From: Dominik Karall <dominik.karall@gmx.net>
To: "John Stoffel" <john@stoffel.org>
Cc: Andrew Morton <akpm@osdl.org>, linux-kernel@vger.kernel.org
Subject: Re: 2.6.13-mm1
Date: Thu, 1 Sep 2005 18:28:05 +0200 [thread overview]
Message-ID: <200509011828.13579.dominik.karall@gmx.net> (raw)
In-Reply-To: <17175.10191.634957.119742@smtp.charter.net>
[-- Attachment #1: Type: text/plain, Size: 4118 bytes --]
On Thursday 01 September 2005 18:09, John Stoffel wrote:
> >>>>> "Dominik" == Dominik Karall <dominik.karall@gmx.net> writes:
>
> Dominik> When I switch on my external harddisk, which is connected
> Dominik> through usb, the kernel hangs. First time I did that at
> Dominik> bootup there were a lot of backtraces printed on the screen
> Dominik> but they did not find the way in the logfile :/ Now I
> Dominik> switched the drive on while running and everything freezes
> Dominik> after those messages:
>
> Dominik> usb 1-2.2: new high speed USB device using ehci_hcd and address 3
> Dominik> scsi2 : SCSI emulation for USB Mass Storage devices
> Dominik> usb-storage: device found at 3
> Dominik> usb-storage: waiting for device to settle before scanning
> Dominik> Vendor: ST325082 Model: 3A Rev: 3.02
> Dominik> Type: Direct-Access ANSI SCSI revision:
> 00 Dominik> SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
> Dominik> sda: assuming drive cache: write through
> Dominik> SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
> Dominik> sda: assuming drive cache: write through
>
> Have you updated the firmware on the USB enclosure? I have one using
> the Prolific chipset for both USB/Firewire and it was crappy until I
> upgraded the firmware on there. It made all the difference.
>
> Also, can you use this USB enclosure on Windows or another computer?
> And which kernel version are you running? It's not clear if your on
> 2.6.13-mm1 or some other version.
2.6.13-mm1, as mentioned in subject.
The external hdd worked with 2.6.13-rc6-mm1 and 2.6.13-ck1, which were the
last versions I ran. Didn't test 2.6.13-rc6-mm2.
> More details would be good too, such as:
>
> lsusb
Bus 001 Device 004: ID 0840:009c Argosy Research, Inc.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0840 Argosy Research, Inc.
idProduct 0x009c
bcdDevice 0.01
iManufacturer 1 Generic
iProduct 2 USB 2.0 Mass Storage Device
iSerial 3 009C0000000049BD
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk (Zip)
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
dominik
[-- Attachment #2: Type: application/pgp-signature, Size: 316 bytes --]
next prev parent reply other threads:[~2005-09-01 16:24 UTC|newest]
Thread overview: 67+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-09-01 10:55 2.6.13-mm1 Andrew Morton
2005-09-01 14:22 ` 2.6.13-mm1 Martin J. Bligh
2005-09-01 14:50 ` 2.6.13-mm1 Alan Cox
2005-09-01 20:56 ` 2.6.13-mm1 Joel Schopp
2005-09-01 21:16 ` 2.6.13-mm1 Alan Cox
2005-09-01 21:26 ` 2.6.13-mm1 Joel Schopp
2005-09-01 21:44 ` 2.6.13-mm1 Alan Cox
2005-09-12 16:34 ` tty patches in 2.6.13-mm3 (was Re: 2.6.13-mm1) serue
2005-09-12 16:55 ` Joel Schopp
2005-09-12 17:04 ` 2.6.13-mm1 serue
2005-09-01 14:59 ` 2.6.13-mm1 Adrian Bunk
2005-09-01 15:01 ` [PATCH] mips: remove typedef from struct flock Yoichi Yuasa
2005-09-01 15:38 ` 2.6.13-mm1 Dominik Karall
2005-09-01 16:09 ` 2.6.13-mm1 John Stoffel
2005-09-01 16:28 ` Dominik Karall [this message]
2005-09-01 17:34 ` 2.6.13-mm1 John Stoffel
2005-09-01 18:05 ` 2.6.13-mm1 Dominik Karall
2005-09-01 18:27 ` 2.6.13-mm1 John Stoffel
2005-09-01 15:44 ` [PATCH] : struct dentry : place d_hash close to d_parent and d_name to speedup lookups Eric Dumazet
2005-09-01 15:48 ` Eric Dumazet
2005-09-01 17:36 ` Dipankar Sarma
2005-09-01 19:52 ` Eric Dumazet
2005-09-01 17:41 ` 2.6.13-mm1 - drivers/isdn/i4l/isdn_tty broken Damir Perisa
2005-09-01 21:06 ` Alan Cox
2005-09-02 1:05 ` 2.6.13-mm1 - drivers/serial/jsm/jsm_tty broken too Damir Perisa
2005-09-01 21:14 ` 2.6.13-mm1: PCMCIA problem Rafael J. Wysocki
2005-09-01 21:28 ` Andrew Morton
2005-09-02 8:30 ` Rafael J. Wysocki
2005-09-02 8:37 ` Rafael J. Wysocki
2005-09-02 10:43 ` Pavel Machek
2005-09-02 10:58 ` Rafael J. Wysocki
2005-09-02 11:09 ` Andrew Morton
2005-09-02 11:45 ` 2.6.13-mm1: swsusp problem (was: PCMCIA problem) Rafael J. Wysocki
2005-09-02 14:17 ` Rafael J. Wysocki
2005-09-04 14:29 ` 2.6.13-mm1: PCMCIA problem Pavel Machek
2005-09-01 22:19 ` 2.6.13-mm1: broken drivers/video/sis/Makefile Adrian Bunk
2005-09-01 23:24 ` Thomas Winischhofer
2005-09-01 23:25 ` 2.6.13-mm1: misc mwave issues Adrian Bunk
2005-09-02 12:36 ` Alan Cox
2005-09-02 13:57 ` 2.6.13-mm1 Benjamin LaHaise
2005-09-02 20:57 ` 2.6.13-mm1 Andrew Morton
2005-09-06 11:50 ` 2.6.13-mm1 Benjamin LaHaise
2005-09-02 14:30 ` 2.6.13-mm1 Alexander Nyberg
2005-09-02 14:40 ` 2.6.13-mm1 Zwane Mwaikambo
2005-09-03 12:21 ` 2.6.13-mm1 Adrian Bunk
2005-09-03 19:34 ` 2.6.13-mm1 Andrew Morton
2005-09-03 19:54 ` 2.6.13-mm1 Adrian Bunk
2005-09-03 20:06 ` 2.6.13-mm1 Andrew Morton
2005-09-04 20:00 ` 2.6.13-mm1 Adrian Bunk
2005-09-04 21:24 ` 2.6.13-mm1 Jesper Juhl
2005-09-04 21:30 ` 2.6.13-mm1 Andrew Morton
2005-09-04 21:36 ` 2.6.13-mm1 Jesper Juhl
2005-09-07 0:05 ` 2.6.13-mm1 Paul Jackson
2005-09-07 0:32 ` 2.6.13-mm1 Andrew Morton
2005-09-07 0:44 ` 2.6.13-mm1 Jesper Juhl
2005-09-07 2:38 ` 2.6.13-mm1 Paul Jackson
2005-09-04 10:26 ` 2.6.13-mm1 Alexander Nyberg
2005-09-01 18:21 2.6.13-mm1 J.A. Magallon
2005-09-01 22:00 ` 2.6.13-mm1 Adrian Bunk
[not found] <fa.hqupr0d.1u3af35@ifi.uio.no>
2005-09-02 1:39 ` 2.6.13-mm1 Reuben Farrelly
2005-09-02 1:56 ` 2.6.13-mm1 J.A. Magallon
2005-09-02 2:06 ` 2.6.13-mm1 Andrew Morton
2005-09-02 15:53 ` 2.6.13-mm1 J.A. Magallon
2005-09-02 21:45 ` 2.6.13-mm1 Andrew Morton
2005-09-02 22:55 ` 2.6.13-mm1 J.A. Magallon
2005-09-03 0:15 ` 2.6.13-mm1 gcoady
2005-09-02 2:04 ` 2.6.13-mm1 Andrew Morton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200509011828.13579.dominik.karall@gmx.net \
--to=dominik.karall@gmx.net \
--cc=akpm@osdl.org \
--cc=john@stoffel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®