From: Matthew Wilcox <matthew@wil.cx>
To: Linus Torvalds <torvalds@osdl.org>, Andrew Morton <akpm@zip.com.au>
Cc: linux-kernel@vger.kernel.org, linux-pci@atrey.karlin.mff.cuni.cz,
parisc-linux@parisc-linux.org
Subject: [PATCH] Sort generic PCI fixups after specific ones
Date: Wed, 22 Sep 2004 22:43:04 +0100 [thread overview]
Message-ID: <20040922214304.GS16153@parcelfarce.linux.theplanet.co.uk> (raw)
The recent change that allowed PCI fixups to be declared everywhere
broke IDE on PA-RISC by making the generic IDE fixup be applied before
the PA-RISC specific one. This patch fixes that by sorting generic fixups
after the specific ones. It also obeys the 80-column limit and reduces
the amount of grotty macro code.
I'd like to thank Joel Soete for his work tracking down the source of
this problem.
Index: linux-2.6/drivers/pci/quirks.c
===================================================================
RCS file: /var/cvs/linux-2.6/drivers/pci/quirks.c,v
retrieving revision 1.16
diff -u -p -r1.16 quirks.c
--- linux-2.6/drivers/pci/quirks.c 13 Sep 2004 15:23:21 -0000 1.16
+++ linux-2.6/drivers/pci/quirks.c 22 Sep 2004 21:38:17 -0000
@@ -543,7 +543,7 @@ static void __devinit quirk_cardbus_lega
return;
pci_write_config_dword(dev, PCI_CB_LEGACY_MODE_BASE, 0);
}
-DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, quirk_cardbus_legacy );
+DECLARE_PCI_FIXUP_FINAL_ALL(quirk_cardbus_legacy);
/*
* Following the PCI ordering rules is optional on the AMD762. I'm not
@@ -661,7 +661,7 @@ static void __devinit quirk_ide_bases(st
printk(KERN_INFO "PCI: Ignoring BAR%d-%d of IDE controller %s\n",
first_bar, last_bar, pci_name(dev));
}
-DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, quirk_ide_bases );
+DECLARE_PCI_FIXUP_HEADER_ALL(quirk_ide_bases);
/*
* Ensure C0 rev restreaming is off. This is normally done by
Index: linux-2.6/include/asm-generic/vmlinux.lds.h
===================================================================
RCS file: /var/cvs/linux-2.6/include/asm-generic/vmlinux.lds.h,v
retrieving revision 1.4
diff -u -p -r1.4 vmlinux.lds.h
--- linux-2.6/include/asm-generic/vmlinux.lds.h 13 Sep 2004 15:24:02 -0000 1.4
+++ linux-2.6/include/asm-generic/vmlinux.lds.h 22 Sep 2004 21:38:23 -0000
@@ -20,9 +20,11 @@
.pci_fixup : AT(ADDR(.pci_fixup) - LOAD_OFFSET) { \
VMLINUX_SYMBOL(__start_pci_fixups_header) = .; \
*(.pci_fixup_header) \
+ *(.pci_fixup_header_all) \
VMLINUX_SYMBOL(__end_pci_fixups_header) = .; \
VMLINUX_SYMBOL(__start_pci_fixups_final) = .; \
*(.pci_fixup_final) \
+ *(.pci_fixup_final_all) \
VMLINUX_SYMBOL(__end_pci_fixups_final) = .; \
} \
\
Index: linux-2.6/include/linux/pci.h
===================================================================
RCS file: /var/cvs/linux-2.6/include/linux/pci.h,v
retrieving revision 1.18
diff -u -p -r1.18 pci.h
--- linux-2.6/include/linux/pci.h 13 Sep 2004 15:24:12 -0000 1.18
+++ linux-2.6/include/linux/pci.h 22 Sep 2004 21:38:25 -0000
@@ -1011,15 +1011,22 @@ enum pci_fixup_pass {
};
/* Anonymous variables would be nice... */
-#define DECLARE_PCI_FIXUP_HEADER(vendor, device, hook) \
- static struct pci_fixup __pci_fixup_##vendor##device##hook __attribute_used__ \
- __attribute__((__section__(".pci_fixup_header"))) = { \
- vendor, device, hook };
-
-#define DECLARE_PCI_FIXUP_FINAL(vendor, device, hook) \
- static struct pci_fixup __pci_fixup_##vendor##device##hook __attribute_used__ \
- __attribute__((__section__(".pci_fixup_final"))) = { \
+#define DECLARE_PCI_FIXUP_SECTION(section, name, vendor, device, hook) \
+ static struct pci_fixup __pci_fixup_##name \
+ __attribute_used__ __attribute__((__section__( #section ))) = { \
vendor, device, hook };
+#define DECLARE_PCI_FIXUP_HEADER(vendor, device, hook) \
+ DECLARE_PCI_FIXUP_SECTION(.pci_fixup_header, \
+ vendor##device##hook, vendor, device, hook)
+#define DECLARE_PCI_FIXUP_HEADER_ALL(hook) \
+ DECLARE_PCI_FIXUP_SECTION(.pci_fixup_header_all, \
+ ALL_DEVICES##hook, PCI_ANY_ID, PCI_ANY_ID, hook)
+#define DECLARE_PCI_FIXUP_FINAL(vendor, device, hook) \
+ DECLARE_PCI_FIXUP_SECTION(.pci_fixup_final, \
+ vendor##device##hook, vendor, device, hook)
+#define DECLARE_PCI_FIXUP_FINAL_ALL(hook) \
+ DECLARE_PCI_FIXUP_SECTION(.pci_fixup_final_all, \
+ ALL_DEVICES##hook, PCI_ANY_ID, PCI_ANY_ID, hook)
void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev);
--
"Next the statesmen will invent cheap lies, putting the blame upon
the nation that is attacked, and every man will be glad of those
conscience-soothing falsities, and will diligently study them, and refuse
to examine any refutations of them; and thus he will by and by convince
himself that the war is just, and will thank God for the better sleep
he enjoys after this process of grotesque self-deception." -- Mark Twain
next reply other threads:[~2004-09-22 21:45 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-09-22 21:43 Matthew Wilcox [this message]
2004-09-23 16:03 ` [parisc-linux] " Joel Soete
2004-09-23 17:20 ` Greg KH
2004-09-23 17:31 ` Matthew Wilcox
2004-09-23 22:33 ` Ivan Kokshaysky
2004-09-30 17:41 ` Matthew Wilcox
2004-10-01 15:13 ` [parisc-linux] " Joel Soete
2004-10-01 21:48 ` Ivan Kokshaysky
2004-10-05 15:29 ` Matthew Wilcox
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20040922214304.GS16153@parcelfarce.linux.theplanet.co.uk \
--to=matthew@wil.cx \
--cc=akpm@zip.com.au \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@atrey.karlin.mff.cuni.cz \
--cc=parisc-linux@parisc-linux.org \
--cc=torvalds@osdl.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome