From: Johannes Stezenbach <js@linuxtv.org>
To: Andrew Morton <akpm@osdl.org>
Cc: linux-kernel@vger.kernel.org,
Hartmut Hackmann <hartmut.hackmann@t-online.de>
Subject: [DVB patch 11/51] frontend: tda1004x: support tda827x tuners
Date: Mon, 27 Jun 2005 14:06:11 +0200 [thread overview]
Message-ID: <20050627121411.722717000@abc> (raw)
In-Reply-To: <20050627120600.739151000@abc>
[-- Attachment #1: dvb-frontend-tda1004x-fixes.patch --]
[-- Type: text/plain, Size: 5534 bytes --]
From: Hartmut Hackmann <hartmut.hackmann@t-online.de>
o added preliminary support for tda827x tuners
o set parameters for drift compensation to 0
makes no sense for DVB-T but can prevent lock
Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
drivers/media/dvb/frontends/tda1004x.c | 44 ++++++++++++++++++++++++++++++---
drivers/media/dvb/frontends/tda1004x.h | 4 +++
2 files changed, 44 insertions(+), 4 deletions(-)
Index: linux-2.6.12-git8/drivers/media/dvb/frontends/tda1004x.c
===================================================================
--- linux-2.6.12-git8.orig/drivers/media/dvb/frontends/tda1004x.c 2005-06-27 13:23:04.000000000 +0200
+++ linux-2.6.12-git8/drivers/media/dvb/frontends/tda1004x.c 2005-06-27 13:23:05.000000000 +0200
@@ -120,6 +120,8 @@ static int debug;
#define TDA10046H_GPIO_OUT_SEL 0x41
#define TDA10046H_GPIO_SELECT 0x42
#define TDA10046H_AGC_CONF 0x43
+#define TDA10046H_AGC_THR 0x44
+#define TDA10046H_AGC_RENORM 0x45
#define TDA10046H_AGC_GAINS 0x46
#define TDA10046H_AGC_TUN_MIN 0x47
#define TDA10046H_AGC_TUN_MAX 0x48
@@ -272,14 +274,26 @@ static int tda10046h_set_bandwidth(struc
switch (bandwidth) {
case BANDWIDTH_6_MHZ:
tda1004x_write_buf(state, TDA10046H_TIME_WREF1, bandwidth_6mhz, sizeof(bandwidth_6mhz));
+ if (state->config->if_freq == TDA10046_FREQ_045) {
+ tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0x09);
+ tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0x4f);
+ }
break;
case BANDWIDTH_7_MHZ:
tda1004x_write_buf(state, TDA10046H_TIME_WREF1, bandwidth_7mhz, sizeof(bandwidth_7mhz));
+ if (state->config->if_freq == TDA10046_FREQ_045) {
+ tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0x0a);
+ tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0x79);
+ }
break;
case BANDWIDTH_8_MHZ:
tda1004x_write_buf(state, TDA10046H_TIME_WREF1, bandwidth_8mhz, sizeof(bandwidth_8mhz));
+ if (state->config->if_freq == TDA10046_FREQ_045) {
+ tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0x0b);
+ tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0xa3);
+ }
break;
default:
@@ -420,6 +434,14 @@ static void tda10046_init_plls(struct dv
tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0xd4);
tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0x13);
break;
+ case TDA10046_FREQ_045:
+ tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0x0b);
+ tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0xa3);
+ break;
+ case TDA10046_FREQ_052:
+ tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0x0c);
+ tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0x06);
+ break;
}
tda10046h_set_bandwidth(state, BANDWIDTH_8_MHZ); // default bandwidth 8 MHz
}
@@ -590,6 +612,16 @@ static int tda10046_init(struct dvb_fron
tda1004x_write_byteI(state, TDA10046H_AGC_CONF, 0x0a); // AGC setup
tda1004x_write_byteI(state, TDA10046H_CONF_POLARITY, 0x60); // set AGC polarities
break;
+ case TDA10046_AGC_IFO_AUTO_POS:
+ tda1004x_write_byteI(state, TDA10046H_AGC_CONF, 0x0a); // AGC setup
+ tda1004x_write_byteI(state, TDA10046H_CONF_POLARITY, 0x00); // set AGC polarities
+ break;
+ case TDA10046_AGC_TDA827X:
+ tda1004x_write_byteI(state, TDA10046H_AGC_CONF, 0x02); // AGC setup
+ tda1004x_write_byteI(state, TDA10046H_AGC_THR, 0x70); // AGC Threshold
+ tda1004x_write_byteI(state, TDA10046H_AGC_RENORM, 0x0E); // Gain Renormalize
+ tda1004x_write_byteI(state, TDA10046H_CONF_POLARITY, 0x60); // set AGC polarities
+ break;
}
tda1004x_write_byteI(state, TDA10046H_CONF_TRISTATE1, 0x61); // Turn both AGC outputs on
tda1004x_write_byteI(state, TDA10046H_AGC_TUN_MIN, 0); // }
@@ -1091,9 +1123,12 @@ static int tda1004x_sleep(struct dvb_fro
break;
case TDA1004X_DEMOD_TDA10046:
- tda1004x_write_mask(state, TDA1004X_CONFC4, 1, 1);
- if (state->config->pll_sleep != NULL)
+ if (state->config->pll_sleep != NULL) {
+ tda1004x_enable_tuner_i2c(state);
state->config->pll_sleep(fe);
+ tda1004x_disable_tuner_i2c(state);
+ }
+ tda1004x_write_mask(state, TDA1004X_CONFC4, 1, 1);
break;
}
state->initialised = 0;
@@ -1104,8 +1139,9 @@ static int tda1004x_sleep(struct dvb_fro
static int tda1004x_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fesettings)
{
fesettings->min_delay_ms = 800;
- fesettings->step_size = 166667;
- fesettings->max_drift = 166667*2;
+ /* Drift compensation makes no sense for DVB-T */
+ fesettings->step_size = 0;
+ fesettings->max_drift = 0;
return 0;
}
Index: linux-2.6.12-git8/drivers/media/dvb/frontends/tda1004x.h
===================================================================
--- linux-2.6.12-git8.orig/drivers/media/dvb/frontends/tda1004x.h 2005-06-27 13:23:02.000000000 +0200
+++ linux-2.6.12-git8/drivers/media/dvb/frontends/tda1004x.h 2005-06-27 13:23:05.000000000 +0200
@@ -34,11 +34,15 @@ enum tda10046_xtal {
enum tda10046_agc {
TDA10046_AGC_DEFAULT, /* original configuration */
TDA10046_AGC_IFO_AUTO_NEG, /* IF AGC only, automatic, negtive */
+ TDA10046_AGC_IFO_AUTO_POS, /* IF AGC only, automatic, positive */
+ TDA10046_AGC_TDA827X, /* IF AGC only, special setup for tda827x */
};
enum tda10046_if {
TDA10046_FREQ_3617, /* original config, 36,166 MHZ */
TDA10046_FREQ_3613, /* 36,13 MHZ */
+ TDA10046_FREQ_045, /* low IF, 4.0, 4.5, or 5.0 MHZ */
+ TDA10046_FREQ_052, /* low IF, 5.1667 MHZ for tda9889 */
};
struct tda1004x_config
--
next prev parent reply other threads:[~2005-06-27 14:02 UTC|newest]
Thread overview: 57+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-06-27 12:06 [DVB patch 00/51] DVB update Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 01/51] cinergyT2: endianness fix for raw remote-control keys Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 02/51] remove obsolete skystar2 driver Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 03/51] core: fix race condition in FE_READ_STATUS ioctl Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 04/51] core: add workaround for tuning problem Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 05/51] core: demux error handling fix Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 06/51] core: dmxdev cleanups Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 07/51] frontend: remove unused I2C ids Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 08/51] frontend: tda1004x update Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 09/51] frontend: bcm3510: fix firmware version check Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 10/51] add missing release_firmware() calls Johannes Stezenbach
2005-06-27 12:06 ` Johannes Stezenbach [this message]
2005-06-27 12:06 ` [DVB patch 12/51] frontend: cx22702: support for cxusb Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 13/51] frontend: l64781: improve tuning Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 14/51] DVB update Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 15/51] add Pluto2 driver Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 16/51] saa7146: kj pci_module_init cleanup Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 17/51] flexcop: add big endian register definitions Johannes Stezenbach
2005-06-27 22:50 ` Andrew Morton
2005-06-27 23:14 ` Johannes Stezenbach
2005-06-28 8:51 ` Patrick Boettcher
2005-06-27 12:06 ` [DVB patch 18/51] flexcop: woraround irq stop problem Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 19/51] Twinhan DST: frontend fixes Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 20/51] Twinhan DST: frontend polarization fix Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 21/51] ttusb-dec: kfree cleanup Johannes Stezenbach
2005-06-27 22:54 ` Andrew Morton
2005-06-27 23:20 ` Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 22/51] ttpci: add support for Technotrend/Hauppauge DVB-S SE Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 23/51] ttpci: support for new TT DVB-T-CI Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 24/51] ttpci: fix error handling for firmware communication Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 25/51] ttpci: fix bug in timeout handling Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 26/51] ttpci: fix AUDUIO_CONTINUE ioctl Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 27/51] ttpci: budget-av / tu1216 fix for QAM128 Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 28/51] ttpci: more error handling for firmware communication Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 29/51] ttpci: error handling fix Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 30/51] ttpci: cleanup indentation + whitespace Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 31/51] ttpci: make av7110_fe_lock_fix() retryable Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 32/51] ttpci: kj printk fix Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 33/51] ttpci: add support for Hauppauge/TT DVB-C budget Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 34/51] dvb-usb: support Artect T1 with broken USB ids Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 35/51] usb: fix ADSTech Instant TV DVB-T USB2.0 support Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 36/51] usb: add isochronous streaming method Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 37/51] frontend: add FMD1216ME PLL Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 38/51] usb: support Medion hybrid USB2.0 DVB-T/analogue box Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 39/51] usb: add module parm to disable remote control polling Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 40/51] frontend: add ALPS TDED4 PLL Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 41/51] usb: digitv-usb fixes Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 42/51] usb: dvb_usb_properties init fix Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 43/51] usb: cxusb DVB-T fixes Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 44/51] usb: add VideoWalker DVB-T USB ids Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 45/51] usb: digitv memcpy fix Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 46/51] usb doc update Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 47/51] usb Kconfig help text update Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 48/51] usb: add vp7045 IR keymap Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 49/51] usb: fix WideView USB ids Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 50/51] usb: vp7045 IR map fix Johannes Stezenbach
2005-06-27 12:06 ` [DVB patch 51/51] usb: IR input fixes Johannes Stezenbach
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20050627121411.722717000@abc \
--to=js@linuxtv.org \
--cc=akpm@osdl.org \
--cc=hartmut.hackmann@t-online.de \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome