* PROBLEM: v2.4.29 won't compile with PCI support disabled
[not found] <002401c53900$9a47b0e0$1d2aa8c0@stormie>
@ 2005-04-04 10:25 ` Don Guy
2005-04-04 12:14 ` Mikael Pettersson
1 sibling, 0 replies; 3+ messages in thread
From: Don Guy @ 2005-04-04 10:25 UTC (permalink / raw)
To: linux-kernel
PROBLEM:
Attempts to compile v2.4.29 with PCI support disabled result in the
following errors:
drivers/char/char.o: In function `siig10x_init_fn':
drivers/char/char.o(.text.init+0x12cd): undefined reference to
`pci_siig10x_fn'
drivers/char/char.o: In function `siig20x_init_fn':
drivers/char/char.o(.text.init+0x12ed): undefined reference to
`pci_siig20x_fn'
It has been suggested that enabling PCI support in the kernel will make this
go away however a) enabling PCI support on a 486 which only has ISA & VLB is
downright silly, and b) a test run with CONFIG_PCI=y resulted in a plethora
of other errors.
Current kernel version: Linux version 2.4.5 (root@bigkitty) (gcc version
2.95.3 20010315 (release)) #10
Fri Jun 22 02:20:21 PDT 2001
>From .config:
#
# General setup
CONFIG_NET=y
# CONFIG_PCI is not set
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_HOTPLUG is not set
# CONFIG_PCMCIA is not set
# CONFIG_HOTPLUG_PCI is not set
CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_KCORE_AOUT is not set
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
CONFIG_OOM_KILLER=y
# CONFIG_PM is not set
# CONFIG_APM is not set
Software (from ver_linux):
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
Linux deepthought 2.4.5 #10 Fri Jun 22 02:20:21 PDT 2001 i486 unknown
Gnu C 2.95.3
Gnu make 3.79.1
binutils 2.11.90.0.19
util-linux 2.11f
mount 2.11b
modutils 2.4.16
e2fsprogs 1.27
PPP 2.4.1
awk: cmd. line:2: (FILENAME=- FNR=1) fatal: attempt to access field -1
Dynamic linker (ldd) 2.3.4
Procps 2.0.7
Net-tools 1.60
Kbd 1.06
Sh-utils 2.0
Modules Loaded ne 8390 isa-pnp ppp_deflate ppp_async ppp_generic
lp parport_pc parport
Processor (from /proc/cpuinfo):
processor : 0
vendor_id : unknown
cpu family : 4
model : 0
model name : 486
stepping : unknown
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : no
cpuid level : -1
wp : yes
flags :
bogomips : 33.17
Modules (from /proc/modules):
ne 6720 1
8390 6112 0 [ne]
isa-pnp 27400 0 [ne]
ppp_deflate 39008 0 (unused)
ppp_async 6624 0 (unused)
ppp_generic 16648 0 [ppp_deflate ppp_async]
lp 5888 0 (unused)
parport_pc 19172 1
parport 23040 1 [lp parport_pc]
Loaded driver and hardware information (from /proc/ioports, /proc/iomem):
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0240-025f : eth0
02f8-02ff : serial(set)
0330-0333 : aha1542
0378-037a : parport0
03c0-03df : vga+
03f8-03ff : serial(auto)
00000000-0009efff : System RAM
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000c8000-000cbfff : Extension ROM
000f0000-000fffff : System ROM
00100000-01ffffff : System RAM
00100000-002beda7 : Kernel code
002beda8-0039a7e7 : Kernel data
PCI Information:
n/a
SCSI information (from /proc/scsi/scsi):
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: SEAGATE Model: ST34572WS Rev: HP00
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 01 Lun: 00
Vendor: SEAGATE Model: ST34572W Rev: 0876
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 04 Lun: 00
Vendor: TOSHIBA Model: CD-ROM XM-3701TA Rev: 0236
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 05 Lun: 00
Vendor: PIONEER Model: CD-ROM DR-124X Rev: 1.00
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 06 Lun: 00
Vendor: ARCHIVE Model: Python 25501-XXX Rev: 5.AC
Type: Sequential-Access ANSI SCSI revision: 02
Any help appreciated!
-d.
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: PROBLEM: v2.4.29 won't compile with PCI support disabled
[not found] <002401c53900$9a47b0e0$1d2aa8c0@stormie>
2005-04-04 10:25 ` PROBLEM: v2.4.29 won't compile with PCI support disabled Don Guy
@ 2005-04-04 12:14 ` Mikael Pettersson
2005-04-04 12:28 ` Andrey Panin
1 sibling, 1 reply; 3+ messages in thread
From: Mikael Pettersson @ 2005-04-04 12:14 UTC (permalink / raw)
To: Don Guy; +Cc: linux-kernel
Don Guy writes:
> PROBLEM:
>
> Attempts to compile v2.4.29 with PCI support disabled result in the
> following errors:
>
> drivers/char/char.o: In function `siig10x_init_fn':
> drivers/char/char.o(.text.init+0x12cd): undefined reference to
> `pci_siig10x_fn'
> drivers/char/char.o: In function `siig20x_init_fn':
> drivers/char/char.o(.text.init+0x12ed): undefined reference to
> `pci_siig20x_fn'
>
> It has been suggested that enabling PCI support in the kernel will make this
> go away however a) enabling PCI support on a 486 which only has ISA & VLB is
> downright silly, and b) a test run with CONFIG_PCI=y resulted in a plethora
> of other errors.
Presumably this is because of other CONFIG options which are still
enabled but don't work w/o CONFIG_PCI. So please post your .config.
Both 2.4 and 2.6 kernels with CONFIG_PCI=n work Ok(*) on my 486.
/Mikael
(*) 2.6 kernels need HZ=100 and broken Fedora needs RDTSC emulation.
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: PROBLEM: v2.4.29 won't compile with PCI support disabled
2005-04-04 12:14 ` Mikael Pettersson
@ 2005-04-04 12:28 ` Andrey Panin
0 siblings, 0 replies; 3+ messages in thread
From: Andrey Panin @ 2005-04-04 12:28 UTC (permalink / raw)
To: Mikael Pettersson; +Cc: Don Guy, linux-kernel
On 094, 04 04, 2005 at 02:14:47 +0200, Mikael Pettersson wrote:
> Don Guy writes:
> > PROBLEM:
> >
> > Attempts to compile v2.4.29 with PCI support disabled result in the
> > following errors:
> >
> > drivers/char/char.o: In function `siig10x_init_fn':
> > drivers/char/char.o(.text.init+0x12cd): undefined reference to
> > `pci_siig10x_fn'
> > drivers/char/char.o: In function `siig20x_init_fn':
> > drivers/char/char.o(.text.init+0x12ed): undefined reference to
> > `pci_siig20x_fn'
> >
> > It has been suggested that enabling PCI support in the kernel will make this
> > go away however a) enabling PCI support on a 486 which only has ISA & VLB is
> > downright silly, and b) a test run with CONFIG_PCI=y resulted in a plethora
> > of other errors.
>
> Presumably this is because of other CONFIG options which are still
> enabled but don't work w/o CONFIG_PCI. So please post your .config.
>
d> Both 2.4 and 2.6 kernels with CONFIG_PCI=n work Ok(*) on my 486.
Disable CONFIG_PARPORT_SERIAL in your config.
--
Andrey Panin | Linux and UNIX system administrator
pazke@donpac.ru | PGP key: wwwkeys.pgp.net
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2005-04-04 12:29 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <002401c53900$9a47b0e0$1d2aa8c0@stormie>
2005-04-04 10:25 ` PROBLEM: v2.4.29 won't compile with PCI support disabled Don Guy
2005-04-04 12:14 ` Mikael Pettersson
2005-04-04 12:28 ` Andrey Panin
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome