* simplify SOUND_PRIME dependencies
@ 2004-08-12 10:59 Adrian Bunk
0 siblings, 0 replies; only message in thread
From: Adrian Bunk @ 2004-08-12 10:59 UTC (permalink / raw)
To: linux-kernel; +Cc: Alex DeVries
The patch below simplifies some SOUND_PRIME dependencies.
SOUND_PRIME=m no longer allow e.g. SOUND_BT878=y, but if this was
intended SOUND_PRIME should better be a bool.
I've also added the missing dependency of SOUND_HARMONY on SOUND_PRIME.
diffstat output:
sound/oss/Kconfig | 54 +++++++++++++++++++++++-----------------------
1 files changed, 27 insertions(+), 27 deletions(-)
Signed-off-by: Adrian Bunk <bunk@fs.tum.de>
--- linux-2.6.8-rc4-mm1-full-3.4/sound/oss/Kconfig.old 2004-08-12 10:40:06.000000000 +0200
+++ linux-2.6.8-rc4-mm1-full-3.4/sound/oss/Kconfig 2004-08-12 10:46:19.000000000 +0200
@@ -6,7 +6,7 @@
# Prompt user for primary drivers.
config SOUND_BT878
tristate "BT878 audio dma"
- depends on SOUND_PRIME!=n && SOUND
+ depends on SOUND_PRIME
---help---
Audio DMA support for bt878 based grabber boards. As you might have
already noticed, bt878 is listed with two functions in /proc/pci.
@@ -22,7 +22,7 @@
config SOUND_CMPCI
tristate "C-Media PCI (CMI8338/8738)"
- depends on SOUND_PRIME!=n && SOUND && PCI
+ depends on SOUND_PRIME && PCI
help
Say Y or M if you have a PCI sound card using the CMI8338
or the CMI8738 chipset. Data on these chips are available at
@@ -61,7 +61,7 @@
config SOUND_EMU10K1
tristate "Creative SBLive! (EMU10K1)"
- depends on SOUND_PRIME!=n && SOUND && PCI
+ depends on SOUND_PRIME && PCI
---help---
Say Y or M if you have a PCI sound card using the EMU10K1 chipset,
such as the Creative SBLive!, SB PCI512 or Emu-APS.
@@ -87,7 +87,7 @@
config SOUND_FUSION
tristate "Crystal SoundFusion (CS4280/461x)"
- depends on SOUND_PRIME!=n && SOUND
+ depends on SOUND_PRIME
help
This module drives the Crystal SoundFusion devices (CS4280/46xx
series) when wired as native sound drivers with AC97 codecs. If
@@ -95,14 +95,14 @@
config SOUND_CS4281
tristate "Crystal Sound CS4281"
- depends on SOUND_PRIME!=n && SOUND
+ depends on SOUND_PRIME
help
Picture and feature list at
<http://www.pcbroker.com/crystal4281.html>.
config SOUND_ES1370
tristate "Ensoniq AudioPCI (ES1370)"
- depends on SOUND_PRIME!=n && SOUND && PCI && SOUND_GAMEPORT
+ depends on SOUND_PRIME && PCI && SOUND_GAMEPORT
help
Say Y or M if you have a PCI sound card utilizing the Ensoniq
ES1370 chipset, such as Ensoniq's AudioPCI (non-97). To find
@@ -115,7 +115,7 @@
config SOUND_ES1371
tristate "Creative Ensoniq AudioPCI 97 (ES1371)"
- depends on SOUND_PRIME!=n && SOUND && PCI && SOUND_GAMEPORT
+ depends on SOUND_PRIME && PCI && SOUND_GAMEPORT
help
Say Y or M if you have a PCI sound card utilizing the Ensoniq
ES1371 chipset, such as Ensoniq's AudioPCI97. To find out if
@@ -128,7 +128,7 @@
config SOUND_ESSSOLO1
tristate "ESS Technology Solo1"
- depends on SOUND_PRIME!=n && SOUND && SOUND_GAMEPORT
+ depends on SOUND_PRIME && SOUND_GAMEPORT
help
Say Y or M if you have a PCI sound card utilizing the ESS Technology
Solo1 chip. To find out if your sound card uses a
@@ -139,7 +139,7 @@
config SOUND_MAESTRO
tristate "ESS Maestro, Maestro2, Maestro2E driver"
- depends on SOUND_PRIME!=n && SOUND
+ depends on SOUND_PRIME
help
Say Y or M if you have a sound system driven by ESS's Maestro line
of PCI sound chips. These include the Maestro 1, Maestro 2, and
@@ -148,25 +148,25 @@
config SOUND_MAESTRO3
tristate "ESS Maestro3/Allegro driver (EXPERIMENTAL)"
- depends on SOUND_PRIME!=n && SOUND && PCI && EXPERIMENTAL
+ depends on SOUND_PRIME && PCI && EXPERIMENTAL
help
Say Y or M if you have a sound system driven by ESS's Maestro 3
PCI sound chip.
config SOUND_ICH
tristate "Intel ICH (i8xx) audio support"
- depends on SOUND_PRIME!=n && PCI
+ depends on SOUND_PRIME && PCI
help
Support for integral audio in Intel's I/O Controller Hub (ICH)
chipset, as used on the 810/820/840 motherboards.
config SOUND_HARMONY
tristate "PA Harmony audio driver"
- depends on GSC_LASI && SOUND
+ depends on GSC_LASI && SOUND_PRIME
config SOUND_SONICVIBES
tristate "S3 SonicVibes"
- depends on SOUND_PRIME!=n && SOUND && SOUND_GAMEPORT
+ depends on SOUND_PRIME && SOUND_GAMEPORT
help
Say Y or M if you have a PCI sound card utilizing the S3
SonicVibes chipset. To find out if your sound card uses a
@@ -177,7 +177,7 @@
config SOUND_VWSND
tristate "SGI Visual Workstation Sound"
- depends on SOUND_PRIME!=n && X86_VISWS && SOUND
+ depends on SOUND_PRIME && X86_VISWS
help
Say Y or M if you have an SGI Visual Workstation and you want to be
able to use its on-board audio. Read
@@ -186,14 +186,14 @@
config SOUND_HAL2
tristate "SGI HAL2 sound (EXPERIMENTAL)"
- depends on SOUND_PRIME!=n && SOUND && SGI_IP22 && EXPERIMENTAL
+ depends on SOUND_PRIME && SGI_IP22 && EXPERIMENTAL
help
Say Y or M if you have an SGI Indy system and want to be able to
use it's on-board A2 audio system.
config SOUND_VRC5477
tristate "NEC Vrc5477 AC97 sound"
- depends on SOUND_PRIME!=n && DDB5477 && SOUND
+ depends on SOUND_PRIME && DDB5477
help
Say Y here to enable sound support for the NEC Vrc5477 chip, an
integrated, multi-function controller chip for MIPS CPUs. Works
@@ -201,7 +201,7 @@
config SOUND_TRIDENT
tristate "Trident 4DWave DX/NX, SiS 7018 or ALi 5451 PCI Audio Core"
- depends on SOUND_PRIME!=n && SOUND && SOUND_GAMEPORT
+ depends on SOUND_PRIME && SOUND_GAMEPORT
---help---
Say Y or M if you have a PCI sound card utilizing the Trident
4DWave-DX/NX chipset or your mother board chipset has SiS 7018
@@ -242,7 +242,7 @@
config SOUND_MSNDCLAS
tristate "Support for Turtle Beach MultiSound Classic, Tahiti, Monterey"
- depends on SOUND_PRIME!=n && SOUND && (m || !STANDALONE)
+ depends on SOUND_PRIME && (m || !STANDALONE)
help
Say M here if you have a Turtle Beach MultiSound Classic, Tahiti or
Monterey (not for the Pinnacle or Fiji).
@@ -306,7 +306,7 @@
config SOUND_MSNDPIN
tristate "Support for Turtle Beach MultiSound Pinnacle, Fiji"
- depends on SOUND_PRIME!=n && SOUND && (m || !STANDALONE)
+ depends on SOUND_PRIME && (m || !STANDALONE)
help
Say M here if you have a Turtle Beach MultiSound Pinnacle or Fiji.
See <file:Documentation/sound/oss/MultiSound> for important information
@@ -467,7 +467,7 @@
config SOUND_VIA82CXXX
tristate "VIA 82C686 Audio Codec"
- depends on SOUND_PRIME!=n && PCI
+ depends on SOUND_PRIME && PCI
help
Say Y here to include support for the audio codec found on VIA
82Cxxx-based chips. Typically these are built into a motherboard.
@@ -487,7 +487,7 @@
config SOUND_OSS
tristate "OSS sound modules"
- depends on SOUND_PRIME!=n && SOUND
+ depends on SOUND_PRIME
help
OSS is the Open Sound System suite of sound card drivers. They make
sound programming easier since they provide a common API. Say Y or
@@ -1052,7 +1052,7 @@
config SOUND_TVMIXER
tristate "TV card (bt848) mixer support"
- depends on SOUND_PRIME!=n && SOUND && I2C
+ depends on SOUND_PRIME && I2C
help
Support for audio mixer facilities on the BT848 TV frame-grabber
card.
@@ -1063,11 +1063,11 @@
config SOUND_ALI5455
tristate "ALi5455 audio support"
- depends on SOUND_PRIME!=n && PCI
+ depends on SOUND_PRIME && PCI
config SOUND_FORTE
tristate "ForteMedia FM801 driver"
- depends on SOUND_PRIME!=n && PCI
+ depends on SOUND_PRIME && PCI
help
Say Y or M if you want driver support for the ForteMedia FM801 PCI
audio controller (Abit AU10, Genius Sound Maker, HP Workstation
@@ -1075,7 +1075,7 @@
config SOUND_RME96XX
tristate "RME Hammerfall (RME96XX) support"
- depends on SOUND_PRIME!=n && PCI
+ depends on SOUND_PRIME && PCI
help
Say Y or M if you have a Hammerfall or Hammerfall light
multichannel card from RME. If you want to acess advanced
@@ -1083,11 +1083,11 @@
config SOUND_AD1980
tristate "AD1980 front/back switch plugin"
- depends on SOUND_PRIME!=n
+ depends on SOUND_PRIME
config SOUND_SH_DAC_AUDIO
tristate "SuperH DAC audio support"
- depends on SOUND_PRIME!=n && SOUND && CPU_SH3
+ depends on SOUND_PRIME && CPU_SH3
config SOUND_SH_DAC_AUDIO_CHANNEL
int " DAC channel"
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2004-08-12 11:00 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2004-08-12 10:59 simplify SOUND_PRIME dependencies Adrian Bunk
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®