* [PATCH] select CRC32
@ 2003-09-26 22:43 Brian Gerst
2003-09-27 5:13 ` Sam Ravnborg
0 siblings, 1 reply; 2+ messages in thread
From: Brian Gerst @ 2003-09-26 22:43 UTC (permalink / raw)
To: Linus Torvalds; +Cc: Linux-Kernel
[-- Attachment #1: Type: text/plain, Size: 60 bytes --]
Use "select CRC32" in Kconfig instead of makefile includes.
[-- Attachment #2: crc32-1 --]
[-- Type: text/plain, Size: 26715 bytes --]
diff -urN linux-2.6.0-test5-bk/drivers/media/dvb/dvb-core/Kconfig linux/drivers/media/dvb/dvb-core/Kconfig
--- linux-2.6.0-test5-bk/drivers/media/dvb/dvb-core/Kconfig 2003-07-27 13:09:34.000000000 -0400
+++ linux/drivers/media/dvb/dvb-core/Kconfig 2003-09-26 10:18:22.092564536 -0400
@@ -1,6 +1,7 @@
config DVB_CORE
tristate "DVB Core Support"
depends on DVB
+ select CRC32
help
DVB core utility functions for device handling, software fallbacks etc.
diff -urN linux-2.6.0-test5-bk/drivers/media/dvb/dvb-core/Makefile.lib linux/drivers/media/dvb/dvb-core/Makefile.lib
--- linux-2.6.0-test5-bk/drivers/media/dvb/dvb-core/Makefile.lib 2003-07-27 12:57:02.000000000 -0400
+++ linux/drivers/media/dvb/dvb-core/Makefile.lib 1969-12-31 19:00:00.000000000 -0500
@@ -1 +0,0 @@
-obj-$(CONFIG_DVB_CORE) += crc32.o
diff -urN linux-2.6.0-test5-bk/drivers/net/arm/Kconfig linux/drivers/net/arm/Kconfig
--- linux-2.6.0-test5-bk/drivers/net/arm/Kconfig 2003-07-27 13:09:19.000000000 -0400
+++ linux/drivers/net/arm/Kconfig 2003-09-26 10:05:13.144502872 -0400
@@ -5,6 +5,7 @@
config ARM_AM79C961A
bool "ARM EBSA110 AM79C961A support"
depends on NET_ETHERNET && ARM && ARCH_EBSA110
+ select CRC32
help
If you wish to compile a kernel for the EBSA-110, then you should
always answer Y to this.
@@ -26,6 +27,7 @@
config ARM_ETHERH
tristate "I-cubed EtherH/ANT EtherM support"
depends on NET_ETHERNET && ARM && ARCH_ACORN
+ select CRC32
help
If you have an Acorn system with one of these network cards, you
should say Y to this option if you wish to use it with Linux.
diff -urN linux-2.6.0-test5-bk/drivers/net/Kconfig linux/drivers/net/Kconfig
--- linux-2.6.0-test5-bk/drivers/net/Kconfig 2003-09-26 09:30:41.303470584 -0400
+++ linux/drivers/net/Kconfig 2003-09-26 10:04:21.413367200 -0400
@@ -215,6 +215,7 @@
config MACE
tristate "MACE (Power Mac ethernet) support"
depends on NET_ETHERNET && PPC_PMAC
+ select CRC32
help
Power Macintoshes and clones with Ethernet built-in on the
motherboard will usually use a MACE (Medium Access Control for
@@ -237,6 +238,7 @@
config BMAC
tristate "BMAC (G3 ethernet) support"
depends on NET_ETHERNET && PPC_PMAC
+ select CRC32
help
Say Y for support of BMAC Ethernet interfaces. These are used on G3
computers.
@@ -247,6 +249,7 @@
config OAKNET
tristate "National DP83902AV (Oak ethernet) support"
depends on NET_ETHERNET && PPC
+ select CRC32
help
Say Y if your machine has this type of Ethernet network card.
@@ -266,6 +269,7 @@
config A2065
tristate "A2065 support"
depends on NET_ETHERNET && ZORRO
+ select CRC32
help
If you have a Commodore A2065 Ethernet adapter, say Y. Otherwise,
say N.
@@ -276,6 +280,7 @@
config HYDRA
tristate "Hydra support"
depends on NET_ETHERNET && ZORRO
+ select CRC32
help
If you have a Hydra Ethernet adapter, say Y. Otherwise, say N.
@@ -285,6 +290,7 @@
config ZORRO8390
tristate "Zorro NS8390-based Ethernet support"
depends on NET_ETHERNET && ZORRO
+ select CRC32
help
This driver is for Zorro Ethernet cards using an NS8390-compatible
chipset, like the Village Tronic Ariadne II and the Individual
@@ -297,6 +303,7 @@
config APNE
tristate "PCMCIA NE2000 support"
depends on NETDEVICES && AMIGA_PCMCIA
+ select CRC32
help
If you have a PCMCIA NE2000 compatible adapter, say Y. Otherwise,
say N.
@@ -316,6 +323,7 @@
config MAC8390
bool "Macintosh NS 8390 based ethernet cards"
depends on NETDEVICES && MAC
+ select CRC32
help
If you want to include a driver to support Nubus or LC-PDS
Ethernet cards using an NS8390 chipset or its equivalent, say Y
@@ -352,6 +360,7 @@
config MACMACE
bool "Macintosh (AV) onboard MACE ethernet (EXPERIMENTAL)"
depends on NETDEVICES && MAC && EXPERIMENTAL
+ select CRC32
help
Support for the onboard AMD 79C940 MACE Ethernet controller used in
the 660AV and 840AV Macintosh. If you have one of these Macintoshes
@@ -361,6 +370,7 @@
config MVME147_NET
tristate "MVME147 (Lance) Ethernet support"
depends on NETDEVICES && MVME147
+ select CRC32
help
Support for the on-board Ethernet interface on the Motorola MVME147
single-board computer. Say Y here to include the
@@ -434,6 +444,7 @@
config HPLANCE
bool "HP on-board LANCE support"
depends on NETDEVICES && HP300
+ select CRC32
help
If you want to use the builtin "LANCE" Ethernet controller on an
HP300 machine, say Y here.
@@ -461,6 +472,7 @@
config MIPS_AU1X00_ENET
bool "MIPS AU1000 Ethernet support"
depends on NET_ETHERNET && SOC_AU1X00
+ select CRC32
help
If you have an Alchemy Semi AU1X00 based system
say Y. Otherwise, say N.
@@ -472,6 +484,7 @@
config SGI_IOC3_ETH
bool "SGI IOC3 Ethernet"
depends on NET_ETHERNET && SGI_IP27
+ select CRC32
help
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
@@ -484,6 +497,7 @@
config STNIC
tristate "National DP83902AV support"
depends on NET_ETHERNET && SUPERH
+ select CRC32
help
Support for cards based on the National Semiconductor DP83902AV
ST-NIC Serial Network Interface Controller for Twisted Pair. This
@@ -495,6 +509,7 @@
config SUNLANCE
tristate "Sun LANCE support"
depends on NET_ETHERNET && SBUS
+ select CRC32
help
This driver supports the "le" interface present on all 32-bit Sparc
systems, on some older Ultra systems and as an Sbus option. These
@@ -507,6 +522,7 @@
config HAPPYMEAL
tristate "Sun Happy Meal 10/100baseT support"
depends on NET_ETHERNET && (SBUS || PCI)
+ select CRC32
help
This driver supports the "hme" interface present on most Ultra
systems and as an option on older Sbus systems. This driver supports
@@ -519,6 +535,7 @@
config SUNBMAC
tristate "Sun BigMAC 10/100baseT support (EXPERIMENTAL)"
depends on NET_ETHERNET && SBUS && EXPERIMENTAL
+ select CRC32
help
This driver supports the "be" interface available as an Sbus option.
This is Sun's older 100baseT Ethernet device.
@@ -529,6 +546,7 @@
config SUNQE
tristate "Sun QuadEthernet support"
depends on NET_ETHERNET && SBUS
+ select CRC32
help
This driver supports the "qe" 10baseT Ethernet device, available as
an Sbus option. Note that this is not the same as Quad FastEthernet
@@ -540,6 +558,7 @@
config SUNGEM
tristate "Sun GEM support"
depends on NET_ETHERNET && PCI
+ select CRC32
help
Support for the Sun GEM chip, aka Sun GigabitEthernet/P 2.0. See also
<http://www.sun.com/products-n-solutions/hardware/docs/pdf/806-3985-10.pdf>.
