Re: [ACPI] Re: [PATCH] smsc-ircc2: Add PnP support.

["Ville Syrjälä" <syrjala@sci.fi>]

On Sat, Nov 20, 2004 at 01:09:36AM +0200, Meelis Roos wrote:
> 
> I tried it with pnpbios (acpi=off) and it started to work after auto and 
> activate (but not with auto alone):
> 
> nartsiss:/# modprobe smsc-ircc2
> found SMC SuperIO Chip (devid=0x5a rev=00 base=0x002e): LPC47N227
> smsc_superio_flat(): IrDA not enabled
> smsc_superio_flat(): fir: 0x00, sir: 0x00, dma: 15, irq: 0, mode: 0x02
> FATAL: Error inserting smsc_ircc2 
> (/lib/modules/2.6.10-rc2/kernel/drivers/net/irda/smsc-ircc2.ko): No such 
> device
> nartsiss:/# echo activate > resources
> pnp: Device 00:0f activated.
> nartsiss:/# modprobe smsc-ircc2
> found SMC SuperIO Chip (devid=0x5a rev=00 base=0x002e): LPC47N227
> smsc_superio_flat(): fir: 0x2e8, sir: 0x100, dma: 03, irq: 5, mode: 0x0e
> SMsC IrDA Controller found
>  IrCC version 2.0, firport 0x2e8, sirport 0x100 dma=3, irq=5
> No transceiver found. Defaulting to Fast pin select
> IrDA: Registered device irda0

It is using the legacy probe instead of the pnp probe. Did you actually 
apply the pnp patch?

I'm not entirely sure what has been discussed since somebody removed 
me from the CC list...

-- 
Ville Syrjälä
syrjala@sci.fi
http://www.sci.fi/~syrjala/