* Re: help! kernel errors?
@ 2005-07-25 10:28 msmulders
0 siblings, 0 replies; 6+ messages in thread
From: msmulders @ 2005-07-25 10:28 UTC (permalink / raw)
To: linux-kernel
I'm sorry, here's some info on the backup procedure and system info:
The backup script mounts an smbfs filesystem (smbmnt v2.2.10) over a direct
(crosslink) 1000mbps link and uses rsync to backup the remote files from the
mountpoint to a local removable disk. (yeah I know. I tried nfs, but it's a
pain in the butt on Winblows. Better ideas/suggestions are welcome!)
The removable disk is a Maxtor 6Y120P0 120GB drive in a Promise SuperSWAP 1000
bay connected to a Promise TX2000 ATA RAID card. Using kernel module 'FastTrak'
built from the latest PROMISE FastTrak Series Linux Driver source.
The backup was running flawlessly until a month ago. I updated the kernel (as
can be seen below) but to no avail.
Now, the backup runs ok for quite some time.. when it started spitting the
errors it had already transferred 65GB of data.
Thanks for any pointers in the right direction!
# /usr/src/linux-2.4.31/scripts/ver_linux
Linux server 2.4.31 #1 Thu Jul 7 12:19:58 CEST 2005 i686 unknown unknown
GNU/Linux
Gnu C 3.2.3
Gnu make 3.80
util-linux 2.12
mount 2.12
modutils 2.4.25
e2fsprogs 1.34
jfsutils 1.1.3
xfsprogs 2.5.6
pcmcia-cs 3.2.5
quota-tools 3.09.
PPP 2.4.1
Linux C Library 2.3.2
Dynamic linker (ldd) 2.3.2
Linux C++ Library 5.0.3
Procps 2.0.16
Net-tools 1.60
Kbd 1.08
Sh-utils 5.0
Modules Loaded ide-scsi natsemi crc32 ns83820 agpgart FastTrak
# cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 15
model : 0
model name : Intel(R) Pentium(R) 4 CPU 1400MHz
stepping : 10
cpu MHz : 1399.990
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm
bogomips : 2791.83
# cat /proc/modules
ide-scsi 10288 0
natsemi 16800 1
crc32 2880 0 [natsemi]
ns83820 12268 1
agpgart 40440 0 (unused)
FastTrak 94692 0
# cat /proc/ioports
0000-001f : dma1
0020-003f : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
01f0-01f7 : ide0
02f8-02ff : serial(auto)
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(auto)
0500-050f : Intel Corp. 82801BA/BAM SMBus
0cf8-0cff : PCI conf1
9000-9007 : Promise Technology, Inc. PDC20271
9000-9007 : ide2
9400-9403 : Promise Technology, Inc. PDC20271
9402-9402 : ide2
9800-9807 : Promise Technology, Inc. PDC20271
9800-9807 : FT(base)
9c00-9c03 : Promise Technology, Inc. PDC20271
9c02-9c02 : FT(ctrl)
a000-a00f : Promise Technology, Inc. PDC20271
a000-a007 : ide2
a008-a00f : ide3
a400-a4ff : National Semiconductor Corporation DP83815 (MacPhyter) Ethernet
Controller
a400-a4ff : eth1
a800-a8ff : National Semiconductor Corporation DP83820 10/100/1000 Ethernet
Controller
f000-f00f : Intel Corp. 82801BA IDE U100
f000-f007 : ide0
f008-f00f : ide1
# cat /proc/iomem
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000d0000-000d97ff : Extension ROM
000f0000-000fffff : System ROM
00100000-17ffffff : System RAM
00100000-002e1a28 : Kernel code
002e1a29-00379e03 : Kernel data
e0000000-e3ffffff : Intel Corp. 82845 845 (Brookdale) Chipset Host Bridge
e4000000-e5ffffff : PCI Bus #01
e4000000-e5ffffff : nVidia Corporation NV5M64 [RIVA TNT2 Model 64/Model 64
Pro]
e6000000-e7ffffff : PCI Bus #01
e6000000-e6ffffff : nVidia Corporation NV5M64 [RIVA TNT2 Model 64/Model 64
Pro]
e9000000-e900ffff : Promise Technology, Inc. PDC20271
e9010000-e9010fff : National Semiconductor Corporation DP83815 (MacPhyter)
Ethernet Controller
e9010000-e9010fff : eth1
e9011000-e9011fff : National Semiconductor Corporation DP83820 10/100/1000
Ethernet Controller
fec00000-fec00fff : reserved
fee00000-fee00fff : reserved
ffb00000-ffffffff : reserved
# lspci -vvv
00:00.0 Host bridge: Intel Corp. 82845 845 (Brookdale) Chipset Host Bridge (rev
03)
Subsystem: Intel Corp. 82845 845 (Brookdale) Chipset Host Bridge
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR-
Latency: 0
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=64M]
Capabilities: [e4] #09 [0104]
Capabilities: [a0] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans-
64bit- FW+ AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW-
Rate=<none>
00:01.0 PCI bridge: Intel Corp. 82845 845 (Brookdale) Chipset AGP Bridge (rev
03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: e6000000-e7ffffff
Prefetchable memory behind bridge: e4000000-e5ffffff
BridgeCtl: Parity- SERR+ NoISA+ VGA+ MAbort- >Reset- FastB2B-
00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB PCI Bridge (rev 12) (prog-if 00
[Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 00009000-0000afff
Memory behind bridge: e8000000-e9ffffff
Prefetchable memory behind bridge: fff00000-000fffff
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
00:1f.0 ISA bridge: Intel Corp. 82801BA ISA Bridge (LPC) (rev 12)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR+
Latency: 0
00:1f.1 IDE interface: Intel Corp. 82801BA IDE U100 (rev 12) (prog-if 80
[Master])
Subsystem: Intel Corp.: Unknown device 2442
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Region 4: I/O ports at f000 [size=16]
00:1f.3 SMBus: Intel Corp. 82801BA/BAM SMBus (rev 12)
Subsystem: Intel Corp.: Unknown device 2442
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 11
Region 4: I/O ports at 0500 [size=16]
01:00.0 VGA compatible controller: nVidia Corporation NV5M64 [RIVA TNT2 Model
64/Model 64 Pro] (rev 15) (prog-if 00 [VGA])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 9
Region 0: Memory at e6000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at e4000000 (32-bit, prefetchable) [size=32M]
Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: [60] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA- ITACoh- GART64- HTrans-
64bit- FW- AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW-
Rate=<none>
02:09.0 RAID bus controller: Promise Technology, Inc. PDC20271 (rev 02) (prog-if
85)
Subsystem: Promise Technology, Inc.: Unknown device 4d68
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32 (1000ns min, 4500ns max), cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at 9000 [size=8]
Region 1: I/O ports at 9400 [size=4]
Region 2: I/O ports at 9800 [size=8]
Region 3: I/O ports at 9c00 [size=4]
Region 4: I/O ports at a000 [size=16]
Region 5: Memory at e9000000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: [60] Power Management version 1
Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:0a.0 Ethernet controller: National Semiconductor Corporation DP83815
(MacPhyter) Ethernet Controller
Subsystem: National Semiconductor Corporation DP83815 (MacPhyter)
Ethernet Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (2750ns min, 13000ns max)
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at a400 [size=256]
Region 1: Memory at e9010000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=320mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME+
02:0b.0 Ethernet controller: National Semiconductor Corporation DP83820
10/100/1000 Ethernet Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (2750ns min, 13000ns max), cache line size 08
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at a800 [size=256]
Region 1: Memory at e9011000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at <unassigned> [disabled] [size=64K]
# cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: Promise Model: 1+0 Span Rev: 1.10
Type: Direct-Access ANSI SCSI revision: 02
Beantwoorden Frederik Deweerdt <frederik.deweerdt@gmail.com>:
> Hi,
> Reading this may help kernel developers to help you:
> http://www.kernel.org/pub/linux/docs/lkml/reporting-bugs.html
> Regards,
> Frederik Deweerdt
>
>
^ permalink raw reply [flat|nested] 6+ messages in thread* help! kernel errors?
@ 2005-07-25 9:50 msmulders
2005-07-25 11:03 ` Vladimir V. Saveliev
0 siblings, 1 reply; 6+ messages in thread
From: msmulders @ 2005-07-25 9:50 UTC (permalink / raw)
To: linux-kernel
Hello,
I'm getting loads and loads of kernel errors in my syslog, but am unable to
decipher them into anything meaningful. It occurs during a backup procedure and
looking at the error it's got something to do with process 'rsync' but I haven't
got a clue what's going wrong here (hardware? drivers? modules? kernel? what?).
I'm hoping you guys can help me out. The repeating error is attached below!
Thanks so much in advance,
- Mark
Jul 24 23:24:51 server kernel: Unable to handle kernel paging request at virtual
address 04003428
Jul 24 23:24:51 server kernel: printing eip:
Jul 24 23:24:51 server kernel: c014f3e8
Jul 24 23:24:51 server kernel: *pde = 00000000
Jul 24 23:24:51 server kernel: Oops: 0000
Jul 24 23:24:51 server kernel: CPU: 0
Jul 24 23:24:51 server kernel: EIP: 0010:[<c014f3e8>] Not tainted
Jul 24 23:24:51 server kernel: EFLAGS: 00010213
Jul 24 23:24:51 server kernel: eax: 0015422f ebx: 04003400 ecx: 0000000f
edx: c1440000
Jul 24 23:24:51 server kernel: esi: 00000000 edi: c1453fa8 ebp: 0015422e
esp: c329de34
Jul 24 23:24:51 server kernel: ds: 0018 es: 0018 ss: 0018
Jul 24 23:24:51 server kernel: Process rsync (pid: 29653, stackpage=c329d000)
Jul 24 23:24:51 server kernel: Stack: 000000e4 d8a18040 00000002 0015422e
00000002 cf313000 c99e0b00 c014f641
Jul 24 23:24:51 server kernel: cf313000 0015422e c1453fa8 00000000
00000000 fffffff3 c99e0b00 c329de8c
Jul 24 23:24:51 server kernel: d8a1147a cf313000 00000002 0001075a
0001075a 00000286 00000020 00000000
Jul 24 23:24:51 server kernel: Call Trace: [<c014f641>] [<d8a1147a>]
[<c0143bc7>] [<c01444a8>] [<c01448f9>]
Jul 24 23:24:51 server kernel: [<c0144d60>] [<c0138e63>] [<c0139213>]
[<c0108c87>]
Jul 24 23:24:51 server kernel:
Jul 24 23:24:51 server kernel: Code: 39 6b 28 89 de 75 f1 8b 44 24 20 39 83 a0
00 00 00 75 e5 8b
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: help! kernel errors?
2005-07-25 9:50 msmulders
@ 2005-07-25 11:03 ` Vladimir V. Saveliev
2005-07-25 11:59 ` msmulders
2005-07-25 16:20 ` Erik Mouw
0 siblings, 2 replies; 6+ messages in thread
From: Vladimir V. Saveliev @ 2005-07-25 11:03 UTC (permalink / raw)
To: msmulders; +Cc: linux-kernel
Hello
msmulders@pronexus.nl wrote:
> Hello,
>
> I'm getting loads and loads of kernel errors in my syslog, but am unable to
> decipher them into anything meaningful.
You may want to take a look at linux/Documentation/oops-tracing.txt
> It occurs during a backup procedure and
> looking at the error it's got something to do with process 'rsync' but I haven't
> got a clue what's going wrong here (hardware? drivers? modules? kernel? what?).
> I'm hoping you guys can help me out. The repeating error is attached below!
>
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: help! kernel errors?
2005-07-25 11:03 ` Vladimir V. Saveliev
@ 2005-07-25 11:59 ` msmulders
2005-07-25 16:20 ` Erik Mouw
1 sibling, 0 replies; 6+ messages in thread
From: msmulders @ 2005-07-25 11:59 UTC (permalink / raw)
To: linux-kernel
Beantwoorden "Vladimir V. Saveliev" <vs@namesys.com>:
> You may want to take a look at linux/Documentation/oops-tracing.txt
Does this get us any closer? Still gibberish to me?
~/ksymoops-2.4.9# ./ksymoops < err.txt
ksymoops 2.4.9 on i686 2.4.31. Options used
-V (default)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.4.31/ (default)
-m /usr/src/linux/System.map (default)
Warning: You did not tell me where to find symbol information. I will
assume that the log matches the kernel and modules that are running
right now and I'll use the default options above for symbol resolution.
If the current kernel and/or modules do not match the log, you can get
more accurate output by telling me the kernel version and where to find
map, modules, ksyms etc. ksymoops -h explains the options.
Jul 24 23:24:51 server kernel: Unable to handle kernel paging request
at virtual
address 04003428
Jul 24 23:24:51 server kernel: c014f3e8
Jul 24 23:24:51 server kernel: *pde = 00000000
Jul 24 23:24:51 server kernel: Oops: 0000
Jul 24 23:24:51 server kernel: CPU: 0
Jul 24 23:24:51 server kernel: EIP: 0010:[<c014f3e8>] Not tainted
Using defaults from ksymoops -t elf32-i386 -a i386
Jul 24 23:24:51 server kernel: EFLAGS: 00010213
Jul 24 23:24:51 server kernel: eax: 0015422f ebx: 04003400 ecx: 0000000f
edx: c1440000
Jul 24 23:24:51 server kernel: esi: 00000000 edi: c1453fa8 ebp: 0015422e
esp: c329de34
Jul 24 23:24:51 server kernel: ds: 0018 es: 0018 ss: 0018
Jul 24 23:24:51 server kernel: Process rsync (pid: 29653, stackpage=c329d000)
Jul 24 23:24:51 server kernel: Stack: 000000e4 d8a18040 00000002 0015422e
00000002 cf313000 c99e0b00 c014f641
Jul 24 23:24:51 server kernel: cf313000 0015422e c1453fa8 00000000
00000000 fffffff3 c99e0b00 c329de8c
Jul 24 23:24:51 server kernel: d8a1147a cf313000 00000002 0001075a
0001075a 00000286 00000020 00000000
Jul 24 23:24:51 server kernel: Call Trace: [<c014f641>] [<d8a1147a>]
[<c0143bc7>] [<c01444a8>] [<c01448f9>]
Jul 24 23:24:51 server kernel: [<c0144d60>] [<c0138e63>] [<c0139213>]
[<c0108c87>]
Jul 24 23:24:51 server kernel: Code: 39 6b 28 89 de 75 f1 8b 44 24 20 39 83 a0
00 00 00 75 e5 8b
>> EIP; c014f3e8 <find_inode+28/80> <=====
>> edx; c1440000 <_end+10672fc/1852635c>
>> edi; c1453fa8 <_end+107b2a4/1852635c>
>> esp; c329de34 <_end+2ec5130/1852635c>
Trace; c014f641 <iunique+71/80>
Trace; d8a1147a <END_OF_CODE+ccaf/????>
Trace; c0143bc7 <real_lookup+c7/f0>
Trace; c01444a8 <link_path_walk+788/a20>
Trace; c01448f9 <path_lookup+39/40>
Trace; c0144d60 <open_namei+70/5f0>
Trace; c0138e63 <filp_open+43/70>
Trace; c0139213 <sys_open+53/a0>
Trace; c0108c87 <system_call+33/38>
Code; c014f3e8 <find_inode+28/80>
00000000 <_EIP>:
Code; c014f3e8 <find_inode+28/80> <=====
0: 39 6b 28 cmp %ebp,0x28(%ebx) <=====
Code; c014f3eb <find_inode+2b/80>
3: 89 de mov %ebx,%esi
Code; c014f3ed <find_inode+2d/80>
5: 75 f1 jne fffffff8 <_EIP+0xfffffff8>
Code; c014f3ef <find_inode+2f/80>
7: 8b 44 24 20 mov 0x20(%esp,1),%eax
Code; c014f3f3 <find_inode+33/80>
b: 39 83 a0 00 00 00 cmp %eax,0xa0(%ebx)
Code; c014f3f9 <find_inode+39/80>
11: 75 e5 jne fffffff8 <_EIP+0xfffffff8>
Code; c014f3fb <find_inode+3b/80>
13: 8b 00 mov (%eax),%eax
1 warning issued. Results may not be reliable.
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: help! kernel errors?
2005-07-25 11:03 ` Vladimir V. Saveliev
2005-07-25 11:59 ` msmulders
@ 2005-07-25 16:20 ` Erik Mouw
2005-07-25 18:28 ` msmulders
1 sibling, 1 reply; 6+ messages in thread
From: Erik Mouw @ 2005-07-25 16:20 UTC (permalink / raw)
To: Vladimir V. Saveliev; +Cc: msmulders, linux-kernel
On Mon, Jul 25, 2005 at 03:03:03PM +0400, Vladimir V. Saveliev wrote:
> msmulders@pronexus.nl wrote:
> >Hello,
> >
> >I'm getting loads and loads of kernel errors in my syslog, but am unable to
> >decipher them into anything meaningful.
> You may want to take a look at linux/Documentation/oops-tracing.txt
And we're only interested in the *first* Oops, not in any later one.
The first Oops is most probably the cause of all other Oopses.
Erik
--
+-- Erik Mouw -- www.harddisk-recovery.com -- +31 70 370 12 90 --
| Lab address: Delftechpark 26, 2628 XH, Delft, The Netherlands
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: help! kernel errors?
2005-07-25 16:20 ` Erik Mouw
@ 2005-07-25 18:28 ` msmulders
0 siblings, 0 replies; 6+ messages in thread
From: msmulders @ 2005-07-25 18:28 UTC (permalink / raw)
To: linux-kernel
> And we're only interested in the *first* Oops, not in any later one.
> The first Oops is most probably the cause of all other Oopses.
The error given was the very first oops. The hundreds (didn't count them ;))
that followed were exactly the same as far as I could see in a glimpse.
Any idea from the ksymoops output I sent?
- Mark
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2005-07-25 18:28 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2005-07-25 10:28 help! kernel errors? msmulders
-- strict thread matches above, loose matches on Subject: below --
2005-07-25 9:50 msmulders
2005-07-25 11:03 ` Vladimir V. Saveliev
2005-07-25 11:59 ` msmulders
2005-07-25 16:20 ` Erik Mouw
2005-07-25 18:28 ` msmulders
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®