@@ -575,6 +594,7 @@
config EL2
tristate "3c503 \"EtherLink II\" support"
depends on NET_VENDOR_3COM && ISA
+ select CRC32
help
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
@@ -686,6 +706,7 @@
config TYPHOON
tristate "3cr990 series \"Typhoon\" support"
depends on NET_VENDOR_3COM && PCI
+ select CRC32
---help---
This option enables driver support for the 3cr990 series of cards:
@@ -729,6 +750,7 @@
config WD80x3
tristate "WD80*3 support"
depends on NET_VENDOR_SMC && ISA
+ select CRC32
help
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
@@ -741,6 +763,7 @@
config ULTRAMCA
tristate "SMC Ultra MCA support"
depends on NET_VENDOR_SMC && MCA
+ select CRC32
help
If you have a network (Ethernet) card of this type and are running
an MCA based system (PS/2), say Y and read the Ethernet-HOWTO,
@@ -753,6 +776,7 @@
config ULTRA
tristate "SMC Ultra support"
depends on NET_VENDOR_SMC && ISA
+ select CRC32
---help---
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
@@ -772,6 +796,7 @@
config ULTRA32
tristate "SMC Ultra32 EISA support"
depends on NET_VENDOR_SMC && EISA
+ select CRC32
help
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
@@ -784,6 +809,7 @@
config SMC9194
tristate "SMC 9194 support"
depends on NET_VENDOR_SMC && (ISA || MAC)
+ select CRC32
---help---
This is support for the SMC9xxx based Ethernet cards. Choose this
option if you have a DELL laptop with the docking station, or
@@ -851,6 +877,7 @@
config AT1700
tristate "AT1700/1720/RE1000Plus(C-Bus) support (EXPERIMENTAL)"
depends on NET_ETHERNET && (ISA || MCA) && EXPERIMENTAL
+ select CRC32
---help---
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
@@ -863,6 +890,7 @@
config DEPCA
tristate "DEPCA, DE10x, DE200, DE201, DE202, DE422 support"
depends on NET_ETHERNET && (ISA || EISA || MCA)
+ select CRC32
---help---
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
@@ -905,6 +933,7 @@
config E2100
tristate "Cabletron E21xx support"
depends on NET_ISA
+ select CRC32
help
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
@@ -917,6 +946,7 @@
config EWRK3
tristate "EtherWORKS 3 (DE203, DE204, DE205) support"
depends on NET_ISA
+ select CRC32
---help---
This driver supports the DE203, DE204 and DE205 network (Ethernet)
cards. If this is for you, say Y and read
@@ -975,6 +1005,7 @@
config HPLAN_PLUS
tristate "HP PCLAN+ (27247B and 27252A) support"
depends on NET_ISA
+ select CRC32
help
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
@@ -987,6 +1018,7 @@
config HPLAN
tristate "HP PCLAN (27245 and other 27xxx series) support"
depends on NET_ISA
+ select CRC32
help
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
@@ -1019,6 +1051,7 @@
config NE2000
tristate "NE2000/NE1000 support"
depends on NET_ISA || (Q40 && m)
+ select CRC32
---help---
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
@@ -1076,6 +1109,7 @@
config NE2K_CBUS
tristate "Most NE2000-based Ethernet support"
depends on NET_CBUS
+ select CRC32
config NE2K_CBUS_EGY98
bool "Melco EGY-98 support"
@@ -1132,6 +1166,7 @@
config NE2_MCA
tristate "NE/2 (ne2000 MCA version) support"
depends on NET_ETHERNET && MCA
+ select CRC32
help
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
@@ -1174,6 +1209,7 @@
config PCNET32
tristate "AMD PCnet32 PCI support"
depends on NET_PCI && PCI
+ select CRC32
help
If you have a PCnet32 or PCnetPCI based network (Ethernet) card,
answer Y here and read the Ethernet-HOWTO, available from
@@ -1186,6 +1222,7 @@
config AMD8111_ETH
tristate "AMD 8111 (new PCI lance) support"
depends on NET_PCI && PCI
+ select CRC32
help
If you have an AMD 8111-based PCI lance ethernet card,
answer Y here and read the Ethernet-HOWTO, available from
@@ -1198,6 +1235,7 @@
config ADAPTEC_STARFIRE
tristate "Adaptec Starfire/DuraLAN support"
depends on NET_PCI && PCI
+ select CRC32
help
Say Y here if you have an Adaptec Starfire (or DuraLAN) PCI network
adapter. The DuraLAN chip is used on the 64 bit PCI boards from
@@ -1222,6 +1260,7 @@
config AC3200
tristate "Ansel Communications EISA 3200 support (EXPERIMENTAL)"
depends on NET_PCI && (ISA || EISA) && EXPERIMENTAL
+ select CRC32
help
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
@@ -1389,6 +1428,7 @@
config LNE390
tristate "Mylex EISA LNE390A/B support (EXPERIMENTAL)"
depends on NET_PCI && EISA && EXPERIMENTAL
+ select CRC32
help
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
@@ -1401,6 +1441,7 @@
config FEALNX
tristate "Myson MTD-8xx PCI Ethernet support"
depends on NET_PCI && PCI
+ select CRC32
help
Say Y here to support the Mysom MTD-800 family of PCI-based Ethernet
cards. Specifications and data at
@@ -1409,6 +1450,7 @@
config NATSEMI
tristate "National Semiconductor DP8381x series PCI Ethernet support"
depends on NET_PCI && PCI
+ select CRC32
help
This driver is for the National Semiconductor DP83810 series,
which is used in cards from PureData, NetGear, Linksys
@@ -1419,6 +1461,7 @@
config NE2K_PCI
tristate "PCI NE2000 and clones support (see help)"
depends on NET_PCI && PCI
+ select CRC32
---help---
This driver is for NE2000 compatible PCI cards. It will not work
with ISA NE2000 cards (they have their own driver, "NE2000/NE1000
@@ -1438,6 +1481,7 @@
config NE3210
tristate "Novell/Eagle/Microdyne NE3210 EISA support (EXPERIMENTAL)"
depends on NET_PCI && EISA && EXPERIMENTAL
+ select CRC32
---help---
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
@@ -1451,6 +1495,7 @@
config ES3210
tristate "Racal-Interlan EISA ES3210 support (EXPERIMENTAL)"
depends on NET_PCI && EISA && EXPERIMENTAL
+ select CRC32
help
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
@@ -1463,6 +1508,7 @@
config 8139CP
tristate "RealTek RTL-8139 C+ PCI Fast Ethernet Adapter support (EXPERIMENTAL)"
depends on NET_PCI && PCI && EXPERIMENTAL
+ select CRC32
help
This is a driver for the Fast Ethernet PCI network cards based on
the RTL8139C+ chips. If you have one of those, say Y and read
@@ -1475,6 +1521,7 @@
config 8139TOO
tristate "RealTek RTL-8139 PCI Fast Ethernet Adapter support"
depends on NET_PCI && PCI
+ select CRC32
---help---
This is a driver for the Fast Ethernet PCI network cards based on
the RTL8139 chips. If you have one of those, say Y and read
@@ -1527,6 +1574,7 @@
config SIS900
tristate "SiS 900/7016 PCI Fast Ethernet Adapter support"
depends on NET_PCI && PCI
+ select CRC32
---help---
This is a driver for the Fast Ethernet PCI network cards based on
the SiS 900 and SiS 7016 chips. The SiS 900 core is also embedded in
@@ -1545,6 +1593,7 @@
config EPIC100
tristate "SMC EtherPower II"
depends on NET_PCI && PCI
+ select CRC32
help
This driver is for the SMC EtherPower II 9432 PCI Ethernet NIC,
which is based on the SMC83c17x (EPIC/100).
@@ -1554,6 +1603,7 @@
config SUNDANCE
tristate "Sundance Alta support"
depends on NET_PCI && PCI
+ select CRC32
help
This driver is for the Sundance "Alta" chip.
More specific information and updates are available from
@@ -1591,6 +1641,7 @@
config VIA_RHINE
tristate "VIA Rhine support"
depends on NET_PCI && PCI
+ select CRC32
help
If you have a VIA "rhine" based network card (Rhine-I (3043) or
Rhine-2 (VT86c100A)), say Y here.
@@ -1647,6 +1698,7 @@
config ATP
tristate "AT-LAN-TEC/RealTek pocket adapter support"
depends on NET_POCKET && ISA && X86
+ select CRC32
---help---
This is a network (Ethernet) device which attaches to your parallel
port. Read <file:drivers/net/atp.c> as well as the Ethernet-HOWTO,
@@ -1698,6 +1750,7 @@
config DECLANCE
tristate "DEC LANCE ethernet controller support"
depends on NET_ETHERNET && DECSTATION
+ select CRC32
help
This driver is for the series of Ethernet controllers produced by
DEC (now Compaq) based on the AMD Lance chipset, including the
@@ -1764,6 +1817,7 @@
config DL2K
tristate "D-Link DL2000-based Gigabit Ethernet support"
depends on PCI
+ select CRC32
help
This driver supports D-Link 2000-based gigabit ethernet cards, which
includes
@@ -1854,6 +1908,7 @@
config YELLOWFIN
tristate "Packet Engines Yellowfin Gigabit-NIC support (EXPERIMENTAL)"
depends on PCI && EXPERIMENTAL
+ select CRC32
---help---
Say Y here if you have a Packet Engines G-NIC PCI Gigabit Ethernet
adapter or the SYM53C885 Ethernet controller. The Gigabit adapter is
@@ -1867,6 +1922,7 @@
config R8169
tristate "Realtek 8169 gigabit ethernet support"
depends on PCI
+ select CRC32
---help---
Say Y here if you have a Realtek 8169 PCI Gigabit Ethernet adapter.
@@ -1876,6 +1932,7 @@
config SIS190
tristate "SiS190 gigabit ethernet support (EXPERIMENTAL)"
depends on PCI && EXPERIMENTAL
+ select CRC32
---help---
Say Y here if you have a SiS 190 PCI Gigabit Ethernet adapter.
diff -urN linux-2.6.0-test5-bk/drivers/net/Makefile.lib linux/drivers/net/Makefile.lib
--- linux-2.6.0-test5-bk/drivers/net/Makefile.lib 2003-09-13 00:00:01.000000000 -0400
+++ linux/drivers/net/Makefile.lib 1969-12-31 19:00:00.000000000 -0500
@@ -1,76 +0,0 @@
-# These drivers all require crc32.o
-obj-$(CONFIG_8139CP) += crc32.o
-obj-$(CONFIG_8139TOO) += crc32.o
-obj-$(CONFIG_A2065) += crc32.o
-obj-$(CONFIG_ARM_AM79C961A) += crc32.o
-obj-$(CONFIG_AT1700) += crc32.o
-obj-$(CONFIG_ATP) += crc32.o
-obj-$(CONFIG_BMAC) += crc32.o
-obj-$(CONFIG_DE2104X) += crc32.o
-obj-$(CONFIG_DE4X5) += crc32.o
-obj-$(CONFIG_DECLANCE) += crc32.o
-obj-$(CONFIG_DEPCA) += crc32.o
-obj-$(CONFIG_DL2K) += crc32.o
-obj-$(CONFIG_DM9102) += crc32.o
-obj-$(CONFIG_EPIC100) += crc32.o
-obj-$(CONFIG_EWRK3) += crc32.o
-obj-$(CONFIG_FEALNX) += crc32.o
-obj-$(CONFIG_HAPPYMEAL) += crc32.o
-obj-$(CONFIG_MACE) += crc32.o
-obj-$(CONFIG_MACMACE) += crc32.o
-obj-$(CONFIG_MIPS_AU1000_ENET) += crc32.o
-obj-$(CONFIG_NATSEMI) += crc32.o
-obj-$(CONFIG_NE2K_CBUS) += crc32.o
