[PATCH] Typo fix: explictly -> explicitly

[PATCH] Typo fix: explictly -> explicitly

[Jean Delvare]

Hi all, Andrew,

Typo fix: explictly -> explicitly.

Signed-off-by: Jean Delvare <khali@linux-fr.org>

 Documentation/cpusets.txt |    2 +-
 drivers/char/cyclades.c   |    2 +-
 drivers/scsi/mesh.c       |    2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

--- linux-2.6.14-rc2.orig/Documentation/cpusets.txt	2005-09-13 21:20:57.000000000 +0200
+++ linux-2.6.14-rc2/Documentation/cpusets.txt	2005-09-25 17:02:19.000000000 +0200
@@ -94,7 +94,7 @@
 But larger systems, which benefit more from careful processor and
 memory placement to reduce memory access times and contention,
 and which typically represent a larger investment for the customer,
-can benefit from explictly placing jobs on properly sized subsets of
+can benefit from explicitly placing jobs on properly sized subsets of
 the system.
 
 This can be especially valuable on:
--- linux-2.6.14-rc2.orig/drivers/char/cyclades.c	2005-09-13 21:21:05.000000000 +0200
+++ linux-2.6.14-rc2/drivers/char/cyclades.c	2005-09-25 17:02:28.000000000 +0200
@@ -281,7 +281,7 @@
  * make sure "cyc" appears in all kernel messages; all soft interrupts
  * handled by same routine; recognize out-of-band reception; comment
  * out some diagnostic messages; leave RTS/CTS flow control to hardware;
- * fix race condition in -Z buffer management; only -Y needs to explictly
+ * fix race condition in -Z buffer management; only -Y needs to explicitly
  * flush chars; tidy up some startup messages;
  *
  * Revision 1.36.4.18  1996/07/25 18:57:31  bentson
--- linux-2.6.14-rc2.orig/drivers/scsi/mesh.c	2005-09-13 21:21:12.000000000 +0200
+++ linux-2.6.14-rc2/drivers/scsi/mesh.c	2005-09-25 17:02:25.000000000 +0200
@@ -730,7 +730,7 @@
 		 * issue a SEQ_MSGOUT to get the mesh to drop ACK.
 		 */
 		if ((in_8(&mr->bus_status0) & BS0_ATN) == 0) {
-			dlog(ms, "bus0 was %.2x explictly asserting ATN", mr->bus_status0);
+			dlog(ms, "bus0 was %.2x explicitly asserting ATN", mr->bus_status0);
 			out_8(&mr->bus_status0, BS0_ATN); /* explicit ATN */
 			mesh_flush_io(mr);
 			udelay(1);


-- 
Jean Delvare