mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
* Tyan Thunder K7X Pro Ethernet Card
@ 2005-01-03 11:44 Antonio de Candia
  2005-01-07 18:39 ` Denis Vlasenko
  0 siblings, 1 reply; 2+ messages in thread
From: Antonio de Candia @ 2005-01-03 11:44 UTC (permalink / raw)
  To: linux-kernel

Hallo,

I have an APPRO node with Tyan Thunder K7X Pro (S2469)
motherboard.
It has two onboard Ethernet controllers, 
    - Intel® 82545EM 10/100/1000Mbps controller
    - Intel® 82551QM 10/100Mbps controller
(as stated on www.tyan.de)
I installed Linux Slackware 10.0, and used the modules
e1000 and e100 for the two ethernet cards...
The first eth0 works well with the e1000 driver, but 
eth1 with e100 does not work... if I scp a big file,
after transmitting some megabytes it hangs (scp says
"-- stalled --")
The same happens with http transfers...
I tried also with eepro100 driver, but nothing changes...

Thank you very much for any help

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2005-01-07 18:39 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2005-01-03 11:44 Tyan Thunder K7X Pro Ethernet Card Antonio de Candia
2005-01-07 18:39 ` Denis Vlasenko

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®