From: Johannes Stezenbach <js@linuxtv.org>
To: Andrew Morton <akpm@osdl.org>
Cc: linux-kernel@vger.kernel.org, Andrew de Quincey <adq_dvb@lidskialf.net>
Subject: [DVB patch 04/51] core: add workaround for tuning problem
Date: Mon, 27 Jun 2005 14:06:04 +0200 [thread overview]
Message-ID: <20050627121410.360665000@abc> (raw)
In-Reply-To: <20050627120600.739151000@abc>
[-- Attachment #1: dvb-core-frontend-lnbswitch-workaround.patch --]
[-- Type: text/plain, Size: 2766 bytes --]
From: Andrew de Quincey <adq_dvb@lidskialf.net>
Add workaround for signal lock loss issue, where the
frontend loses the signal after some hours without
any visible reason.
Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
drivers/media/dvb/dvb-core/dvb_frontend.c | 28 +++++++++++++++++++++++++---
1 files changed, 25 insertions(+), 3 deletions(-)
Index: linux-2.6.12-git8/drivers/media/dvb/dvb-core/dvb_frontend.c
===================================================================
--- linux-2.6.12-git8.orig/drivers/media/dvb/dvb-core/dvb_frontend.c 2005-06-27 13:22:55.000000000 +0200
+++ linux-2.6.12-git8/drivers/media/dvb/dvb-core/dvb_frontend.c 2005-06-27 13:22:58.000000000 +0200
@@ -42,6 +42,8 @@
#include "dvb_frontend.h"
#include "dvbdev.h"
+// #define DEBUG_LOCKLOSS 1
+
static int dvb_frontend_debug;
static int dvb_shutdown_timeout = 5;
static int dvb_force_auto_inversion;
@@ -113,6 +115,7 @@ struct dvb_frontend_private {
int exit;
int wakeup;
fe_status_t status;
+ fe_sec_tone_mode_t tone;
};
@@ -434,9 +437,26 @@ static int dvb_frontend_thread(void *dat
/* we're tuned, and the lock is still good... */
if (s & FE_HAS_LOCK)
continue;
- else {
- /* if we _WERE_ tuned, but now don't have a lock,
- * need to zigzag */
+ else { /* if we _WERE_ tuned, but now don't have a lock */
+#ifdef DEBUG_LOCKLOSS
+ /* first of all try setting the tone again if it was on - this
+ * sometimes works around problems with noisy power supplies */
+ if (fe->ops->set_tone && (fepriv->tone == SEC_TONE_ON)) {
+ fe->ops->set_tone(fe, fepriv->tone);
+ mdelay(100);
+ s = 0;
+ fe->ops->read_status(fe, &s);
+ if (s & FE_HAS_LOCK) {
+ printk("DVB%i: Lock was lost, but regained by setting "
+ "the tone. This may indicate your power supply "
+ "is noisy/slightly incompatable with this DVB-S "
+ "adapter\n", fe->dvb->num);
+ fepriv->state = FESTATE_TUNED;
+ continue;
+ }
+ }
+#endif
+ /* some other reason for losing the lock - start zigzagging */
fepriv->state = FESTATE_ZIGZAG_FAST;
fepriv->started_auto_step = fepriv->auto_step;
check_wrapped = 0;
@@ -691,6 +711,7 @@ static int dvb_frontend_ioctl(struct ino
err = fe->ops->set_tone(fe, (fe_sec_tone_mode_t) parg);
fepriv->state = FESTATE_DISEQC;
fepriv->status = 0;
+ fepriv->tone = (fe_sec_tone_mode_t) parg;
}
break;
@@ -893,6 +914,7 @@ int dvb_register_frontend(struct dvb_ada
init_MUTEX (&fepriv->events.sem);
fe->dvb = dvb;
fepriv->inversion = INVERSION_OFF;
+ fepriv->tone = SEC_TONE_OFF;
printk ("DVB: registering frontend %i (%s)...\n",
fe->dvb->num,
--
next prev parent reply other threads:[~2005-06-27 13:37 UTC|newest]
Thread overview: 57+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-06-27 12:06 [DVB patch 00/51] DVB update Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 01/51] cinergyT2: endianness fix for raw remote-control keys Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 02/51] remove obsolete skystar2 driver Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 03/51] core: fix race condition in FE_READ_STATUS ioctl Johannes Stezenbach
2005-06-27 12:06 ` Johannes Stezenbach [this message]
2005-06-27 12:06 ` [DVB patch 05/51] core: demux error handling fix Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 06/51] core: dmxdev cleanups Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 07/51] frontend: remove unused I2C ids Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 08/51] frontend: tda1004x update Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 09/51] frontend: bcm3510: fix firmware version check Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 10/51] add missing release_firmware() calls Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 11/51] frontend: tda1004x: support tda827x tuners Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 12/51] frontend: cx22702: support for cxusb Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 13/51] frontend: l64781: improve tuning Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 14/51] DVB update Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 15/51] add Pluto2 driver Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 16/51] saa7146: kj pci_module_init cleanup Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 17/51] flexcop: add big endian register definitions Johannes Stezenbach
2005-06-27 22:50 ` Andrew Morton
2005-06-27 23:14 ` Johannes Stezenbach
2005-06-28 8:51 ` Patrick Boettcher
2005-06-27 12:06 ` [DVB patch 18/51] flexcop: woraround irq stop problem Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 19/51] Twinhan DST: frontend fixes Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 20/51] Twinhan DST: frontend polarization fix Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 21/51] ttusb-dec: kfree cleanup Johannes Stezenbach
2005-06-27 22:54 ` Andrew Morton
2005-06-27 23:20 ` Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 22/51] ttpci: add support for Technotrend/Hauppauge DVB-S SE Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 23/51] ttpci: support for new TT DVB-T-CI Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 24/51] ttpci: fix error handling for firmware communication Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 25/51] ttpci: fix bug in timeout handling Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 26/51] ttpci: fix AUDUIO_CONTINUE ioctl Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 27/51] ttpci: budget-av / tu1216 fix for QAM128 Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 28/51] ttpci: more error handling for firmware communication Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 29/51] ttpci: error handling fix Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 30/51] ttpci: cleanup indentation + whitespace Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 31/51] ttpci: make av7110_fe_lock_fix() retryable Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 32/51] ttpci: kj printk fix Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 33/51] ttpci: add support for Hauppauge/TT DVB-C budget Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 34/51] dvb-usb: support Artect T1 with broken USB ids Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 35/51] usb: fix ADSTech Instant TV DVB-T USB2.0 support Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 36/51] usb: add isochronous streaming method Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 37/51] frontend: add FMD1216ME PLL Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 38/51] usb: support Medion hybrid USB2.0 DVB-T/analogue box Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 39/51] usb: add module parm to disable remote control polling Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 40/51] frontend: add ALPS TDED4 PLL Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 41/51] usb: digitv-usb fixes Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 42/51] usb: dvb_usb_properties init fix Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 43/51] usb: cxusb DVB-T fixes Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 44/51] usb: add VideoWalker DVB-T USB ids Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 45/51] usb: digitv memcpy fix Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 46/51] usb doc update Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 47/51] usb Kconfig help text update Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 48/51] usb: add vp7045 IR keymap Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 49/51] usb: fix WideView USB ids Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 50/51] usb: vp7045 IR map fix Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 51/51] usb: IR input fixes Johannes Stezenbach
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20050627121410.360665000@abc \
--to=js@linuxtv.org \
--cc=adq_dvb@lidskialf.net \
--cc=akpm@osdl.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome