* SiS 964 serial ata on Asus P4S800D problems
@ 2004-04-03 14:16 Elisabetta Galli
0 siblings, 0 replies; only message in thread
From: Elisabetta Galli @ 2004-04-03 14:16 UTC (permalink / raw)
To: linux-kernel
Hi all!
I'm trying to set up a raid array using two Maxtor DMaxPlus 6Y080M0
Sata, kernel 2.4.25 with libata 2.4.25-16 including support for Sis 964
chipset by Uwe Koziolek / Jeff Garzik.
Although Bios recognizes the disks during the post, the kernel doesn't
see them and gives out this message:
SCSI subsystem driver Revision: 1.00
libata version 1.02 loaded.
PCI: Found IRQ 10 for device 00:05.0
ata1: SATA max UDMA/133 cmd 0xEFF0 ctl 0xEFE6 bmdma 0xEF90 irq 10
ata2: SATA max UDMA/133 cmd 0xEFA8 ctl 0xEFE2 bmdma 0xEF98 irq 10
ata1: no device found (phy stat 5dfdfffe)
ata1: thread exiting
i8253 count too high! resetting..
ata2: no device found (phy stat 0094108a)
ata2: thread exiting
scsi0 : sata_sis
scsi1 : sata_sis
i8253 count too high! resetting..
Could it be a problem with the libata patch? Any suggestions?
Thank you.
Elisa
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2004-04-03 14:10 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2004-04-03 14:16 SiS 964 serial ata on Asus P4S800D problems Elisabetta Galli
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®