi(0): Setup chip
qla1280_setup_chip: DMA RISC code (15675) words
qla1280_setup_chip: Verifying checksum of loaded RISC code.
qla1280_setup_chip: start firmware running.
scsi(0): Configure NVRAM parameters
qla1280 : initiator scsi id bus[0]=7
qla1280 : initiator scsi id bus[1]=0
qla1280 : bus reset delay[0]=5
qla1280 : bus reset delay[1]=0
qla1280 : retry count[0]=0
qla1280 : retry delay[0]=0
qla1280 : retry count[1]=0
qla1280 : retry delay[1]=0
qla1280 : async data setup time[0]=9
qla1280 : async data setup time[1]=0
qla1280 : req/ack active negation[0]=1
qla1280 : req/ack active negation[1]=0
qla1280 : data line active negation[0]=1
qla1280 : data line active negation[1]=0
qla1280 : disable loading risc code=0
qla1280 : enable 64bit addressing=0
qla1280 : selection timeout limit[0]=250
qla1280 : selection timeout limit[1]=0
qla1280 : max queue depth[0]=256
qla1280 : max queue depth[1]=0
scsi(0:0): Resetting SCSI BUS
scsi0 : QLogic QLA1080 PCI to SCSI Host Adapter: bus 1 device 0 irq 16
Firmware version: 8.15.00, Driver version 3.23.35
Any
idea?
I'll be here working on SGI320 and iPaq for the next two days, maybe
i'm able to port the monitor detection code from 2.2.x. :-)
Greetings
Florian
--
The dream of yesterday Florian Boor
is the hope of today Tel: 0271-7411487
and the reality of tomorrow. boor@unix-ag.org
[Robert Hutchings Goddard, 1904] florian.boor@bsystems.de
6C 44 30 4C 43 20 6B 61 16 07 0F AA E6 97 70 A8
----- End forwarded message -----
--
Andrey Panin | Linux and UNIX system administrator
pazke@donpac.ru | PGP key: wwwkeys.pgp.net
[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]
reply other threads:[~2003-09-26 5:56 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20030926055602.GB1407@pazke \
--to=pazke@donpac.ru \
--cc=jes@trained-monkey.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®