* [PATCH] s390: improve memory detection logic.
@ 2004-06-11 17:31 Martin Schwidefsky
0 siblings, 0 replies; only message in thread
From: Martin Schwidefsky @ 2004-06-11 17:31 UTC (permalink / raw)
To: akpm, linux-kernel
[PATCH] s390: improve memory detection logic.
From: Guillaume Morin <guillaume@morinfr.org>
This patch improves the memory detection logic. It detects any
amount of holes in the memory layout up to MEMORY_CHUNK blocks
of available memory.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
diffstat:
arch/s390/kernel/head.S | 126 ++++++++++++++++++++++++++++++++++++++-----
arch/s390/kernel/head64.S | 134 +++++++++++++++++++++++++++++++++++++---------
arch/s390/kernel/setup.c | 4 +
arch/s390/mm/extmem.c | 24 ++++----
include/asm-s390/setup.h | 1
5 files changed, 238 insertions(+), 51 deletions(-)
diff -urN linux-2.6/arch/s390/kernel/head.S linux-2.6-s390/arch/s390/kernel/head.S
--- linux-2.6/arch/s390/kernel/head.S Mon May 10 04:32:26 2004
+++ linux-2.6-s390/arch/s390/kernel/head.S Fri Jun 11 19:09:49 2004
@@ -478,9 +478,80 @@
mvcle %r2,%r4,0 # clear mem
jo .-4 # branch back, if not finish
+ l %r2,.Lrcp-.LPG1(%r13) # Read SCP forced command word
+.Lservicecall:
+ stosm .Lpmask-.LPG1(%r13),0x01 # authorize ext interrupts
+
+ stctl %r0, %r0,.Lcr-.LPG1(%r13) # get cr0
+ la %r1,0x200 # set bit 22
+ o %r1,.Lcr-.LPG1(%r13) # or old cr0 with r1
+ st %r1,.Lcr-.LPG1(%r13)
+ lctl %r0, %r0,.Lcr-.LPG1(%r13) # load modified cr0
+
+ mvc __LC_EXT_NEW_PSW(8),.Lpcext-.LPG1(%r13) # set postcall psw
+ la %r1, .Lsclph-.LPG1(%r13)
+ a %r1,__LC_EXT_NEW_PSW+4 # set handler
+ st %r1,__LC_EXT_NEW_PSW+4
+
+ la %r4,_pstart-.LPG1(%r13) # %r4 is our index for sccb stuff
+ la %r1, .Lsccb-PARMAREA(%r4) # our sccb
+ .insn rre,0xb2200000,%r2,%r1 # service call
+ ipm %r1
+ srl %r1,28 # get cc code
+ xr %r3, %r3
+ chi %r1,3
+ be .Lfchunk-.LPG1(%r13) # leave
+ chi %r1,2
+ be .Lservicecall-.LPG1(%r13)
+ lpsw .Lwaitsclp-.LPG1(%r13)
+.Lsclph:
+ lh %r1,.Lsccbr-PARMAREA(%r4)
+ chi %r1,0x10 # 0x0010 is the sucess code
+ je .Lprocsccb # let's process the sccb
+ chi %r1,0x1f0
+ bne .Lfchunk-.LPG1(%r13) # unhandled error code
+ c %r2, .Lrcp-.LPG1(%r13) # Did we try Read SCP forced
+ bne .Lfchunk-.LPG1(%r13) # if no, give up
+ l %r2, .Lrcp2-.LPG1(%r13) # try with Read SCP
+ b .Lservicecall-.LPG1(%r13)
+.Lprocsccb:
+ lh %r1,.Lscpincr1-PARMAREA(%r4) # use this one if != 0
+ chi %r1,0x00
+ jne .Lscnd
+ l %r1,.Lscpincr2-PARMAREA(%r4) # otherwise use this one
+.Lscnd:
+ xr %r3,%r3 # same logic
+ ic %r3,.Lscpa1-PARMAREA(%r4)
+ chi %r3,0x00
+ jne .Lcompmem
+ l %r3,.Lscpa2-PARMAREA(%r13)
+.Lcompmem:
+ mr %r2,%r1 # mem in MB on 128-bit
+ l %r1,.Lonemb-.LPG1(%r13)
+ mr %r2,%r1 # mem size in bytes in %r3
+ b .Lfchunk-.LPG1(%r13)
+
+.Lpmask:
+ .byte 0
+.align 8
+.Lpcext:.long 0x00080000,0x80000000
+.Lcr:
+ .long 0x00 # place holder for cr0
+.Lwaitsclp:
+ .long 0x020A0000
+ .long .Lsclph
+.Lrcp:
+ .int 0x00120001 # Read SCP forced code
+.Lrcp2:
+ .int 0x00020001 # Read SCP code
+.Lonemb:
+ .int 0x100000
+.Lfchunk:
+
#
# find memory chunks.
#
+ lr %r9,%r3 # end of mem
mvc __LC_PGM_NEW_PSW(8),.Lpcmem-.LPG1(%r13)
la %r1,1 # test in increments of 128KB
sll %r1,17
@@ -488,38 +559,46 @@
slr %r4,%r4 # set start of chunk to zero
slr %r5,%r5 # set end of chunk to zero
slr %r6,%r6 # set access code to zero
+ la %r10, MEMORY_CHUNKS # number of chunks
.Lloop:
tprot 0(%r5),0 # test protection of first byte
ipm %r7
srl %r7,28
clr %r6,%r7 # compare cc with last access code
be .Lsame-.LPG1(%r13)
- clr %r4,%r5 # chunk size > 0?
- be .Lsize0-.LPG1(%r13)
- st %r4,0(%r3) # store start address of chunk
- lr %r0,%r5
- slr %r0,%r4
- st %r0,4(%r3) # store size of chunk
- st %r6,8(%r3) # store type of chunk
- la %r3,12(%r3)
- lr %r4,%r5 # set start to end
-.Lsize0:
- lr %r6,%r7 # set access code to last cc
+ b .Lchkmem-.LPG1(%r13)
.Lsame:
ar %r5,%r1 # add 128KB to end of chunk
bno .Lloop-.LPG1(%r13) # r1 < 0x80000000 -> loop
.Lchkmem: # > 2GB or tprot got a program check
clr %r4,%r5 # chunk size > 0?
- be .Ldonemem-.LPG1(%r13)
+ be .Lchkloop-.LPG1(%r13)
st %r4,0(%r3) # store start address of chunk
lr %r0,%r5
slr %r0,%r4
st %r0,4(%r3) # store size of chunk
st %r6,8(%r3) # store type of chunk
+ la %r3,12(%r3)
+ l %r4,.Lmemsize-.LPG1(%r13) # address of variable memory_size
+ st %r5,0(%r4) # store last end to memory size
+ ahi %r10,-1 # update chunk number
+.Lchkloop:
+ lr %r6,%r7 # set access code to last cc
+ # we got an exception or we're starting a new
+ # chunk , we must check if we should
+ # still try to find valid memory (if we detected
+ # the amount of available storage), and if we
+ # have chunks left
+ xr %r0,%r0
+ clr %r0,%r9 # did we detect memory?
+ je .Ldonemem # if not, leave
+ chi %r10,0 # do we have chunks left?
+ je .Ldonemem
+ alr %r5,%r1 # add 128KB to end of chunk
+ lr %r4,%r5 # potential new chunk
+ clr %r5,%r9 # should we go on?
+ jl .Lloop
.Ldonemem:
- l %r1,.Lmemsize-.LPG1(%r13) # address of variable memory_size
- st %r5,0(%r1) # store last end to memory size
-
l %r12,.Lmflags-.LPG1(%r13) # get address of machine_flags
#
# find out if we are running under VM
@@ -631,6 +710,23 @@
.byte "root=/dev/ram0 ro"
.byte 0
.org 0x11000
+.Lsccb:
+ .hword 0x1000 # length, one page
+ .byte 0x00,0x00,0x00
+ .byte 0x80 # variable response bit set
+.Lsccbr:
+ .hword 0x00 # response code
+.Lscpincr1:
+ .hword 0x00
+.Lscpa1:
+ .byte 0x00
+ .fill 89,1,0
+.Lscpa2:
+ .int 0x00
+.Lscpincr2:
+ .quad 0x00
+ .fill 3984,1,0
+ .org 0x12000
.global _pend
_pend:
diff -urN linux-2.6/arch/s390/kernel/head64.S linux-2.6-s390/arch/s390/kernel/head64.S
--- linux-2.6/arch/s390/kernel/head64.S Mon May 10 04:32:27 2004
+++ linux-2.6-s390/arch/s390/kernel/head64.S Fri Jun 11 19:09:49 2004
@@ -480,12 +480,81 @@
mvcle %r2,%r4,0 # clear mem
jo .-4 # branch back, if not finish
+ l %r2,.Lrcp-.LPG1(%r13) # Read SCP forced command word
+.Lservicecall:
+ stosm .Lpmask-.LPG1(%r13),0x01 # authorize ext interrupts
+
+ stctg %r0,%r0,.Lcr-.LPG1(%r13) # get cr0
+ la %r1,0x200 # set bit 22
+ og %r1,.Lcr-.LPG1(%r13) # or old cr0 with r1
+ stg %r1,.Lcr-.LPG1(%r13)
+ lctlg %r0,%r0,.Lcr-.LPG1(%r13) # load modified cr0
+
+ mvc __LC_EXT_NEW_PSW(8),.Lpcmsk-.LPG1(%r13) # set postcall psw
+ larl %r1,.Lsclph
+ stg %r1,__LC_EXT_NEW_PSW+8 # set handler
+
+ larl %r4,_pstart # %r4 is our index for sccb stuff
+ la %r1,.Lsccb-PARMAREA(%r4) # our sccb
+ .insn rre,0xb2200000,%r2,%r1 # service call
+ ipm %r1
+ srl %r1,28 # get cc code
+ xr %r3,%r3
+ chi %r1,3
+ be .Lfchunk-.LPG1(%r13) # leave
+ chi %r1,2
+ be .Lservicecall-.LPG1(%r13)
+ lpsw .Lwaitsclp-.LPG1(%r13)
+.Lsclph:
+ lh %r1,.Lsccbr-PARMAREA(%r4)
+ chi %r1,0x10 # 0x0010 is the sucess code
+ je .Lprocsccb # let's process the sccb
+ chi %r1,0x1f0
+ bne .Lfchunk-.LPG1(%r13) # unhandled error code
+ c %r2,.Lrcp-.LPG1(%r13) # Did we try Read SCP forced
+ bne .Lfchunk-.LPG1(%r13) # if no, give up
+ l %r2,.Lrcp2-.LPG1(%r13) # try with Read SCP
+ b .Lservicecall-.LPG1(%r13)
+.Lprocsccb:
+ lh %r1,.Lscpincr1-PARMAREA(%r4) # use this one if != 0
+ chi %r1,0x00
+ jne .Lscnd
+ lg %r1,.Lscpincr2-PARMAREA(%r4) # otherwise use this one
+.Lscnd:
+ xr %r3,%r3 # same logic
+ ic %r3,.Lscpa1-PARMAREA(%r4)
+ chi %r3,0x00
+ jne .Lcompmem
+ l %r3,.Lscpa2-PARMAREA(%r13)
+.Lcompmem:
+ mlgr %r2,%r1 # mem in MB on 128-bit
+ l %r1,.Lonemb-.LPG1(%r13)
+ mlgr %r2,%r1 # mem size in bytes in %r3
+ b .Lfchunk-.LPG1(%r13)
+
+.Lpmask:
+ .byte 0
+ .align 8
+.Lcr:
+ .quad 0x00 # place holder for cr0
+.Lwaitsclp:
+ .long 0x020A0000
+ .quad .Lsclph
+.Lrcp:
+ .int 0x00120001 # Read SCP forced code
+.Lrcp2:
+ .int 0x00020001 # Read SCP code
+.Lonemb:
+ .int 0x100000
+
+.Lfchunk:
# set program check new psw mask
mvc __LC_PGM_NEW_PSW(8),.Lpcmsk-.LPG1(%r13)
#
# find memory chunks.
#
+ lgr %r9,%r3 # end of mem
larl %r1,.Lchkmem # set program check address
stg %r1,__LC_PGM_NEW_PSW+8
la %r1,1 # test in increments of 128KB
@@ -494,51 +563,51 @@
slgr %r4,%r4 # set start of chunk to zero
slgr %r5,%r5 # set end of chunk to zero
slr %r6,%r6 # set access code to zero
+ la %r10,MEMORY_CHUNKS # number of chunks
.Lloop:
tprot 0(%r5),0 # test protection of first byte
ipm %r7
srl %r7,28
clr %r6,%r7 # compare cc with last access code
je .Lsame
- clgr %r4,%r5 # chunk size > 0?
- je .Lsize0
- stg %r4,0(%r3) # store start address of chunk
- lgr %r0,%r5
- slgr %r0,%r4
- stg %r0,8(%r3) # store size of chunk
- st %r6,20(%r3) # store type of chunk
- la %r3,24(%r3)
- lgr %r4,%r5 # set start to end
- larl %r8,memory_size
- stg %r5,0(%r8) # store memory size
-.Lsize0:
- lr %r6,%r7 # set access code to last cc
+ j .Lchkmem
.Lsame:
algr %r5,%r1 # add 128KB to end of chunk
- brc 12,.Lloop
+ # no need to check here,
+ brc 12,.Lloop # this is the same chunk
.Lchkmem: # > 16EB or tprot got a program check
clgr %r4,%r5 # chunk size > 0?
- je .Ldonemem
+ je .Lchkloop
stg %r4,0(%r3) # store start address of chunk
lgr %r0,%r5
slgr %r0,%r4
stg %r0,8(%r3) # store size of chunk
st %r6,20(%r3) # store type of chunk
la %r3,24(%r3)
- lgr %r4,%r5
larl %r8,memory_size
stg %r5,0(%r8) # store memory size
-#
-# Running native the HSA is located at 2GB and we will get an
-# addressing exception trying to access it. We have to restart
-# the scan at 2GB to find out if the machine has more than 2GB.
-#
+ ahi %r10,-1 # update chunk number
+.Lchkloop:
+ lr %r6,%r7 # set access code to last cc
+ # we got an exception or we're starting a new
+ # chunk , we must check if we should
+ # still try to find valid memory (if we detected
+ # the amount of available storage), and if we
+ # have chunks left
lghi %r4,1
sllg %r4,%r4,31
clgr %r5,%r4
- jhe .Ldonemem
- lgr %r5,%r4
- j .Lloop
+ je .Lhsaskip
+ xr %r0, %r0
+ clgr %r0, %r9 # did we detect memory?
+ je .Ldonemem # if not, leave
+ chi %r10, 0 # do we have chunks left?
+ je .Ldonemem
+.Lhsaskip:
+ algr %r5,%r1 # add 128KB to end of chunk
+ lgr %r4,%r5 # potential new chunk
+ clgr %r5,%r9 # should we go on?
+ jl .Lloop
.Ldonemem:
larl %r12,machine_flags
@@ -640,6 +709,23 @@
.byte "root=/dev/ram0 ro"
.byte 0
.org 0x11000
+.Lsccb:
+ .hword 0x1000 # length, one page
+ .byte 0x00,0x00,0x00
+ .byte 0x80 # variable response bit set
+.Lsccbr:
+ .hword 0x00 # response code
+.Lscpincr1:
+ .hword 0x00
+.Lscpa1:
+ .byte 0x00
+ .fill 89,1,0
+.Lscpa2:
+ .int 0x00
+.Lscpincr2:
+ .quad 0x00
+ .fill 3984,1,0
+ .org 0x12000
.global _pend
_pend:
diff -urN linux-2.6/arch/s390/kernel/setup.c linux-2.6-s390/arch/s390/kernel/setup.c
--- linux-2.6/arch/s390/kernel/setup.c Mon May 10 04:32:00 2004
+++ linux-2.6-s390/arch/s390/kernel/setup.c Fri Jun 11 19:09:49 2004
@@ -53,7 +53,9 @@
unsigned int console_irq = -1;
unsigned long memory_size = 0;
unsigned long machine_flags = 0;
-struct { unsigned long addr, size, type; } memory_chunk[16] = { { 0 } };
+struct {
+ unsigned long addr, size, type;
+} memory_chunk[MEMORY_CHUNKS] = { { 0 } };
#define CHUNK_READ_WRITE 0
#define CHUNK_READ_ONLY 1
int cpus_initialized = 0;
diff -urN linux-2.6/arch/s390/mm/extmem.c linux-2.6-s390/arch/s390/mm/extmem.c
--- linux-2.6/arch/s390/mm/extmem.c Mon May 10 04:32:54 2004
+++ linux-2.6-s390/arch/s390/mm/extmem.c Fri Jun 11 19:09:49 2004
@@ -55,7 +55,9 @@
static spinlock_t dcss_lock = SPIN_LOCK_UNLOCKED;
static struct list_head dcss_list = LIST_HEAD_INIT(dcss_list);
-extern struct {unsigned long addr, size, type;} memory_chunk[16];
+extern struct {
+ unsigned long addr, size, type;
+} memory_chunk[MEMORY_CHUNKS];
/*
* Create the 8 bytes, ebcdic VM segment name from
@@ -258,16 +260,16 @@
shared segment */
dcss_diag_query(dcss_name, &rwattr, &shattr, &segstart, &segend);
/* does segment collide with main memory? */
- for (i=0; i<16; i++) {
- if (memory_chunk[i].type != 0)
- continue;
- if (memory_chunk[i].addr > segend)
- continue;
- if (memory_chunk[i].addr + memory_chunk[i].size <= segstart)
- continue;
- spin_unlock(&dcss_lock);
- return -ENOENT;
- }
+ for (i=0; i < MEMORY_CHUNKS; i++) {
+ if (memory_chunk[i].type != 0)
+ continue;
+ if (memory_chunk[i].addr > segend)
+ continue;
+ if (memory_chunk[i].addr + memory_chunk[i].size <= segstart)
+ continue;
+ spin_unlock(&dcss_lock);
+ return -ENOENT;
+ }
/* or does it collide with other (loaded) segments? */
list_for_each(l, &dcss_list) {
tmp = list_entry(l, struct dcss_segment, list);
diff -urN linux-2.6/include/asm-s390/setup.h linux-2.6-s390/include/asm-s390/setup.h
--- linux-2.6/include/asm-s390/setup.h Mon May 10 04:33:19 2004
+++ linux-2.6-s390/include/asm-s390/setup.h Fri Jun 11 19:09:49 2004
@@ -12,6 +12,7 @@
#define COMMAND_LINE_SIZE 896
#define RAMDISK_ORIGIN 0x800000
#define RAMDISK_SIZE 0x800000
+#define MEMORY_CHUNKS 16 /* max 0x7fff */
#ifndef __ASSEMBLY__
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2004-06-11 17:31 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2004-06-11 17:31 [PATCH] s390: improve memory detection logic Martin Schwidefsky
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®