mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Erik Mouw <erik@harddisk-recovery.com>
To: Mikael Pettersson <mikpe@csd.uu.se>
Cc: linux-kernel@vger.kernel.org, wli@holomorphy.com
Subject: Re: 2.4.26 doesn't boot on a 386 without "Unsynced TSC support"
Date: Thu, 29 Jul 2004 15:36:17 +0200	[thread overview]
Message-ID: <20040729133617.GG1395@harddisk-recovery.com> (raw)
In-Reply-To: <200407281908.i6SJ8c9I015801@harpo.it.uu.se>

On Wed, Jul 28, 2004 at 09:08:38PM +0200, Mikael Pettersson wrote:
> On Wed, 28 Jul 2004 17:47:49 +0200, Erik Mouw wrote:
> >My question is: is this a code bug, or a documentation bug? Right now,
> >I guess 2.4.26 will not run on anything < Pentium without
> >CONFIG_X86_TSC_DISABLE enabled.
> 
> It's a limitation in scripts/Configure.
> If you start with a .config with TSC enabled/required,
> and just flip the CPU selection option to a TSC-less
> CPU, like 386 or 486, then you end up with a .config
> that _still_ has TSC enabled/required.

I was indeed starting from a "known good" .config for an Athlon.

> The workaround is to run 'make oldconfig' afterwards.

That did the trick.


Thanks for the explanation,

Erik

-- 
+-- Erik Mouw -- www.harddisk-recovery.com -- +31 70 370 12 90 --
| Lab address: Delftechpark 26, 2628 XH, Delft, The Netherlands

  reply	other threads:[~2004-07-29 13:36 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2004-07-28 19:08 Mikael Pettersson
2004-07-29 13:36 ` Erik Mouw [this message]
  -- strict thread matches above, loose matches on Subject: below --
2004-07-28 15:47 Erik Mouw

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20040729133617.GG1395@harddisk-recovery.com \
    --to=erik@harddisk-recovery.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mikpe@csd.uu.se \
    --cc=wli@holomorphy.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®