-obj-$(CONFIG_PCMCIA_FMVJ18X) += crc32.o
-obj-$(CONFIG_PCMCIA_SMC91C92) += crc32.o
-obj-$(CONFIG_PCMCIA_XIRTULIP) += crc32.o
-obj-$(CONFIG_PCNET32) += crc32.o
-obj-$(CONFIG_SGI_IOC3_ETH) += crc32.o
-obj-$(CONFIG_SIS190) += crc32.o
-obj-$(CONFIG_SIS900) += crc32.o
-obj-$(CONFIG_SMC9194) += crc32.o
-obj-$(CONFIG_ADAPTEC_STARFIRE) += crc32.o
-obj-$(CONFIG_SUNBMAC) += crc32.o
-obj-$(CONFIG_SUNDANCE) += crc32.o
-obj-$(CONFIG_SUNGEM) += crc32.o
-obj-$(CONFIG_SUNGEM) += crc32.o
-obj-$(CONFIG_SUNLANCE) += crc32.o
-obj-$(CONFIG_SUNQE) += crc32.o
-obj-$(CONFIG_TULIP) += crc32.o
-obj-$(CONFIG_TYPHOON) += crc32.o
-obj-$(CONFIG_VIA_RHINE) += crc32.o
-obj-$(CONFIG_YELLOWFIN) += crc32.o
-obj-$(CONFIG_WINBOND_840) += crc32.o
-obj-$(CONFIG_R8169) += crc32.o
-obj-$(CONFIG_AMD8111_ETH) += crc32.o
-
-
-# These rely on drivers/net/7990.o which requires crc32.o
-obj-$(CONFIG_HPLANCE) += crc32.o
-obj-$(CONFIG_MVME147_NET) += crc32.o
-
-
-# These rely on drivers/net/8390.o which requires crc32.o
-obj-$(CONFIG_OAKNET) += crc32.o
-obj-$(CONFIG_NE2K_PCI) += crc32.o
-obj-$(CONFIG_STNIC) += crc32.o
-obj-$(CONFIG_MAC8390) += crc32.o
-obj-$(CONFIG_APNE) += crc32.o
-obj-$(CONFIG_PCMCIA_PCNET) += crc32.o
-obj-$(CONFIG_ARM_ETHERH) += crc32.o
-obj-$(CONFIG_WD80x3) += crc32.o
-obj-$(CONFIG_EL2) += crc32.o
-obj-$(CONFIG_NE2000) += crc32.o
-obj-$(CONFIG_NE2_MCA) += crc32.o
-obj-$(CONFIG_HPLAN) += crc32.o
-obj-$(CONFIG_HPLAN_PLUS) += crc32.o
-obj-$(CONFIG_ULTRA) += crc32.o
-obj-$(CONFIG_ULTRAMCA) += crc32.o
-obj-$(CONFIG_ULTRA32) += crc32.o
-obj-$(CONFIG_E2100) += crc32.o
-obj-$(CONFIG_ES3210) += crc32.o
-obj-$(CONFIG_LNE390) += crc32.o
-obj-$(CONFIG_NE3210) += crc32.o
-obj-$(CONFIG_AC3200) += crc32.o
-obj-$(CONFIG_ZORRO8390) += crc32.o
-obj-$(CONFIG_HYDRA) += crc32.o
diff -urN linux-2.6.0-test5-bk/drivers/net/pcmcia/Kconfig linux/drivers/net/pcmcia/Kconfig
--- linux-2.6.0-test5-bk/drivers/net/pcmcia/Kconfig 2003-09-26 09:30:41.847387896 -0400
+++ linux/drivers/net/pcmcia/Kconfig 2003-09-26 10:06:10.701752840 -0400
@@ -44,6 +44,7 @@
config PCMCIA_FMVJ18X
tristate "Fujitsu FMV-J18x PCMCIA support"
depends on NET_PCMCIA && PCMCIA
+ select CRC32
help
Say Y here if you intend to attach a Fujitsu FMV-J18x or compatible
PCMCIA (PC-card) Ethernet card to your computer.
@@ -54,6 +55,7 @@
config PCMCIA_PCNET
tristate "NE2000 compatible PCMCIA support"
depends on NET_PCMCIA && PCMCIA
+ select CRC32
help
Say Y here if you intend to attach an NE2000 compatible PCMCIA
(PC-card) Ethernet or Fast Ethernet card to your computer.
@@ -74,6 +76,7 @@
config PCMCIA_SMC91C92
tristate "SMC 91Cxx PCMCIA support"
depends on NET_PCMCIA && PCMCIA
+ select CRC32
help
Say Y here if you intend to attach an SMC 91Cxx compatible PCMCIA
(PC-card) Ethernet or Fast Ethernet card to your computer.
diff -urN linux-2.6.0-test5-bk/drivers/net/tulip/Kconfig linux/drivers/net/tulip/Kconfig
--- linux-2.6.0-test5-bk/drivers/net/tulip/Kconfig 2003-09-26 09:30:42.218331504 -0400
+++ linux/drivers/net/tulip/Kconfig 2003-09-26 10:07:49.673706816 -0400
@@ -13,6 +13,7 @@
config DE2104X
tristate "Early DECchip Tulip (dc2104x) PCI support (EXPERIMENTAL)"
depends on NET_TULIP && PCI && EXPERIMENTAL
+ select CRC32
---help---
This driver is developed for the SMC EtherPower series Ethernet
cards and also works with cards based on the DECchip
@@ -30,6 +31,7 @@
config TULIP
tristate "DECchip Tulip (dc2114x) PCI support"
depends on NET_TULIP && PCI
+ select CRC32
---help---
This driver is developed for the SMC EtherPower series Ethernet
cards and also works with cards based on the DECchip
@@ -69,6 +71,7 @@
config DE4X5
tristate "Generic DECchip & DIGITAL EtherWORKS PCI/EISA"
depends on NET_TULIP && (PCI || EISA)
+ select CRC32
---help---
This is support for the DIGITAL series of PCI/EISA Ethernet cards.
These include the DE425, DE434, DE435, DE450 and DE500 models. If
@@ -85,6 +88,7 @@
config WINBOND_840
tristate "Winbond W89c840 Ethernet support"
depends on NET_TULIP && PCI
+ select CRC32
help
This driver is for the Winbond W89c840 chip. It also works with
the TX9882 chip on the Compex RL100-ATX board.
@@ -94,6 +98,7 @@
config DM9102
tristate "Davicom DM910x/DM980x support"
depends on NET_TULIP && PCI
+ select CRC32
---help---
This driver is for DM9102(A)/DM9132/DM9801 compatible PCI cards from
Davicom (<http://www.davicom.com.tw/>). If you have such a network
@@ -120,6 +125,7 @@
config PCMCIA_XIRTULIP
tristate "Xircom Tulip-like CardBus support (old driver)"
depends on NET_TULIP && CARDBUS && BROKEN_ON_SMP
+ select CRC32
---help---
This driver is for the Digital "Tulip" Ethernet CardBus adapters.
It should work with most DEC 21*4*-based chips/ethercards, as well
diff -urN linux-2.6.0-test5-bk/drivers/usb/Makefile.lib linux/drivers/usb/Makefile.lib
--- linux-2.6.0-test5-bk/drivers/usb/Makefile.lib 2003-09-26 09:30:43.216179808 -0400
+++ linux/drivers/usb/Makefile.lib 1969-12-31 19:00:00.000000000 -0500
@@ -1,3 +0,0 @@
-obj-$(CONFIG_USB_CATC) += crc32.o
-obj-$(CONFIG_USB_SPEEDTOUCH) += crc32.o
-obj-$(CONFIG_USB_USBNET) += crc32.o
diff -urN linux-2.6.0-test5-bk/drivers/usb/misc/Kconfig linux/drivers/usb/misc/Kconfig
--- linux-2.6.0-test5-bk/drivers/usb/misc/Kconfig 2003-09-26 09:30:43.419148952 -0400
+++ linux/drivers/usb/misc/Kconfig 2003-09-26 10:13:32.297620064 -0400
@@ -84,6 +84,7 @@
config USB_SPEEDTOUCH
tristate "Alcatel Speedtouch USB support"
depends on USB && ATM
+ select CRC32
help
Say Y here if you have an Alcatel SpeedTouch USB or SpeedTouch 330
modem. In order to use your modem you will need to install some user
diff -urN linux-2.6.0-test5-bk/drivers/usb/net/Kconfig linux/drivers/usb/net/Kconfig
--- linux-2.6.0-test5-bk/drivers/usb/net/Kconfig 2003-09-26 09:30:43.514134512 -0400
+++ linux/drivers/usb/net/Kconfig 2003-09-26 10:13:41.251258904 -0400
@@ -10,6 +10,7 @@
config USB_CATC
tristate "USB CATC NetMate-based Ethernet device support (EXPERIMENTAL)"
depends on USB && NET && EXPERIMENTAL
+ select CRC32
---help---
Say Y if you want to use one of the following 10Mbps USB Ethernet
device based on the EL1210A chip. Supported devices are:
@@ -94,6 +95,7 @@
config USB_USBNET
tristate "Multi-purpose USB Networking Framework"
depends on USB && NET
+ select CRC32
---help---
This driver supports several kinds of network links over USB,
with "minidrivers" built around a common network driver core
diff -urN linux-2.6.0-test5-bk/fs/Kconfig linux/fs/Kconfig
--- linux-2.6.0-test5-bk/fs/Kconfig 2003-09-26 09:30:44.235024920 -0400
+++ linux/fs/Kconfig 2003-09-26 10:15:11.029610520 -0400
@@ -1046,6 +1046,7 @@
config JFFS2_FS
tristate "Journalling Flash File System v2 (JFFS2) support"
depends on MTD
+ select CRC32
help
JFFS2 is the second generation of the Journalling Flash File System
for use on diskless embedded devices. It provides improved wear
diff -urN linux-2.6.0-test5-bk/fs/Makefile.lib linux/fs/Makefile.lib
--- linux-2.6.0-test5-bk/fs/Makefile.lib 2003-07-27 12:57:15.000000000 -0400
+++ linux/fs/Makefile.lib 1969-12-31 19:00:00.000000000 -0500
@@ -1,2 +0,0 @@
-obj-$(CONFIG_JFFS2_FS) += crc32.o
-obj-$(CONFIG_EFI_PARTITION) += crc32.o
diff -urN linux-2.6.0-test5-bk/fs/partitions/Kconfig linux/fs/partitions/Kconfig
--- linux-2.6.0-test5-bk/fs/partitions/Kconfig 2003-07-27 13:08:29.000000000 -0400
+++ linux/fs/partitions/Kconfig 2003-09-26 10:15:42.318853832 -0400
@@ -227,6 +227,7 @@
config EFI_PARTITION
bool "EFI GUID Partition support"
depends on PARTITION_ADVANCED
+ select CRC32
help
Say Y here if you would like to use hard disks under Linux which
were partitioned using EFI GPT. Presently only useful on the
diff -urN linux-2.6.0-test5-bk/lib/Makefile linux/lib/Makefile
--- linux-2.6.0-test5-bk/lib/Makefile 2003-07-27 12:57:00.000000000 -0400
+++ linux/lib/Makefile 2003-09-26 10:17:10.076512640 -0400
@@ -20,12 +20,6 @@
obj-$(CONFIG_ZLIB_INFLATE) += zlib_inflate/
obj-$(CONFIG_ZLIB_DEFLATE) += zlib_deflate/
-include drivers/net/Makefile.lib
-include drivers/usb/Makefile.lib
-include fs/Makefile.lib
-include net/bluetooth/bnep/Makefile.lib
-include drivers/media/dvb/dvb-core/Makefile.lib
-
host-progs := gen_crc32table
clean-files := crc32table.h
diff -urN linux-2.6.0-test5-bk/net/bluetooth/bnep/Kconfig linux/net/bluetooth/bnep/Kconfig
--- linux-2.6.0-test5-bk/net/bluetooth/bnep/Kconfig 2003-07-27 13:11:40.000000000 -0400
+++ linux/net/bluetooth/bnep/Kconfig 2003-09-26 10:16:49.961570576 -0400
@@ -1,6 +1,7 @@
config BT_BNEP
tristate "BNEP protocol support"
depends on BT && BT_L2CAP
+ select CRC32
help
BNEP (Bluetooth Network Encapsulation Protocol) is Ethernet
emulation layer on top of Bluetooth. BNEP is required for Bluetooth
diff -urN linux-2.6.0-test5-bk/net/bluetooth/bnep/Makefile.lib linux/net/bluetooth/bnep/Makefile.lib
--- linux-2.6.0-test5-bk/net/bluetooth/bnep/Makefile.lib 2003-07-27 13:12:05.000000000 -0400
+++ linux/net/bluetooth/bnep/Makefile.lib 1969-12-31 19:00:00.000000000 -0500
@@ -1 +0,0 @@
-obj-$(CONFIG_BT_BNEP) += crc32.o
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2003-09-27 5:13 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2003-09-26 22:43 [PATCH] select CRC32 Brian Gerst
2003-09-27 5:13 ` Sam Ravnborg
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®