Re: cx22702.c, 2.6.13-rc3 and a pci Hauppauge Nova-T DVB-T TV card

[Johannes Stezenbach <js@linuxtv.org>]

Andrew Benton wrote:
> My pci TV card (a Hauppauge Nova-T DVB-T) works fine with a 2.6.13-rc2 
> kernel but won't work with a 2.6.13-rc3 by a process of elimination I've 
> found that if I reverse this part of the 2.6.13-rc3 patch the card works 
> fine. Please do not include this in the 2.6.13 kernel.

Reversing this patch is not the right fix as it would break
support for the cxusb.c driver. I guess the output_mode needs to
be set for the Hauppauge Nova-T DVB-T (cx88-dvb.c).
cx88-dvb.c is in video4linux CVS, not DVB CVS.

Patrick, can you send a patch for this?

Johannes

> diff --git a/drivers/media/dvb/frontends/cx22702.c 
> b/drivers/media/dvb/frontends/cx22702.c
> --- a/drivers/media/dvb/frontends/cx22702.c
> +++ b/drivers/media/dvb/frontends/cx22702.c
> @@ -76,7 +76,6 @@ static u8 init_tab [] = {
> 	0x49, 0x56,
> 	0x6b, 0x1e,
> 	0xc8, 0x02,
> -	0xf8, 0x02,
> 	0xf9, 0x00,
> 	0xfa, 0x00,
> 	0xfb, 0x00,
> @@ -347,10 +346,11 @@ static int cx22702_init (struct dvb_fron
> 	for (i=0; i<sizeof(init_tab); i+=2)
> 		cx22702_writereg (state, init_tab[i], init_tab[i+1]);
> 
> +	cx22702_writereg (state, 0xf8, (state->config->output_mode << 1) & 0x02);
> 
> 	/* init PLL */
> 	if (state->config->pll_init) {
> -	        cx22702_writereg (state, 0x0D, cx22702_readreg(state,0x0D) &0xfe);
> +		cx22702_writereg (state, 0x0D, cx22702_readreg(state,0x0D) & 0xfe);
> 		state->config->pll_init(fe);
> 		cx22702_writereg (state, 0x0D, cx22702_readreg(state,0x0D) | 1);
> 	}