* [PATCH 474] HP300 DIO
@ 2004-10-31 10:02 Geert Uytterhoeven
0 siblings, 0 replies; only message in thread
From: Geert Uytterhoeven @ 2004-10-31 10:02 UTC (permalink / raw)
To: Linus Torvalds, Andrew Morton
Cc: Linux Kernel Development, Geert Uytterhoeven
HP300 DIO bus updates from Kars de Jong:
- Removed kludges for internal HPIB, no need to handle it as a DIO device
- Removed dio_scodetoviraddr() and introduced dio_scodetophysaddr() instead,
to be able to support DIO-II
- Removed trailing white space
- Changed error return code of dio_find() from 0 to -1, since select code 0
is a valid select code
- Added support for DIO-II
- Fixed problem with DIO_ENCODE_ID()
Signed-off-by: Kars de Jong <jongk@linux-m68k.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
--- linux-2.6.10-rc1/drivers/dio/dio.c 2002-07-24 23:43:15.000000000 +0200
+++ linux-m68k-2.6.10-rc1/drivers/dio/dio.c 2004-07-14 13:18:41.000000000 +0200
@@ -1,4 +1,4 @@
-/* Code to support devices on the DIO (and eventually DIO-II) bus
+/* Code to support devices on the DIO and DIO-II bus
* Copyright (C) 05/1998 Peter Maydell <pmaydell@chiark.greenend.org.uk>
*
* This code has basically these routines at the moment:
@@ -9,9 +9,8 @@
* This means that framebuffers should pass it as
* DIO_ENCODE_ID(DIO_ID_FBUFFER,DIO_ID2_TOPCAT)
* (or whatever); everybody else just uses DIO_ID_FOOBAR.
- * void *dio_scodetoviraddr(int scode)
- * Return the virtual address corresponding to the given select code.
- * NB: DIO-II devices will have to be mapped in in this routine!
+ * unsigned long dio_scodetophysaddr(int scode)
+ * Return the physical address corresponding to the given select code.
* int dio_scodetoipl(int scode)
* Every DIO card has a fixed interrupt priority level. This function
* returns it, whatever it is.
@@ -30,8 +29,9 @@
#include <linux/dio.h>
#include <linux/slab.h> /* kmalloc() */
#include <linux/init.h>
-#include <asm/hwtest.h> /* hwreg_present() */
-#include <asm/io.h> /* readb() */
+#include <asm/uaccess.h>
+#include <asm/io.h> /* readb() */
+
/* not a real config option yet! */
#define CONFIG_DIO_CONSTANTS
@@ -59,7 +59,7 @@
DIONAME(DCA0), DIONAME(DCA0REM), DIONAME(DCA1), DIONAME(DCA1REM),
DIONAME(DCM), DIONAME(DCMREM),
DIONAME(LAN),
- DIONAME(FHPIB), DIONAME(NHPIB), DIONAME(IHPIB),
+ DIONAME(FHPIB), DIONAME(NHPIB),
DIONAME(SCSI0), DIONAME(SCSI1), DIONAME(SCSI2), DIONAME(SCSI3),
DIONAME(FBUFFER),
DIONAME(PARALLEL), DIONAME(VME), DIONAME(DCL), DIONAME(DCLREM),
@@ -79,7 +79,7 @@
#define NUMNAMES (sizeof(names) / sizeof(struct dioname))
static const char *unknowndioname
- = "unknown DIO board -- please email <pmaydell@chiark.greenend.org.uk>!";
+ = "unknown DIO board -- please email <linux-m68k@lists.linux-m68k.org>!";
static const char *dio_getname(int id)
{
@@ -88,7 +88,7 @@
for (i = 0; i < NUMNAMES; i++)
if (names[i].id == id)
return names[i].name;
-
+
return unknowndioname;
}
@@ -115,54 +115,78 @@
static int __init dio_find_slow(int deviceid)
{
/* Called to find a DIO device before the full bus scan has run. Basically
- * only used by the console driver.
- * We don't do the primary+secondary ID encoding thing here. Maybe we should.
- * (that would break the topcat detection, though. I need to think about
- * the whole primary/secondary ID thing.)
- */
- int scode;
- u_char prid;
+ * only used by the console driver.
+ */
+ int scode, id;
+ u_char prid, secid, i;
+ mm_segment_t fs;
for (scode = 0; scode < DIO_SCMAX; scode++)
{
void *va;
+ unsigned long pa;
if (DIO_SCINHOLE(scode))
continue;
-
- va = dio_scodetoviraddr(scode);
- if (!va || !hwreg_present(va + DIO_IDOFF))
+
+ pa = dio_scodetophysaddr(scode);
+
+ if (!pa)
+ continue;
+
+ if (scode < DIOII_SCBASE)
+ va = (void *)(pa + DIO_VIRADDRBASE);
+ else
+ va = ioremap(pa, PAGE_SIZE);
+
+ fs = get_fs();
+ set_fs(KERNEL_DS);
+
+ if (get_user(i, (unsigned char *)va + DIO_IDOFF))
+ {
+ set_fs(fs);
+ if (scode >= DIOII_SCBASE)
+ iounmap(va);
continue; /* no board present at that select code */
+ }
+
+ set_fs(fs);
+ prid = DIO_ID(va);
- /* We aren't very likely to want to use this to get at the IHPIB,
- * but maybe it's returning the same ID as the card we do want...
- */
- if (!DIO_ISIHPIB(scode))
- prid = DIO_ID(va);
+ if (DIO_NEEDSSECID(prid))
+ {
+ secid = DIO_SECID(va);
+ id = DIO_ENCODE_ID(prid, secid);
+ }
else
- prid = DIO_ID_IHPIB;
+ id = prid;
- if (prid == deviceid)
+ if (id == deviceid)
+ {
+ if (scode >= DIOII_SCBASE)
+ iounmap(va);
return scode;
+ }
}
- return 0;
+
+ return -1;
}
-/* Aargh: we use 0 for an error return code, but select code 0 exists!
- * FIXME (trivial, use -1, but requires changes to all the drivers :-< )
- */
int dio_find(int deviceid)
{
- if (blist)
+ if (blist)
{
/* fast way */
struct dioboard *b;
for (b = blist; b; b = b->next)
if (b->id == deviceid && b->configured == 0)
return b->scode;
- return 0;
+ return -1;
+ }
+ else
+ {
+ return dio_find_slow(deviceid);
}
- return dio_find_slow(deviceid);
}
/* This is the function that scans the DIO space and works out what
@@ -170,34 +194,51 @@
*/
static int __init dio_init(void)
{
- int scode;
- struct dioboard *b, *bprev = NULL;
+ int scode;
+ struct dioboard *b, *bprev = NULL;
+ mm_segment_t fs;
+ char i;
- printk("Scanning for DIO devices...\n");
+ printk(KERN_INFO "Scanning for DIO devices...\n");
for (scode = 0; scode < DIO_SCMAX; ++scode)
{
u_char prid, secid = 0; /* primary, secondary ID bytes */
u_char *va;
+ unsigned long pa;
if (DIO_SCINHOLE(scode))
continue;
-
- va = dio_scodetoviraddr(scode);
- if (!va || !hwreg_present(va + DIO_IDOFF))
+
+ pa = dio_scodetophysaddr(scode);
+
+ if (!pa)
+ continue;
+
+ if (scode < DIOII_SCBASE)
+ va = (void *)(pa + DIO_VIRADDRBASE);
+ else
+ va = ioremap(pa, PAGE_SIZE);
+
+ fs = get_fs();
+ set_fs(KERNEL_DS);
+
+ if (get_user(i, (unsigned char *)va + DIO_IDOFF))
+ {
+ set_fs(fs);
+ if (scode >= DIOII_SCBASE)
+ iounmap(va);
continue; /* no board present at that select code */
+ }
+
+ set_fs(fs);
/* Found a board, allocate it an entry in the list */
b = kmalloc(sizeof(struct dioboard), GFP_KERNEL);
-
- /* read the ID byte(s) and encode if necessary. Note workaround
- * for broken internal HPIB devices...
- */
- if (!DIO_ISIHPIB(scode))
- prid = DIO_ID(va);
- else
- prid = DIO_ID_IHPIB;
-
+
+ /* read the ID byte(s) and encode if necessary. */
+ prid = DIO_ID(va);
+
if (DIO_NEEDSSECID(prid))
{
secid = DIO_SECID(va);
@@ -205,16 +246,19 @@
}
else
b->id = prid;
-
+
b->configured = 0;
b->scode = scode;
b->ipl = DIO_IPL(va);
b->name = dio_getname(b->id);
- printk("select code %3d: ipl %d: ID %02X", scode, b->ipl, prid);
- if (DIO_NEEDSSECID(b->id))
+ printk(KERN_INFO "select code %3d: ipl %d: ID %02X", b->scode, b->ipl, prid);
+ if (DIO_NEEDSSECID(prid))
printk(":%02X", secid);
printk(": %s\n", b->name);
-
+
+ if (scode >= DIOII_SCBASE)
+ iounmap(va);
+
b->next = NULL;
if (bprev)
@@ -223,29 +267,27 @@
blist = b;
bprev = b;
}
+
return 0;
}
subsys_initcall(dio_init);
/* Bear in mind that this is called in the very early stages of initialisation
- * in order to get the virtual address of the serial port for the console...
+ * in order to get the address of the serial port for the console...
*/
-void *dio_scodetoviraddr(int scode)
+unsigned long dio_scodetophysaddr(int scode)
{
- if (scode > DIOII_SCBASE)
+ if (scode >= DIOII_SCBASE)
{
- printk("dio_scodetoviraddr: don't support DIO-II yet!\n");
- return 0;
+ return (DIOII_BASE + (scode - 132) * DIOII_DEVSIZE);
}
else if (scode > DIO_SCMAX || scode < 0)
return 0;
else if (DIO_SCINHOLE(scode))
return 0;
- else if (DIO_ISIHPIB(scode))
- return (void*)DIO_IHPIBADDR;
- return (void*)(DIO_VIRADDRBASE + DIO_BASE + scode * 0x10000);
+ return (DIO_BASE + scode * DIO_DEVSIZE);
}
int dio_scodetoipl(int scode)
@@ -254,10 +296,10 @@
for (b = blist; b; b = b->next)
if (b->scode == scode)
break;
-
+
if (!b)
{
- printk("dio_scodetoipl: bad select code %d\n", scode);
+ printk(KERN_ERR "dio_scodetoipl: bad select code %d\n", scode);
return 0;
}
else
@@ -270,10 +312,10 @@
for (b = blist; b; b = b->next)
if (b->scode == scode)
break;
-
+
if (!b)
{
- printk("dio_scodetoname: bad select code %d\n", scode);
+ printk(KERN_ERR "dio_scodetoname: bad select code %d\n", scode);
return NULL;
}
else
@@ -286,11 +328,11 @@
for (b = blist; b; b = b->next)
if (b->scode == scode)
break;
-
+
if (!b)
- printk("dio_config_board: bad select code %d\n", scode);
+ printk(KERN_ERR "dio_config_board: bad select code %d\n", scode);
else if (b->configured)
- printk("dio_config_board: board at select code %d already configured\n", scode);
+ printk(KERN_WARNING "dio_config_board: board at select code %d already configured\n", scode);
else
b->configured = 1;
}
@@ -301,11 +343,11 @@
for (b = blist; b; b = b->next)
if (b->scode == scode)
break;
-
+
if (!b)
- printk("dio_unconfig_board: bad select code %d\n", scode);
+ printk(KERN_ERR "dio_unconfig_board: bad select code %d\n", scode);
else if (!b->configured)
- printk("dio_unconfig_board: board at select code %d not configured\n",
+ printk(KERN_WARNING "dio_unconfig_board: board at select code %d not configured\n",
scode);
else
b->configured = 0;
--- linux-2.6.10-rc1/include/linux/dio.h 2002-07-24 23:46:36.000000000 +0200
+++ linux-m68k-2.6.10-rc1/include/linux/dio.h 2004-07-14 13:20:06.000000000 +0200
@@ -28,6 +28,9 @@
* do with ioremap() though.
*/
#ifdef __KERNEL__
+
+#include <asm/hp300hw.h>
+
/* DIO/DIO-II boards all have the following 8bit registers.
* These are offsets from the base of the device.
*/
@@ -35,26 +38,7 @@
#define DIO_IPLOFF 0x03 /* interrupt priority level */
#define DIO_SECIDOFF 0x15 /* secondary device ID */
#define DIOII_SIZEOFF 0x101 /* device size, DIO-II only */
-
-/* The internal HPIB device is special; this is its physaddr; its select code is 7.
- * The reason why we have to treat it specially is because apparently it's broken:
- * the device ID isn't consistent/reliable. *sigh*
- */
-#define DIO_IHPIBADDR 0x47800
-#define DIO_IHPIBSCODE 7
-
-/* If we don't have the internal HPIB defined, then treat select code 7 like
- * any other. If we *do* have internal HPIB, then we just have to assume that
- * select code 7 is the internal HPIB regardless of the ID register :-<
- */
-#define CONFIG_IHPIB /* hack hack : not yet a proper config option */
-#ifdef CONFIG_IHPIB
-#define DIO_ISIHPIB(scode) ((scode) == DIO_IHPIBSCODE)
-#else
-#define DIO_ISIHPIB(scode) 0
-#endif
-
-#define DIO_VIRADDRBASE 0xf0000000 /* vir addr where IOspace is mapped */
+#define DIO_VIRADDRBASE 0xf0000000UL /* vir addr where IOspace is mapped */
#define DIO_BASE 0x600000 /* start of DIO space */
#define DIO_END 0x1000000 /* end of DIO space */
@@ -67,9 +51,10 @@
/* Highest valid select code. If we add DIO-II support this should become
* 256 for everything except HP320, which only has DIO.
*/
-#define DIO_SCMAX 32
+#define DIO_SCMAX (hp300_model == HP_320 ? 32 : 256)
#define DIOII_SCBASE 132 /* lowest DIO-II select code */
#define DIO_SCINHOLE(scode) (((scode) >= 32) && ((scode) < DIOII_SCBASE))
+#define DIO_ISDIOII(scode) ((scode) >= 132 && (scode) < 256)
/* macros to read device IDs, given base address */
#define DIO_ID(baseaddr) in_8((baseaddr) + DIO_IDOFF)
@@ -91,7 +76,7 @@
* In practice this is only important for framebuffers,
* and everybody else just sets ID fields equal to the DIO_ID_FOO value.
*/
-#define DIO_ENCODE_ID(pr,sec) ((((int)sec & 0xff) << 8) & ((int)pr & 0xff))
+#define DIO_ENCODE_ID(pr,sec) ((((int)sec & 0xff) << 8) | ((int)pr & 0xff))
/* macro to determine whether a given primary ID requires a secondary ID byte */
#define DIO_NEEDSSECID(id) ((id) == DIO_ID_FBUFFER)
@@ -112,10 +97,8 @@
#define DIO_DESC_LAN "98643A LANCE ethernet"
#define DIO_ID_FHPIB 0x08 /* 98625A/98625B fast HP-IB */
#define DIO_DESC_FHPIB "98625A/98625B fast HPIB"
-#define DIO_ID_NHPIB 0x80 /* 98624A HP-IB (normal ie slow) */
+#define DIO_ID_NHPIB 0x01 /* 98624A HP-IB (normal ie slow) */
#define DIO_DESC_NHPIB "98624A HPIB"
-#define DIO_ID_IHPIB 0x00 /* internal HPIB (not its real ID, it hasn't got one! */
-#define DIO_DESC_IHPIB "internal HPIB"
#define DIO_ID_SCSI0 0x07 /* 98625A SCSI */
#define DIO_DESC_SCSI0 "98625A SCSI0"
#define DIO_ID_SCSI1 0x27 /* ditto */
@@ -193,7 +176,7 @@
*/
extern int dio_find(int deviceid);
-extern void *dio_scodetoviraddr(int scode);
+extern unsigned long dio_scodetophysaddr(int scode);
extern int dio_scodetoipl(int scode);
extern const char *dio_scodetoname(int scode);
extern void dio_config_board(int scode);
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2004-10-31 10:04 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2004-10-31 10:02 [PATCH 474] HP300 DIO Geert Uytterhoeven
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®