From: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
To: Matthew Wilcox <matthew@wil.cx>
Cc: Greg KH <greg@kroah.com>, Linus Torvalds <torvalds@osdl.org>,
Andrew Morton <akpm@zip.com.au>,
linux-kernel@vger.kernel.org, linux-pci@atrey.karlin.mff.cuni.cz,
parisc-linux@parisc-linux.org
Subject: Re: [PATCH] Sort generic PCI fixups after specific ones
Date: Sat, 2 Oct 2004 01:48:17 +0400 [thread overview]
Message-ID: <20041002014817.A24292@jurassic.park.msu.ru> (raw)
In-Reply-To: <20040930174155.GT16153@parcelfarce.linux.theplanet.co.uk>; from matthew@wil.cx on Thu, Sep 30, 2004 at 06:41:55PM +0100
On Thu, Sep 30, 2004 at 06:41:55PM +0100, Matthew Wilcox wrote:
> Allow prioritising PCI fixups. "How it works" is covered in the comment
> in pci.h. The patch to superio.c may well only apply with fuzz to the
> current Linux tree; I include it only to show an example.
No, you missed my point.
What we need is yet another PCI fixup *pass*, not prioritizing fixups
inside *one* pass - see appended patch (compile tested only).
Speaking of IDE: generally, you cannot switch PCI IDE controller
from "compatible" to native mode in the "fixup header" pass, as at this
point PCI BARs are *already* probed, and in compatible mode a lot of IDE
controllers have some bogus (often read-only) values in the BARs 0-3.
That's why quirk_ide_bases() fixup exists in the first place.
So that parisc superio fix works by mere luck - probably because IDE
BARs 0-3 are readable/writable even in legacy mode on this particular
controller.
Ivan.
--- 2.6/include/asm-generic/vmlinux.lds.h Mon Sep 27 14:38:14 2004
+++ linux/include/asm-generic/vmlinux.lds.h Fri Oct 1 15:24:30 2004
@@ -18,6 +18,9 @@
\
/* PCI quirks */ \
.pci_fixup : AT(ADDR(.pci_fixup) - LOAD_OFFSET) { \
+ VMLINUX_SYMBOL(__start_pci_fixups_early) = .; \
+ *(.pci_fixup_early) \
+ VMLINUX_SYMBOL(__end_pci_fixups_early) = .; \
VMLINUX_SYMBOL(__start_pci_fixups_header) = .; \
*(.pci_fixup_header) \
VMLINUX_SYMBOL(__end_pci_fixups_header) = .; \
--- 2.6/include/linux/pci.h Mon Sep 27 14:38:23 2004
+++ linux/include/linux/pci.h Fri Oct 1 16:16:51 2004
@@ -1006,20 +1006,29 @@ struct pci_fixup {
};
enum pci_fixup_pass {
- pci_fixup_header, /* Called immediately after reading configuration header */
+ pci_fixup_early, /* Called immediately after reading
+ device/vendor IDs and class code */
+ pci_fixup_header, /* Called after reading the entire
+ configuration header (including BARs) */
pci_fixup_final, /* Final phase of device fixups */
};
/* Anonymous variables would be nice... */
-#define DECLARE_PCI_FIXUP_HEADER(vendor, device, hook) \
- static struct pci_fixup __pci_fixup_##vendor##device##hook __attribute_used__ \
- __attribute__((__section__(".pci_fixup_header"))) = { \
- vendor, device, hook };
+#define DECLARE_PCI_FIXUP_SECTION(section, name, vendor, device, hook) \
+ static struct pci_fixup __pci_fixup_##name __attribute_used__ \
+ __attribute__((__section__( #section ))) = { vendor, device, hook };
-#define DECLARE_PCI_FIXUP_FINAL(vendor, device, hook) \
- static struct pci_fixup __pci_fixup_##vendor##device##hook __attribute_used__ \
- __attribute__((__section__(".pci_fixup_final"))) = { \
- vendor, device, hook };
+#define DECLARE_PCI_FIXUP_EARLY(vendor, device, hook) \
+ DECLARE_PCI_FIXUP_SECTION(.pci_fixup_early, \
+ vendor##device##hook, vendor, device, hook)
+
+#define DECLARE_PCI_FIXUP_HEADER(vendor, device, hook) \
+ DECLARE_PCI_FIXUP_SECTION(.pci_fixup_header, \
+ vendor##device##hook, vendor, device, hook)
+
+#define DECLARE_PCI_FIXUP_FINAL(vendor, device, hook) \
+ DECLARE_PCI_FIXUP_SECTION(.pci_fixup_final, \
+ vendor##device##hook, vendor, device, hook)
void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev);
--- 2.6/drivers/pci/quirks.c Mon Sep 27 14:37:45 2004
+++ linux/drivers/pci/quirks.c Fri Oct 1 16:24:16 2004
@@ -999,6 +999,8 @@ static void pci_do_fixups(struct pci_dev
}
}
+extern struct pci_fixup __start_pci_fixups_early[];
+extern struct pci_fixup __end_pci_fixups_early[];
extern struct pci_fixup __start_pci_fixups_header[];
extern struct pci_fixup __end_pci_fixups_header[];
extern struct pci_fixup __start_pci_fixups_final[];
@@ -1009,6 +1011,11 @@ void pci_fixup_device(enum pci_fixup_pas
struct pci_fixup *start, *end;
switch(pass) {
+ case pci_fixup_early:
+ start = __start_pci_fixups_early;
+ end = __end_pci_fixups_early;
+ break;
+
case pci_fixup_header:
start = __start_pci_fixups_header;
end = __end_pci_fixups_header;
--- 2.6/drivers/pci/probe.c Mon Sep 27 14:37:45 2004
+++ linux/drivers/pci/probe.c Fri Oct 1 15:30:00 2004
@@ -475,6 +475,9 @@ static int pci_setup_device(struct pci_d
/* "Unknown power state" */
dev->current_state = 4;
+ /* Early fixups, before probing the BARs */
+ pci_fixup_device(pci_fixup_early, dev);
+
switch (dev->hdr_type) { /* header type */
case PCI_HEADER_TYPE_NORMAL: /* standard header */
if (class == PCI_CLASS_BRIDGE_PCI)
--- 2.6/drivers/parisc/superio.c Mon Sep 27 14:37:45 2004
+++ linux/drivers/parisc/superio.c Fri Oct 1 15:32:20 2004
@@ -484,7 +484,7 @@ void superio_fixup_pci(struct pci_dev *p
pci_read_config_byte(pdev, PCI_CLASS_PROG, &prog);
printk("PCI: Enabled native mode for NS87415 (pif=0x%x)\n", prog);
}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_87415, superio_fixup_pci);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_87415, superio_fixup_pci);
/* Because of a defect in Super I/O, all reads of the PCI DMA status
* registers, IDE status register and the IDE select register need to be
next prev parent reply other threads:[~2004-10-01 21:53 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-09-22 21:43 Matthew Wilcox
2004-09-23 16:03 ` [parisc-linux] " Joel Soete
2004-09-23 17:20 ` Greg KH
2004-09-23 17:31 ` Matthew Wilcox
2004-09-23 22:33 ` Ivan Kokshaysky
2004-09-30 17:41 ` Matthew Wilcox
2004-10-01 15:13 ` [parisc-linux] " Joel Soete
2004-10-01 21:48 ` Ivan Kokshaysky [this message]
2004-10-05 15:29 ` Matthew Wilcox
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20041002014817.A24292@jurassic.park.msu.ru \
--to=ink@jurassic.park.msu.ru \
--cc=akpm@zip.com.au \
--cc=greg@kroah.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@atrey.karlin.mff.cuni.cz \
--cc=matthew@wil.cx \
--cc=parisc-linux@parisc-linux.org \
--cc=torvalds@osdl.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®