* [PATCH][4/6] A different KGDB stub
@ 2004-02-12 0:03 Tom Rini
0 siblings, 0 replies; 2+ messages in thread
From: Tom Rini @ 2004-02-12 0:03 UTC (permalink / raw)
To: Andrew Morton, Kernel Mailing List
The following is the i386-specific bits to this KGDB stub.
arch/i386/Kconfig | 2
arch/i386/kernel/Makefile | 1
arch/i386/kernel/entry.S | 39 +++
arch/i386/kernel/i386-stub.c | 442 +++++++++++++++++++++++++++++++++++++++++++
arch/i386/kernel/irq.c | 9
arch/i386/kernel/nmi.c | 14 +
arch/i386/kernel/signal.c | 3
arch/i386/kernel/traps.c | 20 +
arch/i386/mm/fault.c | 15 +
include/asm-i386/kgdb.h | 53 +++++
include/asm-i386/processor.h | 1
11 files changed, 586 insertions(+), 13 deletions(-)
--- a/arch/i386/Kconfig Wed Feb 11 15:41:51 2004
+++ b/arch/i386/Kconfig Wed Feb 11 15:41:51 2004
@@ -1361,6 +1361,8 @@
If you say Y here, various routines which may sleep will become very
noisy if they are called with a spinlock held.
+source "kernel/Kconfig.kgdb"
+
config FRAME_POINTER
bool "Compile the kernel with frame pointers"
help
--- a/arch/i386/kernel/Makefile Wed Feb 11 15:41:51 2004
+++ b/arch/i386/kernel/Makefile Wed Feb 11 15:41:51 2004
@@ -32,6 +32,7 @@
obj-$(CONFIG_HPET_TIMER) += time_hpet.o
obj-$(CONFIG_EFI) += efi.o efi_stub.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
+obj-$(CONFIG_KGDB) += i386-stub.o
EXTRA_AFLAGS := -traditional
--- a/arch/i386/kernel/entry.S Wed Feb 11 15:41:51 2004
+++ b/arch/i386/kernel/entry.S Wed Feb 11 15:41:51 2004
@@ -330,7 +330,7 @@
jz restore_all
movl $PREEMPT_ACTIVE,TI_preempt_count(%ebp)
sti
- call schedule
+ call user_schedule
movl $0,TI_preempt_count(%ebp)
cli
jmp need_resched
@@ -438,7 +438,7 @@
testb $_TIF_NEED_RESCHED, %cl
jz work_notifysig
work_resched:
- call schedule
+ call user_schedule
cli # make sure we don't miss an interrupt
# setting need_resched or sigpending
# between sampling and the iret
@@ -545,7 +545,17 @@
ALIGN
common_interrupt:
SAVE_ALL
+ movl %esp, %eax
+/* Create a fake function call followed by a fake function prologue to fool
+ * gdb into believing that this is a normal function call. */
+ pushl EIP(%eax)
+
+common_interrupt_1:
+ pushl %ebp
+ movl %esp, %ebp
+ pushl %eax
call do_IRQ
+ addl $12, %esp
jmp ret_from_intr
#define BUILD_INTERRUPT(name, nr) \
@@ -758,6 +768,31 @@
jmp error_code
.previous
+
+#ifdef CONFIG_KGDB_THREAD
+ENTRY(kern_schedule)
+ pushl %ebp
+ movl %esp, %ebp
+ pushl %ss
+ pushl %ebp
+ pushfl
+ pushl %cs
+ pushl 4(%ebp)
+ pushl %eax
+ pushl %es
+ pushl %ds
+ pushl %eax
+ pushl (%ebp)
+ pushl %edi
+ pushl %esi
+ pushl %edx
+ pushl %ecx
+ pushl %ebx
+ call kern_do_schedule
+ movl %ebp, %esp
+ pop %ebp
+ ret
+#endif
.data
ENTRY(sys_call_table)
--- /dev/null Wed Dec 31 16:00:00 1969
+++ b/arch/i386/kernel/i386-stub.c Wed Feb 11 15:41:51 2004
@@ -0,0 +1,442 @@
+/*
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ */
+
+/*
+ * Copyright (C) 2000-2001 VERITAS Software Corporation.
+ */
+/****************************************************************************
+ * Header: remcom.c,v 1.34 91/03/09 12:29:49 glenne Exp $
+ *
+ * Module name: remcom.c $
+ * Revision: 1.34 $
+ * Date: 91/03/09 12:29:49 $
+ * Contributor: Lake Stevens Instrument Division$
+ *
+ * Description: low level support for gdb debugger. $
+ *
+ * Considerations: only works on target hardware $
+ *
+ * Written by: Glenn Engel $
+ * Updated by: Amit Kale<akale@veritas.com>
+ * ModuleState: Experimental $
+ *
+ * NOTES: See Below $
+ *
+ * Modified for 386 by Jim Kingdon, Cygnus Support.
+ * Origianl kgdb, compatibility with 2.1.xx kernel by David Grothe <dave@gcom.com>
+ * Integrated into 2.2.5 kernel by Tigran Aivazian <tigran@sco.com>
+ * thread support,
+ * support for multiple processors,
+ * support for ia-32(x86) hardware debugging,
+ * Console support,
+ * handling nmi watchdog
+ * Amit S. Kale ( amitkale@emsyssoft.com )
+ *
+ *
+ * To enable debugger support, two things need to happen. One, a
+ * call to set_debug_traps() is necessary in order to allow any breakpoints
+ * or error conditions to be properly intercepted and reported to gdb.
+ * Two, a breakpoint needs to be generated to begin communication. This
+ * is most easily accomplished by a call to breakpoint(). Breakpoint()
+ * simulates a breakpoint by executing an int 3.
+ *
+ *************
+ *
+ * The following gdb commands are supported:
+ *
+ * command function Return value
+ *
+ * g return the value of the CPU registers hex data or ENN
+ * G set the value of the CPU registers OK or ENN
+ *
+ * mAA..AA,LLLL Read LLLL bytes at address AA..AA hex data or ENN
+ * MAA..AA,LLLL: Write LLLL bytes at address AA.AA OK or ENN
+ *
+ * c Resume at current address SNN ( signal NN)
+ * cAA..AA Continue at address AA..AA SNN
+ *
+ * s Step one instruction SNN
+ * sAA..AA Step one instruction from AA..AA SNN
+ *
+ * k kill
+ *
+ * ? What was the last sigval ? SNN (signal NN)
+ *
+ * All commands and responses are sent with a packet which includes a
+ * checksum. A packet consists of
+ *
+ * $<packet info>#<checksum>.
+ *
+ * where
+ * <packet info> :: <characters representing the command or response>
+ * <checksum> :: < two hex digits computed as modulo 256 sum of <packetinfo>>
+ *
+ * When a packet is received, it is first acknowledged with either '+' or '-'.
+ * '+' indicates a successful transfer. '-' indicates a failed transfer.
+ *
+ * Example:
+ *
+ * Host: Reply:
+ * $m0,10#2a +$00010203040506070809101112131415#42
+ *
+ ****************************************************************************/
+
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/smp.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <asm/vm86.h>
+#include <asm/system.h>
+#include <asm/ptrace.h> /* for linux pt_regs struct */
+#include <linux/kgdb.h>
+#ifdef CONFIG_GDB_CONSOLE
+#include <linux/console.h>
+#endif
+#include <linux/init.h>
+#include <linux/debugger.h>
+
+/* Put the error code here just in case the user cares. */
+int gdb_i386errcode;
+/* Likewise, the vector number here (since GDB only gets the signal
+ number through the usual means, and that's not very specific). */
+int gdb_i386vector = -1;
+
+#if KGDB_MAX_NO_CPUS != 8
+#error change the definition of slavecpulocks
+#endif
+
+void regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs)
+{
+ gdb_regs[_EAX] = regs->eax;
+ gdb_regs[_EBX] = regs->ebx;
+ gdb_regs[_ECX] = regs->ecx;
+ gdb_regs[_EDX] = regs->edx;
+ gdb_regs[_ESI] = regs->esi;
+ gdb_regs[_EDI] = regs->edi;
+ gdb_regs[_EBP] = regs->ebp;
+ gdb_regs[ _DS] = regs->xds;
+ gdb_regs[ _ES] = regs->xes;
+ gdb_regs[ _PS] = regs->eflags;
+ gdb_regs[ _CS] = regs->xcs;
+ gdb_regs[ _PC] = regs->eip;
+ gdb_regs[_ESP] = (int) (®s->esp) ;
+ gdb_regs[ _SS] = __KERNEL_DS;
+ gdb_regs[ _FS] = 0xFFFF;
+ gdb_regs[ _GS] = 0xFFFF;
+}
+
+void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p)
+{
+ gdb_regs[_EAX] = 0;
+ gdb_regs[_EBX] = 0;
+ gdb_regs[_ECX] = 0;
+ gdb_regs[_EDX] = 0;
+ gdb_regs[_ESI] = 0;
+ gdb_regs[_EDI] = 0;
+ gdb_regs[_EBP] = *(int *)p->thread.esp;
+ gdb_regs[_DS] = __KERNEL_DS;
+ gdb_regs[_ES] = __KERNEL_DS;
+ gdb_regs[_PS] = 0;
+ gdb_regs[_CS] = __KERNEL_CS;
+ gdb_regs[_PC] = p->thread.eip;
+ gdb_regs[_ESP] = p->thread.esp;
+ gdb_regs[_SS] = __KERNEL_DS;
+ gdb_regs[_FS] = 0xFFFF;
+ gdb_regs[_GS] = 0xFFFF;
+}
+
+void gdb_regs_to_regs(unsigned long *gdb_regs, struct pt_regs *regs)
+{
+ regs->eax = gdb_regs[_EAX] ;
+ regs->ebx = gdb_regs[_EBX] ;
+ regs->ecx = gdb_regs[_ECX] ;
+ regs->edx = gdb_regs[_EDX] ;
+ regs->esi = gdb_regs[_ESI] ;
+ regs->edi = gdb_regs[_EDI] ;
+ regs->ebp = gdb_regs[_EBP] ;
+ regs->xds = gdb_regs[ _DS] ;
+ regs->xes = gdb_regs[ _ES] ;
+ regs->eflags= gdb_regs[ _PS] ;
+ regs->xcs = gdb_regs[ _CS] ;
+ regs->eip = gdb_regs[ _PC] ;
+#if 0 /* can't change these */
+ regs->esp = gdb_regs[_ESP] ;
+ regs->xss = gdb_regs[ _SS] ;
+ regs->fs = gdb_regs[ _FS] ;
+ regs->gs = gdb_regs[ _GS] ;
+#endif
+
+}
+
+struct hw_breakpoint {
+ unsigned enabled;
+ unsigned type;
+ unsigned len;
+ unsigned addr;
+} breakinfo[4] = { {
+enabled:0}, {
+enabled:0}, {
+enabled:0}, {
+enabled:0}};
+
+void kgdb_correct_hw_break(void)
+{
+ int breakno;
+ int correctit;
+ int breakbit;
+ unsigned dr7;
+
+ asm volatile ("movl %%db7, %0\n":"=r" (dr7)
+ :);
+ do {
+ unsigned addr0, addr1, addr2, addr3;
+ asm volatile ("movl %%db0, %0\n"
+ "movl %%db1, %1\n"
+ "movl %%db2, %2\n"
+ "movl %%db3, %3\n":"=r" (addr0), "=r"(addr1),
+ "=r"(addr2), "=r"(addr3):);
+ } while (0);
+ correctit = 0;
+ for (breakno = 0; breakno < 3; breakno++) {
+ breakbit = 2 << (breakno << 1);
+ if (!(dr7 & breakbit) && breakinfo[breakno].enabled) {
+ correctit = 1;
+ dr7 |= breakbit;
+ dr7 &= ~(0xf0000 << (breakno << 2));
+ dr7 |= (((breakinfo[breakno].len << 2) |
+ breakinfo[breakno].type) << 16) <<
+ (breakno << 2);
+ switch (breakno) {
+ case 0:
+ asm volatile ("movl %0, %%dr0\n"::"r"
+ (breakinfo[breakno].addr));
+ break;
+
+ case 1:
+ asm volatile ("movl %0, %%dr1\n"::"r"
+ (breakinfo[breakno].addr));
+ break;
+
+ case 2:
+ asm volatile ("movl %0, %%dr2\n"::"r"
+ (breakinfo[breakno].addr));
+ break;
+
+ case 3:
+ asm volatile ("movl %0, %%dr3\n"::"r"
+ (breakinfo[breakno].addr));
+ break;
+ }
+ } else if ((dr7 & breakbit) && !breakinfo[breakno].enabled) {
+ correctit = 1;
+ dr7 &= ~breakbit;
+ dr7 &= ~(0xf0000 << (breakno << 2));
+ }
+ }
+ if (correctit) {
+ asm volatile ("movl %0, %%db7\n"::"r" (dr7));
+ }
+}
+
+int kgdb_remove_hw_break(unsigned long addr, int type)
+{
+ int i, idx = -1;
+ for (i = 0; i < 4; i ++) {
+ if (breakinfo[i].addr == addr && breakinfo[i].enabled) {
+ idx = i;
+ break;
+ }
+ }
+ if (idx == -1)
+ return -1;
+
+ breakinfo[idx].enabled = 0;
+ return 0;
+}
+
+int kgdb_set_hw_break(unsigned long addr, int type)
+{
+ int i, idx = -1;
+ for (i = 0; i < 4; i ++) {
+ if (!breakinfo[i].enabled) {
+ idx = i;
+ break;
+ }
+ }
+ if (idx == -1)
+ return -1;
+
+ breakinfo[idx].enabled = 1;
+ breakinfo[idx].type = type;
+ breakinfo[idx].len = 1;
+ breakinfo[idx].addr = addr;
+ return 0;
+}
+
+int remove_hw_break(unsigned breakno)
+{
+ if (!breakinfo[breakno].enabled) {
+ return -1;
+ }
+ breakinfo[breakno].enabled = 0;
+ return 0;
+}
+
+int set_hw_break(unsigned breakno,
+ unsigned type, unsigned len, unsigned addr)
+{
+ if (breakinfo[breakno].enabled) {
+ return -1;
+ }
+ breakinfo[breakno].enabled = 1;
+ breakinfo[breakno].type = type;
+ breakinfo[breakno].len = len;
+ breakinfo[breakno].addr = addr;
+ return 0;
+}
+
+void kgdb_printexceptioninfo(int exceptionNo, int errorcode, char *buffer)
+{
+ unsigned dr6;
+ int i;
+ switch (exceptionNo) {
