Re: vmlinuz-2.6.16-rc5-git8 still nogo with Intel D945 Motherboard

["Randy.Dunlap" <rdunlap@xenotime.net>]

On Tue, 07 Mar 2006 11:20:28 -0700 Reg Clemens wrote:

> 
> > I meant, narrow it down by identifying the change that broke it.
> > "Somewhere between 2.6.11 and 2.6.15" is not helpful.
> 
> Yes, I can do that, but not till this evening.
> 
> > The HD (high-definition) audio driver works for me.
> > Are you using a vendor/distro kernel or roll-your-own?
> 
> Im building my own kernels.
> 
> > Maybe try the latest e1000 driver from
> >  http://sourceforge.net/projects/e1000/
> 
> Ill give that a shot, but again probably not till this evening.
> 
> > Can you post the complete boot log instead of one line of it?
> 
> Sure.
> In fact, Ill give you two, first the bad boot from 2.6.16, then a
> good boot from 1.6.11 just in case you need something to compare
> against.
> 
> Here they are, In the bad boot, the lines of interest are between
> lines 115 and 120, and start with PCI: Cannot and PCI: Failed .

Both boot logs contains the Cannot messages.
The "bad" log also contains:
Mar  7 10:58:41 deneb kernel: PCI: Failed to allocate mem resource #6:20000@48000000 for 0000:01:00.0

Is device 0:01:00.0 your Nvidia video card?
Is there an updated NVRM driver for it (guessing from your OK boot log)
for 2.6.15 or later?

I suppose an lspci might help.  I dunno.

---
~Randy