[boor@unix-ag.org: visws linux-2.6.0-test5 qla1280 isues]

[boor@unix-ag.org: visws linux-2.6.0-test5 qla1280 isues]

[pazke]

[-- Attachment #1: Type: text/plain, Size: 2572 bytes --]

----- Forwarded message from Florian Boor <boor@unix-ag.org> -----

Subject: visws linux-2.6.0-test5 qla1280 isues
From: Florian Boor <boor@unix-ag.org>
To: pazke@donpac.ru
X-Mailer: Ximian Evolution 1.4.4 

Hi Andrey!

Greetings from kernel hacker meeting in Oldenburg :-)

My first task for today was war compiling a kernel
with qla1280 debug support. It still hangs... here the output:

qla1x160: Supported Device Found VID=1077 DID=1080 SSVID=1077 SSDID=1
qla1280: QLA1080 found on PCI bus 1, dev 0
Configure PCI space for adapter...
scsi(0): Reading NVRAM
qla1280_read_nvram: Completed Reading NVRAM
scsi(0): Determining if RISC is loaded
qla1280: NVRAM configured to load RISC load.
scsi(0): Verifying chip
qla1280_chip_diag: Checking mailboxes of chip
scsi(0): Setup chip
qla1280_setup_chip: DMA RISC code (15675) words
qla1280_setup_chip: Verifying checksum of loaded RISC code.
qla1280_setup_chip: start firmware running.
scsi(0): Configure NVRAM parameters
qla1280 : initiator scsi id bus[0]=7
qla1280 : initiator scsi id bus[1]=0
qla1280 : bus reset delay[0]=5
qla1280 : bus reset delay[1]=0
qla1280 : retry count[0]=0
qla1280 : retry delay[0]=0
qla1280 : retry count[1]=0
qla1280 : retry delay[1]=0
qla1280 : async data setup time[0]=9
qla1280 : async data setup time[1]=0
qla1280 : req/ack active negation[0]=1
qla1280 : req/ack active negation[1]=0
qla1280 : data line active negation[0]=1
qla1280 : data line active negation[1]=0
qla1280 : disable loading risc code=0
qla1280 : enable 64bit addressing=0
qla1280 : selection timeout limit[0]=250
qla1280 : selection timeout limit[1]=0
qla1280 : max queue depth[0]=256
qla1280 : max queue depth[1]=0
scsi(0:0): Resetting SCSI BUS
scsi0 : QLogic QLA1080 PCI to SCSI Host Adapter: bus 1 device 0 irq 16
       Firmware version:  8.15.00, Driver version 3.23.35
Any
idea?                                                                                
I'll be here working on SGI320 and iPaq for the next two days, maybe
i'm able to port the monitor detection code from 2.2.x. :-)

Greetings

Florian

-- 
The dream of yesterday                     Florian Boor
is the hope of today                       Tel: 0271-7411487 
and the reality of tomorrow.               boor@unix-ag.org
[Robert Hutchings Goddard, 1904]           florian.boor@bsystems.de

6C 44 30 4C 43 20 6B 61 16 07 0F AA E6 97 70 A8


----- End forwarded message -----

-- 
Andrey Panin		| Linux and UNIX system administrator
pazke@donpac.ru		| PGP key: wwwkeys.pgp.net

[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]