Re: vmlinuz-2.6.16-rc5-git8 still nogo with Intel D945 Motherboard

[Reg Clemens <reg@dwf.com>]

> 
> Both boot logs contains the Cannot messages.

Hadn't noticed that, since it worked, I hadnt looked that carefully, sorry.

> The "bad" log also contains:
> Mar  7 10:58:41 deneb kernel: PCI: Failed to allocate mem resource #6:20000@48000000 for 0000:01:00.0
> 

Yep.

> Is device 0:01:00.0 your Nvidia video card?
> Is there an updated NVRM driver for it (guessing from your OK boot log)
> for 2.6.15 or later?

Yes, I am running with the NVIDIA
    NVIDIA-Linux-x86-1.0-6629-pkg1.run
driver, tho the 'nv' in the system works.

> 
> I suppose an lspci might help.  I dunno.

---

Here is the lspci, run from 2.6.11, but I dont think that should matter...

[root@deneb reg]# /sbin/lspci
00:00.0 Host bridge: Intel Corporation 945G/P Memory Controller Hub (rev 02)
00:01.0 PCI bridge: Intel Corporation 945G/P PCI Express Graphics Port (rev 02)
00:1b.0 Class 0403: Intel Corporation 82801G (ICH7 Family) High Definition 
Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 
(rev 01)
00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 
(rev 01)
00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 
(rev 01)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 
(rev 01)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 
(rev 01)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 
(rev 01)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 
(rev 01)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI 
Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface 
Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller 
(rev 01)
00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) Serial 
ATA Storage Controllers cc=IDE (rev 01)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)
01:00.0 VGA compatible controller: nVidia Corporation NV43 [GeForce 6600] (rev 
a2)
05:01.0 SCSI storage controller: LSI Logic / Symbios Logic 53c875 (rev 04)
05:02.0 Multimedia audio controller: Creative Labs SB Audigy LS
05:03.0 Ethernet controller: D-Link System Inc Gigabit Ethernet Adapter (rev 
11)

---

Did you notice that the following three pnp messages talk about the same
memory ranges, but different devices (5 vs 6), 

Mar  7 11:02:21 deneb kernel: PCI: Cannot allocate resource region 1 of device 
0000:05:01.0
Mar  7 11:02:21 deneb kernel: PCI: Cannot allocate resource region 2 of device 
0000:05:01.0
Mar  7 11:02:21 deneb kernel: pnp: 00:05: ioport range 0x500-0x53f has been 
reserved
Mar  7 11:02:21 deneb kernel: pnp: 00:05: ioport range 0x400-0x47f could not 
be reserved
Mar  7 11:02:21 deneb kernel: pnp: 00:05: ioport range 0x680-0x6ff has been 
reserved

---

Mar  7 10:58:41 deneb kernel: PCI: Cannot allocate resource region 1 of device 
0000:05:01.0
Mar  7 10:58:41 deneb kernel: PCI: Cannot allocate resource region 2 of device 
0000:05:01.0
Mar  7 10:58:41 deneb kernel: pnp: 00:06: ioport range 0x500-0x53f has been 
reserved
Mar  7 10:58:41 deneb kernel: pnp: 00:06: ioport range 0x400-0x47f could not 
be reserved
Mar  7 10:58:41 deneb kernel: pnp: 00:06: ioport range 0x680-0x6ff has been 
reserved
Mar  7 10:58:41 deneb kernel: PCI: Failed to allocate mem resource 
#6:20000@48000000 for 0000:01:00.0

-- 
Im not sure what the significance of that is, just noticed the difference.


                                      Reg.Clemens
                                        reg@dwf.com