* Re: Kernel memory requirements and BK
@ 2004-11-07 5:02 Chuck Ebbert
2004-11-09 1:52 ` Kernel memory requirements and BK [SOLVED] Art Haas
0 siblings, 1 reply; 5+ messages in thread
From: Chuck Ebbert @ 2004-11-07 5:02 UTC (permalink / raw)
To: Art Haas; +Cc: linux-kernel
Art Haas wrote:
> With the 2.6.9 and 2.6.10-rc kernels, BK bombs out with
> out-of-memory errors once the repository checking begins.
There's nothing wrong with BK's performance that can't be
solved by a terahertz processor and a terabyte of RAM. ;)
But these patches might help:
===============================================================================
# vm_pages_scanned_active_list.patch
#
# Stop kswapd from looping.
#
# Patch by Nick Piggin 24 Oct 2004
# Signed-off-by: Andrew Morton <akpm@osdl.org>
# Signed-off-by: Linus Torvalds <torvalds@osdl.org>
# Status: in 2.6.10
#
--- 2.6.9/mm/vmscan.c
+++ 2.6.9.1/mm/vmscan.c
@@ -574,7 +574,6 @@ static void shrink_cache(struct zone *zo
nr_taken++;
}
zone->nr_inactive -= nr_taken;
- zone->pages_scanned += nr_taken;
spin_unlock_irq(&zone->lru_lock);
if (nr_taken == 0)
@@ -675,6 +674,7 @@ refill_inactive_zone(struct zone *zone,
}
pgscanned++;
}
+ zone->pages_scanned += pgscanned;
zone->nr_active -= pgmoved;
spin_unlock_irq(&zone->lru_lock);
===============================================================================
# spurious_oomkill.patch
#
# Prevent spurious out of memory process kills.
# Reported to work by testers on lkml.
#
# Patch by Rik van Riel <riel@redhat.com>
# Status: NOT in 2.6.10
#
--- 2.6.9/mm/vmscan.c
+++ 2.6.9.1/mm/vmscan.c
@@ -379,7 +379,7 @@
referenced = page_referenced(page, 1);
/* In active use or really unfreeable? Activate it. */
- if (referenced && page_mapping_inuse(page))
+ if (referenced && sc->priority && page_mapping_inuse(page))
goto activate_locked;
#ifdef CONFIG_SWAP
@@ -715,7 +715,7 @@
if (page_mapped(page)) {
if (!reclaim_mapped ||
(total_swap_pages == 0 && PageAnon(page)) ||
- page_referenced(page, 0)) {
+ (page_referenced(page, 0) && sc->priority)) {
list_add(&page->lru, &l_active);
continue;
}
===============================================================================
--Chuck Ebbert 06-Nov-04 23:55:23
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: Kernel memory requirements and BK [SOLVED] 2004-11-07 5:02 Kernel memory requirements and BK Chuck Ebbert @ 2004-11-09 1:52 ` Art Haas 0 siblings, 0 replies; 5+ messages in thread From: Art Haas @ 2004-11-09 1:52 UTC (permalink / raw) To: linux-kernel On Sun, Nov 07, 2004 at 12:02:07AM -0500, Chuck Ebbert wrote: > Art Haas wrote: > > > With the 2.6.9 and 2.6.10-rc kernels, BK bombs out with > > out-of-memory errors once the repository checking begins. > > There's nothing wrong with BK's performance that can't be > solved by a terahertz processor and a terabyte of RAM. ;) > > But these patches might help: > [ snip first patch added into Linus's BK tree] > ============================================================================ > # spurious_oomkill.patch > # > # Prevent spurious out of memory process kills. > # Reported to work by testers on lkml. > # > # Patch by Rik van Riel <riel@redhat.com> > # Status: NOT in 2.6.10 > # > --- 2.6.9/mm/vmscan.c > +++ 2.6.9.1/mm/vmscan.c > @@ -379,7 +379,7 @@ > > referenced = page_referenced(page, 1); > /* In active use or really unfreeable? Activate it. */ > - if (referenced && page_mapping_inuse(page)) > + if (referenced && sc->priority && page_mapping_inuse(page)) > goto activate_locked; > > #ifdef CONFIG_SWAP > @@ -715,7 +715,7 @@ > if (page_mapped(page)) { > if (!reclaim_mapped || > (total_swap_pages == 0 && PageAnon(page)) || > - page_referenced(page, 0)) { > + (page_referenced(page, 0) && sc->priority)) { > list_add(&page->lru, &l_active); > continue; > } This patch did the trick for me. I booted up my 2.6.8.1 kernel, did a 'bk pull' to get the code (Sunday Morning), and added in this patch. After building and installing the patched kernel, I did another 'bk pull' later and things worked fine. Consider me one more person to vouch for this patch solving the OOM problem! Art Haas -- Man once surrendering his reason, has no remaining guard against absurdities the most monstrous, and like a ship without rudder, is the sport of every wind. -Thomas Jefferson to James Smith, 1822 ^ permalink raw reply [flat|nested] 5+ messages in thread
* Kernel memory requirements and BK @ 2004-11-05 14:46 Art Haas 2004-11-05 14:55 ` Grzegorz Kulewski 0 siblings, 1 reply; 5+ messages in thread From: Art Haas @ 2004-11-05 14:46 UTC (permalink / raw) To: linux-kernel Hi. I've been having problems with 'bk pull' execution when using kernels after the 2.6.8/2.6.8.1 releases. My machine has 192M of memory and 100M of swap, so I believe that the memory requirements for using BK to keep up with the kernel is sufficient, and when the machine is running with a 2.6.8.1 kernel I can 'bk pull' even if X windows is running. With the 2.6.9 and 2.6.10-rc kernels, BK bombs out with out-of-memory errors once the repository checking begins. I've run the 'bk pull' under the newer kernels without X running, as well as shutting down various daemons, and still things fail with memory errors. Here's a snippet of /var/log/messages under 2.6.10-rc1 when a 'bk pull' fails: kernel: oom-killer: gfp_mask=0xd2 kernel: DMA per-cpu: kernel: cpu 0 hot: low 2, high 6, batch 1 kernel: cpu 0 cold: low 0, high 2, batch 1 kernel: Normal per-cpu: kernel: cpu 0 hot: low 22, high 66, batch 11 kernel: cpu 0 cold: low 0, high 22, batch 11 kernel: HighMem per-cpu: empty kernel: kernel: Free pages: 420kB (0kB HighMem) kernel: Active:45877 inactive:64 dirty:0 writeback:0 unstable:0 free:105 slab:1451 mapped:45846 pagetables:195 kernel: DMA free:36kB min:36kB low:72kB high:108kB active:13684kB inactive:0kB present:16384kB pages_scanned:14695 all_unreclaimable? yes kernel: protections[]: 0 0 0 kernel: Normal free:384kB min:400kB low:800kB high:1200kB active:169824kB inactive:256kB present:180224kB pages_scanned:214215 all_unreclaimable? yes kernel: protections[]: 0 0 0 kernel: HighMem free:0kB min:128kB low:256kB high:384kB active:0kB inactive:0kB present:0kB pages_scanned:0 all_unreclaimable? no kernel: protections[]: 0 0 0 kernel: DMA: 1*4kB 0*8kB 0*16kB 1*32kB 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 36kB kernel: Normal: 0*4kB 0*8kB 0*16kB 0*32kB 0*64kB 1*128kB 1*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 384kB kernel: HighMem: empty kernel: Swap cache: add 110618, delete 108152, find 38132/44306, race 0+1 The machine used to have only 128M of memory, and 'bk pull' worked albiet _very_ slowly as the machine went heavily into swap space usage, but it seemed that once the number of files went over 20,000 or so I had to add more memory, and then once again 'bk pull' worked without any problem. I realize that there have been many, many changes to the kernel between 2.6.8 and the current BK, but my configuration for my builds has remained mostly the same, so I am at somewhat of a loss to figure out just where the extra memory usage is coming from. Is there a known set of changes that explain the additional memory requirements? Art Haas -- Man once surrendering his reason, has no remaining guard against absurdities the most monstrous, and like a ship without rudder, is the sport of every wind. -Thomas Jefferson to James Smith, 1822 ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: Kernel memory requirements and BK 2004-11-05 14:46 Kernel memory requirements and BK Art Haas @ 2004-11-05 14:55 ` Grzegorz Kulewski 2004-11-05 15:28 ` Art Haas 0 siblings, 1 reply; 5+ messages in thread From: Grzegorz Kulewski @ 2004-11-05 14:55 UTC (permalink / raw) To: Art Haas; +Cc: linux-kernel On Fri, 5 Nov 2004, Art Haas wrote: > Hi. > > I've been having problems with 'bk pull' execution when using kernels > after the 2.6.8/2.6.8.1 releases. My machine has 192M of memory and 100M > of swap, so I believe that the memory requirements for using BK to keep > up with the kernel is sufficient, and when the machine is running with a > 2.6.8.1 kernel I can 'bk pull' even if X windows is running. With the > 2.6.9 and 2.6.10-rc kernels, BK bombs out with out-of-memory errors once > the repository checking begins. I've run the 'bk pull' under the newer > kernels without X running, as well as shutting down various daemons, and > still things fail with memory errors. Maybe you have some kernel debuging options set? Some of them can eat your RAM very fast with fs heavy load. Grzegorz Kulewski ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: Kernel memory requirements and BK 2004-11-05 14:55 ` Grzegorz Kulewski @ 2004-11-05 15:28 ` Art Haas 0 siblings, 0 replies; 5+ messages in thread From: Art Haas @ 2004-11-05 15:28 UTC (permalink / raw) To: Grzegorz Kulewski; +Cc: linux-kernel On Fri, Nov 05, 2004 at 03:55:53PM +0100, Grzegorz Kulewski wrote: > On Fri, 5 Nov 2004, Art Haas wrote: > > >Hi. > > > >I've been having problems with 'bk pull' execution when using kernels > >after the 2.6.8/2.6.8.1 releases. My machine has 192M of memory and 100M > >of swap, so I believe that the memory requirements for using BK to keep > >up with the kernel is sufficient, and when the machine is running with a > >2.6.8.1 kernel I can 'bk pull' even if X windows is running. With the > >2.6.9 and 2.6.10-rc kernels, BK bombs out with out-of-memory errors once > >the repository checking begins. I've run the 'bk pull' under the newer > >kernels without X running, as well as shutting down various daemons, and > >still things fail with memory errors. > > Maybe you have some kernel debuging options set? Some of them can eat your > RAM very fast with fs heavy load. My current configuration does have a few debug options, but these options are also in my configure for the 2.6.8.1 kernel as well: $ grep -i debug ./art_config_2610 CONFIG_PNP_DEBUG=y CONFIG_NETFILTER_DEBUG=y CONFIG_SND_DEBUG=y CONFIG_SND_DEBUG_MEMORY=y CONFIG_SND_DEBUG_DETECT=y # CONFIG_JBD_DEBUG is not set # CONFIG_DEBUG_KERNEL is not set $ grep -i debug ./art_config_2681 CONFIG_PNP_DEBUG=y CONFIG_NETFILTER_DEBUG=y CONFIG_SND_DEBUG=y CONFIG_SND_DEBUG_MEMORY=y CONFIG_SND_DEBUG_DETECT=y # CONFIG_JBD_DEBUG is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set $ I believe that the PnP, Netfilter, and sound debug statements have been in my configuration for a long time, but I no longer have older copies of my '.config' files to confirm that. Here are the differences between the configuration files. Aside from a few new configuration options only found in the new kernel, nothing jumps out at me as being an option that would significantly increase the memory usage. $ diff -u ./art_config_2681 ./art_config_2610 --- ./art_config_2681 2004-08-20 08:20:02.000000000 -0500 +++ ./art_config_2610 2004-10-28 20:19:29.000000000 -0500 @@ -1,10 +1,13 @@ # # Automatically generated make config: don't edit +# Linux kernel version: 2.6.10-rc1-ajh +# Thu Oct 28 20:19:01 2004 # CONFIG_X86=y CONFIG_MMU=y CONFIG_UID16=y CONFIG_GENERIC_ISA_DMA=y +CONFIG_GENERIC_IOMAP=y # # Code maturity level options @@ -13,10 +16,12 @@ # CONFIG_CLEAN_COMPILE is not set CONFIG_BROKEN=y CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y # # General setup # +CONFIG_LOCALVERSION="" CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y @@ -26,17 +31,20 @@ # CONFIG_AUDIT is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_HOTPLUG=y +CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_FUTEX=y CONFIG_EPOLL=y -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set # # Loadable module support @@ -46,6 +54,7 @@ # CONFIG_MODULE_FORCE_UNLOAD is not set CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y # @@ -74,6 +83,7 @@ # CONFIG_MK7 is not set # CONFIG_MK8 is not set # CONFIG_MCRUSOE is not set +# CONFIG_MEFFICEON is not set # CONFIG_MWINCHIPC6 is not set # CONFIG_MWINCHIP2 is not set # CONFIG_MWINCHIP3D is not set @@ -127,7 +137,7 @@ # ACPI (Advanced Configuration and Power Interface) Support # # CONFIG_ACPI is not set -CONFIG_ACPI_BOOT=y +CONFIG_ACPI_BLACKLIST_YEAR=0 # # CPU Frequency scaling @@ -144,7 +154,6 @@ CONFIG_PCI_GOANY=y CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y -CONFIG_PCI_MMCONFIG=y # CONFIG_PCI_LEGACY_PROC is not set CONFIG_PCI_NAMES=y CONFIG_ISA=y @@ -153,9 +162,13 @@ # CONFIG_SCx200 is not set # -# PCMCIA/CardBus support +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PC-card bridges # -# CONFIG_PCMCIA is not set CONFIG_PCMCIA_PROBE=y # @@ -227,7 +240,17 @@ # CONFIG_BLK_DEV_SX8 is not set CONFIG_BLK_DEV_RAM=m CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_INITRAMFS_SOURCE="" # CONFIG_LBD is not set +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y # # ATA/ATAPI/MFM/RLL support @@ -246,7 +269,6 @@ # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_IDE_TASK_IOCTL is not set -CONFIG_IDE_TASKFILE_IO=y # # IDE chipset support/bugfixes @@ -264,7 +286,6 @@ # CONFIG_BLK_DEV_IDEDMA_FORCED is not set CONFIG_IDEDMA_PCI_AUTO=y # CONFIG_IDEDMA_ONLYDISK is not set -CONFIG_BLK_DEV_ADMA=y # CONFIG_BLK_DEV_AEC62XX is not set CONFIG_BLK_DEV_ALI15X3=y # CONFIG_WDC_ALI15X3 is not set @@ -349,17 +370,13 @@ CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m +CONFIG_INET_TUNNEL=m # # IP: Virtual Server Configuration # # CONFIG_IP_VS is not set -CONFIG_IPV6=m -CONFIG_IPV6_PRIVACY=y -CONFIG_INET6_AH=m -CONFIG_INET6_ESP=m -CONFIG_INET6_IPCOMP=m -CONFIG_IPV6_TUNNEL=m +# CONFIG_IPV6 is not set CONFIG_NETFILTER=y CONFIG_NETFILTER_DEBUG=y @@ -367,6 +384,9 @@ # IP: Netfilter Configuration # CONFIG_IP_NF_CONNTRACK=m +# CONFIG_IP_NF_CT_ACCT is not set +# CONFIG_IP_NF_CONNTRACK_MARK is not set +# CONFIG_IP_NF_CT_PROTO_SCTP is not set CONFIG_IP_NF_FTP=m CONFIG_IP_NF_IRC=m CONFIG_IP_NF_TFTP=m @@ -391,8 +411,16 @@ CONFIG_IP_NF_MATCH_STATE=m CONFIG_IP_NF_MATCH_CONNTRACK=m CONFIG_IP_NF_MATCH_OWNER=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m +CONFIG_IP_NF_MATCH_REALM=m +# CONFIG_IP_NF_MATCH_SCTP is not set +CONFIG_IP_NF_MATCH_COMMENT=m +# CONFIG_IP_NF_MATCH_HASHLIMIT is not set CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_IP_NF_TARGET_TCPMSS=m CONFIG_IP_NF_NAT=m CONFIG_IP_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m @@ -411,23 +439,12 @@ CONFIG_IP_NF_TARGET_DSCP=m CONFIG_IP_NF_TARGET_MARK=m CONFIG_IP_NF_TARGET_CLASSIFY=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m +# CONFIG_IP_NF_RAW is not set CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m # CONFIG_IP_NF_COMPAT_IPCHAINS is not set # CONFIG_IP_NF_COMPAT_IPFWADM is not set -# CONFIG_IP_NF_RAW is not set -CONFIG_IP_NF_MATCH_ADDRTYPE=m -CONFIG_IP_NF_MATCH_REALM=m - -# -# IPv6: Netfilter Configuration -# -# CONFIG_IP6_NF_QUEUE is not set -# CONFIG_IP6_NF_IPTABLES is not set CONFIG_XFRM=y CONFIG_XFRM_USER=m @@ -447,7 +464,6 @@ # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set -# CONFIG_NET_HW_FLOWCONTROL is not set # # QoS and/or fair queueing @@ -522,7 +538,6 @@ # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set -# CONFIG_VIA_VELOCITY is not set # CONFIG_NET_POCKET is not set # @@ -536,6 +551,7 @@ # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set # CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # @@ -563,7 +579,7 @@ # CONFIG_PLIP is not set CONFIG_PPP=m # CONFIG_PPP_MULTILINK is not set -# CONFIG_PPP_FILTER is not set +CONFIG_PPP_FILTER=y CONFIG_PPP_ASYNC=m # CONFIG_PPP_SYNC_TTY is not set CONFIG_PPP_DEFLATE=m @@ -611,6 +627,7 @@ # CONFIG_SERIO_CT82C710 is not set # CONFIG_SERIO_PARKBD is not set # CONFIG_SERIO_PCIPS2 is not set +# CONFIG_SERIO_RAW is not set # # Input Device Drivers @@ -657,7 +674,6 @@ # CONFIG_PRINTER is not set # CONFIG_PPDEV is not set # CONFIG_TIPAR is not set -# CONFIG_QIC02_TAPE is not set # # IPMI @@ -797,6 +813,7 @@ # # CONFIG_SND_ALI5451 is not set # CONFIG_SND_ATIIXP is not set +# CONFIG_SND_ATIIXP_MODEM is not set # CONFIG_SND_AU8810 is not set # CONFIG_SND_AU8820 is not set # CONFIG_SND_AU8830 is not set @@ -839,6 +856,8 @@ # USB support # # CONFIG_USB is not set +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y # # USB Gadget Support @@ -876,7 +895,8 @@ CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_ZISOFS_FS=m -# CONFIG_UDF_FS is not set +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y # # DOS/FAT/NT Filesystems @@ -896,6 +916,7 @@ # CONFIG_DEVFS_FS is not set # CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y +# CONFIG_TMPFS_XATTR is not set # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y @@ -934,6 +955,7 @@ CONFIG_SUNRPC=m CONFIG_SUNRPC_GSS=m CONFIG_RPCSEC_GSS_KRB5=m +# CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set @@ -999,14 +1021,14 @@ # Kernel hacking # # CONFIG_DEBUG_KERNEL is not set -CONFIG_EARLY_PRINTK=y -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_FRAME_POINTER is not set +CONFIG_EARLY_PRINTK=y CONFIG_4KSTACKS=y # # Security options # +# CONFIG_KEYS is not set # CONFIG_SECURITY is not set # @@ -1020,6 +1042,7 @@ CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_DES=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_TWOFISH=m @@ -1043,5 +1066,7 @@ CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=m CONFIG_ZLIB_DEFLATE=m +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y CONFIG_X86_BIOS_REBOOT=y CONFIG_PC=y Art Haas -- Man once surrendering his reason, has no remaining guard against absurdities the most monstrous, and like a ship without rudder, is the sport of every wind. -Thomas Jefferson to James Smith, 1822 ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2004-11-09 1:58 UTC | newest] Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2004-11-07 5:02 Kernel memory requirements and BK Chuck Ebbert 2004-11-09 1:52 ` Kernel memory requirements and BK [SOLVED] Art Haas -- strict thread matches above, loose matches on Subject: below -- 2004-11-05 14:46 Kernel memory requirements and BK Art Haas 2004-11-05 14:55 ` Grzegorz Kulewski 2004-11-05 15:28 ` Art Haas
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®