* [PATCH] !PCI warnings: Moxa serial
@ 2004-07-20 18:39 Geert Uytterhoeven
0 siblings, 0 replies; only message in thread
From: Geert Uytterhoeven @ 2004-07-20 18:39 UTC (permalink / raw)
To: Linus Torvalds, Andrew Morton
Cc: Linux Kernel Development, Geert Uytterhoeven
Kill warnings in MOXA Intellio and Smartio multiport serial drivers when !PCI.
Also kill warnings about unused variables in the non-modular case.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
--- linux-2.6.8-rc2/drivers/char/moxa.c 2004-04-15 11:44:11.000000000 +0200
+++ linux-m68k-2.6.8-rc2/drivers/char/moxa.c 2004-07-19 23:25:41.000000000 +0200
@@ -104,6 +104,7 @@
"CP-204J series",
};
+#ifdef CONFIG_PCI
static struct pci_device_id moxa_pcibrds[] = {
{ PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_C218, PCI_ANY_ID, PCI_ANY_ID,
0, 0, MOXA_BOARD_C218_PCI },
@@ -114,6 +115,7 @@
{ 0 }
};
MODULE_DEVICE_TABLE(pci, moxa_pcibrds);
+#endif /* CONFIG_PCI */
typedef struct _moxa_isa_board_conf {
int boardType;
@@ -190,9 +192,11 @@
static int verbose = 0;
static int ttymajor = MOXAMAJOR;
/* Variables for insmod */
+#ifdef MODULE
static int baseaddr[] = {0, 0, 0, 0};
static int type[] = {0, 0, 0, 0};
static int numports[] = {0, 0, 0, 0};
+#endif
MODULE_AUTHOR("William Chen");
MODULE_DESCRIPTION("MOXA Intellio Family Multiport Board Device Driver");
@@ -215,7 +219,6 @@
/*
* static functions:
*/
-static int moxa_get_PCI_conf(struct pci_dev *, int, moxa_board_conf *);
static void do_moxa_softint(void *);
static int moxa_open(struct tty_struct *, struct file *);
static void moxa_close(struct tty_struct *, struct file *);
@@ -296,6 +299,32 @@
.tiocmset = moxa_tiocmset,
};
+#ifdef CONFIG_PCI
+static int moxa_get_PCI_conf(struct pci_dev *p, int board_type, moxa_board_conf * board)
+{
+ board->baseAddr = pci_resource_start (p, 2);
+ board->boardType = board_type;
+ switch (board_type) {
+ case MOXA_BOARD_C218_ISA:
+ case MOXA_BOARD_C218_PCI:
+ board->numPorts = 8;
+ break;
+
+ case MOXA_BOARD_CP204J:
+ board->numPorts = 4;
+ break;
+ default:
+ board->numPorts = 0;
+ break;
+ }
+ board->busType = MOXA_BUS_TYPE_PCI;
+ board->pciInfo.busNum = p->bus->number;
+ board->pciInfo.devNum = p->devfn >> 3;
+
+ return (0);
+}
+#endif /* CONFIG_PCI */
+
static int __init moxa_init(void)
{
int i, numBoards;
@@ -469,30 +498,6 @@
module_init(moxa_init);
module_exit(moxa_exit);
-static int moxa_get_PCI_conf(struct pci_dev *p, int board_type, moxa_board_conf * board)
-{
- board->baseAddr = pci_resource_start (p, 2);
- board->boardType = board_type;
- switch (board_type) {
- case MOXA_BOARD_C218_ISA:
- case MOXA_BOARD_C218_PCI:
- board->numPorts = 8;
- break;
-
- case MOXA_BOARD_CP204J:
- board->numPorts = 4;
- break;
- default:
- board->numPorts = 0;
- break;
- }
- board->busType = MOXA_BUS_TYPE_PCI;
- board->pciInfo.busNum = p->bus->number;
- board->pciInfo.devNum = p->devfn >> 3;
-
- return (0);
-}
-
static void do_moxa_softint(void *private_)
{
struct moxa_str *ch = (struct moxa_str *) private_;
--- linux-2.6.8-rc2/drivers/char/mxser.c 2004-07-15 23:14:13.000000000 +0200
+++ linux-m68k-2.6.8-rc2/drivers/char/mxser.c 2004-07-19 23:21:13.000000000 +0200
@@ -198,6 +198,7 @@
#define MOXA_GET_CUMAJOR (MOXA + 64)
#define MOXA_GETMSTATUS (MOXA + 65)
+#ifdef CONFIG_PCI
static struct pci_device_id mxser_pcibrds[] = {
{ PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_C168, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
MXSER_BOARD_C168_PCI },
@@ -214,6 +215,7 @@
{ 0 }
};
MODULE_DEVICE_TABLE(pci, mxser_pcibrds);
+#endif /* CONFIG_PCI */
static int ioaddr[MXSER_BOARDS];
static int ttymajor = MXSERMAJOR;
@@ -330,7 +332,6 @@
static void mxser_getcfg(int board, struct mxser_hwconf *hwconf);
static int mxser_get_ISA_conf(int, struct mxser_hwconf *);
-static int mxser_get_PCI_conf(struct pci_dev *, int, struct mxser_hwconf *);
static void mxser_do_softint(void *);
static int mxser_open(struct tty_struct *, struct file *);
static void mxser_close(struct tty_struct *, struct file *);
@@ -461,6 +462,7 @@
mxsercfg[board] = *hwconf;
}
+#ifdef CONFIG_PCI
static int mxser_get_PCI_conf(struct pci_dev *pdev, int board_type, struct mxser_hwconf *hwconf)
{
int i;
@@ -485,6 +487,7 @@
}
return (0);
}
+#endif /* CONFIG_PCI */
static struct tty_operations mxser_ops = {
.open = mxser_open,
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2004-07-20 19:45 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2004-07-20 18:39 [PATCH] !PCI warnings: Moxa serial Geert Uytterhoeven
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®