* RE: [PATCH 1/1] net driver: Add support for SMSC LAN911x line of ethernet chips
2006-04-18 5:13 ` [PATCH 1/1] net driver: Add support for SMSC LAN911x line of ethernet chips Andrew Morton
@ 2006-04-20 3:24 ` Dustin McIntire
0 siblings, 0 replies; 2+ messages in thread
From: Dustin McIntire @ 2006-04-20 3:24 UTC (permalink / raw)
To: 'Andrew Morton'; +Cc: jgarzik, linux-kernel
>
> The patch was badly wordwrapped. Please fix and resend.
>
OK, I've fixed the wrapping and removed the CONFIG_ARM restriction. I've also did my
best to modify the C style to conform to the comments.
I noticed that the patch is getting ignored by majordomo due to its size >100K.
Should it be broken up somehow to allow posting to the lists?
Signed-off-by: Dustin McIntire <dustin@sensoria.com>
diff -rNup linux-2.6.16.1.orig/drivers/net/Kconfig linux-2.6.16.1/drivers/net/Kconfig
--- linux-2.6.16.1.orig/drivers/net/Kconfig 2006-03-27 22:49:02.000000000 -0800
+++ linux-2.6.16.1/drivers/net/Kconfig 2006-04-18 09:25:23.000000000 -0700
@@ -865,6 +865,22 @@ config DM9000
<file:Documentation/networking/net-modules.txt>. The module will be
called dm9000.
+config SMC911X
+ tristate "SMSC LAN911[5678] support"
+ select CRC32
+ select MII
+ depends on NET_ETHERNET
+ help
+ This is a driver for SMSC's LAN911x series of Ethernet chipsets
+ including the new LAN9115, LAN9116, LAN9117, and LAN9118.
+ Say Y if you want it compiled into the kernel,
+ and read the Ethernet-HOWTO, available from
+ <http://www.linuxdoc.org/docs.html#howto>.
+
+ This driver is also available as a module. The module will be
+ called smc911x. If you want to compile it as a module, say M
+ here and read <file:Documentation/modules.txt>
+
config NET_VENDOR_RACAL
bool "Racal-Interlan (Micom) NI cards"
depends on NET_ETHERNET && ISA
diff -rNup linux-2.6.16.1.orig/drivers/net/Makefile linux-2.6.16.1/drivers/net/Makefile
--- linux-2.6.16.1.orig/drivers/net/Makefile 2006-03-27 22:49:02.000000000 -0800
+++ linux-2.6.16.1/drivers/net/Makefile 2006-04-18 09:23:05.000000000 -0700
@@ -193,6 +193,7 @@ obj-$(CONFIG_AMD8111_ETH) += amd8111e.o
obj-$(CONFIG_IBMVETH) += ibmveth.o
obj-$(CONFIG_S2IO) += s2io.o
obj-$(CONFIG_SMC91X) += smc91x.o
+obj-$(CONFIG_SMC911X) += smc911x.o
obj-$(CONFIG_DM9000) += dm9000.o
obj-$(CONFIG_FEC_8XX) += fec_8xx/
diff -rNup linux-2.6.16.1.orig/drivers/net/smc911x.c linux-2.6.16.1/drivers/net/smc911x.c
--- linux-2.6.16.1.orig/drivers/net/smc911x.c 1969-12-31 16:00:00.000000000 -0800
+++ linux-2.6.16.1/drivers/net/smc911x.c 2006-04-18 09:45:22.000000000 -0700
@@ -0,0 +1,2307 @@
+/*
+ * smc911x.c
+ * This is a driver for SMSC's LAN911{5,6,7,8} single-chip Ethernet devices.
+ *
+ * Copyright (C) 2005 Sensoria Corp
+ * Derived from the unified SMC91x driver by Nicolas Pitre
+ * and the smsc911x.c reference driver by SMSC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Arguments:
+ * watchdog = TX watchdog timeout
+ * tx_fifo_kb = Size of TX FIFO in KB
+ *
+ * History:
+ * 04/16/05 Dustin McIntire Initial version
+ */
+static const char version[] =
+ "smc911x.c: v1.0 04-16-2005 by Dustin McIntire <dustin@sensoria.com>\n";
+
+/* Debugging options */
+#define ENABLE_SMC_DEBUG_RX 0
+#define ENABLE_SMC_DEBUG_TX 0
+#define ENABLE_SMC_DEBUG_DMA 0
+#define ENABLE_SMC_DEBUG_PKTS 0
+#define ENABLE_SMC_DEBUG_MISC 0
+#define ENABLE_SMC_DEBUG_FUNC 0
+
+#define SMC_DEBUG_RX ((ENABLE_SMC_DEBUG_RX ? 1 : 0) << 0)
+#define SMC_DEBUG_TX ((ENABLE_SMC_DEBUG_TX ? 1 : 0) << 1)
+#define SMC_DEBUG_DMA ((ENABLE_SMC_DEBUG_DMA ? 1 : 0) << 2)
+#define SMC_DEBUG_PKTS ((ENABLE_SMC_DEBUG_PKTS ? 1 : 0) << 3)
+#define SMC_DEBUG_MISC ((ENABLE_SMC_DEBUG_MISC ? 1 : 0) << 4)
+#define SMC_DEBUG_FUNC ((ENABLE_SMC_DEBUG_FUNC ? 1 : 0) << 5)
+
+#ifndef SMC_DEBUG
+#define SMC_DEBUG ( SMC_DEBUG_RX | \
+ SMC_DEBUG_TX | \
+ SMC_DEBUG_DMA | \
+ SMC_DEBUG_PKTS | \
+ SMC_DEBUG_MISC | \
+ SMC_DEBUG_FUNC \
+ )
+#endif
+
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/crc32.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <linux/ethtool.h>
+#include <linux/mii.h>
+#include <linux/workqueue.h>
+
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+
+#include "smc911x.h"
+
+/*
+ * Transmit timeout, default 5 seconds.
+ */
+static int watchdog = 5000;
+module_param(watchdog, int, 0400);
+MODULE_PARM_DESC(watchdog, "transmit timeout in milliseconds");
+
+static int tx_fifo_kb=8;
+module_param(tx_fifo_kb, int, 0400);
+MODULE_PARM_DESC(tx_fifo_kb,"transmit FIFO size in KB (1<x<15)(default=8)");
+
+MODULE_LICENSE("GPL");
+
+/*
+ * The internal workings of the driver. If you are changing anything
+ * here with the SMC stuff, you should have the datasheet and know
+ * what you are doing.
+ */
+#define CARDNAME "smc911x"
+
+/*
+ * Use power-down feature of the chip
+ */
+#define POWER_DOWN 1
+
+
+/* store this information for the driver.. */
+struct smc911x_local {
+ /*
+ * If I have to wait until the DMA is finished and ready to reload a
+ * packet, I will store the skbuff here. Then, the DMA will send it
+ * out and free it.
+ */
+ struct sk_buff *pending_tx_skb;
+
+ /*
+ * these are things that the kernel wants me to keep, so users
+ * can find out semi-useless statistics of how well the card is
+ * performing
+ */
+ struct net_device_stats stats;
+
+ /* version/revision of the SMC911x chip */
+ u16 version;
+ u16 revision;
+
+ /* FIFO sizes */
+ int tx_fifo_kb;
+ int tx_fifo_size;
+ int rx_fifo_size;
+ int afc_cfg;
+
+ /* Contains the current active receive/phy mode */
+ int ctl_rfduplx;
+ int ctl_rspeed;
+
+ u32 msg_enable;
+ u32 phy_type;
+ struct mii_if_info mii;
+
+ /* work queue */
+ struct work_struct phy_configure;
+ int work_pending;
+
+ int tx_throttle;
+ spinlock_t lock;
+
+#ifdef SMC_USE_DMA
+ /* DMA needs the physical address of the chip */
+ u_long physaddr;
+ int rxdma;
+ int txdma;
+ int rxdma_active;
+ int txdma_active;
+ struct sk_buff *current_rx_skb;
+ struct sk_buff *current_tx_skb;
+ struct device *dev;
+#endif
+};
+
+#if SMC_DEBUG > 0
+#define DBG(n, args...) \
+ do { \
+ if (SMC_DEBUG & (n)) \
+ printk(args); \
+ } while (0)
+
+#define PRINTK(args...) printk(args)
+#else
+#define DBG(n, args...) do { } while (0)
+#define PRINTK(args...) printk(KERN_DEBUG args)
+#endif
+
+#if SMC_DEBUG_PKTS > 0
+static void PRINT_PKT(u_char *buf, int length)
+{
+ int i;
+ int remainder;
+ int lines;
+
+ lines = length / 16;
+ remainder = length % 16;
+
+ for (i = 0; i < lines ; i ++) {
+ int cur;
+ for (cur = 0; cur < 8; cur++) {
+ u_char a, b;
+ a = *buf++;
+ b = *buf++;
+ printk("%02x%02x ", a, b);
+ }
+ printk("\n");
+ }
+ for (i = 0; i < remainder/2 ; i++) {
+ u_char a, b;
+ a = *buf++;
+ b = *buf++;
+ printk("%02x%02x ", a, b);
+ }
+ printk("\n");
+}
+#else
+#define PRINT_PKT(x...) do { } while (0)
+#endif
+
+
+/* this enables an interrupt in the interrupt mask register */
+#define SMC_ENABLE_INT(x) do { \
+ unsigned int __mask; \
+ unsigned long __flags; \
+ spin_lock_irqsave(&lp->lock, __flags); \
+ __mask = SMC_GET_INT_EN(); \
+ __mask |= (x); \
+ SMC_SET_INT_EN(__mask); \
+ spin_unlock_irqrestore(&lp->lock, __flags); \
+} while (0)
+
+/* this disables an interrupt from the interrupt mask register */
+#define SMC_DISABLE_INT(x) do { \
+ unsigned int __mask; \
+ unsigned long __flags; \
+ spin_lock_irqsave(&lp->lock, __flags); \
+ __mask = SMC_GET_INT_EN(); \
+ __mask &= ~(x); \
+ SMC_SET_INT_EN(__mask); \
+ spin_unlock_irqrestore(&lp->lock, __flags); \
+} while (0)
+
+/*
+ * this does a soft reset on the device
+ */
+static void smc911x_reset(struct net_device *dev)
+{
+ unsigned long ioaddr = dev->base_addr;
+ struct smc911x_local *lp = netdev_priv(dev);
+ unsigned int reg, timeout=0, resets=1;
+ unsigned long flags;
+
+ DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __FUNCTION__);
+
+ /* Take out of PM setting first */
+ if ((SMC_GET_PMT_CTRL() & PMT_CTRL_READY_) == 0) {
+ /* Write to the bytetest will take out of powerdown */
+ SMC_SET_BYTE_TEST(0);
+ timeout=10;
+ do {
+ udelay(10);
+ reg = SMC_GET_PMT_CTRL() & PMT_CTRL_READY_;
+ } while ( timeout-- && !reg);
+ if (timeout == 0) {
+ PRINTK("%s: smc911x_reset timeout waiting for PM restore\n", dev->name);
+ return;
+ }
+ }
+
+ /* Disable all interrupts */
+ spin_lock_irqsave(&lp->lock, flags);
+ SMC_SET_INT_EN(0);
+ spin_unlock_irqrestore(&lp->lock, flags);
+
+ while (resets--) {
+ SMC_SET_HW_CFG(HW_CFG_SRST_);
+ timeout=10;
+ do {
+ udelay(10);
+ reg = SMC_GET_HW_CFG();
+ /* If chip indicates reset timeout then try again */
+ if (reg & HW_CFG_SRST_TO_) {
+ PRINTK("%s: chip reset timeout, retrying...\n", dev->name);
+ resets++;
+ break;
+ }
+ } while ( timeout-- && (reg & HW_CFG_SRST_));
+ }
+ if (timeout == 0) {
+ PRINTK("%s: smc911x_reset timeout waiting for reset\n", dev->name);
+ return;
+ }
+
+ /* make sure EEPROM has finished loading before setting GPIO_CFG */
+ timeout=1000;
+ while ( timeout-- && (SMC_GET_E2P_CMD() & E2P_CMD_EPC_BUSY_)) {
+ udelay(10);
+ }
+ if (timeout == 0){
+ PRINTK("%s: smc911x_reset timeout waiting for EEPROM busy\n", dev->name);
+ return;
+ }
+
+ /* Initialize interrupts */
+ SMC_SET_INT_EN(0);
+ SMC_ACK_INT(-1);
+
+ /* Reset the FIFO level and flow control settings */
+ SMC_SET_HW_CFG((lp->tx_fifo_kb & 0xF) << 16);
+//TODO: Figure out what appropriate pause time is
+ SMC_SET_FLOW(FLOW_FCPT_ | FLOW_FCEN_);
+ SMC_SET_AFC_CFG(lp->afc_cfg);
+
+
+ /* Set to LED outputs */
+ SMC_SET_GPIO_CFG(0x70070000);
+
+ /*
+ * Deassert IRQ for 1*10us for edge type interrupts
+ * and drive IRQ pin push-pull
+ */
+ SMC_SET_IRQ_CFG( (1 << 24) | INT_CFG_IRQ_EN_ | INT_CFG_IRQ_TYPE_ );
+
+ /* clear anything saved */
+ if (lp->pending_tx_skb != NULL) {
+ dev_kfree_skb (lp->pending_tx_skb);
+ lp->pending_tx_skb = NULL;
+ lp->stats.tx_errors++;
+ lp->stats.tx_aborted_errors++;
+ }
+}
+
+/*
+ * Enable Interrupts, Receive, and Transmit
+ */
+static void smc911x_enable(struct net_device *dev)
+{
+ unsigned long ioaddr = dev->base_addr;
+ struct smc911x_local *lp = netdev_priv(dev);
+ unsigned mask, cfg, cr;
+ unsigned long flags;
+
+ DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __FUNCTION__);
+
+ SMC_SET_MAC_ADDR(dev->dev_addr);
+
+ /* Enable TX */
+ cfg = SMC_GET_HW_CFG();
+ cfg &= HW_CFG_TX_FIF_SZ_ | 0xFFF;
+ cfg |= HW_CFG_SF_;
+ SMC_SET_HW_CFG(cfg);
+ SMC_SET_FIFO_TDA(0xFF);
+ /* Update TX stats on every 64 packets received or every 1 sec */
+ SMC_SET_FIFO_TSL(64);
+ SMC_SET_GPT_CFG(GPT_CFG_TIMER_EN_ | 10000);
+
+ spin_lock_irqsave(&lp->lock, flags);
+ SMC_GET_MAC_CR(cr);
+ cr |= MAC_CR_TXEN_ | MAC_CR_HBDIS_;
+ SMC_SET_MAC_CR(cr);
+ SMC_SET_TX_CFG(TX_CFG_TX_ON_);
+ spin_unlock_irqrestore(&lp->lock, flags);
+
+ /* Add 2 byte padding to start of packets */
+ SMC_SET_RX_CFG((2<<8) & RX_CFG_RXDOFF_);
+
+ /* Turn on receiver and enable RX */
+ if (cr & MAC_CR_RXEN_)
+ DBG(SMC_DEBUG_RX, "%s: Receiver already enabled\n", dev->name);
+
+ spin_lock_irqsave(&lp->lock, flags);
+ SMC_SET_MAC_CR( cr | MAC_CR_RXEN_ );
+ spin_unlock_irqrestore(&lp->lock, flags);
+
+ /* Interrupt on every received packet */
+ SMC_SET_FIFO_RSA(0x01);
+ SMC_SET_FIFO_RSL(0x00);
+
+ /* now, enable interrupts */
+ mask = INT_EN_TDFA_EN_ | INT_EN_TSFL_EN_ | INT_EN_RSFL_EN_ |
+ INT_EN_GPT_INT_EN_ | INT_EN_RXDFH_INT_EN_ | INT_EN_RXE_EN_ |
+ INT_EN_PHY_INT_EN_;
+ if (IS_REV_A(lp->revision))
+ mask|=INT_EN_RDFL_EN_;
+ else {
+ mask|=INT_EN_RDFO_EN_;
+ }
+ SMC_ENABLE_INT(mask);
+}
+
+/*
+ * this puts the device in an inactive state
+ */
+static void smc911x_shutdown(struct net_device *dev)
+{
+ unsigned long ioaddr = dev->base_addr;
+ struct smc911x_local *lp = netdev_priv(dev);
+ unsigned cr;
+ unsigned long flags;
+
+ DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", CARDNAME, __FUNCTION__);
+
+ /* Disable IRQ's */
+ SMC_SET_INT_EN(0);
+
+ /* Turn of Rx and TX */
+ spin_lock_irqsave(&lp->lock, flags);
+ SMC_GET_MAC_CR(cr);
+ cr &= ~(MAC_CR_TXEN_ | MAC_CR_RXEN_ | MAC_CR_HBDIS_);
+ SMC_SET_MAC_CR(cr);
+ SMC_SET_TX_CFG(TX_CFG_STOP_TX_);
+ spin_unlock_irqrestore(&lp->lock, flags);
+}
+
+static inline void smc911x_drop_pkt(struct net_device *dev)
+{
+ unsigned long ioaddr = dev->base_addr;
+ unsigned int fifo_count, timeout, reg;
+
+ DBG(SMC_DEBUG_FUNC | SMC_DEBUG_RX, "%s: --> %s\n", CARDNAME, __FUNCTION__);
+ fifo_count = SMC_GET_RX_FIFO_INF() & 0xFFFF;
+ if (fifo_count <= 4) {
+ /* Manually dump the packet data */
+ while (fifo_count--)
+ SMC_GET_RX_FIFO();
+ } else {
+ /* Fast forward through the bad packet */
+ SMC_SET_RX_DP_CTRL(RX_DP_CTRL_FFWD_BUSY_);
+ timeout=50;
+ do {
+ udelay(10);
+ reg = SMC_GET_RX_DP_CTRL() & RX_DP_CTRL_FFWD_BUSY_;
+ } while ( timeout-- && reg);
+ if (timeout == 0) {
+ PRINTK("%s: timeout waiting for RX fast forward\n", dev->name);
+ }
+ }
+}
+
+/*
+ * This is the procedure to handle the receipt of a packet.
+ * It should be called after checking for packet presence in
+ * the RX status FIFO. It must be called with the spin lock
+ * already held.
+ */
+static inline void smc911x_rcv(struct net_device *dev)
+{
+ struct smc911x_local *lp = netdev_priv(dev);
+ unsigned long ioaddr = dev->base_addr;
+ unsigned int pkt_len, status;
+ struct sk_buff *skb;
+ unsigned char *data;
+
+ DBG(SMC_DEBUG_FUNC | SMC_DEBUG_RX, "%s: --> %s\n",
+ dev->name, __FUNCTION__);
+ status = SMC_GET_RX_STS_FIFO();
+ DBG(SMC_DEBUG_RX, "%s: Rx pkt len %d status 0x%08x \n",
+ dev->name, (status & 0x3fff0000) >> 16, status & 0xc000ffff);
+ pkt_len = (status & RX_STS_PKT_LEN_) >> 16;
+ if (status & RX_STS_ES_) {
+ /* Deal with a bad packet */
+ lp->stats.rx_errors++;
+ if (status & RX_STS_CRC_ERR_)
+ lp->stats.rx_crc_errors++;
+ else {
+ if (status & RX_STS_LEN_ERR_)
+ lp->stats.rx_length_errors++;
+ if (status & RX_STS_MCAST_)
+ lp->stats.multicast++;
+ }
+ /* Remove the bad packet data from the RX FIFO */
+ smc911x_drop_pkt(dev);
+ } else {
+ /* Receive a valid packet */
+ /* Alloc a buffer with extra room for DMA alignment */
+ skb=dev_alloc_skb(pkt_len+32);
+ if (unlikely(skb == NULL)) {
+ PRINTK( "%s: Low memory, rcvd packet dropped.\n",
+ dev->name);
+ lp->stats.rx_dropped++;
+ smc911x_drop_pkt(dev);
+ return;
+ }
+ /* Align IP header to 32 bits
+ * Note that the device is configured to add a 2
+ * byte padding to the packet start, so we really
+ * want to write to the orignal data pointer */
+ data = skb->data;
+ skb_reserve(skb, 2);
+ skb_put(skb,pkt_len-4);
+#ifdef SMC_USE_DMA
+ {
+ unsigned int fifo;
+ /* Lower the FIFO threshold if possible */
+ fifo = SMC_GET_FIFO_INT();
+ if (fifo & 0xFF) fifo--;
+ DBG(SMC_DEBUG_RX, "%s: Setting RX stat FIFO threshold to %d\n",
+ dev->name, fifo & 0xff);
+ SMC_SET_FIFO_INT(fifo);
+ /* Setup RX DMA */
+ SMC_SET_RX_CFG(RX_CFG_RX_END_ALGN16_ | ((2<<8) & RX_CFG_RXDOFF_));
+ lp->rxdma_active = 1;
+ lp->current_rx_skb = skb;
+ SMC_PULL_DATA(data, (pkt_len+2+15) & ~15);
+ /* Packet processing deferred to DMA RX interrupt */
+ }
+#else
+ SMC_SET_RX_CFG(RX_CFG_RX_END_ALGN4_ | ((2<<8) & RX_CFG_RXDOFF_));
+ SMC_PULL_DATA(data, pkt_len+2+3);
+
+ DBG(SMC_DEBUG_PKTS, "%s: Received packet\n", dev->name,);
+ PRINT_PKT(data, ((pkt_len - 4) <= 64) ? pkt_len - 4 : 64);
+ dev->last_rx = jiffies;
+ skb->dev = dev;
+ skb->protocol = eth_type_trans(skb, dev);
+ netif_rx(skb);
+ lp->stats.rx_packets++;
+ lp->stats.rx_bytes += pkt_len-4;
+#endif
+ }
+}
+
+/*
+ * This is called to actually send a packet to the chip.
+ */
+static void smc911x_hardware_send_pkt(struct net_device *dev)
+{
+ struct smc911x_local *lp = netdev_priv(dev);
+ unsigned long ioaddr = dev->base_addr;
+ struct sk_buff *skb;
+ unsigned int cmdA, cmdB, len;
+ unsigned char *buf;
+ unsigned long flags;
+
+ DBG(SMC_DEBUG_FUNC | SMC_DEBUG_TX, "%s: --> %s\n", dev->name, __FUNCTION__);
+ BUG_ON(lp->pending_tx_skb == NULL);
+
+ skb = lp->pending_tx_skb;
+ lp->pending_tx_skb = NULL;
+
+ /* cmdA {25:24] data alignment [20:16] start offset [10:0] buffer length */
+ /* cmdB {31:16] pkt tag [10:0] length */
+#ifdef SMC_USE_DMA
+ /* 16 byte buffer alignment mode */
+ buf = (char*)((u32)(skb->data) & ~0xF);
+ len = (skb->len + 0xF + ((u32)skb->data & 0xF)) & ~0xF;
+ cmdA = (1<<24) | (((u32)skb->data & 0xF)<<16) |
+ TX_CMD_A_INT_FIRST_SEG_ | TX_CMD_A_INT_LAST_SEG_ |
+ skb->len;
+#else
+ buf = (char*)((u32)skb->data & ~0x3);
+ len = (skb->len + 3 + ((u32)skb->data & 3)) & ~0x3;
+ cmdA = (((u32)skb->data & 0x3) << 16) |
+ TX_CMD_A_INT_FIRST_SEG_ | TX_CMD_A_INT_LAST_SEG_ |
+ skb->len;
+#endif
+ /* tag is packet length so we can use this in stats update later */
+ cmdB = (skb->len << 16) | (skb->len & 0x7FF);
+
+ DBG(SMC_DEBUG_TX, "%s: TX PKT LENGTH 0x%04x (%d) BUF 0x%p CMDA 0x%08x CMDB 0x%08x\n",
+ dev->name, len, len, buf, cmdA, cmdB);
+ SMC_SET_TX_FIFO(cmdA);
+ SMC_SET_TX_FIFO(cmdB);
+
+ DBG(SMC_DEBUG_PKTS, "%s: Transmitted packet\n", dev->name);
+ PRINT_PKT(buf, len <= 64 ? len : 64);
+
+ /* Send pkt via PIO or DMA */
+#ifdef SMC_USE_DMA
+ lp->current_tx_skb = skb;
+ SMC_PUSH_DATA(buf, len);
+ /* DMA complete IRQ will free buffer and set jiffies */
+#else
+ SMC_PUSH_DATA(buf, len);
+ dev->trans_start = jiffies;
+ dev_kfree_skb(skb);
+#endif
+ spin_lock_irqsave(&lp->lock, flags);
+ if (!lp->tx_throttle) {
+ netif_wake_queue(dev);
+ }
+ spin_unlock_irqrestore(&lp->lock, flags);
+ SMC_ENABLE_INT(INT_EN_TDFA_EN_ | INT_EN_TSFL_EN_);
+}
+
+/*
+ * Since I am not sure if I will have enough room in the chip's ram
+ * to store the packet, I call this routine which either sends it
+ * now, or set the card to generates an interrupt when ready
+ * for the packet.
+ */
+static int smc911x_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ struct smc911x_local *lp = netdev_priv(dev);
+ unsigned long ioaddr = dev->base_addr;
+ unsigned int free;
+ unsigned long flags;
+
+ DBG(SMC_DEBUG_FUNC | SMC_DEBUG_TX, "%s: --> %s\n",
+ dev->name, __FUNCTION__);
+
+ BUG_ON(lp->pending_tx_skb != NULL);
+
+ free = SMC_GET_TX_FIFO_INF() & TX_FIFO_INF_TDFREE_;
+ DBG(SMC_DEBUG_TX, "%s: TX free space %d\n", dev->name, free);
+
+ /* Turn off the flow when running out of space in FIFO */
+ if (free <= SMC911X_TX_FIFO_LOW_THRESHOLD) {
+ DBG(SMC_DEBUG_TX, "%s: Disabling data flow due to low FIFO space (%d)\n",
+ dev->name, free);
+ spin_lock_irqsave(&lp->lock, flags);
+ /* Reenable when at least 1 packet of size MTU present */
+ SMC_SET_FIFO_TDA((SMC911X_TX_FIFO_LOW_THRESHOLD)/64);
+ lp->tx_throttle = 1;
+ netif_stop_queue(dev);
+ spin_unlock_irqrestore(&lp->lock, flags);
+ }
+
+ /* Drop packets when we run out of space in TX FIFO
+ * Account for overhead required for:
+ *
+ * Tx command words 8 bytes
+ * Start offset 15 bytes
+ * End padding 15 bytes
+ */
+ if (unlikely(free < (skb->len + 8 + 15 + 15))) {
+ printk("%s: No Tx free space %d < %d\n",
+ dev->name, free, skb->len);
+ lp->pending_tx_skb = NULL;
+ lp->stats.tx_errors++;
+ lp->stats.tx_dropped++;
+ dev_kfree_skb(skb);
+ return 0;
+ }
+
+#ifdef SMC_USE_DMA
+ {
+ /* If the DMA is already running then defer this packet Tx until
+ * the DMA IRQ starts it
+ */
+ spin_lock_irqsave(&lp->lock, flags);
+ if (lp->txdma_active) {
+ DBG(SMC_DEBUG_TX | SMC_DEBUG_DMA, "%s: Tx DMA running, deferring packet\n", dev->name);
+ lp->pending_tx_skb = skb;
+ netif_stop_queue(dev);
+ spin_unlock_irqrestore(&lp->lock, flags);
+ return 0;
+ } else {
+ DBG(SMC_DEBUG_TX | SMC_DEBUG_DMA, "%s: Activating Tx DMA\n", dev->name);
+ lp->txdma_active = 1;
+ }
+ spin_unlock_irqrestore(&lp->lock, flags);
+ }
+#endif
+ lp->pending_tx_skb = skb;
+ smc911x_hardware_send_pkt(dev);
+
+ return 0;
+}
+
+/*
+ * This handles a TX status interrupt, which is only called when:
+ * - a TX error occurred, or
+ * - TX of a packet completed.
+ */
+static void smc911x_tx(struct net_device *dev)
+{
+ unsigned long ioaddr = dev->base_addr;
+ struct smc911x_local *lp = netdev_priv(dev);
+ unsigned int tx_status;
+
+ DBG(SMC_DEBUG_FUNC | SMC_DEBUG_TX, "%s: --> %s\n",
+ dev->name, __FUNCTION__);
+
+ /* Collect the TX status */
+ while (((SMC_GET_TX_FIFO_INF() & TX_FIFO_INF_TSUSED_) >> 16) != 0) {
+ DBG(SMC_DEBUG_TX, "%s: Tx stat FIFO used 0x%04x\n",
+ dev->name,
+ (SMC_GET_TX_FIFO_INF() & TX_FIFO_INF_TSUSED_) >> 16);
+ tx_status = SMC_GET_TX_STS_FIFO();
+ lp->stats.tx_packets++;
+ lp->stats.tx_bytes+=tx_status>>16;
+ DBG(SMC_DEBUG_TX, "%s: Tx FIFO tag 0x%04x status 0x%04x\n",
+ dev->name, (tx_status & 0xffff0000) >> 16,
+ tx_status & 0x0000ffff);
+ /* count Tx errors, but ignore lost carrier errors when in
+ * full-duplex mode */
+ if ((tx_status & TX_STS_ES_) && !(lp->ctl_rfduplx &&
+ !(tx_status & 0x00000306))) {
+ lp->stats.tx_errors++;
+ }
+ if (tx_status & TX_STS_MANY_COLL_) {
+ lp->stats.collisions+=16;
+ lp->stats.tx_aborted_errors++;
+ } else {
+ lp->stats.collisions+=(tx_status & TX_STS_COLL_CNT_) >> 3;
+ }
+ /* carrier error only has meaning for half-duplex communication */
+ if ((tx_status & (TX_STS_LOC_ | TX_STS_NO_CARR_)) &&
+ !lp->ctl_rfduplx) {
+ lp->stats.tx_carrier_errors++;
+ }
+ if (tx_status & TX_STS_LATE_COLL_) {
+ lp->stats.collisions++;
+ lp->stats.tx_aborted_errors++;
+ }
+ }
+}
+
+
+/*---PHY CONTROL AND CONFIGURATION-----------------------------------------*/
+/*
+ * Reads a register from the MII Management serial interface
+ */
+
+static int smc911x_phy_read(struct net_device *dev, int phyaddr, int phyreg)
+{
+ unsigned long ioaddr = dev->base_addr;
+ unsigned int phydata;
+
+ SMC_GET_MII(phyreg, phyaddr, phydata);
+
+ DBG(SMC_DEBUG_MISC, "%s: phyaddr=0x%x, phyreg=0x%02x, phydata=0x%04x\n",
+ __FUNCTION__, phyaddr, phyreg, phydata);
+ return phydata;
+}
+
+
+/*
+ * Writes a register to the MII Management serial interface
+ */
+static void smc911x_phy_write(struct net_device *dev, int phyaddr, int phyreg,
+ int phydata)
+{
+ unsigned long ioaddr = dev->base_addr;
+
+ DBG(SMC_DEBUG_MISC, "%s: phyaddr=0x%x, phyreg=0x%x, phydata=0x%x\n",
+ __FUNCTION__, phyaddr, phyreg, phydata);
+
+ SMC_SET_MII(phyreg, phyaddr, phydata);
+}
+
+/*
+ * Finds and reports the PHY address (115 and 117 have external
+ * PHY interface 118 has internal only
+ */
+static void smc911x_phy_detect(struct net_device *dev)
+{
+ unsigned long ioaddr = dev->base_addr;
+ struct smc911x_local *lp = netdev_priv(dev);
+ int phyaddr;
+ unsigned int cfg, id1, id2;
+
+ DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __FUNCTION__);
+
+ lp->phy_type = 0;
+
+ /*
+ * Scan all 32 PHY addresses if necessary, starting at
+ * PHY#1 to PHY#31, and then PHY#0 last.
