* 2.4.26 agpgart on Tyan K8W 32bit not working?
@ 2004-05-25 19:12 gb
0 siblings, 0 replies; 3+ messages in thread
From: gb @ 2004-05-25 19:12 UTC (permalink / raw)
To: linux-kernel
Howdy,
I'm using the generic 2.4.26 kernel on a Tyan K8W
(dual opteron) with 4GB of memory and an NV18GL
[Quadro4 NVS] graphics card. The K8W BIOS version is
2.02 (1.02 also exhibits the same behavior).
On a 64bit kernel, the following is returned:
[greg@testpig3 greg]$ lspci
00:06.0 PCI bridge: Advanced Micro Devices [AMD]
AMD-8111 PCI (rev 07)
00:07.0 ISA bridge: Advanced Micro Devices [AMD]
AMD-8111 LPC (rev 05)
00:07.1 IDE interface: Advanced Micro Devices [AMD]
AMD-8111 IDE (rev 03)
00:07.2 SMBus: Advanced Micro Devices [AMD] AMD-8111
SMBus 2.0 (rev 02)
00:07.3 Bridge: Advanced Micro Devices [AMD] AMD-8111
ACPI (rev 05)
00:0a.0 PCI bridge: Advanced Micro Devices [AMD]
AMD-8131 PCI-X Bridge (rev 12)
00:0a.1 PIC: Advanced Micro Devices [AMD] AMD-8131
PCI-X APIC (rev 01)
00:0b.0 PCI bridge: Advanced Micro Devices [AMD]
AMD-8131 PCI-X Bridge (rev 12)
00:0b.1 PIC: Advanced Micro Devices [AMD] AMD-8131
PCI-X APIC (rev 01)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8
NorthBridge
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8
NorthBridge
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8
NorthBridge
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8
NorthBridge
00:19.0 Host bridge: Advanced Micro Devices [AMD] K8
NorthBridge
00:19.1 Host bridge: Advanced Micro Devices [AMD] K8
NorthBridge
00:19.2 Host bridge: Advanced Micro Devices [AMD] K8
NorthBridge
00:19.3 Host bridge: Advanced Micro Devices [AMD] K8
NorthBridge
01:06.0 Multimedia audio controller: Creative Labs SB
Audigy (rev 03)
01:06.1 Input device controller: Creative Labs SB
Audigy MIDI/Game port (rev 03)
01:06.2 FireWire (IEEE 1394): Creative Labs SB Audigy
FireWire Port
02:09.0 Ethernet controller: Broadcom Corporation
NetXtreme BCM5703 Gigabit Ethernet (rev 02)
03:00.0 USB Controller: Advanced Micro Devices [AMD]
AMD-8111 USB (rev 0b)
03:00.1 USB Controller: Advanced Micro Devices [AMD]
AMD-8111 USB (rev 0b)
03:0b.0 RAID bus controller: CMD Technology Inc:
Unknown device 3114 (rev 02)
03:0c.0 FireWire (IEEE 1394): Texas Instruments
TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link)
04:00.0 Host bridge: Advanced Micro Devices [AMD]
AMD-8151 System Controller (rev 13)
04:01.0 PCI bridge: Advanced Micro Devices [AMD]
AMD-8151 AGP Bridge (rev 13)
05:00.0 VGA compatible controller: nVidia Corporation
NV18GL [Quadro4 NVS] (rev a2)
05:00.0 VGA compatible controller: nVidia Corporation
NV18GL [Quadro4 NVS] (rev a2)
[greg@testpig3 greg]$ dmesg | grep -i agp
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory:
9968M
agpgart: Detected AMD 8151 chipset
agpgart: AGP aperture is 256M @ 0xe0000000
PCI-DMA: Reserving 128MB of IOMMU area in the AGP
aperture
AGP: Found AGPv3 capable device at 5:0:0
AGP: Found AGPv3 capable device at 4:0:0
AGP: Found AGPv3 capable device at 5:0:0
AGP: Enough AGPv3 devices found, setting up...
On a 32-bit kernel, the following is returned:
[greg@profit linux]$ lspci
00:06.0 PCI bridge: Advanced Micro Devices [AMD]
AMD-8111 PCI (rev 07)
00:07.0 ISA bridge: Advanced Micro Devices [AMD]
AMD-8111 LPC (rev 05)
00:07.1 IDE interface: Advanced Micro Devices [AMD]
AMD-8111 IDE (rev 03)
00:07.2 SMBus: Advanced Micro Devices [AMD] AMD-8111
SMBus 2.0 (rev 02)
00:07.3 Bridge: Advanced Micro Devices [AMD] AMD-8111
ACPI (rev 05)
00:0a.0 PCI bridge: Advanced Micro Devices [AMD]
AMD-8131 PCI-X Bridge (rev 12)
00:0a.1 PIC: Advanced Micro Devices [AMD] AMD-8131
PCI-X APIC (rev 01)
00:0b.0 PCI bridge: Advanced Micro Devices [AMD]
AMD-8131 PCI-X Bridge (rev 12)
00:0b.1 PIC: Advanced Micro Devices [AMD] AMD-8131
PCI-X APIC (rev 01)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8
NorthBridge
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8
NorthBridge
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8
NorthBridge
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8
NorthBridge
00:19.0 Host bridge: Advanced Micro Devices [AMD] K8
NorthBridge
00:19.1 Host bridge: Advanced Micro Devices [AMD] K8
NorthBridge
00:19.2 Host bridge: Advanced Micro Devices [AMD] K8
NorthBridge
00:19.3 Host bridge: Advanced Micro Devices [AMD] K8
NorthBridge
01:06.0 Multimedia audio controller: Creative Labs SB
Audigy (rev 04)
01:06.1 Input device controller: Creative Labs SB
Audigy MIDI/Game port (rev 04)
01:06.2 FireWire (IEEE 1394): Creative Labs SB Audigy
FireWire Port (rev 04)
02:09.0 Ethernet controller: Broadcom Corporation
NetXtreme BCM5703 Gigabit Ethernet (rev 02)
03:00.0 USB Controller: Advanced Micro Devices [AMD]
AMD-8111 USB (rev 0b)
03:00.1 USB Controller: Advanced Micro Devices [AMD]
AMD-8111 USB (rev 0b)
03:0b.0 RAID bus controller: CMD Technology Inc:
Unknown device 3114 (rev 02)
03:0c.0 FireWire (IEEE 1394): Texas Instruments
TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link)
05:00.0 VGA compatible controller: nVidia Corporation
NV18GL [Quadro4 NVS] (rev a2)
[greg@profit linux]$ dmesg | grep -i agp
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory:
3932M
agpgart: no supported devices found.
[drm:drm_init] *ERROR* Cannot initialize the agpgart
module.
0: NVRM: AGPGART: unable to retrieve symbol table
I have tried booting with:
kernel /vmlinuz-2.4.26-bangalore4-01 ro root=/dev/hda2
hdc=ide-scsi apm=power-off agp_try_unsupported=1
=====
How you doin? http://calendar.yahoo.com/bakerg3
__________________________________
Do you Yahoo!?
Friends. Fun. Try the all-new Yahoo! Messenger.
http://messenger.yahoo.com/
^ permalink raw reply [flat|nested] 3+ messages in thread
* 2.4.26 agpgart on Tyan K8W 32bit not working?
@ 2004-05-25 19:21 gb
0 siblings, 0 replies; 3+ messages in thread
From: gb @ 2004-05-25 19:21 UTC (permalink / raw)
To: linux-kernel
...damned yahoo. Please allow me to finish this
email...
> I have tried booting with:
>
> kernel /vmlinuz-2.4.26-bangalore4-01 ro
root=/dev/hda2
> hdc=ide-scsi apm=power-off agp_try_unsupported=1
but get the same results.
So the most obvious difference is that lspci returns
> 04:00.0 Host bridge: Advanced Micro Devices [AMD]
> AMD-8151 System Controller (rev 13)
> 04:01.0 PCI bridge: Advanced Micro Devices [AMD]
> AMD-8151 AGP Bridge (rev 13)
on a 64bit kernel, whereas this is missing on a 32bit
kernel. This may have something to do with the
agpgart messages spit out on the 32bit kernel.
The .config I am using has these two options:
[root@profit root]# grep AGP /usr/src/linux/.config
CONFIG_AGP=y
CONFIG_AGP_INTEL=y
CONFIG_AGP_I810=y
CONFIG_AGP_VIA=y
CONFIG_AGP_AMD=y
CONFIG_AGP_AMD_K8=y
CONFIG_AGP_SIS=y
CONFIG_AGP_ALI=y
# CONFIG_AGP_SWORKS is not set
CONFIG_AGP_NVIDIA=y
# CONFIG_AGP_ATI is not set
So perusing the agpgart_be.c file appears that this
should work on a 32bit kernel. What I am missing?
Please let me know if you have any suggestions or
comments.
Thanks,
--Greg
__________________________________
Do you Yahoo!?
Friends. Fun. Try the all-new Yahoo! Messenger.
http://messenger.yahoo.com/
^ permalink raw reply [flat|nested] 3+ messages in thread
[parent not found: <1ZPD4-17S-7@gated-at.bofh.it>]
* Re: 2.4.26 agpgart on Tyan K8W 32bit not working?
[not found] <1ZPD4-17S-7@gated-at.bofh.it>
@ 2004-05-25 19:38 ` Rainer Koenig
0 siblings, 0 replies; 3+ messages in thread
From: Rainer Koenig @ 2004-05-25 19:38 UTC (permalink / raw)
To: greg; +Cc: linux-kernel
Hi,
gb <bakerg3@yahoo.com> writes:
> I'm using the generic 2.4.26 kernel on a Tyan K8W
> (dual opteron) with 4GB of memory and an NV18GL
> [Quadro4 NVS] graphics card. The K8W BIOS version is
> 2.02 (1.02 also exhibits the same behavior).
Let me limit the output to the interesting part:
> On a 64bit kernel, the following is returned:
>
> [greg@testpig3 greg]$ lspci
> 04:01.0 PCI bridge: Advanced Micro Devices [AMD]
> AMD-8151 AGP Bridge (rev 13)
> 05:00.0 VGA compatible controller: nVidia Corporation
> NV18GL [Quadro4 NVS] (rev a2)
> 05:00.0 VGA compatible controller: nVidia Corporation
> NV18GL [Quadro4 NVS] (rev a2)
>
> On a 32-bit kernel, the following is returned:
>
> [greg@profit linux]$ lspci
> 03:0c.0 FireWire (IEEE 1394): Texas Instruments
> TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link)
> 05:00.0 VGA compatible controller: nVidia Corporation
> NV18GL [Quadro4 NVS] (rev a2)
The AMD-8151 AGP Bridge on bus #4 is missing on the 32-bit kernel.
> [greg@profit linux]$ dmesg | grep -i agp
> Linux agpgart interface v0.99 (c) Jeff Hartmann
> agpgart: Maximum main memory to use for agp memory:
> 3932M
> agpgart: no supported devices found.
> [drm:drm_init] *ERROR* Cannot initialize the agpgart
> module.
> 0: NVRM: AGPGART: unable to retrieve symbol table
Well, I have experienced problems with Red Hat EL 3.0 32 bit where the
old kernel doesn't support the AMD bridge. But on my tests a 2.4.25
kernel did well. So the problem is located elsewhere.
> I have tried booting with:
>
> kernel /vmlinuz-2.4.26-bangalore4-01 ro root=/dev/hda2
> hdc=ide-scsi apm=power-off agp_try_unsupported=1
The question is how your kernel is configuring the PCI devices because
the problem is that the bridge is not listed in the output of lspci.
Try the boot parameter "pci=noacpi" so that PCI is configured the "old"
way without using probably buggy ACPI tables from the BIOS. Anyway, your
problem really looks very strange to me, because usally the kernel that
doesn't see the bridge on bus #4 won't even see the AGP card on bus #5.
Regards,
Rainer
--
Rainer König, Diplom-Informatiker (FH), Augsburg, Germany
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2004-05-25 19:40 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2004-05-25 19:12 2.4.26 agpgart on Tyan K8W 32bit not working? gb
2004-05-25 19:21 gb
[not found] <1ZPD4-17S-7@gated-at.bofh.it>
2004-05-25 19:38 ` Rainer Koenig
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®