* cannot up iface in 2.6.9, was working in 2.6.9-rc3
@ 2004-10-22 18:59 Denis Vlasenko
2004-10-22 19:17 ` Stephen Hemminger
2004-10-22 21:01 ` Stephen Hemminger
0 siblings, 2 replies; 5+ messages in thread
From: Denis Vlasenko @ 2004-10-22 18:59 UTC (permalink / raw)
To: linux-kernel; +Cc: netdev, Jeff Garzik, Stephen Hemminger
I have an onboard VIA eth:
# lspci
00:00.0 Host bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333]
00:01.0 PCI bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333 AGP]
00:0a.0 Network controller: Texas Instruments ACX 111 54Mbps Wireless Interface
00:0c.0 Network controller: Harris Semiconductor D-Links DWL-g650 A1 (rev 01)
00:10.0 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0 controller] (rev 80)
00:10.1 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0 controller] (rev 80)
00:10.2 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0 controller] (rev 80)
00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C/VT8235 PIPC Bus Master IDE (rev 06)
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 50)
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 74)
01:00.0 VGA compatible controller: nVidia Corporation NV11 [GeForce2 MX/MX 400] (rev a1)
It cannot be upped:
# ip l set dev if up
SIOCSIFFLAGS: Function not implemented
# ifconfig if up
SIOCSIFFLAGS: Function not implemented
# busybox ip l set dev if up
SIOCSIFFLAGS: Function not implemented
Strace (busybox one is smallest):
execve("/usr/bin/busybox", ["busybox", "ip", "l", "set", "dev", "if", "up"], [/* 28 vars */]) = 0
fcntl64(0, F_GETFD) = 0
fcntl64(1, F_GETFD) = 0
fcntl64(2, F_GETFD) = 0
uname({sys="Linux", node="shadow", ...}) = 0
geteuid32() = 0
getuid32() = 0
getegid32() = 0
getgid32() = 0
brk(0) = 0x81ab000
brk(0x81ac000) = 0x81ac000
socket(PF_INET, SOCK_DGRAM, IPPROTO_IP) = 4
ioctl(4, 0x8913, 0xbffff9e0) = 0
ioctl(4, 0x8914, 0xbffff9e0) = -1 ENOSYS (Function not implemented)
dup(2) = 5
fcntl64(5, F_GETFL) = 0x2 (flags O_RDWR)
fstat64(5, {st_mode=S_IFCHR|0600, st_rdev=makedev(136, 2), ...}) = 0
old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x40000000
_llseek(5, 0, 0xbffff830, SEEK_CUR) = -1 ESPIPE (Illegal seek)
write(5, "SIOCSIFFLAGS: Function not imple"..., 39) = 39
close(5) = 0
munmap(0x40000000, 4096) = 0
close(4) = 0
write(2, "BusyBox v1.00-pre8 (2004.03.31-2"..., 295) = 295
_exit(1)
It was working in 2.6.9-rc3.
drivers/net/via-rhine.c did not change between rc3 and "official" 2.6.9
--
vda
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: cannot up iface in 2.6.9, was working in 2.6.9-rc3
2004-10-22 18:59 cannot up iface in 2.6.9, was working in 2.6.9-rc3 Denis Vlasenko
@ 2004-10-22 19:17 ` Stephen Hemminger
2004-10-22 20:42 ` Denis Vlasenko
2004-10-22 21:01 ` Stephen Hemminger
1 sibling, 1 reply; 5+ messages in thread
From: Stephen Hemminger @ 2004-10-22 19:17 UTC (permalink / raw)
To: Denis Vlasenko; +Cc: linux-kernel, netdev, Jeff Garzik
On Fri, 22 Oct 2004 21:59:26 +0300
Denis Vlasenko <vda@port.imtp.ilyichevsk.odessa.ua> wrote:
> I have an onboard VIA eth:
>
> # lspci
> 00:00.0 Host bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333]
> 00:01.0 PCI bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333 AGP]
> 00:0a.0 Network controller: Texas Instruments ACX 111 54Mbps Wireless Interface
> 00:0c.0 Network controller: Harris Semiconductor D-Links DWL-g650 A1 (rev 01)
> 00:10.0 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0 controller] (rev 80)
> 00:10.1 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0 controller] (rev 80)
> 00:10.2 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0 controller] (rev 80)
> 00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
> 00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
> 00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C/VT8235 PIPC Bus Master IDE (rev 06)
> 00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 50)
> 00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 74)
> 01:00.0 VGA compatible controller: nVidia Corporation NV11 [GeForce2 MX/MX 400] (rev a1)
>
> It cannot be upped:
>
> # ip l set dev if up
> SIOCSIFFLAGS: Function not implemented
> # ifconfig if up
> SIOCSIFFLAGS: Function not implemented
> # busybox ip l set dev if up
> SIOCSIFFLAGS: Function not implemented
>
> Strace (busybox one is smallest):
>
> execve("/usr/bin/busybox", ["busybox", "ip", "l", "set", "dev", "if", "up"], [/* 28 vars */]) = 0
> fcntl64(0, F_GETFD) = 0
> fcntl64(1, F_GETFD) = 0
> fcntl64(2, F_GETFD) = 0
> uname({sys="Linux", node="shadow", ...}) = 0
> geteuid32() = 0
> getuid32() = 0
> getegid32() = 0
> getgid32() = 0
> brk(0) = 0x81ab000
> brk(0x81ac000) = 0x81ac000
> socket(PF_INET, SOCK_DGRAM, IPPROTO_IP) = 4
> ioctl(4, 0x8913, 0xbffff9e0) = 0
> ioctl(4, 0x8914, 0xbffff9e0) = -1 ENOSYS (Function not implemented)
> dup(2) = 5
> fcntl64(5, F_GETFL) = 0x2 (flags O_RDWR)
> fstat64(5, {st_mode=S_IFCHR|0600, st_rdev=makedev(136, 2), ...}) = 0
> old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x40000000
> _llseek(5, 0, 0xbffff830, SEEK_CUR) = -1 ESPIPE (Illegal seek)
> write(5, "SIOCSIFFLAGS: Function not imple"..., 39) = 39
> close(5) = 0
> munmap(0x40000000, 4096) = 0
> close(4) = 0
> write(2, "BusyBox v1.00-pre8 (2004.03.31-2"..., 295) = 295
> _exit(1)
>
> It was working in 2.6.9-rc3.
>
> drivers/net/via-rhine.c did not change between rc3 and "official" 2.6.9
> --
> vda
It probably isn't the via driver at all, but something in the ioctl layer.
Try it without using the busybox version of ifconfig and ip.
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: cannot up iface in 2.6.9, was working in 2.6.9-rc3
2004-10-22 19:17 ` Stephen Hemminger
@ 2004-10-22 20:42 ` Denis Vlasenko
0 siblings, 0 replies; 5+ messages in thread
From: Denis Vlasenko @ 2004-10-22 20:42 UTC (permalink / raw)
To: Stephen Hemminger; +Cc: linux-kernel, netdev, Jeff Garzik
[-- Attachment #1: Type: text/plain, Size: 789 bytes --]
On Friday 22 October 2004 22:17, Stephen Hemminger wrote:
> On Fri, 22 Oct 2004 21:59:26 +0300
> > It cannot be upped:
> >
> > # ip l set dev if up
> > SIOCSIFFLAGS: Function not implemented
> > # ifconfig if up
> > SIOCSIFFLAGS: Function not implemented
> > # busybox ip l set dev if up
> > SIOCSIFFLAGS: Function not implemented
>
> It probably isn't the via driver at all, but something in the ioctl layer.
> Try it without using the busybox version of ifconfig and ip.
As shown above, I did it. All three utilities fail.
I rechecked that rc3 works and found out that rc4 does not.
I also booted with init=/bin/sh and ran 'ip l set dev eth0 up'
- it fails under rc4, but works under rc3. This rules out
my userspace setup being somehow involved.
Config for rc4 is attached.
--
vda
[-- Attachment #2: .config.bz2 --]
[-- Type: application/x-bzip2, Size: 7770 bytes --]
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: cannot up iface in 2.6.9, was working in 2.6.9-rc3
2004-10-22 18:59 cannot up iface in 2.6.9, was working in 2.6.9-rc3 Denis Vlasenko
2004-10-22 19:17 ` Stephen Hemminger
@ 2004-10-22 21:01 ` Stephen Hemminger
2004-10-22 21:02 ` Denis Vlasenko
1 sibling, 1 reply; 5+ messages in thread
From: Stephen Hemminger @ 2004-10-22 21:01 UTC (permalink / raw)
To: Denis Vlasenko; +Cc: linux-kernel, netdev, Jeff Garzik
On Fri, 22 Oct 2004 21:59:26 +0300
Denis Vlasenko <vda@port.imtp.ilyichevsk.odessa.ua> wrote:
> I have an onboard VIA eth:
>
> # lspci
> 00:00.0 Host bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333]
> 00:01.0 PCI bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333 AGP]
> 00:0a.0 Network controller: Texas Instruments ACX 111 54Mbps Wireless Interface
> 00:0c.0 Network controller: Harris Semiconductor D-Links DWL-g650 A1 (rev 01)
> 00:10.0 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0 controller] (rev 80)
> 00:10.1 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0 controller] (rev 80)
> 00:10.2 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0 controller] (rev 80)
> 00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
> 00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
> 00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C/VT8235 PIPC Bus Master IDE (rev 06)
> 00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 50)
> 00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 74)
> 01:00.0 VGA compatible controller: nVidia Corporation NV11 [GeForce2 MX/MX 400] (rev a1)
>
> It cannot be upped:
>
> # ip l set dev if up
> SIOCSIFFLAGS: Function not implemented
> # ifconfig if up
> SIOCSIFFLAGS: Function not implemented
> # busybox ip l set dev if up
> SIOCSIFFLAGS: Function not implemented
>
> Strace (busybox one is smallest):
>
> execve("/usr/bin/busybox", ["busybox", "ip", "l", "set", "dev", "if", "up"], [/* 28 vars */]) = 0
> fcntl64(0, F_GETFD) = 0
> fcntl64(1, F_GETFD) = 0
> fcntl64(2, F_GETFD) = 0
> uname({sys="Linux", node="shadow", ...}) = 0
> geteuid32() = 0
> getuid32() = 0
> getegid32() = 0
> getgid32() = 0
> brk(0) = 0x81ab000
> brk(0x81ac000) = 0x81ac000
> socket(PF_INET, SOCK_DGRAM, IPPROTO_IP) = 4
> ioctl(4, 0x8913, 0xbffff9e0) = 0
> ioctl(4, 0x8914, 0xbffff9e0) = -1 ENOSYS (Function not implemented)
> dup(2) = 5
> fcntl64(5, F_GETFL) = 0x2 (flags O_RDWR)
> fstat64(5, {st_mode=S_IFCHR|0600, st_rdev=makedev(136, 2), ...}) = 0
> old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x40000000
> _llseek(5, 0, 0xbffff830, SEEK_CUR) = -1 ESPIPE (Illegal seek)
> write(5, "SIOCSIFFLAGS: Function not imple"..., 39) = 39
> close(5) = 0
> munmap(0x40000000, 4096) = 0
> close(4) = 0
> write(2, "BusyBox v1.00-pre8 (2004.03.31-2"..., 295) = 295
> _exit(1)
>
> It was working in 2.6.9-rc3.
>
> drivers/net/via-rhine.c did not change between rc3 and "official" 2.6.9
> --
> vda
Is your ethernet device really named "if" not "eth0". You must be
using nameif or something to rename it.
Perhaps the name isn't what you expect. Look at things like:
ifconfig -a
and
ls /sys/class/net
What ever you are using to assign the name "if" to the device is (which defaults to eth0)
probably got confused
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: cannot up iface in 2.6.9, was working in 2.6.9-rc3
2004-10-22 21:01 ` Stephen Hemminger
@ 2004-10-22 21:02 ` Denis Vlasenko
0 siblings, 0 replies; 5+ messages in thread
From: Denis Vlasenko @ 2004-10-22 21:02 UTC (permalink / raw)
To: Stephen Hemminger; +Cc: linux-kernel, netdev, Jeff Garzik
On Saturday 23 October 2004 00:01, Stephen Hemminger wrote:
> On Fri, 22 Oct 2004 21:59:26 +0300
> Denis Vlasenko <vda@port.imtp.ilyichevsk.odessa.ua> wrote:
>
> > I have an onboard VIA eth:
> >
> > # lspci
> > 00:00.0 Host bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333]
> > 00:01.0 PCI bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333 AGP]
> > 00:0a.0 Network controller: Texas Instruments ACX 111 54Mbps Wireless Interface
> > 00:0c.0 Network controller: Harris Semiconductor D-Links DWL-g650 A1 (rev 01)
> > 00:10.0 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0 controller] (rev 80)
> > 00:10.1 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0 controller] (rev 80)
> > 00:10.2 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0 controller] (rev 80)
> > 00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
> > 00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
> > 00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C/VT8235 PIPC Bus Master IDE (rev 06)
> > 00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 50)
> > 00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 74)
> > 01:00.0 VGA compatible controller: nVidia Corporation NV11 [GeForce2 MX/MX 400] (rev a1)
> >
> > It cannot be upped:
> >
> > # ip l set dev if up
> > SIOCSIFFLAGS: Function not implemented
> > # ifconfig if up
> > SIOCSIFFLAGS: Function not implemented
> > # busybox ip l set dev if up
> > SIOCSIFFLAGS: Function not implemented
> >
> > Strace (busybox one is smallest):
> >
> > execve("/usr/bin/busybox", ["busybox", "ip", "l", "set", "dev", "if", "up"], [/* 28 vars */]) = 0
> > fcntl64(0, F_GETFD) = 0
> > fcntl64(1, F_GETFD) = 0
> > fcntl64(2, F_GETFD) = 0
> > uname({sys="Linux", node="shadow", ...}) = 0
> > geteuid32() = 0
> > getuid32() = 0
> > getegid32() = 0
> > getgid32() = 0
> > brk(0) = 0x81ab000
> > brk(0x81ac000) = 0x81ac000
> > socket(PF_INET, SOCK_DGRAM, IPPROTO_IP) = 4
> > ioctl(4, 0x8913, 0xbffff9e0) = 0
> > ioctl(4, 0x8914, 0xbffff9e0) = -1 ENOSYS (Function not implemented)
> > dup(2) = 5
> > fcntl64(5, F_GETFL) = 0x2 (flags O_RDWR)
> > fstat64(5, {st_mode=S_IFCHR|0600, st_rdev=makedev(136, 2), ...}) = 0
> > old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x40000000
> > _llseek(5, 0, 0xbffff830, SEEK_CUR) = -1 ESPIPE (Illegal seek)
> > write(5, "SIOCSIFFLAGS: Function not imple"..., 39) = 39
> > close(5) = 0
> > munmap(0x40000000, 4096) = 0
> > close(4) = 0
> > write(2, "BusyBox v1.00-pre8 (2004.03.31-2"..., 295) = 295
> > _exit(1)
> >
> > It was working in 2.6.9-rc3.
> >
> > drivers/net/via-rhine.c did not change between rc3 and "official" 2.6.9
> > --
> > vda
>
> Is your ethernet device really named "if" not "eth0". You must be
> using nameif or something to rename it.
>
> Perhaps the name isn't what you expect. Look at things like:
> ifconfig -a
> and
> ls /sys/class/net
I checked that the same happens with 'ip l set dev eth0 up' right
after boot with init=/bin/sh. See my other mail.
--
vda
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2004-10-22 22:17 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2004-10-22 18:59 cannot up iface in 2.6.9, was working in 2.6.9-rc3 Denis Vlasenko
2004-10-22 19:17 ` Stephen Hemminger
2004-10-22 20:42 ` Denis Vlasenko
2004-10-22 21:01 ` Stephen Hemminger
2004-10-22 21:02 ` Denis Vlasenko
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®