2.6.11-rc[23]: swsusp & usb regression

mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed

* 2.6.11-rc[23]: swsusp & usb regression
@ 2005-02-04 23:16 Pavel Machek
  2005-02-04 23:23 ` Pavel Machek
                   ` (2 more replies)
  0 siblings, 3 replies; 8+ messages in thread
From: Pavel Machek @ 2005-02-04 23:16 UTC (permalink / raw)
  To: kernel list, greg, linux-usb-devel

Hi!

In 2.6.11-rc[23], I get problems after swsusp resume:

Feb  4 23:54:39 amd kernel: Restarting tasks...<3>hub 3-0:1.0:
over-current change on port 1
Feb  4 23:54:39 amd kernel:  done
Feb  4 23:54:39 amd kernel: hub 3-0:1.0: connect-debounce failed, port
1 disabled
Feb  4 23:54:39 amd kernel: hub 3-0:1.0: over-current change on port 2
Feb  4 23:54:39 amd kernel: usb 3-2: USB disconnect, address 2

After unplugging usb bluetooth key, machine hung. Sysrq still
responded with help but I could not get any usefull output.

Parts of .config:
# CONFIG_USB_IRDA is not set
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_MIDI is not set
CONFIG_USB_ACM=y
CONFIG_USB_PRINTER=y
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_RW_DETECT is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_HP8200e is not set
CONFIG_USB_STORAGE_SDDR09=y
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
CONFIG_USB_HID=y

								Pavel
-- 
People were complaining that M$ turns users into beta-testers...
...jr ghea gurz vagb qrirybcref, naq gurl frrz gb yvxr vg gung jnl!

^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: 2.6.11-rc[23]: swsusp & usb regression
  2005-02-04 23:16 2.6.11-rc[23]: swsusp & usb regression Pavel Machek
@ 2005-02-04 23:23 ` Pavel Machek
  2005-02-05 15:19 ` [linux-usb-devel] " Alan Stern
  2005-02-06  1:59 ` Alan Stern
  2 siblings, 0 replies; 8+ messages in thread
From: Pavel Machek @ 2005-02-04 23:23 UTC (permalink / raw)
  To: kernel list, greg, linux-usb-devel

Hi!

> In 2.6.11-rc[23], I get problems after swsusp resume:
> 
> Feb  4 23:54:39 amd kernel: Restarting tasks...<3>hub 3-0:1.0:
> over-current change on port 1
> Feb  4 23:54:39 amd kernel:  done
> Feb  4 23:54:39 amd kernel: hub 3-0:1.0: connect-debounce failed, port
> 1 disabled
> Feb  4 23:54:39 amd kernel: hub 3-0:1.0: over-current change on port 2
> Feb  4 23:54:39 amd kernel: usb 3-2: USB disconnect, address 2
> 
> After unplugging usb bluetooth key, machine hung. Sysrq still
> responded with help but I could not get any usefull output.

I tried deselecting CONFIG_USB_EHCI_HCD, and got repeating stream of

Feb  5 00:21:17 amd kernel: Restarting tasks... done
Feb  5 00:21:17 amd kernel: hub 3-0:1.0: over-current change on port 1
Feb  5 00:21:18 amd kernel: hub 3-0:1.0: connect-debounce failed, port
1 disabled
Feb  5 00:21:18 amd kernel: hub 3-0:1.0: over-current change on port 2
Feb  5 00:21:20 amd kernel: hub 3-0:1.0: connect-debounce failed, port
2 disabled
Feb  5 00:21:20 amd kernel: hub 1-0:1.0: over-current change on port 1
Feb  5 00:21:21 amd kernel: hub 1-0:1.0: connect-debounce failed, port
1 disabled
Feb  5 00:21:21 amd kernel: hub 1-0:1.0: over-current change on port 2
Feb  5 00:21:23 amd kernel: hub 1-0:1.0: connect-debounce failed, port
2 disabled
Feb  5 00:21:23 amd kernel: hub 2-0:1.0: over-current change on port 1
Feb  5 00:21:24 amd kernel: hub 2-0:1.0: connect-debounce failed, port
1 disabled
Feb  5 00:21:24 amd kernel: hub 2-0:1.0: over-current change on port 2
Feb  5 00:21:24 amd kernel: usb 2-2: USB disconnect, address 2
Feb  5 00:21:26 amd kernel: hub 2-0:1.0: connect-debounce failed, port
2 disabled
Feb  5 00:21:26 amd kernel: hub 3-0:1.0: over-current change on port 1
Feb  5 00:21:28 amd kernel: hub 3-0:1.0: connect-debounce failed, port
1 disabled
Feb  5 00:21:28 amd kernel: hub 3-0:1.0: over-current change on port 2
Feb  5 00:21:29 amd kernel: hub 3-0:1.0: connect-debounce failed, port
2 disabled
Feb  5 00:21:29 amd kernel: hub 1-0:1.0: over-current change on port 1
Feb  5 00:21:31 amd kernel: hub 1-0:1.0: connect-debounce failed, port
1 disabled
Feb  5 00:21:31 amd kernel: hub 1-0:1.0: over-current change on port 2
Feb  5 00:21:32 amd kernel: hub 1-0:1.0: connect-debounce failed, port
2 disabled
Feb  5 00:21:32 amd kernel: hub 2-0:1.0: over-current change on port 1
Feb  5 00:21:34 amd kernel: hub 2-0:1.0: connect-debounce failed, port
1 disabled
Feb  5 00:21:34 amd kernel: hub 2-0:1.0: over-current change on port 2
Feb  5 00:21:35 amd kernel: hub 2-0:1.0: connect-debounce failed, port
2 disabled
Feb  5 00:21:35 amd kernel: hub 3-0:1.0: over-current change on port 1


...in syslog.

-- 
People were complaining that M$ turns users into beta-testers...
...jr ghea gurz vagb qrirybcref, naq gurl frrz gb yvxr vg gung jnl!

^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [linux-usb-devel] 2.6.11-rc[23]: swsusp & usb regression
  2005-02-04 23:16 2.6.11-rc[23]: swsusp & usb regression Pavel Machek
  2005-02-04 23:23 ` Pavel Machek
@ 2005-02-05 15:19 ` Alan Stern
  2005-02-05 23:14   ` Pavel Machek
  2005-02-06  1:59 ` Alan Stern
  2 siblings, 1 reply; 8+ messages in thread
From: Alan Stern @ 2005-02-05 15:19 UTC (permalink / raw)
  To: Pavel Machek; +Cc: kernel list, Greg KH, USB development list

On Sat, 5 Feb 2005, Pavel Machek wrote:

> Hi!
> 
> In 2.6.11-rc[23], I get problems after swsusp resume:
> 
> Feb  4 23:54:39 amd kernel: Restarting tasks...<3>hub 3-0:1.0:
> over-current change on port 1
> Feb  4 23:54:39 amd kernel:  done
> Feb  4 23:54:39 amd kernel: hub 3-0:1.0: connect-debounce failed, port
> 1 disabled
> Feb  4 23:54:39 amd kernel: hub 3-0:1.0: over-current change on port 2
> Feb  4 23:54:39 amd kernel: usb 3-2: USB disconnect, address 2
> 
> After unplugging usb bluetooth key, machine hung. Sysrq still
> responded with help but I could not get any usefull output.

Your logs don't indicate which host controller driver is bound to each of 
your hubs.  /proc/bus/usb/devices will contain that information.  Without 
it, it's hard to diagnose what happened.

At the moment usbcore is undergoing a lengthy, and not terribly rapid,
series of changes to the generic bus glue layer, as are the host
controller drivers themselves.  Part of this change will involve the way
suspend/resume is handled.  (Not to the mention the fact that the power
management core itself is in the midst of change!)

