From: Harry <postituk@yahoo.com>
To: linux-kernel@vger.kernel.org
Subject: PROBLEM:
Date: Sat, 24 Apr 2004 11:55:25 -0700 (PDT) [thread overview]
Message-ID: <20040424185525.52521.qmail@web50406.mail.yahoo.com> (raw)
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset=us-ascii, Size: 20032 bytes --]
I have not submitted a bug report before so I hope this is enough
information. If any more is required please let me know.
[1] Getting Oops's during heavy filesystem access
[2] I initially thought this was a hardware problem because I was
trying to use the SATA on a MSI K8T Neo motherboard. I switched to
using normal IDE disks and got another Oops using the 2.6.5 kernel. I
reverted back to the old binary 2.2.20 kernel and tried to reproduce
the problem but was unable to.
[3] IDE SATA
[4.] kernel 2.6.5
[5.] I have had three seperate Oops all of which look completely
different, at least to me. I have only included the first Oops from
each occurence.
Unable to handle kernel paging request at virtual address 00ff0744
printing eip:
c01e5351
*pde = 00000000
Oops: 0000 [#1]
CPU: 0
0060:[generic_make_request+17/384] Not tainted
EFLAGS: 00010282 (2.6.5)
EIP is at generic_make_request+0x11/0x180
eax: 00000202 ebx: 007d8008 ecx: 00ff0740 edx: e8eea300
esi: fb001000 edi: e8eea300 ebp: 00000040 esp: f3ee5d70
ds: 007b es: 007b ss: 0068
Process kjournald (pid: 868, threadinfo=f3ee4000 task=f572b2a0)
Stack: f3ee5d70 f3ee5d70 f3ee5da4 00000082 f1b9f8c0 e8eea300 00000000
00000000
00000010 c01495ab f7fed8a0 00000010 00000000 e908fbd0 00000001
007d8008
00000013 00000001 00000040 c01e54fd e8eea300 e908fbd0 c0148fb0
00000001
Call Trace:
[bio_alloc+203/416] bio_alloc+0xcb/0x1a0
[submit_bio+61/112] submit_bio+0x3d/0x70
[ll_rw_block+96/128] ll_rw_block+0x60/0x80
[journal_commit_transaction+3533/4048]
journal_commit_transaction+0xdcd/0xfd0
[autoremove_wake_function+0/80] autoremove_wake_function+0x0/0x50
[autoremove_wake_function+0/80] autoremove_wake_function+0x0/0x50
[kjournald+180/464] kjournald+0xb4/0x1d0
[autoremove_wake_function+0/80] autoremove_wake_function+0x0/0x50
[autoremove_wake_function+0/80] autoremove_wake_function+0x0/0x50
[ret_from_fork+6/20] ret_from_fork+0x6/0x14
[commit_timeout+0/16] commit_timeout+0x0/0x10
[kjournald+0/464] kjournald+0x0/0x1d0
[kernel_thread_helper+5/20] kernel_thread_helper+0x5/0x14
Code: 8b 41 04 c1 ee 09 8b 50 38 8b 40 34 0f ac d0 09 85 c0 89 c3
Unable to handle kernel paging request at virtual address 00650d50
printing eip:
c0161fb4
*pde = 00000000
Oops: 0000 [#1]
CPU: 0
EIP: 0060:[mpage_writepage+116/1344] Not tainted
EFLAGS: 00010246 (2.6.5)
EIP is at mpage_writepage+0x74/0x540
eax: 2000102d ebx: 00000000 ecx: 0000000c edx: 00650d50
esi: c10a9998 edi: 00650d50 ebp: f753e180 esp: c1ba9d10
ds: 007b es: 007b ss: 0068
Process pdflush (pid: 6, threadinfo=c1ba8000 task=c1bab700)
Stack: eaf57800 c10a99c0 00001000 00000000 00000000 00000000 00000000
00000000
00000000 00000001 ec79e6c0 00000001 0000000c f753e20c ec79e6c0
4c5a0d66
0000e2c2 99f3269a 00000071 c1ba9d8c 00000082 00000001 c0112c3d
00000000
Call Trace:
[scheduler_tick+109/1296] scheduler_tick+0x6d/0x510
[schedule+740/1280] schedule+0x2e4/0x500
[mpage_writepages+596/704] mpage_writepages+0x254/0x2c0
[ext2_get_block+0/880] ext2_get_block+0x0/0x370
[ext2_writepages+31/48] ext2_writepages+0x1f/0x30
[ext2_get_block+0/880] ext2_get_block+0x0/0x370
[do_writepages+30/64] do_writepages+0x1e/0x40
[__sync_single_inode+169/480] __sync_single_inode+0xa9/0x1e0
[sync_sb_inodes+331/496] sync_sb_inodes+0x14b/0x1f0
[writeback_inodes+51/80] writeback_inodes+0x33/0x50
[background_writeout+123/192] background_writeout+0x7b/0xc0
[pdflush+0/48] pdflush+0x0/0x30
[__pdflush+159/336] __pdflush+0x9f/0x150
[pdflush+40/48] pdflush+0x28/0x30
[background_writeout+0/192] background_writeout+0x0/0xc0
[pdflush+0/48] pdflush+0x0/0x30
[kthread+165/176] kthread+0xa5/0xb0
[kthread+0/176] kthread+0x0/0xb0
[kernel_thread_helper+5/20] kernel_thread_helper+0x5/0x14
Code: 8b 02 a8 04 0f 85 f2 02 00 00 8b 02 a8 10 0f 85 8c 02 00 00
Unable to handle kernel paging request at virtual address 000e1b58
printing eip:
c0133e61
*pde = 00000000
Oops: 0002 [#1]
CPU: 0
EIP: 0060:[activate_page+49/128] Not tainted
EFLAGS: 00010046 (2.6.5)
EIP is at activate_page+0x31/0x80
eax: c17f7a50 ebx: c10ebe60 ecx: c10ebe78 edx: 000e1b58
esi: c0300fd8 edi: c10ebe60 ebp: d1883ae0 esp: d588fd68
ds: 007b es: 007b ss: 0068
Process postmaster (pid: 823, threadinfo=d588e000 task=df3cacc0)
Stack: c10ebe60 00001000 c0133ed8 00000000 c012df8b d93a70c0 c10ebe60
00000000
00001000 d588fdf4 00000001 00000001 00000337 c62a5c40 c014a1fd
c1b49600
00000000 00000001 00001000 00000000 d588fdf4 00000000 d1883a54
40a10d00
Call Trace:
[mark_page_accessed+40/48] mark_page_accessed+0x28/0x30
[generic_file_aio_write_nolock+1099/2672]
generic_file_aio_write_nolock+0x44b/0xa70
[bio_hw_segments+45/48] bio_hw_segments+0x2d/0x30
[scheduler_tick+31/1296] scheduler_tick+0x1f/0x510
[buffered_rmqueue+191/352] buffered_rmqueue+0xbf/0x160
[update_process_times+70/96] update_process_times+0x46/0x60
[update_wall_time+11/64] update_wall_time+0xb/0x40
[do_timer+223/240] do_timer+0xdf/0xf0
[generic_file_aio_write+119/160] generic_file_aio_write+0x77/0xa0
[ext3_file_write+68/192] ext3_file_write+0x44/0xc0
[do_sync_write+139/192] do_sync_write+0x8b/0xc0
[permission+70/80] permission+0x46/0x50
[permission+70/80] permission+0x46/0x50
[get_empty_filp+104/224] get_empty_filp+0x68/0xe0
[update_process_times+70/96] update_process_times+0x46/0x60
[dentry_open+282/432] dentry_open+0x11a/0x1b0
[filp_open+98/112] filp_open+0x62/0x70
[do_sync_write+0/192] do_sync_write+0x0/0xc0
[vfs_write+184/304] vfs_write+0xb8/0x130
[sys_write+66/112] sys_write+0x42/0x70
[syscall_call+7/11] syscall_call+0x7/0xb
Code: 89 02 c7 41 04 00 02 20 00 c7 43 18 00 01 10 00 ff 4e 2c 0f
[6] I found the problem while restoring a database
cat database.gz | gunzip | psql dbname
where database.gz is a 600Mb file
[7] Debian sarge ( mild and sunny ;-)
[7.1]
debian:~# /usr/src/kernel-source-2.6.5/scripts/ver_linux
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
Linux debian 2.6.5 #1 Sun Apr 25 19:53:20 BST 2004 i686 GNU/Linux
Gnu C 3.3.3
Gnu make 3.80
binutils 2.14.90.0.7
util-linux 2.12
mount 2.12
module-init-tools 3.0-pre10
e2fsprogs 1.35
pcmcia-cs 3.2.5
PPP 2.4.2
Linux C Library 2.3.2
Dynamic linker (ldd) 2.3.2
Procps 3.2.0
Net-tools 1.60
Console-tools 0.2.3
Sh-utils 5.0.91
Modules Loaded tulip crc32 af_packet
[7.2.]
debian:~# cat /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 15
model : 4
model name : AMD Athlon(tm) 64 Processor 3200+
stepping : 8
cpu MHz : 2001.027
cache size : 1024 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall mmxext lm 3dnowext
3dnow
bogomips : 3940.35
[7.3.]
debian:~# cat /proc/modules
tulip 36640 0 - Live 0xf88bd000
crc32 3840 1 tulip, Live 0xf88a8000
af_packet 12552 2 - Live 0xf88aa000
[7.4.]
debian:~# cat /proc/ioports
0000-001f : dma1
0020-0021 : pic1
0040-005f : timer
0060-006f : keyboard
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
0376-0376 : ide1
03c0-03df : vga+
03f6-03f6 : ide0
0cf8-0cff : PCI conf1
bc00-bcff : 0000:00:11.5
c000-c0ff : 0000:00:0f.0
c400-c40f : 0000:00:0f.0
c400-c407 : ide2
c408-c40f : ide3
c800-c803 : 0000:00:0f.0
c802-c802 : ide3
cc00-cc07 : 0000:00:0f.0
cc00-cc07 : ide3
d000-d003 : 0000:00:0f.0
d400-d407 : 0000:00:0f.0
d800-d87f : 0000:00:0e.0
dc00-dcff : 0000:00:0b.0
e000-e0ff : 0000:00:07.0
e000-e0ff : tulip
e400-e47f : 0000:00:0d.0
e400-e47f : sata_promise
e800-e80f : 0000:00:0d.0
e800-e80f : sata_promise
ec00-ec3f : 0000:00:0d.0
ec00-ec3f : sata_promise
fc00-fc0f : 0000:00:0f.1
fc00-fc07 : ide0
fc08-fc0f : ide1
debian:~# cat /proc/iomem
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000cc800-000cd7ff : Extension ROM
000e0000-000effff : Extension ROM
000f0000-000fffff : System ROM
00100000-3ffeffff : System RAM
00100000-002b24f6 : Kernel code
002b24f7-0033d13f : Kernel data
3fff0000-3fff7fff : ACPI Tables
3fff8000-3fffffff : ACPI Non-volatile Storage
bdc00000-cdbfffff : PCI Bus #01
c0000000-c7ffffff : 0000:01:00.0
cdd00000-cfdfffff : PCI Bus #01
ce000000-ceffffff : 0000:01:00.0
cff60000-cff7ffff : 0000:00:0d.0
cff60000-cff7ffff : sata_promise
cfffe000-cfffefff : 0000:00:0d.0
cfffe000-cfffefff : sata_promise
cffff000-cffff7ff : 0000:00:0e.0
cffffe00-cffffeff : 0000:00:0b.0
cfffff00-cfffffff : 0000:00:07.0
cfffff00-cfffffff : tulip
d0000000-d1ffffff : 0000:00:00.0
fec00000-fec00fff : reserved
fee00000-fee00fff : reserved
fff80000-ffffffff : reserved
[7.5.]
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8385 [K8T800 AGP]
Host Bridge (rev 01)
Subsystem: VIA Technologies, Inc. VT8385 [K8T800 AGP] Host Bridge
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 8
Region 0: Memory at d0000000 (32-bit, prefetchable)
Capabilities: [80] AGP version 3.0
Status: RQ=32 Iso- ArqSz=0 Cal=2 SBA+ ITACoh- GART64- HTrans-
64bit- FW+ AGP3- Rate=x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW-
Rate=<none>
Capabilities: [c0] #08 [0060]
Capabilities: [68] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] #08 [8001]
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI bridge
[K8T800 South] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: cdd00000-cfdfffff
Prefetchable memory behind bridge: bdc00000-cdbfffff
BridgeCtl: Parity- SERR+ NoISA+ VGA+ MAbort- >Reset- FastB2B-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:07.0 Ethernet controller: Lite-On Communications Inc LNE100TX
(rev 20)
Subsystem: Netgear FA310TX
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at e000 [size=cff80000]
Region 1: Memory at cfffff00 (32-bit, non-prefetchable) [size=256]
Expansion ROM at 00040000 [disabled]
0000:00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8169 (rev 10)
Subsystem: Micro-Star International Co., Ltd.: Unknown device 702c
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (8000ns min, 16000ns max), Cache Line Size: 0x08 (32
bytes)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at dc00 [size=cffc0000]
Region 1: Memory at cffffe00 (32-bit, non-prefetchable) [size=256]
Expansion ROM at 00020000 [disabled]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:0d.0 RAID bus controller: Promise Technology, Inc.: Unknown
device 3373 (rev 02)
Subsystem: Micro-Star International Co., Ltd.: Unknown device 702e
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 96 (1000ns min, 4500ns max), Cache Line Size: 0x91 (580
bytes)
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at ec00
Region 1: I/O ports at e800 [size=16]
Region 2: I/O ports at e400 [size=128]
Region 3: Memory at cfffe000 (32-bit, non-prefetchable) [size=4K]
Region 4: Memory at cff60000 (32-bit, non-prefetchable) [size=128K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:0e.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394
Host Controller (rev 80) (prog-if 10 [OHCI])
Subsystem: Micro-Star International Co., Ltd.: Unknown device 702d
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (8000ns max), Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 3
Region 0: Memory at cffff000 (32-bit, non-prefetchable)
Region 1: I/O ports at d800 [size=128]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA
PME(D0-,D1-,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:0f.0 RAID bus controller: VIA Technologies, Inc.: Unknown
device 3149 (rev 80)
Subsystem: Micro-Star International Co., Ltd.: Unknown device 7020
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin B routed to IRQ 10
Region 0: I/O ports at d400
Region 1: I/O ports at d000 [size=4]
Region 2: I/O ports at cc00 [size=8]
Region 3: I/O ports at c800 [size=4]
Region 4: I/O ports at c400 [size=16]
Region 5: I/O ports at c000 [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:0f.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C/VT8235 PIPC Bus Master IDE (rev 06)
(
prog-if 8a [Master SecP PriP])
Subsystem: Micro-Star International Co., Ltd.: Unknown device 7020
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin A routed to IRQ 0
Region 4: I/O ports at fc00 [size=16]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge
[K8T800 South]
Subsystem: VIA Technologies, Inc. VT8237 ISA bridge [K8T800 South]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:11.5 Multimedia audio controller: VIA Technologies, Inc.
VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
Subsystem: Micro-Star International Co., Ltd.: Unknown device 0080
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin C routed to IRQ 5
Region 0: I/O ports at bc00
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Capabilities: [80] #08 [2101]
0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
0000:01:00.0 VGA compatible controller: nVidia Corporation NV11DDR
[GeForce2 MX 100 DDR/200 DDR] (rev b2) (prog-if 00 [VGA])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at ce000000 (32-bit, non-prefetchable)
[size=cfdf0000]
Region 1: Memory at c0000000 (32-bit, prefetchable) [size=128M]
Expansion ROM at 00010000 [disabled]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA- ITACoh- GART64- HTrans-
64bit- FW+ AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW-
Rate=<none>
[7.6.]
debian:~# cat /proc/scsi/scsi
Attached devices:
[X.] Since I am unable to reproduce the problem with the old binary
2.2.20 on normal IDE disks but I can on the same disks when using the
2.6.5 compiled kernel I am making the wild assumption that it is not
hardware related. I tried to find rougly where the problem was using
objdump -d
/mnt/hdc2/usr/src/kernel-source-2.6.4/drivers/block/ll_rw_blk.o
objdump -d /usr/src/linux/fs/bio.o
objdump -d fs/mpage.o
and trying to use the offsets from the oops to see where the problem
was but I was unable to locate the offset in each of the files. This is
probably more my inexperience than anything else. If there is a decent
tutorial on how to do this sort of thing I would appreciate a pointer
or two. So far the only thing I can think of is that my compiler is
dodgy or I am having spurious memory problems.
yours
Harry
__________________________________
Do you Yahoo!?
Yahoo! Photos: High-quality 4x6 digital prints for 25¢
http://photos.yahoo.com/ph/print_splash
next reply other threads:[~2004-04-24 18:55 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-04-24 18:55 Harry [this message]
-- strict thread matches above, loose matches on Subject: below --
2012-12-27 13:36 PROBLEM: Philip Miller
2010-10-05 11:27 PROBLEM: blondquirk
2009-01-19 8:10 PROBLEM: Vincent Chapman
2006-08-31 6:54 PROBLEM: 董董侃
2004-05-22 15:30 PROBLEM: Cybermario
2004-05-16 19:33 PROBLEM: roger@msn
2004-02-19 14:53 PROBLEM: Art Tevs
2004-02-19 15:26 ` PROBLEM: Bartlomiej Zolnierkiewicz
2003-11-23 2:10 Problem: taylordl
2003-11-23 2:54 ` Problem: Matt H.
2003-10-20 0:03 PROBLEM: Teemu Sohlman
2003-06-10 14:15 PROBLEM: BOVARD JAY D
2003-03-03 11:07 PROBLEM: roman duka
2003-03-03 11:38 ` PROBLEM: Russell King
2002-06-12 23:48 PROBLEM: James Drabb
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20040424185525.52521.qmail@web50406.mail.yahoo.com \
--to=postituk@yahoo.com \
--cc=harry@uklug.co.uk \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®