+ case 1: /* debug exception */
+ break;
+ case 3: /* breakpoint */
+ sprintf(buffer, "Software breakpoint");
+ return;
+ default:
+ sprintf(buffer, "Details not available");
+ return;
+ }
+ asm volatile ("movl %%db6, %0\n":"=r" (dr6)
+ :);
+ if (dr6 & 0x4000) {
+ sprintf(buffer, "Single step");
+ return;
+ }
+ for (i = 0; i < 4; ++i) {
+ if (dr6 & (1 << i)) {
+ sprintf(buffer, "Hardware breakpoint %d", i);
+ return;
+ }
+ }
+ sprintf(buffer, "Unknown trap");
+ return;
+}
+
+void kgdb_disable_hw_debug(struct pt_regs *regs)
+{
+ /* Disable hardware debugging while we are in kgdb */
+ asm volatile("movl %0,%%db7": /* no output */ : "r"(0));
+}
+
+void kgdb_post_master_code(struct pt_regs *regs, int eVector, int err_code)
+{
+ /* Master processor is completely in the debugger */
+ gdb_i386vector = eVector;
+ gdb_i386errcode = err_code;
+}
+
+int kgdb_arch_handle_exception(int exceptionVector, int signo,
+ int err_code, char *remcomInBuffer, char *remcomOutBuffer,
+ struct pt_regs *linux_regs)
+{
+ long addr, length;
+ long breakno, breaktype;
+ char *ptr;
+ int newPC;
+ int dr6;
+
+ switch (remcomInBuffer[0]) {
+ case 'c':
+ case 's':
+ if (kgdb_contthread && kgdb_contthread != current) {
+ strcpy(remcomOutBuffer, "E00");
+ break;
+ }
+
+ kgdb_contthread = NULL;
+
+ /* try to read optional parameter, pc unchanged if no parm */
+ ptr = &remcomInBuffer[1];
+ if (kgdb_hexToLong(&ptr, &addr)) {
+ linux_regs->eip = addr;
+ }
+ newPC = linux_regs->eip;
+
+ /* clear the trace bit */
+ linux_regs->eflags &= 0xfffffeff;
+
+ /* set the trace bit if we're stepping */
+ if (remcomInBuffer[0] == 's') {
+ linux_regs->eflags |= 0x100;
+ debugger_step = 1;
+ }
+
+ asm volatile ("movl %%db6, %0\n" : "=r" (dr6));
+ if (!(dr6 & 0x4000)) {
+ for (breakno = 0; breakno < 4; ++breakno) {
+ if (dr6 & (1 << breakno)) {
+ if (breakinfo[breakno].type == 0) {
+ /* Set restore flag */
+ linux_regs->eflags |= 0x10000;
+ break;
+ }
+ }
+ }
+ }
+ kgdb_correct_hw_break();
+ asm volatile ("movl %0, %%db6\n"::"r" (0));
+
+ return (0);
+
+ case 'Y':
+ ptr = &remcomInBuffer[1];
+ kgdb_hexToLong(&ptr, &breakno);
+ ptr++;
+ kgdb_hexToLong(&ptr, &breaktype);
+ ptr++;
+ kgdb_hexToLong(&ptr, &length);
+ ptr++;
+ kgdb_hexToLong(&ptr, &addr);
+ if (set_hw_break(breakno & 0x3, breaktype & 0x3,
+ length & 0x3, addr) == 0) {
+ strcpy(remcomOutBuffer, "OK");
+ } else {
+ strcpy(remcomOutBuffer, "ERROR");
+ }
+ break;
+
+ /* Remove hardware breakpoint */
+ case 'y':
+ ptr = &remcomInBuffer[1];
+ kgdb_hexToLong(&ptr, &breakno);
+ if (remove_hw_break(breakno & 0x3) == 0) {
+ strcpy(remcomOutBuffer, "OK");
+ } else {
+ strcpy(remcomOutBuffer, "ERROR");
+ }
+ break;
+
+ } /* switch */
+ return -1; /* this means that we do not want to exit from the handler */
+}
+
+struct kgdb_arch arch_kgdb_ops = {
+ .gdb_bpt_instr = {0xcc},
+ .flags = KGDB_HW_BREAKPOINT,
+};
--- a/arch/i386/kernel/irq.c Wed Feb 11 15:41:51 2004
+++ b/arch/i386/kernel/irq.c Wed Feb 11 15:41:51 2004
@@ -36,6 +36,7 @@
#include <linux/kallsyms.h>
#include <linux/notifier.h>
#include <linux/cpu.h>
+#include <linux/kgdb.h>
#include <asm/atomic.h>
#include <asm/io.h>
@@ -412,7 +413,7 @@
* SMP cross-CPU interrupts have their own specific
* handlers).
*/
-asmlinkage unsigned int do_IRQ(struct pt_regs regs)
+asmlinkage unsigned int do_IRQ(struct pt_regs *regs)
{
/*
* We ack quickly, we don't want the irq controller
@@ -424,7 +425,7 @@
* 0 return value means that this irq is already being
* handled by some other CPU. (or is disabled)
*/
- int irq = regs.orig_eax & 0xff; /* high bits used in ret_from_ code */
+ int irq = regs->orig_eax & 0xff; /* high bits used in ret_from_ code */
irq_desc_t *desc = irq_desc + irq;
struct irqaction * action;
unsigned int status;
@@ -490,7 +491,7 @@
irqreturn_t action_ret;
spin_unlock(&desc->lock);
- action_ret = handle_IRQ_event(irq, ®s, action);
+ action_ret = handle_IRQ_event(irq, regs, action);
spin_lock(&desc->lock);
if (!noirqdebug)
note_interrupt(irq, desc, action_ret);
@@ -509,6 +510,8 @@
spin_unlock(&desc->lock);
irq_exit();
+
+ kgdb_process_breakpoint();
return 1;
}
--- a/arch/i386/kernel/nmi.c Wed Feb 11 15:41:51 2004
+++ b/arch/i386/kernel/nmi.c Wed Feb 11 15:41:51 2004
@@ -25,6 +25,7 @@
#include <linux/module.h>
#include <linux/nmi.h>
#include <linux/sysdev.h>
+#include <linux/debugger.h>
#include <asm/smp.h>
#include <asm/mtrr.h>
@@ -420,14 +421,25 @@
int sum, cpu = smp_processor_id();
sum = irq_stat[cpu].apic_timer_irqs;
+ if (atomic_read(&debugger_active)) {
- if (last_irq_sums[cpu] == sum) {
+ /*
+ * The machine is in debugger, hold this cpu if already
+ * not held.
+ */
+ debugger_nmihook(cpu, regs);
+ alert_counter[cpu] = 0;
+
+ } else if (last_irq_sums[cpu] == sum) {
/*
* Ayiee, looks like this CPU is stuck ...
* wait a few IRQs (5 seconds) before doing the oops ...
*/
alert_counter[cpu]++;
if (alert_counter[cpu] == 5*nmi_hz) {
+
+ CHK_DEBUGGER(2,SIGSEGV,0,regs,)
+
spin_lock(&nmi_print_lock);
/*
* We are in trouble anyway, lets at least try
--- a/arch/i386/kernel/signal.c Wed Feb 11 15:41:51 2004
+++ b/arch/i386/kernel/signal.c Wed Feb 11 15:41:51 2004
@@ -578,7 +578,8 @@
* have been cleared if the watchpoint triggered
* inside the kernel.
*/
- __asm__("movl %0,%%db7" : : "r" (current->thread.debugreg[7]));
+ if (current->thread.debugreg[7])
+ __asm__("movl %0,%%db7" : : "r" (current->thread.debugreg[7]));
/* Whee! Actually deliver the signal. */
handle_signal(signr, &info, oldset, regs);
--- a/arch/i386/kernel/traps.c Wed Feb 11 15:41:51 2004
+++ b/arch/i386/kernel/traps.c Wed Feb 11 15:41:51 2004
@@ -51,6 +51,7 @@
#include <linux/irq.h>
#include <linux/module.h>
+#include <linux/debugger.h>
#include "mach_traps.h"
@@ -258,6 +259,7 @@
static int die_counter;
int nl = 0;
+ CHK_DEBUGGER(1,SIGTRAP,err,regs,)
console_verbose();
spin_lock_irq(&die_lock);
bust_spinlocks(1);
@@ -346,6 +348,7 @@
#define DO_ERROR(trapnr, signr, str, name) \
asmlinkage void do_##name(struct pt_regs * regs, long error_code) \
{ \
+ CHK_DEBUGGER(trapnr,signr,error_code,regs,)\
do_trap(trapnr, signr, str, 0, regs, error_code, NULL); \
}
@@ -363,7 +366,9 @@
#define DO_VM86_ERROR(trapnr, signr, str, name) \
asmlinkage void do_##name(struct pt_regs * regs, long error_code) \
{ \
+ CHK_DEBUGGER(trapnr,signr,error_code,regs,goto skip_trap)\
do_trap(trapnr, signr, str, 1, regs, error_code, NULL); \
+skip_trap: \
return; \
}
@@ -572,7 +577,7 @@
tsk->thread.debugreg[6] = condition;
/* Mask out spurious TF errors due to lazy TF clearing */
- if (condition & DR_STEP) {
+ if (condition & DR_STEP && !debugger_step) {
/*
* The TF error should be masked out only if the current
* process is not traced and if the TRAP flag has been set
@@ -595,11 +600,13 @@
info.si_errno = 0;
info.si_code = TRAP_BRKPT;
- /* If this is a kernel mode trap, save the user PC on entry to
- * the kernel, that's what the debugger can make sense of.
- */
- info.si_addr = ((regs->xcs & 3) == 0) ? (void *)tsk->thread.eip :
- (void *)regs->eip;
+
+ /* If this is a kernel mode trap, we need to reset db7 to allow us
+ * to continue sanely */
+ if ((regs->xcs & 3) == 0)
+ goto clear_dr7;
+
+ info.si_addr = (void *)regs->eip;
force_sig_info(SIGTRAP, &info, tsk);
/* Disable additional traps. They'll be re-enabled when
@@ -609,6 +616,7 @@
__asm__("movl %0,%%db7"
: /* no output */
: "r" (0));
+ CHK_DEBUGGER(1,SIGTRAP,error_code,regs,)
return;
debug_vm86:
--- a/arch/i386/mm/fault.c Wed Feb 11 15:41:51 2004
+++ b/arch/i386/mm/fault.c Wed Feb 11 15:41:51 2004
@@ -2,6 +2,11 @@
* linux/arch/i386/mm/fault.c
*
* Copyright (C) 1995 Linus Torvalds
+ *
+ * Change History
+ *
+ * Tigran Aivazian <tigran@sco.com> Remote debugging support.
+ *
*/
#include <linux/signal.h>
@@ -21,6 +26,7 @@
#include <linux/vt_kern.h> /* For unblank_screen() */
#include <linux/highmem.h>
#include <linux/module.h>
+#include <linux/debugger.h>
#include <asm/system.h>
#include <asm/uaccess.h>
@@ -289,6 +295,12 @@
if (in_atomic() || !mm)
goto bad_area_nosemaphore;
+ if (debugger_memerr_expected) {
+ /* This fault was caused by memory access through a debugger.
+ * Don't handle it like user accesses */
+ goto no_context;
+ }
+
down_read(&mm->mmap_sem);
vma = find_vma(mm, address);
@@ -426,12 +438,15 @@
if (is_prefetch(regs, address))
return;
+ CHK_DEBUGGER(14, SIGSEGV,error_code, regs,)
+
/*
* Oops. The kernel tried to access some bad page. We'll have to
* terminate things with extreme prejudice.
*/
bust_spinlocks(1);
+
if (address < PAGE_SIZE)
printk(KERN_ALERT "Unable to handle kernel NULL pointer dereference");
--- /dev/null Wed Dec 31 16:00:00 1969
+++ b/include/asm-i386/kgdb.h Wed Feb 11 15:41:51 2004
@@ -0,0 +1,53 @@
+#ifndef _ASM_KGDB_H_
+#define _ASM_KGDB_H_
+
+/*
+ * Copyright (C) 2001-2004 Amit S. Kale
+ */
+
+#include <linux/ptrace.h>
+
+/* gdb locks */
+#define KGDB_MAX_NO_CPUS 8
+
+/************************************************************************/
+/* BUFMAX defines the maximum number of characters in inbound/outbound buffers*/
+/* at least NUMREGBYTES*2 are needed for register packets */
+/* Longer buffer is needed to list all threads */
+#define BUFMAX 1024
+
+/* Number of bytes of registers. */
+#define NUMREGBYTES 64
+/*
+ * Note that this register image is in a different order than
+ * the register image that Linux produces at interrupt time.
+ *
+ * Linux's register image is defined by struct pt_regs in ptrace.h.
+ * Just why GDB uses a different order is a historical mystery.
+ */
+enum regnames { _EAX, /* 0 */
+ _ECX, /* 1 */
+ _EDX, /* 2 */
+ _EBX, /* 3 */
+ _ESP, /* 4 */
+ _EBP, /* 5 */
+ _ESI, /* 6 */
+ _EDI, /* 7 */
+ _PC, /* 8 also known as eip */
+ _PS, /* 9 also known as eflags */
+ _CS, /* 10 */
+ _SS, /* 11 */
+ _DS, /* 12 */
+ _ES, /* 13 */
+ _FS, /* 14 */
+ _GS /* 15 */
+};
+
+#define PC_REGNUM _PC /* Program Counter */
+#define SP_REGNUM _ESP /* Stack Pointer */
+#define PTRACE_PC eip /* Program Counter, in ptrace regs. */
+
+#define BREAKPOINT() asm(" int $3");
+#define BREAK_INSTR_SIZE 1
+
+#endif /* _ASM_KGDB_H_ */
--- a/include/asm-i386/processor.h Wed Feb 11 15:41:51 2004
+++ b/include/asm-i386/processor.h Wed Feb 11 15:41:51 2004
@@ -423,6 +423,7 @@
unsigned int saved_fs, saved_gs;
/* IO permissions */
unsigned long *io_bitmap_ptr;
+ void * debuggerinfo;
};
#define INIT_THREAD { \
--
Tom Rini
http://gate.crashing.org/~trini/
^ permalink raw reply [flat|nested] 2+ messages in thread
* [PATCH][4/6] A different KGDB stub
@ 2004-02-17 22:03 Tom Rini
0 siblings, 0 replies; 2+ messages in thread
From: Tom Rini @ 2004-02-17 22:03 UTC (permalink / raw)
To: Andrew Morton, Kernel Mailing List
The following is the i386-specific bits to this KGDB stub.
arch/i386/Kconfig | 2
arch/i386/kernel/Makefile | 1
arch/i386/kernel/entry.S | 39 +++
arch/i386/kernel/i386-stub.c | 442 +++++++++++++++++++++++++++++++++++++++++++
arch/i386/kernel/irq.c | 9
arch/i386/kernel/nmi.c | 14 +
arch/i386/kernel/signal.c | 3
arch/i386/kernel/traps.c | 21 +-
arch/i386/mm/fault.c | 15 +
include/asm-i386/kgdb.h | 53 +++++
include/asm-i386/processor.h | 2
11 files changed, 588 insertions(+), 13 deletions(-)
--- linux-2.6.3-rc4/arch/i386/Kconfig 2004-02-17 09:51:15.000000000 -0700
+++ linux-2.6.3-rc4-kgdb/arch/i386/Kconfig 2004-02-17 11:33:51.330507888 -0700
@@ -1253,6 +1253,8 @@ config DEBUG_SPINLOCK_SLEEP
If you say Y here, various routines which may sleep will become very
noisy if they are called with a spinlock held.
+source "kernel/Kconfig.kgdb"
+
config FRAME_POINTER
bool "Compile the kernel with frame pointers"
help
--- linux-2.6.3-rc4/arch/i386/kernel/Makefile 2004-02-17 09:51:20.000000000 -0700
+++ linux-2.6.3-rc4-kgdb/arch/i386/kernel/Makefile 2004-02-17 11:33:52.086336345 -0700
@@ -31,6 +31,7 @@ obj-y += sysenter.o vsyscall.o
obj-$(CONFIG_ACPI_SRAT) += srat.o
obj-$(CONFIG_HPET_TIMER) += time_hpet.o
obj-$(CONFIG_EFI) += efi.o efi_stub.o
+obj-$(CONFIG_KGDB) += i386-stub.o
EXTRA_AFLAGS := -traditional
--- linux-2.6.3-rc4/arch/i386/kernel/entry.S 2004-02-17 09:51:45.000000000 -0700
+++ linux-2.6.3-rc4-kgdb/arch/i386/kernel/entry.S 2004-02-17 11:33:54.222851443 -0700
@@ -226,7 +226,7 @@ need_resched:
jz restore_all
movl $PREEMPT_ACTIVE,TI_PRE_COUNT(%ebp)
sti
- call schedule
+ call user_schedule
movl $0,TI_PRE_COUNT(%ebp)
cli
jmp need_resched
@@ -308,7 +308,7 @@ work_pending:
testb $_TIF_NEED_RESCHED, %cl
jz work_notifysig
work_resched:
- call schedule
+ call user_schedule
cli # make sure we don't miss an interrupt
# setting need_resched or sigpending
# between sampling and the iret
@@ -399,7 +399,17 @@ vector=vector+1
ALIGN
common_interrupt:
SAVE_ALL
+ movl %esp, %eax
+/* Create a fake function call followed by a fake function prologue to fool
+ * gdb into believing that this is a normal function call. */
+ pushl EIP(%eax)
+
+common_interrupt_1:
+ pushl %ebp
+ movl %esp, %ebp
+ pushl %eax
call do_IRQ
+ addl $12, %esp
jmp ret_from_intr
#define BUILD_INTERRUPT(name, nr) \
@@ -606,6 +616,31 @@ ENTRY(spurious_interrupt_bug)
pushl $do_spurious_interrupt_bug
jmp error_code
+#ifdef CONFIG_KGDB_THREAD
+ENTRY(kern_schedule)
+ pushl %ebp
+ movl %esp, %ebp
+ pushl %ss
+ pushl %ebp
+ pushfl
+ pushl %cs
+ pushl 4(%ebp)
+ pushl %eax
+ pushl %es
+ pushl %ds
+ pushl %eax
+ pushl (%ebp)
+ pushl %edi
+ pushl %esi
+ pushl %edx
+ pushl %ecx
+ pushl %ebx
+ call kern_do_schedule
+ movl %ebp, %esp
+ pop %ebp
+ ret
+#endif
+
.data
ENTRY(sys_call_table)
.long sys_restart_syscall /* 0 - old "setup()" system call, used for restarting */
--- linux-2.6.3-rc4/arch/i386/kernel/i386-stub.c 1969-12-31 17:00:00.000000000 -0700
+++ linux-2.6.3-rc4-kgdb/arch/i386/kernel/i386-stub.c 2004-02-17 11:34:22.040538009 -0700
@@ -0,0 +1,442 @@
+/*
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ */
+
+/*
+ * Copyright (C) 2000-2001 VERITAS Software Corporation.
+ */
+/****************************************************************************
+ * Header: remcom.c,v 1.34 91/03/09 12:29:49 glenne Exp $
+ *
+ * Module name: remcom.c $
+ * Revision: 1.34 $
+ * Date: 91/03/09 12:29:49 $
+ * Contributor: Lake Stevens Instrument Division$
+ *
+ * Description: low level support for gdb debugger. $
+ *
+ * Considerations: only works on target hardware $
+ *
+ * Written by: Glenn Engel $
+ * Updated by: Amit Kale<akale@veritas.com>
+ * ModuleState: Experimental $
+ *
+ * NOTES: See Below $
+ *
+ * Modified for 386 by Jim Kingdon, Cygnus Support.
+ * Origianl kgdb, compatibility with 2.1.xx kernel by David Grothe <dave@gcom.com>
+ * Integrated into 2.2.5 kernel by Tigran Aivazian <tigran@sco.com>
+ * thread support,
+ * support for multiple processors,
+ * support for ia-32(x86) hardware debugging,
+ * Console support,
+ * handling nmi watchdog
+ * Amit S. Kale ( amitkale@emsyssoft.com )
+ *
+ *
+ * To enable debugger support, two things need to happen. One, a
+ * call to set_debug_traps() is necessary in order to allow any breakpoints
+ * or error conditions to be properly intercepted and reported to gdb.
+ * Two, a breakpoint needs to be generated to begin communication. This
+ * is most easily accomplished by a call to breakpoint(). Breakpoint()
+ * simulates a breakpoint by executing an int 3.
+ *
+ *************
+ *
+ * The following gdb commands are supported:
+ *
+ * command function Return value
+ *
+ * g return the value of the CPU registers hex data or ENN
+ * G set the value of the CPU registers OK or ENN
+ *
+ * mAA..AA,LLLL Read LLLL bytes at address AA..AA hex data or ENN
+ * MAA..AA,LLLL: Write LLLL bytes at address AA.AA OK or ENN
+ *
+ * c Resume at current address SNN ( signal NN)
+ * cAA..AA Continue at address AA..AA SNN
+ *
+ * s Step one instruction SNN
+ * sAA..AA Step one instruction from AA..AA SNN
+ *
+ * k kill
+ *
+ * ? What was the last sigval ? SNN (signal NN)
+ *
+ * All commands and responses are sent with a packet which includes a
+ * checksum. A packet consists of
+ *
+ * $<packet info>#<checksum>.
+ *
+ * where
+ * <packet info> :: <characters representing the command or response>
+ * <checksum> :: < two hex digits computed as modulo 256 sum of <packetinfo>>
+ *
+ * When a packet is received, it is first acknowledged with either '+' or '-'.
+ * '+' indicates a successful transfer. '-' indicates a failed transfer.
+ *
+ * Example:
+ *
+ * Host: Reply:
+ * $m0,10#2a +$00010203040506070809101112131415#42
+ *
+ ****************************************************************************/
+
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/smp.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <asm/vm86.h>
+#include <asm/system.h>
+#include <asm/ptrace.h> /* for linux pt_regs struct */
+#include <linux/kgdb.h>
+#ifdef CONFIG_GDB_CONSOLE
+#include <linux/console.h>
+#endif
+#include <linux/init.h>
+#include <linux/debugger.h>
+
+/* Put the error code here just in case the user cares. */
+int gdb_i386errcode;
+/* Likewise, the vector number here (since GDB only gets the signal
+ number through the usual means, and that's not very specific). */
+int gdb_i386vector = -1;
+
+#if KGDB_MAX_NO_CPUS != 8
+#error change the definition of slavecpulocks
+#endif
+
+void regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs)
+{
+ gdb_regs[_EAX] = regs->eax;
+ gdb_regs[_EBX] = regs->ebx;
+ gdb_regs[_ECX] = regs->ecx;
+ gdb_regs[_EDX] = regs->edx;
+ gdb_regs[_ESI] = regs->esi;
+ gdb_regs[_EDI] = regs->edi;
+ gdb_regs[_EBP] = regs->ebp;
+ gdb_regs[ _DS] = regs->xds;
+ gdb_regs[ _ES] = regs->xes;
+ gdb_regs[ _PS] = regs->eflags;
+ gdb_regs[ _CS] = regs->xcs;
+ gdb_regs[ _PC] = regs->eip;
+ gdb_regs[_ESP] = (int) (®s->esp) ;
+ gdb_regs[ _SS] = __KERNEL_DS;
+ gdb_regs[ _FS] = 0xFFFF;
+ gdb_regs[ _GS] = 0xFFFF;
+}
+
+void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p)
+{
+ gdb_regs[_EAX] = 0;
+ gdb_regs[_EBX] = 0;
+ gdb_regs[_ECX] = 0;
+ gdb_regs[_EDX] = 0;
+ gdb_regs[_ESI] = 0;
+ gdb_regs[_EDI] = 0;
+ gdb_regs[_EBP] = *(int *)p->thread.esp;
+ gdb_regs[_DS] = __KERNEL_DS;
+ gdb_regs[_ES] = __KERNEL_DS;
+ gdb_regs[_PS] = 0;
+ gdb_regs[_CS] = __KERNEL_CS;
+ gdb_regs[_PC] = p->thread.eip;
+ gdb_regs[_ESP] = p->thread.esp;
+ gdb_regs[_SS] = __KERNEL_DS;
+ gdb_regs[_FS] = 0xFFFF;
+ gdb_regs[_GS] = 0xFFFF;
+}
+
+void gdb_regs_to_regs(unsigned long *gdb_regs, struct pt_regs *regs)
+{
+ regs->eax = gdb_regs[_EAX] ;
+ regs->ebx = gdb_regs[_EBX] ;
+ regs->ecx = gdb_regs[_ECX] ;
+ regs->edx = gdb_regs[_EDX] ;
+ regs->esi = gdb_regs[_ESI] ;
+ regs->edi = gdb_regs[_EDI] ;
+ regs->ebp = gdb_regs[_EBP] ;
+ regs->xds = gdb_regs[ _DS] ;
+ regs->xes = gdb_regs[ _ES] ;
+ regs->eflags= gdb_regs[ _PS] ;
+ regs->xcs = gdb_regs[ _CS] ;
+ regs->eip = gdb_regs[ _PC] ;
+#if 0 /* can't change these */
+ regs->esp = gdb_regs[_ESP] ;
+ regs->xss = gdb_regs[ _SS] ;
+ regs->fs = gdb_regs[ _FS] ;
+ regs->gs = gdb_regs[ _GS] ;
+#endif
+
+}
+
+struct hw_breakpoint {
+ unsigned enabled;
+ unsigned type;
+ unsigned len;
+ unsigned addr;
+} breakinfo[4] = { {
+enabled:0}, {
+enabled:0}, {
+enabled:0}, {
+enabled:0}};
+
+void kgdb_correct_hw_break(void)
+{
+ int breakno;
+ int correctit;
+ int breakbit;
+ unsigned dr7;
+
+ asm volatile ("movl %%db7, %0\n":"=r" (dr7)
+ :);
+ do {
+ unsigned addr0, addr1, addr2, addr3;
+ asm volatile ("movl %%db0, %0\n"
+ "movl %%db1, %1\n"
+ "movl %%db2, %2\n"
+ "movl %%db3, %3\n":"=r" (addr0), "=r"(addr1),
+ "=r"(addr2), "=r"(addr3):);
+ } while (0);
+ correctit = 0;
+ for (breakno = 0; breakno < 3; breakno++) {
+ breakbit = 2 << (breakno << 1);
+ if (!(dr7 & breakbit) && breakinfo[breakno].enabled) {
+ correctit = 1;
+ dr7 |= breakbit;
+ dr7 &= ~(0xf0000 << (breakno << 2));
+ dr7 |= (((breakinfo[breakno].len << 2) |
+ breakinfo[breakno].type) << 16) <<
+ (breakno << 2);
+ switch (breakno) {
+ case 0:
+ asm volatile ("movl %0, %%dr0\n"::"r"
+ (breakinfo[breakno].addr));
+ break;
+
+ case 1:
+ asm volatile ("movl %0, %%dr1\n"::"r"
+ (breakinfo[breakno].addr));
+ break;
+
+ case 2:
+ asm volatile ("movl %0, %%dr2\n"::"r"
+ (breakinfo[breakno].addr));
+ break;
+
+ case 3:
+ asm volatile ("movl %0, %%dr3\n"::"r"
+ (breakinfo[breakno].addr));
+ break;
+ }
+ } else if ((dr7 & breakbit) && !breakinfo[breakno].enabled) {
+ correctit = 1;
+ dr7 &= ~breakbit;
+ dr7 &= ~(0xf0000 << (breakno << 2));
+ }
+ }
+ if (correctit) {
+ asm volatile ("movl %0, %%db7\n"::"r" (dr7));
+ }
+}
+
+int kgdb_remove_hw_break(unsigned long addr, int type)
+{
+ int i, idx = -1;
+ for (i = 0; i < 4; i ++) {
+ if (breakinfo[i].addr == addr && breakinfo[i].enabled) {
+ idx = i;
+ break;
+ }
+ }
+ if (idx == -1)
+ return -1;
+
+ breakinfo[idx].enabled = 0;
+ return 0;
+}
+
+int kgdb_set_hw_break(unsigned long addr, int type)
+{
+ int i, idx = -1;
+ for (i = 0; i < 4; i ++) {
+ if (!breakinfo[i].enabled) {
+ idx = i;
+ break;
+ }
+ }
+ if (idx == -1)
+ return -1;
+
+ breakinfo[idx].enabled = 1;
+ breakinfo[idx].type = type;
+ breakinfo[idx].len = 1;
+ breakinfo[idx].addr = addr;
+ return 0;
+}
+
+int remove_hw_break(unsigned breakno)
+{
+ if (!breakinfo[breakno].enabled) {
+ return -1;
+ }
+ breakinfo[breakno].enabled = 0;
+ return 0;
+}
+
+int set_hw_break(unsigned breakno,
+ unsigned type, unsigned len, unsigned addr)
+{
+ if (breakinfo[breakno].enabled) {
+ return -1;
+ }
+ breakinfo[breakno].enabled = 1;
+ breakinfo[breakno].type = type;
+ breakinfo[breakno].len = len;
+ breakinfo[breakno].addr = addr;
+ return 0;
+}
+
+void kgdb_printexceptioninfo(int exceptionNo, int errorcode, char *buffer)
+{
+ unsigned dr6;
+ int i;
+ switch (exceptionNo) {
+ case 1: /* debug exception */
+ break;
+ case 3: /* breakpoint */
+ sprintf(buffer, "Software breakpoint");
+ return;
+ default:
+ sprintf(buffer, "Details not available");
+ return;
+ }
+ asm volatile ("movl %%db6, %0\n":"=r" (dr6)
+ :);
+ if (dr6 & 0x4000) {
+ sprintf(buffer, "Single step");
+ return;
+ }
+ for (i = 0; i < 4; ++i) {
+ if (dr6 & (1 << i)) {
+ sprintf(buffer, "Hardware breakpoint %d", i);
+ return;
+ }
+ }
+ sprintf(buffer, "Unknown trap");
+ return;
+}
+
+void kgdb_disable_hw_debug(struct pt_regs *regs)
+{
+ /* Disable hardware debugging while we are in kgdb */
+ asm volatile("movl %0,%%db7": /* no output */ : "r"(0));
+}
+
+void kgdb_post_master_code(struct pt_regs *regs, int eVector, int err_code)
+{
+ /* Master processor is completely in the debugger */
+ gdb_i386vector = eVector;
+ gdb_i386errcode = err_code;
+}
+
+int kgdb_arch_handle_exception(int exceptionVector, int signo,
+ int err_code, char *remcomInBuffer, char *remcomOutBuffer,
+ struct pt_regs *linux_regs)
+{
+ long addr, length;
+ long breakno, breaktype;
+ char *ptr;
+ int newPC;
+ int dr6;
+
+ switch (remcomInBuffer[0]) {
+ case 'c':
+ case 's':
+ if (kgdb_contthread && kgdb_contthread != current) {
+ strcpy(remcomOutBuffer, "E00");
+ break;
+ }
+
+ kgdb_contthread = NULL;
+
+ /* try to read optional parameter, pc unchanged if no parm */
+ ptr = &remcomInBuffer[1];
+ if (kgdb_hex2long(&ptr, &addr)) {
+ linux_regs->eip = addr;
+ }
+ newPC = linux_regs->eip;
+
+ /* clear the trace bit */
+ linux_regs->eflags &= 0xfffffeff;
+
+ /* set the trace bit if we're stepping */
+ if (remcomInBuffer[0] == 's') {
+ linux_regs->eflags |= 0x100;
+ debugger_step = 1;
+ }
+
+ asm volatile ("movl %%db6, %0\n" : "=r" (dr6));
+ if (!(dr6 & 0x4000)) {
+ for (breakno = 0; breakno < 4; ++breakno) {
+ if (dr6 & (1 << breakno)) {
+ if (breakinfo[breakno].type == 0) {
+ /* Set restore flag */
+ linux_regs->eflags |= 0x10000;
+ break;
+ }
+ }
+ }
+ }
+ kgdb_correct_hw_break();
+ asm volatile ("movl %0, %%db6\n"::"r" (0));
+
+ return (0);
+
+ case 'Y':
+ ptr = &remcomInBuffer[1];
+ kgdb_hex2long(&ptr, &breakno);
+ ptr++;
+ kgdb_hex2long(&ptr, &breaktype);
+ ptr++;
+ kgdb_hex2long(&ptr, &length);
+ ptr++;
+ kgdb_hex2long(&ptr, &addr);
+ if (set_hw_break(breakno & 0x3, breaktype & 0x3,
+ length & 0x3, addr) == 0) {
+ strcpy(remcomOutBuffer, "OK");
+ } else {
+ strcpy(remcomOutBuffer, "ERROR");
+ }
+ break;
+
+ /* Remove hardware breakpoint */
+ case 'y':
+ ptr = &remcomInBuffer[1];
+ kgdb_hex2long(&ptr, &breakno);
+ if (remove_hw_break(breakno & 0x3) == 0) {
+ strcpy(remcomOutBuffer, "OK");
+ } else {
+ strcpy(remcomOutBuffer, "ERROR");
+ }
+ break;
+
+ } /* switch */
+ return -1; /* this means that we do not want to exit from the handler */
+}
+
+struct kgdb_arch arch_kgdb_ops = {
+ .gdb_bpt_instr = {0xcc},
+ .flags = KGDB_HW_BREAKPOINT,
+};
--- linux-2.6.3-rc4/arch/i386/kernel/irq.c 2004-02-17 09:50:55.000000000 -0700
+++ linux-2.6.3-rc4-kgdb/arch/i386/kernel/irq.c 2004-02-17 11:33:48.826076293 -0700
@@ -34,6 +34,7 @@
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
#include <linux/kallsyms.h>
+#include <linux/kgdb.h>
#include <asm/atomic.h>
#include <asm/io.h>
@@ -410,7 +411,7 @@ void enable_irq(unsigned int irq)
* SMP cross-CPU interrupts have their own specific
* handlers).
*/
-asmlinkage unsigned int do_IRQ(struct pt_regs regs)
+asmlinkage unsigned int do_IRQ(struct pt_regs *regs)
{
/*
* We ack quickly, we don't want the irq controller
@@ -422,7 +423,7 @@ asmlinkage unsigned int do_IRQ(struct pt
* 0 return value means that this irq is already being
* handled by some other CPU. (or is disabled)
*/
- int irq = regs.orig_eax & 0xff; /* high bits used in ret_from_ code */
+ int irq = regs->orig_eax & 0xff; /* high bits used in ret_from_ code */
irq_desc_t *desc = irq_desc + irq;
struct irqaction * action;
unsigned int status;
@@ -488,7 +489,7 @@ asmlinkage unsigned int do_IRQ(struct pt
irqreturn_t action_ret;
spin_unlock(&desc->lock);
- action_ret = handle_IRQ_event(irq, ®s, action);
+ action_ret = handle_IRQ_event(irq, regs, action);
spin_lock(&desc->lock);
if (!noirqdebug)
note_interrupt(irq, desc, action_ret);
@@ -508,6 +509,8 @@ out:
irq_exit();
+ kgdb_process_breakpoint();
+
return 1;
}
--- linux-2.6.3-rc4/arch/i386/kernel/nmi.c 2004-02-17 09:52:45.000000000 -0700
+++ linux-2.6.3-rc4-kgdb/arch/i386/kernel/nmi.c 2004-02-17 11:34:03.514742567 -0700
@@ -25,6 +25,7 @@
#include <linux/module.h>
#include <linux/nmi.h>
#include <linux/sysdev.h>
+#include <linux/debugger.h>
#include <asm/smp.h>
#include <asm/mtrr.h>
@@ -420,14 +421,25 @@ void nmi_watchdog_tick (struct pt_regs *
int sum, cpu = smp_processor_id();
sum = irq_stat[cpu].apic_timer_irqs;
+ if (atomic_read(&debugger_active)) {
- if (last_irq_sums[cpu] == sum) {
+ /*
+ * The machine is in debugger, hold this cpu if already
+ * not held.
+ */
+ debugger_nmihook(cpu, regs);
+ alert_counter[cpu] = 0;
+
+ } else if (last_irq_sums[cpu] == sum) {
/*
* Ayiee, looks like this CPU is stuck ...
* wait a few IRQs (5 seconds) before doing the oops ...
*/
alert_counter[cpu]++;
if (alert_counter[cpu] == 5*nmi_hz) {
+
+ CHK_DEBUGGER(2,SIGSEGV,0,regs,)
+
spin_lock(&nmi_print_lock);
/*
* We are in trouble anyway, lets at least try
--- linux-2.6.3-rc4/arch/i386/kernel/signal.c 2004-02-17 09:52:25.000000000 -0700
+++ linux-2.6.3-rc4-kgdb/arch/i386/kernel/signal.c 2004-02-17 11:34:00.327465946 -0700
@@ -580,7 +580,8 @@ int do_signal(struct pt_regs *regs, sigs
* have been cleared if the watchpoint triggered
* inside the kernel.
*/
- __asm__("movl %0,%%db7" : : "r" (current->thread.debugreg[7]));
+ if (current->thread.debugreg[7])
+ __asm__("movl %0,%%db7" : : "r" (current->thread.debugreg[7]));
/* Whee! Actually deliver the signal. */
handle_signal(signr, &info, oldset, regs);
--- linux-2.6.3-rc4/arch/i386/kernel/traps.c 2004-02-17 09:51:19.000000000 -0700
+++ linux-2.6.3-rc4-kgdb/arch/i386/kernel/traps.c 2004-02-17 11:33:51.862387173 -0700
@@ -51,6 +51,7 @@
#include <linux/irq.h>
#include <linux/module.h>
+#include <linux/debugger.h>
#include "mach_traps.h"
@@ -256,6 +257,7 @@ void die(const char * str, struct pt_reg
{
static int die_counter;
+ CHK_DEBUGGER(1,SIGTRAP,err,regs,)
console_verbose();
spin_lock_irq(&die_lock);
bust_spinlocks(1);
@@ -330,6 +332,7 @@ static inline void do_trap(int trapnr, i
#define DO_ERROR(trapnr, signr, str, name) \
asmlinkage void do_##name(struct pt_regs * regs, long error_code) \
{ \
+ CHK_DEBUGGER(trapnr,signr,error_code,regs,)\
do_trap(trapnr, signr, str, 0, regs, error_code, NULL); \
}
@@ -347,7 +350,10 @@ asmlinkage void do_##name(struct pt_regs
#define DO_VM86_ERROR(trapnr, signr, str, name) \
asmlinkage void do_##name(struct pt_regs * regs, long error_code) \
{ \
+ CHK_DEBUGGER(trapnr,signr,error_code,regs,goto skip_trap)\
do_trap(trapnr, signr, str, 1, regs, error_code, NULL); \
+skip_trap: \
+ return; \
}
#define DO_VM86_ERROR_INFO(trapnr, signr, str, name, sicode, siaddr) \
@@ -547,7 +553,7 @@ asmlinkage void do_debug(struct pt_regs
tsk->thread.debugreg[6] = condition;
/* Mask out spurious TF errors due to lazy TF clearing */
- if (condition & DR_STEP) {
+ if (condition & DR_STEP && !debugger_step) {
/*
* The TF error should be masked out only if the current
* process is not traced and if the TRAP flag has been set
@@ -570,11 +576,13 @@ asmlinkage void do_debug(struct pt_regs
info.si_errno = 0;
info.si_code = TRAP_BRKPT;
- /* If this is a kernel mode trap, save the user PC on entry to
- * the kernel, that's what the debugger can make sense of.
- */
- info.si_addr = ((regs->xcs & 3) == 0) ? (void *)tsk->thread.eip :
- (void *)regs->eip;
+
+ /* If this is a kernel mode trap, we need to reset db7 to allow us
+ * to continue sanely */
+ if ((regs->xcs & 3) == 0)
+ goto clear_dr7;
+
+ info.si_addr = (void *)regs->eip;
force_sig_info(SIGTRAP, &info, tsk);
/* Disable additional traps. They'll be re-enabled when
@@ -584,6 +592,7 @@ clear_dr7:
__asm__("movl %0,%%db7"
: /* no output */
: "r" (0));
+ CHK_DEBUGGER(1,SIGTRAP,error_code,regs,)
return;
debug_vm86:
--- linux-2.6.3-rc4/arch/i386/mm/fault.c 2004-02-17 09:49:23.000000000 -0700
+++ linux-2.6.3-rc4-kgdb/arch/i386/mm/fault.c 2004-02-17 11:33:45.541821689 -0700
@@ -2,6 +2,11 @@
* linux/arch/i386/mm/fault.c
*
* Copyright (C) 1995 Linus Torvalds
+ *
+ * Change History
+ *
+ * Tigran Aivazian <tigran@sco.com> Remote debugging support.
+ *
*/
#include <linux/signal.h>
@@ -21,6 +26,7 @@
#include <linux/vt_kern.h> /* For unblank_screen() */
#include <linux/highmem.h>
#include <linux/module.h>
+#include <linux/debugger.h>
#include <asm/system.h>
#include <asm/uaccess.h>
@@ -262,6 +268,12 @@ asmlinkage void do_page_fault(struct pt_
if (in_atomic() || !mm)
goto bad_area_nosemaphore;
+ if (debugger_memerr_expected) {
+ /* This fault was caused by memory access through a debugger.
+ * Don't handle it like user accesses */
+ goto no_context;
+ }
+
down_read(&mm->mmap_sem);
vma = find_vma(mm, address);
@@ -399,6 +411,8 @@ no_context:
if (is_prefetch(regs, address))
return;
+ CHK_DEBUGGER(14, SIGSEGV,error_code, regs,)
+
/*
* Oops. The kernel tried to access some bad page. We'll have to
* terminate things with extreme prejudice.
@@ -406,6 +420,7 @@ no_context:
bust_spinlocks(1);
+
if (address < PAGE_SIZE)
printk(KERN_ALERT "Unable to handle kernel NULL pointer dereference");
else
--- linux-2.6.3-rc4/include/asm-i386/kgdb.h 1969-12-31 17:00:00.000000000 -0700
+++ linux-2.6.3-rc4-kgdb/include/asm-i386/kgdb.h 2004-02-17 11:34:26.198594316 -0700
@@ -0,0 +1,53 @@
+#ifndef _ASM_KGDB_H_
+#define _ASM_KGDB_H_
+
+/*
+ * Copyright (C) 2001-2004 Amit S. Kale
+ */
+
+#include <linux/ptrace.h>
+
+/* gdb locks */
+#define KGDB_MAX_NO_CPUS 8
+
+/************************************************************************/
+/* BUFMAX defines the maximum number of characters in inbound/outbound buffers*/
+/* at least NUMREGBYTES*2 are needed for register packets */
+/* Longer buffer is needed to list all threads */
+#define BUFMAX 1024
+
+/* Number of bytes of registers. */
+#define NUMREGBYTES 64
+/*
+ * Note that this register image is in a different order than
+ * the register image that Linux produces at interrupt time.
+ *
+ * Linux's register image is defined by struct pt_regs in ptrace.h.
+ * Just why GDB uses a different order is a historical mystery.
+ */
+enum regnames { _EAX, /* 0 */
+ _ECX, /* 1 */
+ _EDX, /* 2 */
+ _EBX, /* 3 */
+ _ESP, /* 4 */
+ _EBP, /* 5 */
+ _ESI, /* 6 */
+ _EDI, /* 7 */
+ _PC, /* 8 also known as eip */
+ _PS, /* 9 also known as eflags */
+ _CS, /* 10 */
+ _SS, /* 11 */
+ _DS, /* 12 */
+ _ES, /* 13 */
+ _FS, /* 14 */
+ _GS /* 15 */
+};
+
+#define PC_REGNUM _PC /* Program Counter */
+#define SP_REGNUM _ESP /* Stack Pointer */
+#define PTRACE_PC eip /* Program Counter, in ptrace regs. */
+
+#define BREAKPOINT() asm(" int $3");
+#define BREAK_INSTR_SIZE 1
+
+#endif /* _ASM_KGDB_H_ */
--- linux-2.6.3-rc4/include/asm-i386/processor.h 2004-02-17 09:50:44.000000000 -0700
+++ linux-2.6.3-rc4-kgdb/include/asm-i386/processor.h 2004-02-17 11:33:48.213215388 -0700
@@ -425,6 +426,8 @@ struct thread_struct {
unsigned int saved_fs, saved_gs;
/* IO permissions */
unsigned long *io_bitmap_ptr;
+ void * debuggerinfo;
+
};
#define INIT_THREAD { \
--
Tom Rini
http://gate.crashing.org/~trini/
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2004-02-17 22:18 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2004-02-12 0:03 [PATCH][4/6] A different KGDB stub Tom Rini
2004-02-17 22:03 Tom Rini
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®