As the uhci-hcd maintainer, I can safely say that the suspend/resume 
support in that driver is badly out of date.  Fixing it up is one of the 
ingredients planned for this series of changes.

As things stand now, however, there's likely to be lots of problems in the 
coordination of suspend/resume activities among the HCDs, the glue layer, 
and the hub driver.  One thing you could try is to turn on 
CONFIG_USB_SUSPEND.  It's likely to change things, although not 
necessarily for the better.  :-)

Alan Stern

^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [linux-usb-devel] 2.6.11-rc[23]: swsusp & usb regression
  2005-02-05 15:19 ` [linux-usb-devel] " Alan Stern
@ 2005-02-05 23:14   ` Pavel Machek
  2005-02-06  0:08     ` David Brownell
  0 siblings, 1 reply; 8+ messages in thread
From: Pavel Machek @ 2005-02-05 23:14 UTC (permalink / raw)
  To: Alan Stern; +Cc: kernel list, Greg KH, USB development list

Hi!

> > In 2.6.11-rc[23], I get problems after swsusp resume:
> > 
> > Feb  4 23:54:39 amd kernel: Restarting tasks...<3>hub 3-0:1.0:
> > over-current change on port 1
> > Feb  4 23:54:39 amd kernel:  done
> > Feb  4 23:54:39 amd kernel: hub 3-0:1.0: connect-debounce failed, port
> > 1 disabled
> > Feb  4 23:54:39 amd kernel: hub 3-0:1.0: over-current change on port 2
> > Feb  4 23:54:39 amd kernel: usb 3-2: USB disconnect, address 2
> > 
> > After unplugging usb bluetooth key, machine hung. Sysrq still
> > responded with help but I could not get any usefull output.
> 
> Your logs don't indicate which host controller driver is bound to each of 
> your hubs.  /proc/bus/usb/devices will contain that information.  Without 
> it, it's hard to diagnose what happened.

I do not think I have any hubs... no external hubs anyway. And I do
not have /proc/bus/usb/devices file :-(. There's something in
/sys/bus/usb/devices/.

> As things stand now, however, there's likely to be lots of problems in the 
> coordination of suspend/resume activities among the HCDs, the glue layer, 
> and the hub driver.  One thing you could try is to turn on 
> CONFIG_USB_SUSPEND.  It's likely to change things, although not 
> necessarily for the better.  :-)

:-).
								Pavel
-- 
People were complaining that M$ turns users into beta-testers...
...jr ghea gurz vagb qrirybcref, naq gurl frrz gb yvxr vg gung jnl!

^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [linux-usb-devel] 2.6.11-rc[23]: swsusp & usb regression
  2005-02-05 23:14   ` Pavel Machek
@ 2005-02-06  0:08     ` David Brownell
  2005-02-06  0:26       ` Pavel Machek
  0 siblings, 1 reply; 8+ messages in thread
From: David Brownell @ 2005-02-06  0:08 UTC (permalink / raw)
  To: linux-usb-devel; +Cc: Pavel Machek, Alan Stern, kernel list, Greg KH

On Saturday 05 February 2005 3:14 pm, Pavel Machek wrote:
> Hi!
> 
> > Your logs don't indicate which host controller driver is bound to each of 
> > your hubs.  /proc/bus/usb/devices will contain that information.  Without 
> > it, it's hard to diagnose what happened.
> 
> I do not think I have any hubs... no external hubs anyway. And I do
> not have /proc/bus/usb/devices file :-(. There's something in
> /sys/bus/usb/devices/.

So what does "lspci -v|grep HCI" say then?

You could try "mount -t usbfs on /proc/bus/usb" ... ;)

Periodically I think that it'd be useful to have the hub driver messages
report the HCD involved, somehow, instead of just "hub", at least when
root hub ports are involved.  It could improve the utility of some bug
reports by a significant amount.

- Dave

^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [linux-usb-devel] 2.6.11-rc[23]: swsusp & usb regression
  2005-02-06  0:08     ` David Brownell
@ 2005-02-06  0:26       ` Pavel Machek
  0 siblings, 0 replies; 8+ messages in thread
From: Pavel Machek @ 2005-02-06  0:26 UTC (permalink / raw)
  To: David Brownell; +Cc: linux-usb-devel, Alan Stern, kernel list, Greg KH

Hi!

> > > Your logs don't indicate which host controller driver is bound to each of 
> > > your hubs.  /proc/bus/usb/devices will contain that information.  Without 
> > > it, it's hard to diagnose what happened.
> > 
> > I do not think I have any hubs... no external hubs anyway. And I do
> > not have /proc/bus/usb/devices file :-(. There's something in
> > /sys/bus/usb/devices/.
> 
> So what does "lspci -v|grep HCI" say then?

0000:00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) (prog-if 00 [UHCI])
0000:00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) (prog-if 00 [UHCI])
0000:00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) (prog-if 00 [UHCI])
0000:00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82) (prog-if 20 [EHCI])
0000:00:13.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80) (prog-if 10 [OHCI])

> You could try "mount -t usbfs on /proc/bus/usb" ... ;)

T:  Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.11-rc3 uhci_hcd
S:  Product=VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#3)
S:  SerialNumber=0000:00:10.2
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms

T:  Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc= 23/900 us ( 3%), #Int=  1, #Iso=  0
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.11-rc3 uhci_hcd
S:  Product=VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)
S:  SerialNumber=0000:00:10.1
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms

T:  Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=e0(unk. ) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0db0 ProdID=1967 Rev= 5.25
C:* #Ifs= 3 Cfg#= 1 Atr=80 MxPwr=250mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:  If#= 1 Alt= 0 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
I:  If#= 2 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=00 Driver=(none)

T:  Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.11-rc3 uhci_hcd
S:  Product=VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
S:  SerialNumber=0000:00:10.0
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms

T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480 MxCh= 6
B:  Alloc=  0/800 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.11-rc3 ehci_hcd
S:  Product=VIA Technologies, Inc. USB 2.0
S:  SerialNumber=0000:00:10.3
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=256ms

								Pavel
-- 
People were complaining that M$ turns users into beta-testers...
...jr ghea gurz vagb qrirybcref, naq gurl frrz gb yvxr vg gung jnl!

^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [linux-usb-devel] 2.6.11-rc[23]: swsusp & usb regression
  2005-02-04 23:16 2.6.11-rc[23]: swsusp & usb regression Pavel Machek
  2005-02-04 23:23 ` Pavel Machek
  2005-02-05 15:19 ` [linux-usb-devel] " Alan Stern
@ 2005-02-06  1:59 ` Alan Stern
  2005-02-06  9:18   ` Pavel Machek
  2 siblings, 1 reply; 8+ messages in thread
From: Alan Stern @ 2005-02-06  1:59 UTC (permalink / raw)
  To: Pavel Machek; +Cc: kernel list, greg, linux-usb-devel

On Sat, 5 Feb 2005, Pavel Machek wrote:

> Hi!
> 
> In 2.6.11-rc[23], I get problems after swsusp resume:
> 
> Feb  4 23:54:39 amd kernel: Restarting tasks...<3>hub 3-0:1.0:
> over-current change on port 1
> Feb  4 23:54:39 amd kernel:  done
> Feb  4 23:54:39 amd kernel: hub 3-0:1.0: connect-debounce failed, port
> 1 disabled
> Feb  4 23:54:39 amd kernel: hub 3-0:1.0: over-current change on port 2
> Feb  4 23:54:39 amd kernel: usb 3-2: USB disconnect, address 2
> 
> After unplugging usb bluetooth key, machine hung. Sysrq still
> responded with help but I could not get any usefull output.

> I tried deselecting CONFIG_USB_EHCI_HCD, and got repeating stream of
>
> Feb  5 00:21:17 amd kernel: Restarting tasks... done
> Feb  5 00:21:17 amd kernel: hub 3-0:1.0: over-current change on port 1
> Feb  5 00:21:18 amd kernel: hub 3-0:1.0: connect-debounce failed, port 1 disabled
> Feb  5 00:21:18 amd kernel: hub 3-0:1.0: over-current change on port 2
> Feb  5 00:21:20 amd kernel: hub 3-0:1.0: connect-debounce failed, port 2 disabled

Considering all the known problems in uhci-hcd's suspend support, I'm not 
sure it's worth pursuing this.  On the other hand, all those "over-current 
change" messages you kept getting might indicate a more serious kind of 
failure.

Does setting CONFIG_USB_SUSPEND help at all?

Alan Stern


^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [linux-usb-devel] 2.6.11-rc[23]: swsusp & usb regression
  2005-02-06  1:59 ` Alan Stern
@ 2005-02-06  9:18   ` Pavel Machek
  0 siblings, 0 replies; 8+ messages in thread
From: Pavel Machek @ 2005-02-06  9:18 UTC (permalink / raw)
  To: Alan Stern; +Cc: kernel list, greg, linux-usb-devel

Hi!

> > In 2.6.11-rc[23], I get problems after swsusp resume:
> > 
> > Feb  4 23:54:39 amd kernel: Restarting tasks...<3>hub 3-0:1.0:
> > over-current change on port 1
> > Feb  4 23:54:39 amd kernel:  done
> > Feb  4 23:54:39 amd kernel: hub 3-0:1.0: connect-debounce failed, port
> > 1 disabled
> > Feb  4 23:54:39 amd kernel: hub 3-0:1.0: over-current change on port 2
> > Feb  4 23:54:39 amd kernel: usb 3-2: USB disconnect, address 2
> > 
> > After unplugging usb bluetooth key, machine hung. Sysrq still
> > responded with help but I could not get any usefull output.
> 
> > I tried deselecting CONFIG_USB_EHCI_HCD, and got repeating stream of
> >
> > Feb  5 00:21:17 amd kernel: Restarting tasks... done
> > Feb  5 00:21:17 amd kernel: hub 3-0:1.0: over-current change on port 1
> > Feb  5 00:21:18 amd kernel: hub 3-0:1.0: connect-debounce failed, port 1 disabled
> > Feb  5 00:21:18 amd kernel: hub 3-0:1.0: over-current change on port 2
> > Feb  5 00:21:20 amd kernel: hub 3-0:1.0: connect-debounce failed, port 2 disabled
> 
> Considering all the known problems in uhci-hcd's suspend support, I'm not 
> sure it's worth pursuing this.  On the other hand, all those "over-current 
> change" messages you kept getting might indicate a more serious kind of 
> failure.

Oops, I tried again with latest -bk kernel and no patches, and it
works okay; that means that failure was probably caused by my local
patches.

Sorry about the noise.
								Pavel
-- 
People were complaining that M$ turns users into beta-testers...
...jr ghea gurz vagb qrirybcref, naq gurl frrz gb yvxr vg gung jnl!

^ permalink raw reply	[flat|nested] 8+ messages in thread

end of thread, other threads:[~2005-02-06  9:19 UTC | newest]

Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2005-02-04 23:16 2.6.11-rc[23]: swsusp & usb regression Pavel Machek
2005-02-04 23:23 ` Pavel Machek
2005-02-05 15:19 ` [linux-usb-devel] " Alan Stern
2005-02-05 23:14   ` Pavel Machek
2005-02-06  0:08     ` David Brownell
2005-02-06  0:26       ` Pavel Machek
2005-02-06  1:59 ` Alan Stern
2005-02-06  9:18   ` Pavel Machek

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®