3Ware and 2.6.14, problem resurrected

3Ware and 2.6.14, problem resurrected

[subbie subbie]

The problem introduced in 2.6.12-mm2 as described
below appears to have resurfaced in the latest kernel,
2.6.14.

3ware 9000 Storage Controller device driver for Linux
v2.26.03.019fw.
ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 48 (level,
low) -> IRQ 18
scsi3 : 3ware 9000 Storage Controller
3w-9xxx: scsi3: Found a 3ware 9000 Storage Controller
at 0xfceffc00, IRQ: 18.
3w-9xxx: scsi3: Firmware FE9X 2.08.00.003, BIOS BE9X
2.03.01.052, Ports: 12.
  Vendor:           Model:                   Rev:     
  Type:   Direct-Access                      ANSI SCSI
revision: 00
sdb : sector size 0 reported, assuming 512.
SCSI device sdb: 1 512-byte hdwr sectors (0 MB)
sdb: asking for cache data failed
sdb: assuming drive cache: write through
sdb : sector size 0 reported, assuming 512.
SCSI device sdb: 1 512-byte hdwr sectors (0 MB)
sdb: asking for cache data failed
sdb: assuming drive cache: write through
 sdb: unknown partition table
Attached scsi disk sdb at scsi3, channel 0, id 0, lun
0
Attached scsi generic sg1 at scsi3, channel 0, id 0,
lun 0,  type 0

For a full description, view below

http://lkml.org/lkml/2005/6/26/83

Thanks


	
		
__________________________________ 
Yahoo! Mail - PC Magazine Editors' Choice 2005 
http://mail.yahoo.com

Re: 3Ware and 2.6.14, problem resurrected

[adam radford]

On 11/10/05, subbie subbie <subbie_subbie@yahoo.com> wrote:
> The problem introduced in 2.6.12-mm2 as described
> below appears to have resurfaced in the latest kernel,
> 2.6.14.

The driver you are running from the 3ware website does not have the fix
for this in it.  Please reproduce with the in-kernel v2.26.02.004 driver or
download the 9.3.0.1 driver for 9550SX from the 3ware website, it is backward
compatible to all 9000 series cards.

-Adam