* Re: ZyXEL GN650-T
2004-11-07 22:48 ` Francois Romieu
@ 2004-11-09 0:00 ` Francois Romieu
2004-11-09 23:25 ` Francois Romieu
0 siblings, 1 reply; 9+ messages in thread
From: Francois Romieu @ 2004-11-09 0:00 UTC (permalink / raw)
To: seby; +Cc: linux-kernel, netdev, alan, jgarzik
seby@focomunicatii.ro <seby@focomunicatii.ro> :
[...]
> I just bouth a zyxel GN650T network card .. and it sems that vlan's don't
> work on this card .. anybody had this problems with this card ..
Patch below against 2.6.10-rc1-bk15 + Jeff's netdev should convert the driver
to the in-kernel vlan API.
I'd be surprized it does from the first try though.
Please keep netdev CCed.
diff -puN drivers/net/via-velocity.c~via-velocity-300 drivers/net/via-velocity.c
--- linux-2.6.10-rc1/drivers/net/via-velocity.c~via-velocity-300 2004-11-08 00:59:23.000000000 +0100
+++ linux-2.6.10-rc1-fr/drivers/net/via-velocity.c 2004-11-09 00:56:08.000000000 +0100
@@ -73,6 +73,7 @@
#include <linux/reboot.h>
#include <linux/ethtool.h>
#include <linux/mii.h>
+#include <linux/if_vlan.h>
#include <linux/in.h>
#include <linux/if_arp.h>
#include <linux/ip.h>
@@ -114,15 +115,6 @@ VELOCITY_PARAM(RxDescriptors, "Number of
#define TX_DESC_DEF 64
VELOCITY_PARAM(TxDescriptors, "Number of transmit descriptors");
-#define VLAN_ID_MIN 0
-#define VLAN_ID_MAX 4095
-#define VLAN_ID_DEF 0
-/* VID_setting[] is used for setting the VID of NIC.
- 0: default VID.
- 1-4094: other VIDs.
-*/
-VELOCITY_PARAM(VID_setting, "802.1Q VLAN ID");
-
#define RX_THRESH_MIN 0
#define RX_THRESH_MAX 3
#define RX_THRESH_DEF 0
@@ -150,13 +142,6 @@ VELOCITY_PARAM(rx_thresh, "Receive fifo
*/
VELOCITY_PARAM(DMA_length, "DMA length");
-#define TAGGING_DEF 0
-/* enable_tagging[] is used for enabling 802.1Q VID tagging.
- 0: disable VID seeting(default).
- 1: enable VID setting.
-*/
-VELOCITY_PARAM(enable_tagging, "Enable 802.1Q tagging");
-
#define IP_ALIG_DEF 0
/* IP_byte_align[] is used for IP header DWORD byte aligned
0: indicate the IP header won't be DWORD byte aligned.(Default) .
@@ -275,6 +260,130 @@ static struct notifier_block velocity_in
static spinlock_t velocity_dev_list_lock = SPIN_LOCK_UNLOCKED;
static LIST_HEAD(velocity_dev_list);
+#ifdef CONFIG_VIA_VELOCITY_VLAN
+
+static inline u16 velocity_tx_vlan_tag(struct velocity_info *vptr,
+ struct sk_buff *skb)
+{
+ return (vptr->vlgrp && vlan_tx_tag_present(skb)) ?
+ vlan_tx_tag_get(skb) : 0x00;
+}
+
+static void velocity_vlan_rx_register(struct net_device *dev,
+ struct vlan_group *grp)
+{
+ struct velocity_info *vptr = netdev_priv(dev);
+ struct mac_regs __iomem *regs = vptr->mac_regs;
+ unsigned long flags;
+
+ spin_lock_irqsave(&vptr->lock, flags);
+ vptr->vlgrp = grp;
+ if (vptr->vlgrp)
+ WORD_REG_BITS_ON(MCFG_RTGOPT, ®s->MCFG);
+ else
+ WORD_REG_BITS_OFF(MCFG_RTGOPT, ®s->MCFG);
+ spin_unlock_irqrestore(&vptr->lock, flags);
+}
+
+static void velocity_vlan_rx_add_vid(struct net_device *dev, unsigned short vid)
+{
+ struct velocity_info *vptr = netdev_priv(dev);
+ struct mac_regs __iomem *regs = vptr->mac_regs;
+ unsigned long flags;
+ u16 slot;
+
+ spin_lock_irqsave(&vptr->lock, flags);
+
+ for (slot = 0; slot < VCAM_SIZE; slot++) {
+ u8 bit = vptr->mCAMmask[slot / 8] & (1 << (slot & 7));
+
+ if (!bit)
+ break;
+ }
+
+ if (slot == VCAM_SIZE) {
+ printk(KERN_ERR "%s: no free hardware filter for VLAN %04d\n",
+ dev->name, vid);
+ goto out_unlock;
+ }
+
+ vptr->mCAMmask[slot / 8] |= 1 << (slot & 7);
+
+ mac_set_cam(regs, slot, (u8 *) &vid, VELOCITY_VLAN_ID_CAM);
+ mac_set_cam_mask(regs, vptr->vCAMmask, VELOCITY_VLAN_ID_CAM);
+
+out_unlock:
+ spin_unlock_irqrestore(&vptr->lock, flags);
+}
+
+static void velocity_vlan_rx_kill_vid(struct net_device *dev,
+ unsigned short vid)
+{
+ struct velocity_info *vptr = netdev_priv(dev);
+ struct mac_regs __iomem *regs = vptr->mac_regs;
+ unsigned long flags;
+ u16 slot, hw_vid;
+
+ spin_lock_irqsave(&vptr->lock, flags);
+ if (!vptr->vlgrp)
+ goto out_unlock;
+
+ vptr->vlgrp->vlan_devices[vid] = NULL;
+
+ for (slot = 0; slot < VCAM_SIZE; slot++) {
+ u8 bit = vptr->mCAMmask[slot / 8] & (1 << (slot & 7));
+
+ if (!bit)
+ continue;
+ mac_get_cam(regs, slot, (u8 *) &hw_vid, VELOCITY_VLAN_ID_CAM);
+ if (hw_vid == vid)
+ break;
+ }
+
+ if (slot == VCAM_SIZE) {
+ printk(KERN_ERR "%s: no hardware filter found for VLAN %04d\n",
+ dev->name, vid);
+ goto out_unlock;
+ }
+
+ vptr->mCAMmask[slot / 8] &= ~(1 << (slot & 7));
+ mac_set_cam_mask(regs, vptr->vCAMmask, VELOCITY_VLAN_ID_CAM);
+
+out_unlock:
+ spin_unlock_irqrestore(&vptr->lock, flags);
+}
+
+static int velocity_rx_vlan_skb(struct velocity_info *vptr, struct rx_desc *rd,
+ struct sk_buff *skb)
+{
+ int ret;
+
+ if (vptr->vlgrp && (rd->rdesc0.RSR & RSR_VTAG)) {
+ u16 vlan_tag = rd->rdesc1.u.pqinf.VID;
+
+ /* FIXME: should be NAPI dependant */
+ vlan_hwaccel_receive_skb(skb, vptr->vlgrp, vlan_tag);
+ ret = 0;
+ } else
+ ret = -1;
+ return ret;
+}
+
+#else
+
+static inline u16 velocity_tx_vlan_tag(struct velocity_info *vptr,
+ struct sk_buff *skb)
+{
+ return 0;
+}
+
+static int velocity_rx_vlan_skb(struct velocity_info *vptr, struct sk_buff *skb)
+{
+ return -1;
+}
+
+#endif
+
static void velocity_register_notifier(void)
{
register_inetaddr_notifier(&velocity_inetaddr_notifier);
@@ -440,8 +549,6 @@ static void __devinit velocity_get_optio
velocity_set_int_opt(&opts->DMA_length, DMA_length[index], DMA_LENGTH_MIN, DMA_LENGTH_MAX, DMA_LENGTH_DEF, "DMA_length", devname);
velocity_set_int_opt(&opts->numrx, RxDescriptors[index], RX_DESC_MIN, RX_DESC_MAX, RX_DESC_DEF, "RxDescriptors", devname);
velocity_set_int_opt(&opts->numtx, TxDescriptors[index], TX_DESC_MIN, TX_DESC_MAX, TX_DESC_DEF, "TxDescriptors", devname);
- velocity_set_int_opt(&opts->vid, VID_setting[index], VLAN_ID_MIN, VLAN_ID_MAX, VLAN_ID_DEF, "VID_setting", devname);
- velocity_set_bool_opt(&opts->flags, enable_tagging[index], TAGGING_DEF, VELOCITY_FLAGS_TAGGING, "enable_tagging", devname);
velocity_set_bool_opt(&opts->flags, txcsum_offload[index], TX_CSUM_DEF, VELOCITY_FLAGS_TX_CSUM, "txcsum_offload", devname);
velocity_set_int_opt(&opts->flow_cntl, flow_control[index], FLOW_CNTL_MIN, FLOW_CNTL_MAX, FLOW_CNTL_DEF, "flow_control", devname);
velocity_set_bool_opt(&opts->flags, IP_byte_align[index], IP_ALIG_DEF, VELOCITY_FLAGS_IP_ALIGN, "IP_byte_align", devname);
@@ -463,6 +570,7 @@ static void __devinit velocity_get_optio
static void velocity_init_cam_filter(struct velocity_info *vptr)
{
struct mac_regs __iomem * regs = vptr->mac_regs;
+ u16 temp = 0;
/* Turn on MCFG_PQEN, turn off MCFG_RTGOPT */
WORD_REG_BITS_SET(MCFG_PQEN, MCFG_RTGOPT, ®s->MCFG);
@@ -475,21 +583,9 @@ static void velocity_init_cam_filter(str
mac_set_cam_mask(regs, vptr->mCAMmask, VELOCITY_MULTICAST_CAM);
/* Enable first VCAM */
- if (vptr->flags & VELOCITY_FLAGS_TAGGING) {
- /* If Tagging option is enabled and VLAN ID is not zero, then
- turn on MCFG_RTGOPT also */
- if (vptr->options.vid != 0)
- WORD_REG_BITS_ON(MCFG_RTGOPT, ®s->MCFG);
-
- mac_set_cam(regs, 0, (u8 *) & (vptr->options.vid), VELOCITY_VLAN_ID_CAM);
- vptr->vCAMmask[0] |= 1;
- mac_set_cam_mask(regs, vptr->vCAMmask, VELOCITY_VLAN_ID_CAM);
- } else {
- u16 temp = 0;
- mac_set_cam(regs, 0, (u8 *) &temp, VELOCITY_VLAN_ID_CAM);
- temp = 1;
- mac_set_cam_mask(regs, (u8 *) &temp, VELOCITY_VLAN_ID_CAM);
- }
+ mac_set_cam(regs, 0, (u8 *) &temp, VELOCITY_VLAN_ID_CAM);
+ temp++;
+ mac_set_cam_mask(regs, (u8 *) &temp, VELOCITY_VLAN_ID_CAM);
}
/**
@@ -791,6 +887,13 @@ static int __devinit velocity_found1(str
dev->features |= NETIF_F_SG;
#endif
+#ifdef CONFIG_VIA_VELOCITY_VLAN
+ dev->vlan_rx_register = velocity_vlan_rx_register;
+ dev->vlan_rx_kill_vid = velocity_vlan_rx_kill_vid;
+ dev->vlan_rx_add_vid = velocity_vlan_rx_add_vid;
+ dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
+#endif
+
if (vptr->flags & VELOCITY_FLAGS_TX_CSUM) {
dev->features |= NETIF_F_HW_CSUM;
}
@@ -1427,7 +1530,8 @@ static int velocity_receive_frame(struct
skb->protocol = eth_type_trans(skb, skb->dev);
stats->rx_bytes += pkt_len;
- netif_rx(skb);
+ if (velocity_rx_vlan_skb(vptr, rd, skb) < 0)
+ netif_rx(skb);
return 0;
}
@@ -1985,12 +2089,10 @@ static int velocity_xmit(struct sk_buff
td_ptr->tdesc1.CMDZ = 2;
}
- if (vptr->flags & VELOCITY_FLAGS_TAGGING) {
- td_ptr->tdesc1.pqinf.VID = (vptr->options.vid & 0xfff);
- td_ptr->tdesc1.pqinf.priority = 0;
- td_ptr->tdesc1.pqinf.CFI = 0;
- td_ptr->tdesc1.TCR |= TCR0_VETAG;
- }
+ td_ptr->tdesc1.u.pqinf.VID = velocity_tx_vlan_tag(vptr, skb);
+ td_ptr->tdesc1.u.pqinf.CFI = 0;
+ td_ptr->tdesc1.u.pqinf.priority = 0;
+ td_ptr->tdesc1.TCR |= vlan_tx_tag_present(skb) ? TCR0_VETAG : 0x00;
/*
* Handle hardware checksum
diff -puN drivers/net/via-velocity.h~via-velocity-300 drivers/net/via-velocity.h
--- linux-2.6.10-rc1/drivers/net/via-velocity.h~via-velocity-300 2004-11-08 00:59:23.000000000 +0100
+++ linux-2.6.10-rc1-fr/drivers/net/via-velocity.h 2004-11-09 00:57:13.000000000 +0100
@@ -201,8 +201,17 @@ struct rdesc0 {
u16 owner:1; /* Who owns this buffer ? */
};
+struct pqinf { /* Priority queue info */
+ u16 VID:12;
+ u16 CFI:1;
+ u16 priority:3;
+} __attribute__ ((__packed__));
+
struct rdesc1 {
- u16 PQTAG;
+ union {
+ u16 vlan_tag;
+ struct pqinf pqinf;
+ } u;
u8 CSM;
u8 IPKT;
};
@@ -227,14 +236,11 @@ struct tdesc0 {
u16 owner:1; /* Who owns the buffer */
};
-struct pqinf { /* Priority queue info */
- u16 VID:12;
- u16 CFI:1;
- u16 priority:3;
-} __attribute__ ((__packed__));
-
struct tdesc1 {
- struct pqinf pqinf;
+ union {
+ u16 vlan_tag;
+ struct pqinf pqinf;
+ } u;
u8 TCR;
u8 TCPLS:2;
u8 reserved:2;
@@ -1796,7 +1802,9 @@ struct velocity_info {
u32 ticks;
u32 rx_bytes;
-
+#ifdef CONFIG_VIA_VELOCITY_VLAN
+ struct vlan_group *vlgrp;
+#endif
};
/**
diff -puN drivers/net/Kconfig~via-velocity-300 drivers/net/Kconfig
--- linux-2.6.10-rc1/drivers/net/Kconfig~via-velocity-300 2004-11-08 00:59:23.000000000 +0100
+++ linux-2.6.10-rc1-fr/drivers/net/Kconfig 2004-11-08 01:00:20.000000000 +0100
@@ -2070,6 +2070,15 @@ config VIA_VELOCITY
To compile this driver as a module, choose M here. The module
will be called via-velocity.
+config VIA_VELOCITY_VLAN
+ bool "VLAN support"
+ depends on VIA_VELOCITY && VLAN_8021Q
+ ---help---
+ Say Y here for the via-velocity driver to support the functions
+ required by the kernel 802.1Q code.
+
+ If in doubt, say Y.
+
config TIGON3
tristate "Broadcom Tigon3 support"
depends on PCI
_
^ permalink raw reply [flat|nested] 9+ messages in thread