+ */
+ switch(lp->version) {
+ case 0x115:
+ case 0x117:
+ cfg = SMC_GET_HW_CFG();
+ if (cfg & HW_CFG_EXT_PHY_DET_) {
+ cfg &= ~HW_CFG_PHY_CLK_SEL_;
+ cfg |= HW_CFG_PHY_CLK_SEL_CLK_DIS_;
+ SMC_SET_HW_CFG(cfg);
+ udelay(10); /* Wait for clocks to stop */
+
+ cfg |= HW_CFG_EXT_PHY_EN_;
+ SMC_SET_HW_CFG(cfg);
+ udelay(10); /* Wait for clocks to stop */
+
+ cfg &= ~HW_CFG_PHY_CLK_SEL_;
+ cfg |= HW_CFG_PHY_CLK_SEL_EXT_PHY_;
+ SMC_SET_HW_CFG(cfg);
+ udelay(10); /* Wait for clocks to stop */
+
+ cfg |= HW_CFG_SMI_SEL_;
+ SMC_SET_HW_CFG(cfg);
+
+ for (phyaddr = 1; phyaddr < 32; ++phyaddr) {
+
+ /* Read the PHY identifiers */
+ SMC_GET_PHY_ID1(phyaddr & 31, id1);
+ SMC_GET_PHY_ID2(phyaddr & 31, id2);
+
+ /* Make sure it is a valid identifier */
+ if (id1 != 0x0000 && id1 != 0xffff &&
+ id1 != 0x8000 && id2 != 0x0000 &&
+ id2 != 0xffff && id2 != 0x8000) {
+ /* Save the PHY's address */
+ lp->mii.phy_id = phyaddr & 31;
+ lp->phy_type = id1 << 16 | id2;
+ break;
+ }
+ }
+ }
+ default:
+ /* Internal media only */
+ SMC_GET_PHY_ID1(1, id1);
+ SMC_GET_PHY_ID2(1, id2);
+ /* Save the PHY's address */
+ lp->mii.phy_id = 1;
+ lp->phy_type = id1 << 16 | id2;
+ }
+
+ DBG(SMC_DEBUG_MISC, "%s: phy_id1=0x%x, phy_id2=0x%x phyaddr=0x%d\n",
+ dev->name, id1, id2, lp->mii.phy_id);
+}
+
+/*
+ * Sets the PHY to a configuration as determined by the user.
+ * Called with spin_lock held.
+ */
+static int smc911x_phy_fixed(struct net_device *dev)
+{
+ struct smc911x_local *lp = netdev_priv(dev);
+ unsigned long ioaddr = dev->base_addr;
+ int phyaddr = lp->mii.phy_id;
+ int bmcr;
+
+ DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __FUNCTION__);
+
+ /* Enter Link Disable state */
+ SMC_GET_PHY_BMCR(phyaddr, bmcr);
+ bmcr |= BMCR_PDOWN;
+ SMC_SET_PHY_BMCR(phyaddr, bmcr);
+
+ /*
+ * Set our fixed capabilities
+ * Disable auto-negotiation
+ */
+ bmcr &= ~BMCR_ANENABLE;
+ if (lp->ctl_rfduplx)
+ bmcr |= BMCR_FULLDPLX;
+
+ if (lp->ctl_rspeed == 100)
+ bmcr |= BMCR_SPEED100;
+
+ /* Write our capabilities to the phy control register */
+ SMC_SET_PHY_BMCR(phyaddr, bmcr);
+
+ /* Re-Configure the Receive/Phy Control register */
+ bmcr &= ~BMCR_PDOWN;
+ SMC_SET_PHY_BMCR(phyaddr, bmcr);
+
+ return 1;
+}
+
+/*
+ * smc911x_phy_reset - reset the phy
+ * @dev: net device
+ * @phy: phy address
+ *
+ * Issue a software reset for the specified PHY and
+ * wait up to 100ms for the reset to complete. We should
+ * not access the PHY for 50ms after issuing the reset.
+ *
+ * The time to wait appears to be dependent on the PHY.
+ *
+ */
+static int smc911x_phy_reset(struct net_device *dev, int phy)
+{
+ struct smc911x_local *lp = netdev_priv(dev);
+ unsigned long ioaddr = dev->base_addr;
+ int timeout;
+ unsigned long flags;
+ unsigned int reg;
+
+ DBG(SMC_DEBUG_FUNC, "%s: --> %s()\n", dev->name, __FUNCTION__);
+
+ spin_lock_irqsave(&lp->lock, flags);
+ reg = SMC_GET_PMT_CTRL();
+ reg &= ~0xfffff030;
+ reg |= PMT_CTRL_PHY_RST_;
+ SMC_SET_PMT_CTRL(reg);
+ spin_unlock_irqrestore(&lp->lock, flags);
+ for (timeout = 2; timeout; timeout--) {
+ msleep(50);
+ spin_lock_irqsave(&lp->lock, flags);
+ reg = SMC_GET_PMT_CTRL();
+ spin_unlock_irqrestore(&lp->lock, flags);
+ if (!(reg & PMT_CTRL_PHY_RST_)) {
+ /* extra delay required because the phy may
+ * not be completed with its reset
+ * when PHY_BCR_RESET_ is cleared. 256us
+ * should suffice, but use 500us to be safe
+ */
+ udelay(500);
+ break;
+ }
+ }
+
+ return reg & PMT_CTRL_PHY_RST_;
+}
+
+/*
+ * smc911x_phy_powerdown - powerdown phy
+ * @dev: net device
+ * @phy: phy address
+ *
+ * Power down the specified PHY
+ */
+static void smc911x_phy_powerdown(struct net_device *dev, int phy)
+{
+ unsigned long ioaddr = dev->base_addr;
+ unsigned int bmcr;
+
+ /* Enter Link Disable state */
+ SMC_GET_PHY_BMCR(phy, bmcr);
+ bmcr |= BMCR_PDOWN;
+ SMC_SET_PHY_BMCR(phy, bmcr);
+}
+
+/*
+ * smc911x_phy_check_media - check the media status and adjust BMCR
+ * @dev: net device
+ * @init: set true for initialisation
+ *
+ * Select duplex mode depending on negotiation state. This
+ * also updates our carrier state.
+ */
+static void smc911x_phy_check_media(struct net_device *dev, int init)
+{
+ struct smc911x_local *lp = netdev_priv(dev);
+ unsigned long ioaddr = dev->base_addr;
+ int phyaddr = lp->mii.phy_id;
+ unsigned int bmcr, cr;
+
+ DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __FUNCTION__);
+
+ if (mii_check_media(&lp->mii, netif_msg_link(lp), init)) {
+ /* duplex state has changed */
+ SMC_GET_PHY_BMCR(phyaddr, bmcr);
+ SMC_GET_MAC_CR(cr);
+ if (lp->mii.full_duplex) {
+ DBG(SMC_DEBUG_MISC, "%s: Configuring for full-duplex mode\n", dev->name);
+ bmcr |= BMCR_FULLDPLX;
+ cr |= MAC_CR_RCVOWN_;
+ } else {
+ DBG(SMC_DEBUG_MISC, "%s: Configuring for half-duplex mode\n", dev->name);
+ bmcr &= ~BMCR_FULLDPLX;
+ cr &= ~MAC_CR_RCVOWN_;
+ }
+ SMC_SET_PHY_BMCR(phyaddr, bmcr);
+ SMC_SET_MAC_CR(cr);
+ }
+}
+
+/*
+ * Configures the specified PHY through the MII management interface
+ * using Autonegotiation.
+ * Calls smc911x_phy_fixed() if the user has requested a certain config.
+ * If RPC ANEG bit is set, the media selection is dependent purely on
+ * the selection by the MII (either in the MII BMCR reg or the result
+ * of autonegotiation.) If the RPC ANEG bit is cleared, the selection
+ * is controlled by the RPC SPEED and RPC DPLX bits.
+ */
+static void smc911x_phy_configure(void *data)
+{
+ struct net_device *dev = data;
+ struct smc911x_local *lp = netdev_priv(dev);
+ unsigned long ioaddr = dev->base_addr;
+ int phyaddr = lp->mii.phy_id;
+ int my_phy_caps; /* My PHY capabilities */
+ int my_ad_caps; /* My Advertised capabilities */
+ int status;
+ unsigned long flags;
+
+ DBG(SMC_DEBUG_FUNC, "%s: --> %s()\n", dev->name, __FUNCTION__);
+
+ /*
+ * We should not be called if phy_type is zero.
+ */
+ if (lp->phy_type == 0)
+ goto smc911x_phy_configure_exit;
+
+ if (smc911x_phy_reset(dev, phyaddr)) {
+ printk("%s: PHY reset timed out\n", dev->name);
+ goto smc911x_phy_configure_exit;
+ }
+ spin_lock_irqsave(&lp->lock, flags);
+
+ /*
+ * Enable PHY Interrupts (for register 18)
+ * Interrupts listed here are enabled
+ */
+ SMC_SET_PHY_INT_MASK(phyaddr, PHY_INT_MASK_ENERGY_ON_ |
+ PHY_INT_MASK_ANEG_COMP_ | PHY_INT_MASK_REMOTE_FAULT_ |
+ PHY_INT_MASK_LINK_DOWN_);
+
+ /* If the user requested no auto neg, then go set his request */
+ if (lp->mii.force_media) {
+ smc911x_phy_fixed(dev);
+ goto smc911x_phy_configure_exit;
+ }
+
+ /* Copy our capabilities from MII_BMSR to MII_ADVERTISE */
+ SMC_GET_PHY_BMSR(phyaddr, my_phy_caps);
+ if (!(my_phy_caps & BMSR_ANEGCAPABLE)) {
+ printk(KERN_INFO "Auto negotiation NOT supported\n");
+ smc911x_phy_fixed(dev);
+ goto smc911x_phy_configure_exit;
+ }
+
+ /* CSMA capable w/ both pauses */
+ my_ad_caps = ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM;
+
+ if (my_phy_caps & BMSR_100BASE4)
+ my_ad_caps |= ADVERTISE_100BASE4;
+ if (my_phy_caps & BMSR_100FULL)
+ my_ad_caps |= ADVERTISE_100FULL;
+ if (my_phy_caps & BMSR_100HALF)
+ my_ad_caps |= ADVERTISE_100HALF;
+ if (my_phy_caps & BMSR_10FULL)
+ my_ad_caps |= ADVERTISE_10FULL;
+ if (my_phy_caps & BMSR_10HALF)
+ my_ad_caps |= ADVERTISE_10HALF;
+
+ /* Disable capabilities not selected by our user */
+ if (lp->ctl_rspeed != 100)
+ my_ad_caps &= ~(ADVERTISE_100BASE4|ADVERTISE_100FULL|ADVERTISE_100HALF);
+
+ if (!lp->ctl_rfduplx)
+ my_ad_caps &= ~(ADVERTISE_100FULL|ADVERTISE_10FULL);
+
+ /* Update our Auto-Neg Advertisement Register */
+ SMC_SET_PHY_MII_ADV(phyaddr, my_ad_caps);
+ lp->mii.advertising = my_ad_caps;
+
+ /*
+ * Read the register back. Without this, it appears that when
+ * auto-negotiation is restarted, sometimes it isn't ready and
+ * the link does not come up.
+ */
+ udelay(10);
+ SMC_GET_PHY_MII_ADV(phyaddr, status);
+
+ DBG(SMC_DEBUG_MISC, "%s: phy caps=0x%04x\n", dev->name, my_phy_caps);
+ DBG(SMC_DEBUG_MISC, "%s: phy advertised caps=0x%04x\n", dev->name, my_ad_caps);
+
+ /* Restart auto-negotiation process in order to advertise my caps */
+ SMC_SET_PHY_BMCR(phyaddr, BMCR_ANENABLE | BMCR_ANRESTART);
+
+ smc911x_phy_check_media(dev, 1);
+
+smc911x_phy_configure_exit:
+ spin_unlock_irqrestore(&lp->lock, flags);
+ lp->work_pending = 0;
+}
+
+/*
+ * smc911x_phy_interrupt
+ *
+ * Purpose: Handle interrupts relating to PHY register 18. This is
+ * called from the "hard" interrupt handler under our private spinlock.
+ */
+static void smc911x_phy_interrupt(struct net_device *dev)
+{
+ struct smc911x_local *lp = netdev_priv(dev);
+ unsigned long ioaddr = dev->base_addr;
+ int phyaddr = lp->mii.phy_id;
+ int status;
+
+ DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __FUNCTION__);
+
+ if (lp->phy_type == 0)
+ return;
+
+ smc911x_phy_check_media(dev, 0);
+ /* read to clear status bits */
+ SMC_GET_PHY_INT_SRC(phyaddr,status);
+ DBG(SMC_DEBUG_MISC, "%s: PHY interrupt status 0x%04x\n",
+ dev->name, status & 0xffff);
+ DBG(SMC_DEBUG_MISC, "%s: AFC_CFG 0x%08x\n",
+ dev->name, SMC_GET_AFC_CFG());
+}
+
+/*--- END PHY CONTROL AND CONFIGURATION-------------------------------------*/
+
+/*
+ * This is the main routine of the driver, to handle the device when
+ * it needs some attention.
+ */
+static irqreturn_t smc911x_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct net_device *dev = dev_id;
+ unsigned long ioaddr = dev->base_addr;
+ struct smc911x_local *lp = netdev_priv(dev);
+ unsigned int status, mask, timeout;
+ unsigned int rx_overrun=0, cr, pkts;
+ unsigned long flags;
+
+ DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __FUNCTION__);
+
+ spin_lock_irqsave(&lp->lock, flags);
+
+ /* Spurious interrupt check */
+ if ((SMC_GET_IRQ_CFG() & (INT_CFG_IRQ_INT_ | INT_CFG_IRQ_EN_)) !=
+ (INT_CFG_IRQ_INT_ | INT_CFG_IRQ_EN_)) {
+ return IRQ_NONE;
+ }
+
+ mask = SMC_GET_INT_EN();
+ SMC_SET_INT_EN(0);
+
+ /* set a timeout value, so I don't stay here forever */
+ timeout = 8;
+
+
+ do {
+ status = SMC_GET_INT();
+
+ DBG(SMC_DEBUG_MISC, "%s: INT 0x%08x MASK 0x%08x OUTSIDE MASK 0x%08x\n",
+ dev->name, status, mask, status & ~mask);
+
+ status &= mask;
+ if (!status)
+ break;
+
+ /* Handle SW interrupt condition */
+ if (status & INT_STS_SW_INT_) {
+ SMC_ACK_INT(INT_STS_SW_INT_);
+ mask &= ~INT_EN_SW_INT_EN_;
+ }
+ /* Handle various error conditions */
+ if (status & INT_STS_RXE_) {
+ SMC_ACK_INT(INT_STS_RXE_);
+ lp->stats.rx_errors++;
+ }
+ if (status & INT_STS_RXDFH_INT_) {
+ SMC_ACK_INT(INT_STS_RXDFH_INT_);
+ lp->stats.rx_dropped+=SMC_GET_RX_DROP();
+ }
+ /* Undocumented interrupt-what is the right thing to do here? */
+ if (status & INT_STS_RXDF_INT_) {
+ SMC_ACK_INT(INT_STS_RXDF_INT_);
+ }
+
+ /* Rx Data FIFO exceeds set level */
+ if (status & INT_STS_RDFL_) {
+ if (IS_REV_A(lp->revision)) {
+ rx_overrun=1;
+ SMC_GET_MAC_CR(cr);
+ cr &= ~MAC_CR_RXEN_;
+ SMC_SET_MAC_CR(cr);
+ DBG(SMC_DEBUG_RX, "%s: RX overrun\n", dev->name);
+ lp->stats.rx_errors++;
+ lp->stats.rx_fifo_errors++;
+ }
+ SMC_ACK_INT(INT_STS_RDFL_);
+ }
+ if (status & INT_STS_RDFO_) {
+ if (!IS_REV_A(lp->revision)) {
+ SMC_GET_MAC_CR(cr);
+ cr &= ~MAC_CR_RXEN_;
+ SMC_SET_MAC_CR(cr);
+ rx_overrun=1;
+ DBG(SMC_DEBUG_RX, "%s: RX overrun\n", dev->name);
+ lp->stats.rx_errors++;
+ lp->stats.rx_fifo_errors++;
+ }
+ SMC_ACK_INT(INT_STS_RDFO_);
+ }
+ /* Handle receive condition */
+ if ((status & INT_STS_RSFL_) || rx_overrun) {
+ unsigned int fifo;
+ DBG(SMC_DEBUG_RX, "%s: RX irq\n", dev->name);
+ fifo = SMC_GET_RX_FIFO_INF();
+ pkts = (fifo & RX_FIFO_INF_RXSUSED_) >> 16;
+ DBG(SMC_DEBUG_RX, "%s: Rx FIFO pkts %d, bytes %d\n",
+ dev->name, pkts, fifo & 0xFFFF );
+ if (pkts != 0) {
+#ifdef SMC_USE_DMA
+ unsigned int fifo;
+ if (lp->rxdma_active){
+ DBG(SMC_DEBUG_RX | SMC_DEBUG_DMA,
+ "%s: RX DMA active\n", dev->name);
+ /* The DMA is already running so up the IRQ threshold */
+ fifo = SMC_GET_FIFO_INT() & ~0xFF;
+ fifo |= pkts & 0xFF;
+ DBG(SMC_DEBUG_RX,
+ "%s: Setting RX stat FIFO threshold to %d\n",
+ dev->name, fifo & 0xff);
+ SMC_SET_FIFO_INT(fifo);
+ } else
+#endif
+ smc911x_rcv(dev);
+ }
+ SMC_ACK_INT(INT_STS_RSFL_);
+ }
+ /* Handle transmit FIFO available */
+ if (status & INT_STS_TDFA_) {
+ DBG(SMC_DEBUG_TX, "%s: TX data FIFO space available irq\n", dev->name);
+ SMC_SET_FIFO_TDA(0xFF);
+ lp->tx_throttle = 0;
+#ifdef SMC_USE_DMA
+ if (!lp->txdma_active)
+#endif
+ netif_wake_queue(dev);
+ SMC_ACK_INT(INT_STS_TDFA_);
+ }
+ /* Handle transmit done condition */
+#if 1
+ if (status & (INT_STS_TSFL_ | INT_STS_GPT_INT_)) {
+ DBG(SMC_DEBUG_TX | SMC_DEBUG_MISC,
+ "%s: Tx stat FIFO limit (%d) /GPT irq\n",
+ dev->name, (SMC_GET_FIFO_INT() & 0x00ff0000) >> 16);
+ smc911x_tx(dev);
+ SMC_SET_GPT_CFG(GPT_CFG_TIMER_EN_ | 10000);
+ SMC_ACK_INT(INT_STS_TSFL_);
+ SMC_ACK_INT(INT_STS_TSFL_ | INT_STS_GPT_INT_);
+ }
+#else
+ if (status & INT_STS_TSFL_) {
+ DBG(SMC_DEBUG_TX, "%s: TX status FIFO limit (%d) irq \n", dev->name, );
+ smc911x_tx(dev);
+ SMC_ACK_INT(INT_STS_TSFL_);
+ }
+
+ if (status & INT_STS_GPT_INT_) {
+ DBG(SMC_DEBUG_RX, "%s: IRQ_CFG 0x%08x FIFO_INT 0x%08x RX_CFG 0x%08x\n",
+ dev->name,
+ SMC_GET_IRQ_CFG(),
+ SMC_GET_FIFO_INT(),
+ SMC_GET_RX_CFG());
+ DBG(SMC_DEBUG_RX, "%s: Rx Stat FIFO Used 0x%02x "
+ "Data FIFO Used 0x%04x Stat FIFO 0x%08x\n",
+ dev->name,
+ (SMC_GET_RX_FIFO_INF() & 0x00ff0000) >> 16,
+ SMC_GET_RX_FIFO_INF() & 0xffff,
+ SMC_GET_RX_STS_FIFO_PEEK());
+ SMC_SET_GPT_CFG(GPT_CFG_TIMER_EN_ | 10000);
+ SMC_ACK_INT(INT_STS_GPT_INT_);
+ }
+#endif
+
+ /* Handle PHY interupt condition */
+ if (status & INT_STS_PHY_INT_) {
+ DBG(SMC_DEBUG_MISC, "%s: PHY irq\n", dev->name);
+ smc911x_phy_interrupt(dev);
+ SMC_ACK_INT(INT_STS_PHY_INT_);
+ }
+ } while (--timeout);
+
+ /* restore mask state */
+ SMC_SET_INT_EN(mask);
+
+ DBG(SMC_DEBUG_MISC, "%s: Interrupt done (%d loops)\n",
+ dev->name, 8-timeout);
+
+ spin_unlock_irqrestore(&lp->lock, flags);
+
+ DBG(3, "%s: Interrupt done (%d loops)\n", dev->name, 8-timeout);
+
+ return IRQ_HANDLED;
+}
+
+#ifdef SMC_USE_DMA
+static void
+smc911x_tx_dma_irq(int dma, void *data, struct pt_regs *regs)
+{
+ struct net_device *dev = (struct net_device *)data;
+ struct smc911x_local *lp = netdev_priv(dev);
+ struct sk_buff *skb = lp->current_tx_skb;
+ unsigned long flags;
+
+ DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __FUNCTION__);
+
+ DBG(SMC_DEBUG_TX | SMC_DEBUG_DMA, "%s: TX DMA irq handler\n", dev->name);
+ /* Clear the DMA interrupt sources */
+ SMC_DMA_ACK_IRQ(dev, dma);
+ BUG_ON(skb == NULL);
+ dma_unmap_single(NULL, tx_dmabuf, tx_dmalen, DMA_TO_DEVICE);
+ dev->trans_start = jiffies;
+ dev_kfree_skb_irq(skb);
+ lp->current_tx_skb = NULL;
+ if (lp->pending_tx_skb != NULL)
+ smc911x_hardware_send_pkt(dev);
+ else {
+ DBG(SMC_DEBUG_TX | SMC_DEBUG_DMA,
+ "%s: No pending Tx packets. DMA disabled\n", dev->name);
+ spin_lock_irqsave(&lp->lock, flags);
+ lp->txdma_active = 0;
+ if (!lp->tx_throttle) {
+ netif_wake_queue(dev);
+ }
+ spin_unlock_irqrestore(&lp->lock, flags);
+ }
+
+ DBG(SMC_DEBUG_TX | SMC_DEBUG_DMA,
+ "%s: TX DMA irq completed\n", dev->name);
+}
+static void
+smc911x_rx_dma_irq(int dma, void *data, struct pt_regs *regs)
+{
+ struct net_device *dev = (struct net_device *)data;
+ unsigned long ioaddr = dev->base_addr;
+ struct smc911x_local *lp = netdev_priv(dev);
+ struct sk_buff *skb = lp->current_rx_skb;
+ unsigned long flags;
+ unsigned int pkts;
+
+ DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __FUNCTION__);
+ DBG(SMC_DEBUG_RX | SMC_DEBUG_DMA, "%s: RX DMA irq handler\n", dev->name);
+ /* Clear the DMA interrupt sources */
+ SMC_DMA_ACK_IRQ(dev, dma);
+ dma_unmap_single(NULL, rx_dmabuf, rx_dmalen, DMA_FROM_DEVICE);
+ BUG_ON(skb == NULL);
+ lp->current_rx_skb = NULL;
+ PRINT_PKT(skb->data, skb->len);
+ dev->last_rx = jiffies;
+ skb->dev = dev;
+ skb->protocol = eth_type_trans(skb, dev);
+ netif_rx(skb);
+ lp->stats.rx_packets++;
+ lp->stats.rx_bytes += skb->len;
+
+ spin_lock_irqsave(&lp->lock, flags);
+ pkts = (SMC_GET_RX_FIFO_INF() & RX_FIFO_INF_RXSUSED_) >> 16;
+ if (pkts != 0) {
+ smc911x_rcv(dev);
+ }else {
+ lp->rxdma_active = 0;
+ }
+ spin_unlock_irqrestore(&lp->lock, flags);
+ DBG(SMC_DEBUG_RX | SMC_DEBUG_DMA,
+ "%s: RX DMA irq completed. DMA RX FIFO PKTS %d\n",
+ dev->name, pkts);
+}
+#endif /* SMC_USE_DMA */
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/*
+ * Polling receive - used by netconsole and other diagnostic tools
+ * to allow network i/o with interrupts disabled.
+ */
+static void smc911x_poll_controller(struct net_device *dev)
+{
+ disable_irq(dev->irq);
+ smc911x_interrupt(dev->irq, dev, NULL);
+ enable_irq(dev->irq);
+}
+#endif
+
+/* Our watchdog timed out. Called by the networking layer */
+static void smc911x_timeout(struct net_device *dev)
+{
+ struct smc911x_local *lp = netdev_priv(dev);
+ unsigned long ioaddr = dev->base_addr;
+ int status, mask;
+ unsigned long flags;
+
+ DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __FUNCTION__);
+
+ spin_lock_irqsave(&lp->lock, flags);
+ status = SMC_GET_INT();
+ mask = SMC_GET_INT_EN();
+ spin_unlock_irqrestore(&lp->lock, flags);
+ DBG(SMC_DEBUG_MISC, "%s: INT 0x%02x MASK 0x%02x \n",
+ dev->name, status, mask);
+
+ /* Dump the current TX FIFO contents and restart */
+ mask = SMC_GET_TX_CFG();
+ SMC_SET_TX_CFG(mask | TX_CFG_TXS_DUMP_ | TX_CFG_TXD_DUMP_);
+ /*
+ * Reconfiguring the PHY doesn't seem like a bad idea here, but
+ * smc911x_phy_configure() calls msleep() which calls schedule_timeout()
+ * which calls schedule(). Hence we use a work queue.
+ */
+ if (lp->phy_type != 0) {
+ if (schedule_work(&lp->phy_configure)) {
+ lp->work_pending = 1;
+ }
+ }
+
+ /* We can accept TX packets again */
+ dev->trans_start = jiffies;
+ netif_wake_queue(dev);
+}
+
+/*
+ * This routine will, depending on the values passed to it,
+ * either make it accept multicast packets, go into
+ * promiscuous mode (for TCPDUMP and cousins) or accept
+ * a select set of multicast packets
+ */
+static void smc911x_set_multicast_list(struct net_device *dev)
+{
+ struct smc911x_local *lp = netdev_priv(dev);
+ unsigned long ioaddr = dev->base_addr;
+ unsigned int multicast_table[2];
+ unsigned int mcr, update_multicast = 0;
+ unsigned long flags;
+ /* table for flipping the order of 5 bits */
+ static const unsigned char invert5[] =
+ {0x00, 0x10, 0x08, 0x18, 0x04, 0x14, 0x0C, 0x1C,
+ 0x02, 0x12, 0x0A, 0x1A, 0x06, 0x16, 0x0E, 0x1E,
+ 0x01, 0x11, 0x09, 0x19, 0x05, 0x15, 0x0D, 0x1D,
+ 0x03, 0x13, 0x0B, 0x1B, 0x07, 0x17, 0x0F, 0x1F};
+
+
+ DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __FUNCTION__);
+
+ spin_lock_irqsave(&lp->lock, flags);
+ SMC_GET_MAC_CR(mcr);
+ spin_unlock_irqrestore(&lp->lock, flags);
+
+ if (dev->flags & IFF_PROMISC) {
+
+ DBG(SMC_DEBUG_MISC, "%s: RCR_PRMS\n", dev->name);
+ mcr |= MAC_CR_PRMS_;
+ }
+ /*
+ * Here, I am setting this to accept all multicast packets.
+ * I don't need to zero the multicast table, because the flag is
+ * checked before the table is
+ */
+ else if (dev->flags & IFF_ALLMULTI || dev->mc_count > 16) {
+ DBG(SMC_DEBUG_MISC, "%s: RCR_ALMUL\n", dev->name);
+ mcr |= MAC_CR_MCPAS_;
+ }
+
+ /*
+ * This sets the internal hardware table to filter out unwanted
+ * multicast packets before they take up memory.
+ *
+ * The SMC chip uses a hash table where the high 6 bits of the CRC of
+ * address are the offset into the table. If that bit is 1, then the
+ * multicast packet is accepted. Otherwise, it's dropped silently.
+ *
+ * To use the 6 bits as an offset into the table, the high 1 bit is
+ * the number of the 32 bit register, while the low 5 bits are the bit
+ * within that register.
+ */
+ else if (dev->mc_count) {
+ int i;
+ struct dev_mc_list *cur_addr;
+
+ /* Set the Hash perfec mode */
+ mcr |= MAC_CR_HPFILT_;
+
+ /* start with a table of all zeros: reject all */
+ memset(multicast_table, 0, sizeof(multicast_table));
+
+ cur_addr = dev->mc_list;
+ for (i = 0; i < dev->mc_count; i++, cur_addr = cur_addr->next) {
+ int position;
+
+ /* do we have a pointer here? */
+ if (!cur_addr)
+ break;
+ /* make sure this is a multicast address -
+ shouldn't this be a given if we have it here ? */
+ if (!(*cur_addr->dmi_addr & 1))
+ continue;
+
+ /* only use the low order bits */
+ position = crc32_le(~0, cur_addr->dmi_addr, 6) & 0x3f;
+
+ /* do some messy swapping to put the bit in the right spot */
+ multicast_table[invert5[position&0x1F]&0x1] |=
+ (1<<invert5[(position>>1)&0x1F]);
+ }
+
+ /* be sure I get rid of flags I might have set */
+ mcr &= ~(MAC_CR_PRMS_ | MAC_CR_MCPAS_);
+
+ /* now, the table can be loaded into the chipset */
+ update_multicast = 1;
+ } else {
+ DBG(SMC_DEBUG_MISC, "%s: ~(MAC_CR_PRMS_|MAC_CR_MCPAS_)\n",
+ dev->name);
+ mcr &= ~(MAC_CR_PRMS_ | MAC_CR_MCPAS_);
+
+ /*
+ * since I'm disabling all multicast entirely, I need to
+ * clear the multicast list
+ */
+ memset(multicast_table, 0, sizeof(multicast_table));
+ update_multicast = 1;
+ }
+
+ spin_lock_irqsave(&lp->lock, flags);
+ SMC_SET_MAC_CR(mcr);
+ if (update_multicast) {
+ DBG(SMC_DEBUG_MISC,
+ "%s: update mcast hash table 0x%08x 0x%08x\n",
+ dev->name, multicast_table[0], multicast_table[1]);
+ SMC_SET_HASHL(multicast_table[0]);
+ SMC_SET_HASHH(multicast_table[1]);
+ }
+ spin_unlock_irqrestore(&lp->lock, flags);
+}
+
+
+/*
+ * Open and Initialize the board
+ *
+ * Set up everything, reset the card, etc..
+ */
+static int
+smc911x_open(struct net_device *dev)
+{
+ DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __FUNCTION__);
+
+ /*
+ * Check that the address is valid. If its not, refuse
+ * to bring the device up. The user must specify an
+ * address using ifconfig eth0 hw ether xx:xx:xx:xx:xx:xx
+ */
+ if (!is_valid_ether_addr(dev->dev_addr)) {
+ PRINTK("%s: no valid ethernet hw addr\n", __FUNCTION__);
+ return -EINVAL;
+ }
+
+ /* reset the hardware */
+ smc911x_reset(dev);
+
+ /* Configure the PHY, initialize the link state */
+ smc911x_phy_configure(dev);
+
+ /* Turn on Tx + Rx */
+ smc911x_enable(dev);
+
+ netif_start_queue(dev);
+
+ return 0;
+}
+
+/*
+ * smc911x_close
+ *
+ * this makes the board clean up everything that it can
+ * and not talk to the outside world. Caused by
+ * an 'ifconfig ethX down'
+ */
+static int smc911x_close(struct net_device *dev)
+{
+ struct smc911x_local *lp = netdev_priv(dev);
+
+ DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __FUNCTION__);
+
+ netif_stop_queue(dev);
+ netif_carrier_off(dev);
+
+ /* clear everything */
+ smc911x_shutdown(dev);
+
+ if (lp->phy_type != 0) {
+ /* We need to ensure that no calls to
+ * smc911x_phy_configure are pending.
+
+ * flush_scheduled_work() cannot be called because we
+ * are running with the netlink semaphore held (from
+ * devinet_ioctl()) and the pending work queue
+ * contains linkwatch_event() (scheduled by
+ * netif_carrier_off() above). linkwatch_event() also
+ * wants the netlink semaphore.
+ */
+ while (lp->work_pending)
+ schedule();
+ smc911x_phy_powerdown(dev, lp->mii.phy_id);
+ }
+
+ if (lp->pending_tx_skb) {
+ dev_kfree_skb(lp->pending_tx_skb);
+ lp->pending_tx_skb = NULL;
+ }
+
+ return 0;
+}
+
+/*
+ * Get the current statistics.
+ * This may be called with the card open or closed.
+ */
+static struct net_device_stats *smc911x_query_statistics(struct net_device *dev)
+{
+ struct smc911x_local *lp = netdev_priv(dev);
+ DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __FUNCTION__);
+
+
+ return &lp->stats;
+}
+
+/*
+ * Ethtool support
+ */
+static int
+smc911x_ethtool_getsettings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct smc911x_local *lp = netdev_priv(dev);
+ unsigned long ioaddr = dev->base_addr;
+ int ret, status;
+ unsigned long flags;
+
+ DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __FUNCTION__);
+ cmd->maxtxpkt = 1;
+ cmd->maxrxpkt = 1;
+
+ if (lp->phy_type != 0) {
+ spin_lock_irqsave(&lp->lock, flags);
+ ret = mii_ethtool_gset(&lp->mii, cmd);
+ spin_unlock_irqrestore(&lp->lock, flags);
+ } else {
+ cmd->supported = SUPPORTED_10baseT_Half |
+ SUPPORTED_10baseT_Full |
+ SUPPORTED_TP | SUPPORTED_AUI;
+
+ if (lp->ctl_rspeed == 10)
+ cmd->speed = SPEED_10;
+ else if (lp->ctl_rspeed == 100)
+ cmd->speed = SPEED_100;
+
+ cmd->autoneg = AUTONEG_DISABLE;
+ if (lp->mii.phy_id==1)
+ cmd->transceiver = XCVR_INTERNAL;
+ else
+ cmd->transceiver = XCVR_EXTERNAL;
+ cmd->port = 0;
+ SMC_GET_PHY_SPECIAL(lp->mii.phy_id, status);
+ cmd->duplex =
+ (status & (PHY_SPECIAL_SPD_10FULL_ | PHY_SPECIAL_SPD_100FULL_)) ?
+ DUPLEX_FULL : DUPLEX_HALF;
+ ret = 0;
+ }
+
+ return ret;
+}
+
+static int
+smc911x_ethtool_setsettings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct smc911x_local *lp = netdev_priv(dev);
+ int ret;
+ unsigned long flags;
+
+ if (lp->phy_type != 0) {
+ spin_lock_irqsave(&lp->lock, flags);
+ ret = mii_ethtool_sset(&lp->mii, cmd);
+ spin_unlock_irqrestore(&lp->lock, flags);
+ } else {
+ if (cmd->autoneg != AUTONEG_DISABLE ||
+ cmd->speed != SPEED_10 ||
+ (cmd->duplex != DUPLEX_HALF && cmd->duplex != DUPLEX_FULL) ||
+ (cmd->port != PORT_TP && cmd->port != PORT_AUI))
+ return -EINVAL;
+
+ lp->ctl_rfduplx = cmd->duplex == DUPLEX_FULL;
+
+ ret = 0;
+ }
+
+ return ret;
+}
+
+static void
+smc911x_ethtool_getdrvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
+{
+ strncpy(info->driver, CARDNAME, sizeof(info->driver));
+ strncpy(info->version, version, sizeof(info->version));
+ strncpy(info->bus_info, dev->class_dev.dev->bus_id, sizeof(info->bus_info));
+}
+
+static int smc911x_ethtool_nwayreset(struct net_device *dev)
+{
+ struct smc911x_local *lp = netdev_priv(dev);
+ int ret = -EINVAL;
+ unsigned long flags;
+
+ if (lp->phy_type != 0) {
+ spin_lock_irqsave(&lp->lock, flags);
+ ret = mii_nway_restart(&lp->mii);
+ spin_unlock_irqrestore(&lp->lock, flags);
+ }
+
+ return ret;
+}
+
+static u32 smc911x_ethtool_getmsglevel(struct net_device *dev)
+{
+ struct smc911x_local *lp = netdev_priv(dev);
+ return lp->msg_enable;
+}
+
+static void smc911x_ethtool_setmsglevel(struct net_device *dev, u32 level)
+{
+ struct smc911x_local *lp = netdev_priv(dev);
+ lp->msg_enable = level;
+}
+
+static int smc911x_ethtool_getregslen(struct net_device *dev)
+{
+ /* System regs + MAC regs + PHY regs */
+ return (((E2P_CMD - ID_REV)/4 + 1) +
+ (WUCSR - MAC_CR)+1 + 32) * sizeof(u32);
+}
+
+static void smc911x_ethtool_getregs(struct net_device *dev,
+ struct ethtool_regs* regs, void *buf)
+{
+ unsigned long ioaddr = dev->base_addr;
+ struct smc911x_local *lp = netdev_priv(dev);
+ unsigned long flags;
+ u32 reg,i,j=0;
+ u32 *data = (u32*)buf;
+
+ regs->version = lp->version;
+ for(i=ID_REV;i<=E2P_CMD;i+=4) {
+ data[j++] = SMC_inl(ioaddr,i);
+ }
+ for(i=MAC_CR;i<=WUCSR;i++) {
+ spin_lock_irqsave(&lp->lock, flags);
+ SMC_GET_MAC_CSR(i, reg);
+ spin_unlock_irqrestore(&lp->lock, flags);
+ data[j++] = reg;
+ }
+ for(i=0;i<=31;i++) {
+ spin_lock_irqsave(&lp->lock, flags);
+ SMC_GET_MII(i, lp->mii.phy_id, reg);
+ spin_unlock_irqrestore(&lp->lock, flags);
+ data[j++] = reg & 0xFFFF;
+ }
+}
+
+static int smc911x_ethtool_wait_eeprom_ready(struct net_device *dev)
+{
+ unsigned long ioaddr = dev->base_addr;
+ unsigned int timeout;
+ int e2p_cmd;
+
+ e2p_cmd = SMC_GET_E2P_CMD();
+ for(timeout=10;(e2p_cmd & E2P_CMD_EPC_BUSY_) && timeout; timeout--) {
+ if (e2p_cmd & E2P_CMD_EPC_TIMEOUT_) {
+ PRINTK("%s: %s timeout waiting for EEPROM to respond\n",
+ dev->name, __FUNCTION__);
+ return -EFAULT;
+ }
+ mdelay(1);
+ e2p_cmd = SMC_GET_E2P_CMD();
+ }
+ if (timeout == 0) {
+ PRINTK("%s: %s timeout waiting for EEPROM CMD not busy\n",
+ dev->name, __FUNCTION__);
+ return -ETIMEDOUT;
+ }
+ return 0;
+}
+
+static inline int smc911x_ethtool_write_eeprom_cmd(struct net_device *dev,
+ int cmd, int addr)
+{
+ unsigned long ioaddr = dev->base_addr;
+ int ret;
+
+ if ((ret = smc911x_ethtool_wait_eeprom_ready(dev))!=0)
+ return ret;
+ SMC_SET_E2P_CMD(E2P_CMD_EPC_BUSY_ |
+ ((cmd) & (0x7<<28)) |
+ ((addr) & 0xFF));
+ return 0;
+}
+
+static inline int smc911x_ethtool_read_eeprom_byte(struct net_device *dev,
+ u8 *data)
+{
+ unsigned long ioaddr = dev->base_addr;
+ int ret;
+
+ if ((ret = smc911x_ethtool_wait_eeprom_ready(dev))!=0)
+ return ret;
+ *data = SMC_GET_E2P_DATA();
+ return 0;
+}
+
+static inline int smc911x_ethtool_write_eeprom_byte(struct net_device *dev,
+ u8 data)
+{
+ unsigned long ioaddr = dev->base_addr;
+ int ret;
+
+ if ((ret = smc911x_ethtool_wait_eeprom_ready(dev))!=0)
+ return ret;
+ SMC_SET_E2P_DATA(data);
+ return 0;
+}
+
+static int smc911x_ethtool_geteeprom(struct net_device *dev,
+ struct ethtool_eeprom *eeprom, u8 *data)
+{
+ u8 eebuf[SMC911X_EEPROM_LEN];
+ int i, ret;
+
+ for(i=0;i<SMC911X_EEPROM_LEN;i++) {
+ if ((ret=smc911x_ethtool_write_eeprom_cmd(dev, E2P_CMD_EPC_CMD_READ_, i ))!=0)
+ return ret;
+ if ((ret=smc911x_ethtool_read_eeprom_byte(dev, &eebuf[i]))!=0)
+ return ret;
+ }
+ memcpy(data, eebuf+eeprom->offset, eeprom->len);
+ return 0;
+}
+
+static int smc911x_ethtool_seteeprom(struct net_device *dev,
+ struct ethtool_eeprom *eeprom, u8 *data)
+{
+ int i, ret;
+
+ /* Enable erase */
+ if ((ret=smc911x_ethtool_write_eeprom_cmd(dev, E2P_CMD_EPC_CMD_EWEN_, 0 ))!=0)
+ return ret;
+ for(i=eeprom->offset;i<(eeprom->offset+eeprom->len);i++) {
+ /* erase byte */
+ if ((ret=smc911x_ethtool_write_eeprom_cmd(dev, E2P_CMD_EPC_CMD_ERASE_, i ))!=0)
+ return ret;
+ /* write byte */
+ if ((ret=smc911x_ethtool_write_eeprom_byte(dev, *data))!=0)
+ return ret;
+ if ((ret=smc911x_ethtool_write_eeprom_cmd(dev, E2P_CMD_EPC_CMD_WRITE_, i ))!=0)
+ return ret;
+ }
+ return 0;
+}
+
+static int smc911x_ethtool_geteeprom_len(struct net_device *dev)
+{
+ return SMC911X_EEPROM_LEN;
+}
+
+static struct ethtool_ops smc911x_ethtool_ops = {
+ .get_settings = smc911x_ethtool_getsettings,
+ .set_settings = smc911x_ethtool_setsettings,
+ .get_drvinfo = smc911x_ethtool_getdrvinfo,
+ .get_msglevel = smc911x_ethtool_getmsglevel,
+ .set_msglevel = smc911x_ethtool_setmsglevel,
+ .nway_reset = smc911x_ethtool_nwayreset,
+ .get_link = ethtool_op_get_link,
+ .get_regs_len = smc911x_ethtool_getregslen,
+ .get_regs = smc911x_ethtool_getregs,
+ .get_eeprom_len = smc911x_ethtool_geteeprom_len,
+ .get_eeprom = smc911x_ethtool_geteeprom,
+ .set_eeprom = smc911x_ethtool_seteeprom,
+};
+
+/*
+ * smc911x_findirq
+ *
+ * This routine has a simple purpose -- make the SMC chip generate an
+ * interrupt, so an auto-detect routine can detect it, and find the IRQ,
+ */
+static int __init smc911x_findirq(unsigned long ioaddr)
+{
+ int timeout = 20;
+ unsigned long cookie;
+
+ DBG(SMC_DEBUG_FUNC, "--> %s\n", __FUNCTION__);
+
+ cookie = probe_irq_on();
+
+ /*
+ * Force a SW interrupt
+ */
+
+ SMC_SET_INT_EN(INT_EN_SW_INT_EN_);
+
+ /*
+ * Wait until positive that the interrupt has been generated
+ */
+ do {
+ int int_status;
+ udelay(10);
+ int_status = SMC_GET_INT_EN();
+ if (int_status & INT_EN_SW_INT_EN_)
+ break; /* got the interrupt */
+ } while (--timeout);
+
+ /*
+ * there is really nothing that I can do here if timeout fails,
+ * as autoirq_report will return a 0 anyway, which is what I
+ * want in this case. Plus, the clean up is needed in both
+ * cases.
+ */
+
+ /* and disable all interrupts again */
+ SMC_SET_INT_EN(0);
+
+ /* and return what I found */
+ return probe_irq_off(cookie);
+}
+
+/*
+ * Function: smc911x_probe(unsigned long ioaddr)
+ *
+ * Purpose:
+ * Tests to see if a given ioaddr points to an SMC911x chip.
+ * Returns a 0 on success
+ *
+ * Algorithm:
+ * (1) see if the endian word is OK
+ * (1) see if I recognize the chip ID in the appropriate register
+ *
+ * Here I do typical initialization tasks.
+ *
+ * o Initialize the structure if needed
+ * o print out my vanity message if not done so already
+ * o print out what type of hardware is detected
+ * o print out the ethernet address
+ * o find the IRQ
+ * o set up my private data
+ * o configure the dev structure with my subroutines
+ * o actually GRAB the irq.
+ * o GRAB the region
+ */
+static int __init smc911x_probe(struct net_device *dev, unsigned long ioaddr)
+{
+ struct smc911x_local *lp = netdev_priv(dev);
+ int i, retval;
+ unsigned int val, chip_id, revision;
+ const char *version_string;
+
+ DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __FUNCTION__);
+
+ /* First, see if the endian word is recognized */
+ val = SMC_GET_BYTE_TEST();
+ DBG(SMC_DEBUG_MISC, "%s: endian probe returned 0x%04x\n", CARDNAME, val);
+ if (val != 0x87654321) {
+ printk(KERN_ERR "Invalid chip endian 0x08%x\n",val);
+ retval = -ENODEV;
+ goto err_out;
+ }
+
+ /*
+ * check if the revision register is something that I
+ * recognize. These might need to be added to later,
+ * as future revisions could be added.
+ */
+ chip_id = SMC_GET_PN();
+ DBG(SMC_DEBUG_MISC, "%s: id probe returned 0x%04x\n", CARDNAME, chip_id);
+ for(i=0;chip_ids[i].id != 0; i++) {
+ if (chip_ids[i].id == chip_id) break;
+ }
+ if (!chip_ids[i].id) {
+ printk(KERN_ERR "Unknown chip ID %04x\n", chip_id);
+ retval = -ENODEV;
+ goto err_out;
+ }
+ version_string = chip_ids[i].name;
+
+ revision = SMC_GET_REV();
+ DBG(SMC_DEBUG_MISC, "%s: revision = 0x%04x\n", CARDNAME, revision);
+
+ /* At this point I'll assume that the chip is an SMC911x. */
+ DBG(SMC_DEBUG_MISC, "%s: Found a %s\n", CARDNAME, chip_ids[i].name);
+
+ /* Validate the TX FIFO size requested */
+ if ((tx_fifo_kb < 2) || (tx_fifo_kb > 14)) {
+ printk(KERN_ERR "Invalid TX FIFO size requested %d\n", tx_fifo_kb);
+ retval = -EINVAL;
+ goto err_out;
+ }
+
+ /* fill in some of the fields */
+ dev->base_addr = ioaddr;
+ lp->version = chip_ids[i].id;
+ lp->revision = revision;
+ lp->tx_fifo_kb = tx_fifo_kb;
+ /* Reverse calculate the RX FIFO size from the TX */
+ lp->tx_fifo_size=(lp->tx_fifo_kb<<10) - 512;
+ lp->rx_fifo_size= ((0x4000 - 512 - lp->tx_fifo_size) / 16) * 15;
+
+ /* Set the automatic flow control values */
+ switch(lp->tx_fifo_kb) {
+ /*
+ * AFC_HI is about ((Rx Data Fifo Size)*2/3)/64
+ * AFC_LO is AFC_HI/2
+ * BACK_DUR is about 5uS*(AFC_LO) rounded down
+ */
+ case 2:/* 13440 Rx Data Fifo Size */
+ lp->afc_cfg=0x008C46AF;break;
+ case 3:/* 12480 Rx Data Fifo Size */
+ lp->afc_cfg=0x0082419F;break;
+ case 4:/* 11520 Rx Data Fifo Size */
+ lp->afc_cfg=0x00783C9F;break;
+ case 5:/* 10560 Rx Data Fifo Size */
+ lp->afc_cfg=0x006E374F;break;
+ case 6:/* 9600 Rx Data Fifo Size */
+ lp->afc_cfg=0x0064328F;break;
+ case 7:/* 8640 Rx Data Fifo Size */
+ lp->afc_cfg=0x005A2D7F;break;
+ case 8:/* 7680 Rx Data Fifo Size */
+ lp->afc_cfg=0x0050287F;break;
+ case 9:/* 6720 Rx Data Fifo Size */
+ lp->afc_cfg=0x0046236F;break;
+ case 10:/* 5760 Rx Data Fifo Size */
+ lp->afc_cfg=0x003C1E6F;break;
+ case 11:/* 4800 Rx Data Fifo Size */
+ lp->afc_cfg=0x0032195F;break;
+ /*
+ * AFC_HI is ~1520 bytes less than RX Data Fifo Size
+ * AFC_LO is AFC_HI/2
+ * BACK_DUR is about 5uS*(AFC_LO) rounded down
+ */
+ case 12:/* 3840 Rx Data Fifo Size */
+ lp->afc_cfg=0x0024124F;break;
+ case 13:/* 2880 Rx Data Fifo Size */
+ lp->afc_cfg=0x0015073F;break;
+ case 14:/* 1920 Rx Data Fifo Size */
+ lp->afc_cfg=0x0006032F;break;
+ default:
+ PRINTK("%s: ERROR -- no AFC_CFG setting found",
+ dev->name);
+ break;
+ }
+
+ DBG(SMC_DEBUG_MISC | SMC_DEBUG_TX | SMC_DEBUG_RX,
+ "%s: tx_fifo %d rx_fifo %d afc_cfg 0x%08x\n", CARDNAME,
+ lp->tx_fifo_size, lp->rx_fifo_size, lp->afc_cfg);
+
+ spin_lock_init(&lp->lock);
+
+ /* Get the MAC address */
+ SMC_GET_MAC_ADDR(dev->dev_addr);
+
+ /* now, reset the chip, and put it into a known state */
+ smc911x_reset(dev);
+
+ /*
+ * If dev->irq is 0, then the device has to be banged on to see
+ * what the IRQ is.
+ *
+ * Specifying an IRQ is done with the assumption that the user knows
+ * what (s)he is doing. No checking is done!!!!
+ */
+ if (dev->irq < 1) {
+ int trials;
+
+ trials = 3;
+ while (trials--) {
+ dev->irq = smc911x_findirq(ioaddr);
+ if (dev->irq)
+ break;
+ /* kick the card and try again */
+ smc911x_reset(dev);
+ }
+ }
+ if (dev->irq == 0) {
+ printk("%s: Couldn't autodetect your IRQ. Use irq=xx.\n",
+ dev->name);
+ retval = -ENODEV;
+ goto err_out;
+ }
+ dev->irq = irq_canonicalize(dev->irq);
+
+ /* Fill in the fields of the device structure with ethernet values. */
+ ether_setup(dev);
+
+ dev->open = smc911x_open;
+ dev->stop = smc911x_close;
+ dev->hard_start_xmit = smc911x_hard_start_xmit;
+ dev->tx_timeout = smc911x_timeout;
+ dev->watchdog_timeo = msecs_to_jiffies(watchdog);
+ dev->get_stats = smc911x_query_statistics;
+ dev->set_multicast_list = smc911x_set_multicast_list;
+ dev->ethtool_ops = &smc911x_ethtool_ops;
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ dev->poll_controller = smc911x_poll_controller;
+#endif
+
+ INIT_WORK(&lp->phy_configure, smc911x_phy_configure, dev);
+ lp->mii.phy_id_mask = 0x1f;
+ lp->mii.reg_num_mask = 0x1f;
+ lp->mii.force_media = 0;
+ lp->mii.full_duplex = 0;
+ lp->mii.dev = dev;
+ lp->mii.mdio_read = smc911x_phy_read;
+ lp->mii.mdio_write = smc911x_phy_write;
+
+ /*
+ * Locate the phy, if any.
+ */
+ smc911x_phy_detect(dev);
+
+ /* Set default parameters */
+ lp->msg_enable = NETIF_MSG_LINK;
+ lp->ctl_rfduplx = 1;
+ lp->ctl_rspeed = 100;
+
+ /* Grab the IRQ */
+ retval = request_irq(dev->irq, &smc911x_interrupt, SA_SHIRQ, dev->name, dev);
+ if (retval)
+ goto err_out;
+
+ set_irq_type(dev->irq, IRQT_FALLING);
+
+#ifdef SMC_USE_DMA
+ lp->rxdma = SMC_DMA_REQUEST(dev, smc911x_rx_dma_irq);
+ lp->txdma = SMC_DMA_REQUEST(dev, smc911x_tx_dma_irq);
+ lp->rxdma_active = 0;
+ lp->txdma_active = 0;
+ dev->dma = lp->rxdma;
+#endif
+
+ retval = register_netdev(dev);
+ if (retval == 0) {
+ /* now, print out the card info, in a short format.. */
+ printk("%s: %s (rev %d) at %#lx IRQ %d",
+ dev->name, version_string, lp->revision,
+ dev->base_addr, dev->irq);
+
+#ifdef SMC_USE_DMA
+ if (lp->rxdma != -1)
+ printk(" RXDMA %d ", lp->rxdma);
+
+ if (lp->txdma != -1)
+ printk("TXDMA %d", lp->txdma);
+#endif
+ printk("\n");
+ if (!is_valid_ether_addr(dev->dev_addr)) {
+ printk("%s: Invalid ethernet MAC address. Please "
+ "set using ifconfig\n", dev->name);
+ } else {
+ /* Print the Ethernet address */
+ printk("%s: Ethernet addr: ", dev->name);
+ for (i = 0; i < 5; i++)
+ printk("%2.2x:", dev->dev_addr[i]);
+ printk("%2.2x\n", dev->dev_addr[5]);
+ }
+
+ if (lp->phy_type == 0) {
+ PRINTK("%s: No PHY found\n", dev->name);
+ } else if ((lp->phy_type & ~0xff) == LAN911X_INTERNAL_PHY_ID) {
+ PRINTK("%s: LAN911x Internal PHY\n", dev->name);
+ } else {
+ PRINTK("%s: External PHY 0x%08x\n", dev->name, lp->phy_type);
+ }
+ }
+
+err_out:
+#ifdef SMC_USE_DMA
+ if (retval) {
+ if (lp->rxdma != -1) {
+ SMC_DMA_FREE(dev, lp->rxdma);
+ }
+ if (lp->txdma != -1) {
+ SMC_DMA_FREE(dev, lp->txdma);
+ }
+ }
+#endif
+ return retval;
+}
+
+/*
+ * smc911x_init(void)
+ *
+ * Output:
+ * 0 --> there is a device
+ * anything else, error
+ */
+static int smc911x_drv_probe(struct platform_device *pdev)
+{
+ struct net_device *ndev;
+ struct resource *res;
+ unsigned int *addr;
+ int ret;
+
+ DBG(SMC_DEBUG_FUNC, "--> %s\n", __FUNCTION__);
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ ret = -ENODEV;
+ goto out;
+ }
+
+ /*
+ * Request the regions.
+ */
+ if (!request_mem_region(res->start, SMC911X_IO_EXTENT, CARDNAME)) {
+ ret = -EBUSY;
+ goto out;
+ }
+
+ ndev = alloc_etherdev(sizeof(struct smc911x_local));
+ if (!ndev) {
+ printk("%s: could not allocate device.\n", CARDNAME);
+ ret = -ENOMEM;
+ goto release_1;
+ }
+ SET_MODULE_OWNER(ndev);
+ SET_NETDEV_DEV(ndev, &pdev->dev);
+
+ ndev->dma = (unsigned char)-1;
+ ndev->irq = platform_get_irq(pdev, 0);
+
+ addr = ioremap(res->start, SMC911X_IO_EXTENT);
+ if (!addr) {
+ ret = -ENOMEM;
+ goto release_both;
+ }
+
+ platform_set_drvdata(pdev, ndev);
+ ret = smc911x_probe(ndev, (unsigned long)addr);
+ if (ret != 0) {
+ platform_set_drvdata(pdev, NULL);
+ iounmap(addr);
+release_both:
+ free_netdev(ndev);
+release_1:
+ release_mem_region(res->start, SMC911X_IO_EXTENT);
+out:
+ printk("%s: not found (%d).\n", CARDNAME, ret);
+ }
+#ifdef SMC_USE_DMA
+ else {
+ struct smc911x_local *lp = netdev_priv(ndev);
+ lp->physaddr = res->start;
+ lp->dev = &pdev->dev;
+ }
+#endif
+
+ return ret;
+}
+
+static int smc911x_drv_remove(struct platform_device *pdev)
+{
+ struct net_device *ndev = platform_get_drvdata(pdev);
+ struct resource *res;
+
+ DBG(SMC_DEBUG_FUNC, "--> %s\n", __FUNCTION__);
+ platform_set_drvdata(pdev, NULL);
+
+ unregister_netdev(ndev);
+
+ free_irq(ndev->irq, ndev);
+
+#ifdef SMC_USE_DMA
+ {
+ struct smc911x_local *lp = netdev_priv(ndev);
+ if (lp->rxdma != -1) {
+ SMC_DMA_FREE(dev, lp->rxdma);
+ }
+ if (lp->txdma != -1) {
+ SMC_DMA_FREE(dev, lp->txdma);
+ }
+ }
+#endif
+ iounmap((void *)ndev->base_addr);
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ release_mem_region(res->start, SMC911X_IO_EXTENT);
+
+ free_netdev(ndev);
+ return 0;
+}
+
+static int smc911x_drv_suspend(struct platform_device *dev, pm_message_t state)
+{
+ struct net_device *ndev = platform_get_drvdata(dev);
+ unsigned long ioaddr = ndev->base_addr;
+
+ DBG(SMC_DEBUG_FUNC, "--> %s\n", __FUNCTION__);
+ if (ndev) {
+ if (netif_running(ndev)) {
+ netif_device_detach(ndev);
+ smc911x_shutdown(ndev);
+#if POWER_DOWN
+ /* Set D2 - Energy detect only setting */
+ SMC_SET_PMT_CTRL(2<<12);
+#endif
+ }
+ }
+ return 0;
+}
+
+static int smc911x_drv_resume(struct platform_device *dev)
+{
+ struct net_device *ndev = platform_get_drvdata(dev);
+
+ DBG(SMC_DEBUG_FUNC, "--> %s\n", __FUNCTION__);
+ if (ndev) {
+ struct smc911x_local *lp = netdev_priv(ndev);
+
+ if (netif_running(ndev)) {
+ smc911x_reset(ndev);
+ smc911x_enable(ndev);
+ if (lp->phy_type != 0)
+ smc911x_phy_configure(ndev);
+ netif_device_attach(ndev);
+ }
+ }
+ return 0;
+}
+
+static struct platform_driver smc911x_driver = {
+ .probe = smc911x_drv_probe,
+ .remove = smc911x_drv_remove,
+ .suspend = smc911x_drv_suspend,
+ .resume = smc911x_drv_resume,
+ .driver = {
+ .name = CARDNAME,
+ },
+};
+
+static int __init smc911x_init(void)
+{
+ return platform_driver_register(&smc911x_driver);
+}
+
+static void __exit smc911x_cleanup(void)
+{
+ platform_driver_unregister(&smc911x_driver);
+}
+
+module_init(smc911x_init);
+module_exit(smc911x_cleanup);
diff -rNup linux-2.6.16.1.orig/drivers/net/smc911x.h linux-2.6.16.1/drivers/net/smc911x.h
--- linux-2.6.16.1.orig/drivers/net/smc911x.h 1969-12-31 16:00:00.000000000 -0800
+++ linux-2.6.16.1/drivers/net/smc911x.h 2006-04-18 10:02:26.000000000 -0700
@@ -0,0 +1,835 @@
+/*------------------------------------------------------------------------
+ . smc911x.h - macros for SMSC's LAN911{5,6,7,8} single-chip Ethernet device.
+ .
+ . Copyright (C) 2005 Sensoria Corp.
+ . Derived from the unified SMC91x driver by Nicolas Pitre
+ .
+ . This program is free software; you can redistribute it and/or modify
+ . it under the terms of the GNU General Public License as published by
+ . the Free Software Foundation; either version 2 of the License, or
+ . (at your option) any later version.
+ .
+ . This program is distributed in the hope that it will be useful,
+ . but WITHOUT ANY WARRANTY; without even the implied warranty of
+ . MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ . GNU General Public License for more details.
+ .
+ . You should have received a copy of the GNU General Public License
+ . along with this program; if not, write to the Free Software
+ . Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ .
+ . Information contained in this file was obtained from the LAN9118
+ . manual from SMC. To get a copy, if you really want one, you can find
+ . information under www.smsc.com.
+ .
+ . Authors
+ . Dustin McIntire <dustin@sensoria.com>
+ .
+ ---------------------------------------------------------------------------*/
+#ifndef _SMC911X_H_
+#define _SMC911X_H_
+
+/*
+ * Use the DMA feature on PXA chips
+ */
+#ifdef CONFIG_ARCH_PXA
+ #define SMC_USE_PXA_DMA 1
+ #define SMC_USE_16BIT 0
+ #define SMC_USE_32BIT 1
+#endif
+
+
+/*
+ * Define the bus width specific IO macros
+ */
+
+#if SMC_USE_16BIT
+#define SMC_inb(a, r) readb((a) + (r))
+#define SMC_inw(a, r) readw((a) + (r))
+#define SMC_inl(a, r) ((SMC_inw(a, r) & 0xFFFF)+(SMC_inw(a+2, r)<<16))
+#define SMC_outb(v, a, r) writeb(v, (a) + (r))
+#define SMC_outw(v, a, r) writew(v, (a) + (r))
+#define SMC_outl(v, a, r) \
+ do{ \
+ writel(v & 0xFFFF, (a) + (r)); \
+ writel(v >> 16, (a) + (r) + 2); \
+ } while (0)
+#define SMC_insl(a, r, p, l) readsw((short*)((a) + (r)), p, l*2)
+#define SMC_outsl(a, r, p, l) writesw((short*)((a) + (r)), p, l*2)
+
+#elif SMC_USE_32BIT
+#define SMC_inb(a, r) readb((a) + (r))
+#define SMC_inw(a, r) readw((a) + (r))
+#define SMC_inl(a, r) readl((a) + (r))
+#define SMC_outb(v, a, r) writeb(v, (a) + (r))
+#define SMC_outl(v, a, r) writel(v, (a) + (r))
+#define SMC_insl(a, r, p, l) readsl((int*)((a) + (r)), p, l)
+#define SMC_outsl(a, r, p, l) writesl((int*)((a) + (r)), p, l)
+
+#endif /* SMC_USE_16BIT */
+
+
+
+#if SMC_USE_PXA_DMA
+#define SMC_USE_DMA
+
+/*
+ * Define the request and free functions
+ * These are unfortunately architecture specific as no generic allocation
+ * mechanism exits
+ */
+#define SMC_DMA_REQUEST(dev, handler) \
+ pxa_request_dma(dev->name, DMA_PRIO_LOW, handler, dev)
+
+#define SMC_DMA_FREE(dev, dma) \
+ pxa_free_dma(dma)
+
+#define SMC_DMA_ACK_IRQ(dev, dma) \
+{ \
+ if (DCSR(dma) & DCSR_BUSERR) { \
+ printk("%s: DMA %d bus error!\n", dev->name, dma); \
+ } \
+ DCSR(dma) = DCSR_STARTINTR|DCSR_ENDINTR|DCSR_BUSERR; \
+}
+
+/*
+ * Use a DMA for RX and TX packets.
+ */
+#include <linux/dma-mapping.h>
+#include <asm/dma.h>
+#include <asm/arch/pxa-regs.h>
+
+static dma_addr_t rx_dmabuf, tx_dmabuf;
+static int rx_dmalen, tx_dmalen;
+
+#ifdef SMC_insl
+#undef SMC_insl
+#define SMC_insl(a, r, p, l) \
+ smc_pxa_dma_insl(lp->dev, a, lp->physaddr, r, lp->rxdma, p, l)
+
+static inline void
+smc_pxa_dma_insl(struct device *dev, u_long ioaddr, u_long physaddr,
+ int reg, int dma, u_char *buf, int len)
+{
+ /* 64 bit alignment is required for memory to memory DMA */
+ if ((long)buf & 4) {
+ *((u32 *)buf) = SMC_inl(ioaddr, reg);
+ buf += 4;
+ len--;
+ }
+
+ len *= 4;
+ rx_dmabuf = dma_map_single(dev, buf, len, DMA_FROM_DEVICE);
+ rx_dmalen = len;
+ DCSR(dma) = DCSR_NODESC;
+ DTADR(dma) = rx_dmabuf;
+ DSADR(dma) = physaddr + reg;
+ DCMD(dma) = (DCMD_INCTRGADDR | DCMD_BURST32 |
+ DCMD_WIDTH4 | DCMD_ENDIRQEN | (DCMD_LENGTH & rx_dmalen));
+ DCSR(dma) = DCSR_NODESC | DCSR_RUN;
+}
+#endif
+
+#ifdef SMC_insw
+#undef SMC_insw
+#define SMC_insw(a, r, p, l) \
+ smc_pxa_dma_insw(lp->dev, a, lp->physaddr, r, lp->rxdma, p, l)
+
+static inline void
+smc_pxa_dma_insw(struct device *dev, u_long ioaddr, u_long physaddr,
+ int reg, int dma, u_char *buf, int len)
+{
+ /* 64 bit alignment is required for memory to memory DMA */
+ while ((long)buf & 6) {
+ *((u16 *)buf) = SMC_inw(ioaddr, reg);
+ buf += 2;
+ len--;
+ }
+
+ len *= 2;
+ rx_dmabuf = dma_map_single(dev, buf, len, DMA_FROM_DEVICE);
+ rx_dmalen = len;
+ DCSR(dma) = DCSR_NODESC;
+ DTADR(dma) = rx_dmabuf;
+ DSADR(dma) = physaddr + reg;
+ DCMD(dma) = (DCMD_INCTRGADDR | DCMD_BURST32 |
+ DCMD_WIDTH2 | DCMD_ENDIRQEN | (DCMD_LENGTH & rx_dmalen));
+ DCSR(dma) = DCSR_NODESC | DCSR_RUN;
+}
+#endif
+
+#ifdef SMC_outsl
+#undef SMC_outsl
+#define SMC_outsl(a, r, p, l) \
+ smc_pxa_dma_outsl(lp->dev, a, lp->physaddr, r, lp->txdma, p, l)
+
+static inline void
+smc_pxa_dma_outsl(struct device *dev, u_long ioaddr, u_long physaddr,
+ int reg, int dma, u_char *buf, int len)
+{
+ /* 64 bit alignment is required for memory to memory DMA */
+ if ((long)buf & 4) {
+ SMC_outl(*((u32 *)buf), ioaddr, reg);
+ buf += 4;
+ len--;
+ }
+
+ len *= 4;
+ tx_dmabuf = dma_map_single(dev, buf, len, DMA_TO_DEVICE);
+ tx_dmalen = len;
+ DCSR(dma) = DCSR_NODESC;
+ DSADR(dma) = tx_dmabuf;
+ DTADR(dma) = physaddr + reg;
+ DCMD(dma) = (DCMD_INCSRCADDR | DCMD_BURST32 |
+ DCMD_WIDTH4 | DCMD_ENDIRQEN | (DCMD_LENGTH & tx_dmalen));
+ DCSR(dma) = DCSR_NODESC | DCSR_RUN;
+}
+#endif
+
+#ifdef SMC_outsw
+#undef SMC_outsw
+#define SMC_outsw(a, r, p, l) \
+ smc_pxa_dma_outsw(lp->dev, a, lp->physaddr, r, lp->txdma, p, l)
+
+static inline void
+smc_pxa_dma_outsw(struct device *dev, u_long ioaddr, u_long physaddr,
+ int reg, int dma, u_char *buf, int len)
+{
+ /* 64 bit alignment is required for memory to memory DMA */
+ while ((long)buf & 6) {
+ SMC_outw(*((u16 *)buf), ioaddr, reg);
+ buf += 2;
+ len--;
+ }
+
+ len *= 2;
+ tx_dmabuf = dma_map_single(dev, buf, len, DMA_TO_DEVICE);
+ tx_dmalen = len;
+ DCSR(dma) = DCSR_NODESC;
+ DSADR(dma) = tx_dmabuf;
+ DTADR(dma) = physaddr + reg;
+ DCMD(dma) = (DCMD_INCSRCADDR | DCMD_BURST32 |
+ DCMD_WIDTH2 | DCMD_ENDIRQEN | (DCMD_LENGTH & tx_dmalen));
+ DCSR(dma) = DCSR_NODESC | DCSR_RUN;
+}
+#endif
+
+#endif /* SMC_USE_PXA_DMA */
+
+
+/* Chip Parameters and Register Definitions */
+
+#define SMC911X_TX_FIFO_LOW_THRESHOLD (1536*2)
+
+#define SMC911X_IO_EXTENT 0x100
+
+#define SMC911X_EEPROM_LEN 7
+
+/* Below are the register offsets and bit definitions
+ * of the Lan911x memory space
+ */
+#define RX_DATA_FIFO (0x00)
+
+#define TX_DATA_FIFO (0x20)
+#define TX_CMD_A_INT_ON_COMP_ (0x80000000)
+#define TX_CMD_A_INT_BUF_END_ALGN_ (0x03000000)
+#define TX_CMD_A_INT_4_BYTE_ALGN_ (0x00000000)
+#define TX_CMD_A_INT_16_BYTE_ALGN_ (0x01000000)
+#define TX_CMD_A_INT_32_BYTE_ALGN_ (0x02000000)
+#define TX_CMD_A_INT_DATA_OFFSET_ (0x001F0000)
+#define TX_CMD_A_INT_FIRST_SEG_ (0x00002000)
+#define TX_CMD_A_INT_LAST_SEG_ (0x00001000)
+#define TX_CMD_A_BUF_SIZE_ (0x000007FF)
+#define TX_CMD_B_PKT_TAG_ (0xFFFF0000)
+#define TX_CMD_B_ADD_CRC_DISABLE_ (0x00002000)
+#define TX_CMD_B_DISABLE_PADDING_ (0x00001000)
+#define TX_CMD_B_PKT_BYTE_LENGTH_ (0x000007FF)
+
+#define RX_STATUS_FIFO (0x40)
+#define RX_STS_PKT_LEN_ (0x3FFF0000)
+#define RX_STS_ES_ (0x00008000)
+#define RX_STS_BCST_ (0x00002000)
+#define RX_STS_LEN_ERR_ (0x00001000)
+#define RX_STS_RUNT_ERR_ (0x00000800)
+#define RX_STS_MCAST_ (0x00000400)
+#define RX_STS_TOO_LONG_ (0x00000080)
+#define RX_STS_COLL_ (0x00000040)
+#define RX_STS_ETH_TYPE_ (0x00000020)
+#define RX_STS_WDOG_TMT_ (0x00000010)
+#define RX_STS_MII_ERR_ (0x00000008)
+#define RX_STS_DRIBBLING_ (0x00000004)
+#define RX_STS_CRC_ERR_ (0x00000002)
+#define RX_STATUS_FIFO_PEEK (0x44)
+#define TX_STATUS_FIFO (0x48)
+#define TX_STS_TAG_ (0xFFFF0000)
+#define TX_STS_ES_ (0x00008000)
+#define TX_STS_LOC_ (0x00000800)
+#define TX_STS_NO_CARR_ (0x00000400)
+#define TX_STS_LATE_COLL_ (0x00000200)
+#define TX_STS_MANY_COLL_ (0x00000100)
+#define TX_STS_COLL_CNT_ (0x00000078)
+#define TX_STS_MANY_DEFER_ (0x00000004)
+#define TX_STS_UNDERRUN_ (0x00000002)
+#define TX_STS_DEFERRED_ (0x00000001)
+#define TX_STATUS_FIFO_PEEK (0x4C)
+#define ID_REV (0x50)
+#define ID_REV_CHIP_ID_ (0xFFFF0000) /* RO */
+#define ID_REV_REV_ID_ (0x0000FFFF) /* RO */
+
+#define INT_CFG (0x54)
+#define INT_CFG_INT_DEAS_ (0xFF000000) /* R/W */
+#define INT_CFG_INT_DEAS_CLR_ (0x00004000)
+#define INT_CFG_INT_DEAS_STS_ (0x00002000)
+#define INT_CFG_IRQ_INT_ (0x00001000) /* RO */
+#define INT_CFG_IRQ_EN_ (0x00000100) /* R/W */
+#define INT_CFG_IRQ_POL_ (0x00000010) /* R/W Not Affected by SW Reset */
+#define INT_CFG_IRQ_TYPE_ (0x00000001) /* R/W Not Affected by SW Reset */
+
+#define INT_STS (0x58)
+#define INT_STS_SW_INT_ (0x80000000) /* R/WC */
+#define INT_STS_TXSTOP_INT_ (0x02000000) /* R/WC */
+#define INT_STS_RXSTOP_INT_ (0x01000000) /* R/WC */
+#define INT_STS_RXDFH_INT_ (0x00800000) /* R/WC */
+#define INT_STS_RXDF_INT_ (0x00400000) /* R/WC */
+#define INT_STS_TX_IOC_ (0x00200000) /* R/WC */
+#define INT_STS_RXD_INT_ (0x00100000) /* R/WC */
+#define INT_STS_GPT_INT_ (0x00080000) /* R/WC */
+#define INT_STS_PHY_INT_ (0x00040000) /* RO */
+#define INT_STS_PME_INT_ (0x00020000) /* R/WC */
+#define INT_STS_TXSO_ (0x00010000) /* R/WC */
+#define INT_STS_RWT_ (0x00008000) /* R/WC */
+#define INT_STS_RXE_ (0x00004000) /* R/WC */
+#define INT_STS_TXE_ (0x00002000) /* R/WC */
+//#define INT_STS_ERX_ (0x00001000) /* R/WC */
+#define INT_STS_TDFU_ (0x00000800) /* R/WC */
+#define INT_STS_TDFO_ (0x00000400) /* R/WC */
+#define INT_STS_TDFA_ (0x00000200) /* R/WC */
+#define INT_STS_TSFF_ (0x00000100) /* R/WC */
+#define INT_STS_TSFL_ (0x00000080) /* R/WC */
+//#define INT_STS_RXDF_ (0x00000040) /* R/WC */
+#define INT_STS_RDFO_ (0x00000040) /* R/WC */
+#define INT_STS_RDFL_ (0x00000020) /* R/WC */
+#define INT_STS_RSFF_ (0x00000010) /* R/WC */
+#define INT_STS_RSFL_ (0x00000008) /* R/WC */
+#define INT_STS_GPIO2_INT_ (0x00000004) /* R/WC */
+#define INT_STS_GPIO1_INT_ (0x00000002) /* R/WC */
+#define INT_STS_GPIO0_INT_ (0x00000001) /* R/WC */
+
+#define INT_EN (0x5C)
+#define INT_EN_SW_INT_EN_ (0x80000000) /* R/W */
+#define INT_EN_TXSTOP_INT_EN_ (0x02000000) /* R/W */
+#define INT_EN_RXSTOP_INT_EN_ (0x01000000) /* R/W */
+#define INT_EN_RXDFH_INT_EN_ (0x00800000) /* R/W */
+//#define INT_EN_RXDF_INT_EN_ (0x00400000) /* R/W */
+#define INT_EN_TIOC_INT_EN_ (0x00200000) /* R/W */
+#define INT_EN_RXD_INT_EN_ (0x00100000) /* R/W */
+#define INT_EN_GPT_INT_EN_ (0x00080000) /* R/W */
+#define INT_EN_PHY_INT_EN_ (0x00040000) /* R/W */
+#define INT_EN_PME_INT_EN_ (0x00020000) /* R/W */
+#define INT_EN_TXSO_EN_ (0x00010000) /* R/W */
+#define INT_EN_RWT_EN_ (0x00008000) /* R/W */
+#define INT_EN_RXE_EN_ (0x00004000) /* R/W */
+#define INT_EN_TXE_EN_ (0x00002000) /* R/W */
+//#define INT_EN_ERX_EN_ (0x00001000) /* R/W */
+#define INT_EN_TDFU_EN_ (0x00000800) /* R/W */
+#define INT_EN_TDFO_EN_ (0x00000400) /* R/W */
+#define INT_EN_TDFA_EN_ (0x00000200) /* R/W */
+#define INT_EN_TSFF_EN_ (0x00000100) /* R/W */
+#define INT_EN_TSFL_EN_ (0x00000080) /* R/W */
+//#define INT_EN_RXDF_EN_ (0x00000040) /* R/W */
+#define INT_EN_RDFO_EN_ (0x00000040) /* R/W */
+#define INT_EN_RDFL_EN_ (0x00000020) /* R/W */
+#define INT_EN_RSFF_EN_ (0x00000010) /* R/W */
+#define INT_EN_RSFL_EN_ (0x00000008) /* R/W */
+#define INT_EN_GPIO2_INT_ (0x00000004) /* R/W */
+#define INT_EN_GPIO1_INT_ (0x00000002) /* R/W */
+#define INT_EN_GPIO0_INT_ (0x00000001) /* R/W */
+
+#define BYTE_TEST (0x64)
+#define FIFO_INT (0x68)
+#define FIFO_INT_TX_AVAIL_LEVEL_ (0xFF000000) /* R/W */
+#define FIFO_INT_TX_STS_LEVEL_ (0x00FF0000) /* R/W */
+#define FIFO_INT_RX_AVAIL_LEVEL_ (0x0000FF00) /* R/W */
+#define FIFO_INT_RX_STS_LEVEL_ (0x000000FF) /* R/W */
+
+#define RX_CFG (0x6C)
+#define RX_CFG_RX_END_ALGN_ (0xC0000000) /* R/W */
+#define RX_CFG_RX_END_ALGN4_ (0x00000000) /* R/W */
+#define RX_CFG_RX_END_ALGN16_ (0x40000000) /* R/W */
+#define RX_CFG_RX_END_ALGN32_ (0x80000000) /* R/W */
+#define RX_CFG_RX_DMA_CNT_ (0x0FFF0000) /* R/W */
+#define RX_CFG_RX_DUMP_ (0x00008000) /* R/W */
+#define RX_CFG_RXDOFF_ (0x00001F00) /* R/W */
+//#define RX_CFG_RXBAD_ (0x00000001) /* R/W */
+
+#define TX_CFG (0x70)
+//#define TX_CFG_TX_DMA_LVL_ (0xE0000000) /* R/W */
+//#define TX_CFG_TX_DMA_CNT_ (0x0FFF0000) /* R/W Self Clearing */
+#define TX_CFG_TXS_DUMP_ (0x00008000) /* Self Clearing */
+#define TX_CFG_TXD_DUMP_ (0x00004000) /* Self Clearing */
+#define TX_CFG_TXSAO_ (0x00000004) /* R/W */
+#define TX_CFG_TX_ON_ (0x00000002) /* R/W */
+#define TX_CFG_STOP_TX_ (0x00000001) /* Self Clearing */
+
+#define HW_CFG (0x74)
+#define HW_CFG_TTM_ (0x00200000) /* R/W */
+#define HW_CFG_SF_ (0x00100000) /* R/W */
+#define HW_CFG_TX_FIF_SZ_ (0x000F0000) /* R/W */
+#define HW_CFG_TR_ (0x00003000) /* R/W */
+#define HW_CFG_PHY_CLK_SEL_ (0x00000060) /* R/W */
+#define HW_CFG_PHY_CLK_SEL_INT_PHY_ (0x00000000) /* R/W */
+#define HW_CFG_PHY_CLK_SEL_EXT_PHY_ (0x00000020) /* R/W */
+#define HW_CFG_PHY_CLK_SEL_CLK_DIS_ (0x00000040) /* R/W */
+#define HW_CFG_SMI_SEL_ (0x00000010) /* R/W */
+#define HW_CFG_EXT_PHY_DET_ (0x00000008) /* RO */
+#define HW_CFG_EXT_PHY_EN_ (0x00000004) /* R/W */
+#define HW_CFG_32_16_BIT_MODE_ (0x00000004) /* RO */
+#define HW_CFG_SRST_TO_ (0x00000002) /* RO */
+#define HW_CFG_SRST_ (0x00000001) /* Self Clearing */
+
+#define RX_DP_CTRL (0x78)
+#define RX_DP_CTRL_RX_FFWD_ (0x80000000) /* R/W */
+#define RX_DP_CTRL_FFWD_BUSY_ (0x80000000) /* RO */
+
+#define RX_FIFO_INF (0x7C)
+#define RX_FIFO_INF_RXSUSED_ (0x00FF0000) /* RO */
+#define RX_FIFO_INF_RXDUSED_ (0x0000FFFF) /* RO */
+
+#define TX_FIFO_INF (0x80)
+#define TX_FIFO_INF_TSUSED_ (0x00FF0000) /* RO */
+#define TX_FIFO_INF_TDFREE_ (0x0000FFFF) /* RO */
+
+#define PMT_CTRL (0x84)
+#define PMT_CTRL_PM_MODE_ (0x00003000) /* Self Clearing */
+#define PMT_CTRL_PHY_RST_ (0x00000400) /* Self Clearing */
+#define PMT_CTRL_WOL_EN_ (0x00000200) /* R/W */
+#define PMT_CTRL_ED_EN_ (0x00000100) /* R/W */
+#define PMT_CTRL_PME_TYPE_ (0x00000040) /* R/W Not Affected by SW Reset */
+#define PMT_CTRL_WUPS_ (0x00000030) /* R/WC */
+#define PMT_CTRL_WUPS_NOWAKE_ (0x00000000) /* R/WC */
+#define PMT_CTRL_WUPS_ED_ (0x00000010) /* R/WC */
+#define PMT_CTRL_WUPS_WOL_ (0x00000020) /* R/WC */
+#define PMT_CTRL_WUPS_MULTI_ (0x00000030) /* R/WC */
+#define PMT_CTRL_PME_IND_ (0x00000008) /* R/W */
+#define PMT_CTRL_PME_POL_ (0x00000004) /* R/W */
+#define PMT_CTRL_PME_EN_ (0x00000002) /* R/W Not Affected by SW Reset */
+#define PMT_CTRL_READY_ (0x00000001) /* RO */
+
+#define GPIO_CFG (0x88)
+#define GPIO_CFG_LED3_EN_ (0x40000000) /* R/W */
+#define GPIO_CFG_LED2_EN_ (0x20000000) /* R/W */
+#define GPIO_CFG_LED1_EN_ (0x10000000) /* R/W */
+#define GPIO_CFG_GPIO2_INT_POL_ (0x04000000) /* R/W */
+#define GPIO_CFG_GPIO1_INT_POL_ (0x02000000) /* R/W */
+#define GPIO_CFG_GPIO0_INT_POL_ (0x01000000) /* R/W */
+#define GPIO_CFG_EEPR_EN_ (0x00700000) /* R/W */
+#define GPIO_CFG_GPIOBUF2_ (0x00040000) /* R/W */
+#define GPIO_CFG_GPIOBUF1_ (0x00020000) /* R/W */
+#define GPIO_CFG_GPIOBUF0_ (0x00010000) /* R/W */
+#define GPIO_CFG_GPIODIR2_ (0x00000400) /* R/W */
+#define GPIO_CFG_GPIODIR1_ (0x00000200) /* R/W */
+#define GPIO_CFG_GPIODIR0_ (0x00000100) /* R/W */
+#define GPIO_CFG_GPIOD4_ (0x00000010) /* R/W */
+#define GPIO_CFG_GPIOD3_ (0x00000008) /* R/W */
+#define GPIO_CFG_GPIOD2_ (0x00000004) /* R/W */
+#define GPIO_CFG_GPIOD1_ (0x00000002) /* R/W */
+#define GPIO_CFG_GPIOD0_ (0x00000001) /* R/W */
+
+#define GPT_CFG (0x8C)
+#define GPT_CFG_TIMER_EN_ (0x20000000) /* R/W */
+#define GPT_CFG_GPT_LOAD_ (0x0000FFFF) /* R/W */
+
+#define GPT_CNT (0x90)
+#define GPT_CNT_GPT_CNT_ (0x0000FFFF) /* RO */
+
+#define ENDIAN (0x98)
+#define FREE_RUN (0x9C)
+#define RX_DROP (0xA0)
+#define MAC_CSR_CMD (0xA4)
+#define MAC_CSR_CMD_CSR_BUSY_ (0x80000000) /* Self Clearing */
+#define MAC_CSR_CMD_R_NOT_W_ (0x40000000) /* R/W */
+#define MAC_CSR_CMD_CSR_ADDR_ (0x000000FF) /* R/W */
+
+#define MAC_CSR_DATA (0xA8)
+#define AFC_CFG (0xAC)
+#define AFC_CFG_AFC_HI_ (0x00FF0000) /* R/W */
+#define AFC_CFG_AFC_LO_ (0x0000FF00) /* R/W */
+#define AFC_CFG_BACK_DUR_ (0x000000F0) /* R/W */
+#define AFC_CFG_FCMULT_ (0x00000008) /* R/W */
+#define AFC_CFG_FCBRD_ (0x00000004) /* R/W */
+#define AFC_CFG_FCADD_ (0x00000002) /* R/W */
+#define AFC_CFG_FCANY_ (0x00000001) /* R/W */
+
+#define E2P_CMD (0xB0)
+#define E2P_CMD_EPC_BUSY_ (0x80000000) /* Self Clearing */
+#define E2P_CMD_EPC_CMD_ (0x70000000) /* R/W */
+#define E2P_CMD_EPC_CMD_READ_ (0x00000000) /* R/W */
+#define E2P_CMD_EPC_CMD_EWDS_ (0x10000000) /* R/W */
+#define E2P_CMD_EPC_CMD_EWEN_ (0x20000000) /* R/W */
+#define E2P_CMD_EPC_CMD_WRITE_ (0x30000000) /* R/W */
+#define E2P_CMD_EPC_CMD_WRAL_ (0x40000000) /* R/W */
+#define E2P_CMD_EPC_CMD_ERASE_ (0x50000000) /* R/W */
+#define E2P_CMD_EPC_CMD_ERAL_ (0x60000000) /* R/W */
+#define E2P_CMD_EPC_CMD_RELOAD_ (0x70000000) /* R/W */
+#define E2P_CMD_EPC_TIMEOUT_ (0x00000200) /* RO */
+#define E2P_CMD_MAC_ADDR_LOADED_ (0x00000100) /* RO */
+#define E2P_CMD_EPC_ADDR_ (0x000000FF) /* R/W */
+
+#define E2P_DATA (0xB4)
+#define E2P_DATA_EEPROM_DATA_ (0x000000FF) /* R/W */
+/* end of LAN register offsets and bit definitions */
+
+/*
+ ****************************************************************************
+ ****************************************************************************
+ * MAC Control and Status Register (Indirect Address)
+ * Offset (through the MAC_CSR CMD and DATA port)
+ ****************************************************************************
+ ****************************************************************************
+ *
+ */
+#define MAC_CR (0x01) /* R/W */
+
+/* MAC_CR - MAC Control Register */
+#define MAC_CR_RXALL_ (0x80000000)
+// TODO: delete this bit? It is not described in the data sheet.
+#define MAC_CR_HBDIS_ (0x10000000)
+#define MAC_CR_RCVOWN_ (0x00800000)
+#define MAC_CR_LOOPBK_ (0x00200000)
+#define MAC_CR_FDPX_ (0x00100000)
+#define MAC_CR_MCPAS_ (0x00080000)
+#define MAC_CR_PRMS_ (0x00040000)
+#define MAC_CR_INVFILT_ (0x00020000)
+#define MAC_CR_PASSBAD_ (0x00010000)
+#define MAC_CR_HFILT_ (0x00008000)
+#define MAC_CR_HPFILT_ (0x00002000)
+#define MAC_CR_LCOLL_ (0x00001000)
+#define MAC_CR_BCAST_ (0x00000800)
+#define MAC_CR_DISRTY_ (0x00000400)
+#define MAC_CR_PADSTR_ (0x00000100)
+#define MAC_CR_BOLMT_MASK_ (0x000000C0)
+#define MAC_CR_DFCHK_ (0x00000020)
+#define MAC_CR_TXEN_ (0x00000008)
+#define MAC_CR_RXEN_ (0x00000004)
+
+#define ADDRH (0x02) /* R/W mask 0x0000FFFFUL */
+#define ADDRL (0x03) /* R/W mask 0xFFFFFFFFUL */
+#define HASHH (0x04) /* R/W */
+#define HASHL (0x05) /* R/W */
+
+#define MII_ACC (0x06) /* R/W */
+#define MII_ACC_PHY_ADDR_ (0x0000F800)
+#define MII_ACC_MIIRINDA_ (0x000007C0)
+#define MII_ACC_MII_WRITE_ (0x00000002)
+#define MII_ACC_MII_BUSY_ (0x00000001)
+
+#define MII_DATA (0x07) /* R/W mask 0x0000FFFFUL */
+
+#define FLOW (0x08) /* R/W */
+#define FLOW_FCPT_ (0xFFFF0000)
+#define FLOW_FCPASS_ (0x00000004)
+#define FLOW_FCEN_ (0x00000002)
+#define FLOW_FCBSY_ (0x00000001)
+
+#define VLAN1 (0x09) /* R/W mask 0x0000FFFFUL */
+#define VLAN1_VTI1_ (0x0000ffff)
+
+#define VLAN2 (0x0A) /* R/W mask 0x0000FFFFUL */
+#define VLAN2_VTI2_ (0x0000ffff)
+
+#define WUFF (0x0B) /* WO */
+
+#define WUCSR (0x0C) /* R/W */
+#define WUCSR_GUE_ (0x00000200)
+#define WUCSR_WUFR_ (0x00000040)
+#define WUCSR_MPR_ (0x00000020)
+#define WUCSR_WAKE_EN_ (0x00000004)
+#define WUCSR_MPEN_ (0x00000002)
+
+/*
+ ****************************************************************************
+ * Chip Specific MII Defines
+ ****************************************************************************
+ *
+ * Phy register offsets and bit definitions
+ *
+ */
+
+#define PHY_MODE_CTRL_STS ((u32)17) /* Mode Control/Status Register */
+//#define MODE_CTRL_STS_FASTRIP_ ((u16)0x4000)
+#define MODE_CTRL_STS_EDPWRDOWN_ ((u16)0x2000)
+//#define MODE_CTRL_STS_LOWSQEN_ ((u16)0x0800)
+//#define MODE_CTRL_STS_MDPREBP_ ((u16)0x0400)
+//#define MODE_CTRL_STS_FARLOOPBACK_ ((u16)0x0200)
+//#define MODE_CTRL_STS_FASTEST_ ((u16)0x0100)
+//#define MODE_CTRL_STS_REFCLKEN_ ((u16)0x0010)
+//#define MODE_CTRL_STS_PHYADBP_ ((u16)0x0008)
+//#define MODE_CTRL_STS_FORCE_G_LINK_ ((u16)0x0004)
+#define MODE_CTRL_STS_ENERGYON_ ((u16)0x0002)
+
+#define PHY_INT_SRC ((u32)29)
+#define PHY_INT_SRC_ENERGY_ON_ ((u16)0x0080)
+#define PHY_INT_SRC_ANEG_COMP_ ((u16)0x0040)
+#define PHY_INT_SRC_REMOTE_FAULT_ ((u16)0x0020)
+#define PHY_INT_SRC_LINK_DOWN_ ((u16)0x0010)
+#define PHY_INT_SRC_ANEG_LP_ACK_ ((u16)0x0008)
+#define PHY_INT_SRC_PAR_DET_FAULT_ ((u16)0x0004)
+#define PHY_INT_SRC_ANEG_PGRX_ ((u16)0x0002)
+
+#define PHY_INT_MASK ((u32)30)
+#define PHY_INT_MASK_ENERGY_ON_ ((u16)0x0080)
+#define PHY_INT_MASK_ANEG_COMP_ ((u16)0x0040)
+#define PHY_INT_MASK_REMOTE_FAULT_ ((u16)0x0020)
+#define PHY_INT_MASK_LINK_DOWN_ ((u16)0x0010)
+#define PHY_INT_MASK_ANEG_LP_ACK_ ((u16)0x0008)
+#define PHY_INT_MASK_PAR_DET_FAULT_ ((u16)0x0004)
+#define PHY_INT_MASK_ANEG_PGRX_ ((u16)0x0002)
+
+#define PHY_SPECIAL ((u32)31)
+#define PHY_SPECIAL_ANEG_DONE_ ((u16)0x1000)
+#define PHY_SPECIAL_RES_ ((u16)0x0040)
+#define PHY_SPECIAL_RES_MASK_ ((u16)0x0FE1)
+#define PHY_SPECIAL_SPD_ ((u16)0x001C)
+#define PHY_SPECIAL_SPD_10HALF_ ((u16)0x0004)
+#define PHY_SPECIAL_SPD_10FULL_ ((u16)0x0014)
+#define PHY_SPECIAL_SPD_100HALF_ ((u16)0x0008)
+#define PHY_SPECIAL_SPD_100FULL_ ((u16)0x0018)
+
+#define LAN911X_INTERNAL_PHY_ID (0x0007C000)
+
+/* Chip ID values */
+#define CHIP_9115 0x115
+#define CHIP_9116 0x116
+#define CHIP_9117 0x117
+#define CHIP_9118 0x118
+
+struct chip_id {
+ u16 id;
+ char *name;
+};
+
+static const struct chip_id chip_ids[] = {
+ { CHIP_9115, "LAN9115" },
+ { CHIP_9116, "LAN9116" },
+ { CHIP_9117, "LAN9117" },
+ { CHIP_9118, "LAN9118" },
+ { 0, NULL },
+};
+
+#define IS_REV_A(x) ((x & 0xFFFF)==0)
+
+/*
+ * Macros to abstract register access according to the data bus
+ * capabilities. Please use those and not the in/out primitives.
+ */
+/* FIFO read/write macros */
+#define SMC_PUSH_DATA(p, l) SMC_outsl( ioaddr, TX_DATA_FIFO, p, (l) >> 2 )
+#define SMC_PULL_DATA(p, l) SMC_insl ( ioaddr, RX_DATA_FIFO, p, (l) >> 2 )
+#define SMC_SET_TX_FIFO(x) SMC_outl( x, ioaddr, TX_DATA_FIFO )
+#define SMC_GET_RX_FIFO() SMC_inl( ioaddr, RX_DATA_FIFO )
+
+
+/* I/O mapped register read/write macros */
+#define SMC_GET_TX_STS_FIFO() SMC_inl( ioaddr, TX_STATUS_FIFO )
+#define SMC_GET_RX_STS_FIFO() SMC_inl( ioaddr, RX_STATUS_FIFO )
+#define SMC_GET_RX_STS_FIFO_PEEK() SMC_inl( ioaddr, RX_STATUS_FIFO_PEEK )
+#define SMC_GET_PN() (SMC_inl( ioaddr, ID_REV ) >> 16)
+#define SMC_GET_REV() (SMC_inl( ioaddr, ID_REV ) & 0xFFFF)
+#define SMC_GET_IRQ_CFG() SMC_inl( ioaddr, INT_CFG )
+#define SMC_SET_IRQ_CFG(x) SMC_outl( x, ioaddr, INT_CFG )
+#define SMC_GET_INT() SMC_inl( ioaddr, INT_STS )
+#define SMC_ACK_INT(x) SMC_outl( x, ioaddr, INT_STS )
+#define SMC_GET_INT_EN() SMC_inl( ioaddr, INT_EN )
+#define SMC_SET_INT_EN(x) SMC_outl( x, ioaddr, INT_EN )
+#define SMC_GET_BYTE_TEST() SMC_inl( ioaddr, BYTE_TEST )
+#define SMC_SET_BYTE_TEST(x) SMC_outl( x, ioaddr, BYTE_TEST )
+#define SMC_GET_FIFO_INT() SMC_inl( ioaddr, FIFO_INT )
+#define SMC_SET_FIFO_INT(x) SMC_outl( x, ioaddr, FIFO_INT )
+#define SMC_SET_FIFO_TDA(x) \
+ do { \
+ unsigned long __flags; \
+ int __mask; \
+ local_irq_save(__flags); \
+ __mask = SMC_GET_FIFO_INT() & ~(0xFF<<24); \
+ SMC_SET_FIFO_INT( __mask | (x)<<24 ); \
+ local_irq_restore(__flags); \
+ } while (0)
+#define SMC_SET_FIFO_TSL(x) \
+ do { \
+ unsigned long __flags; \
+ int __mask; \
+ local_irq_save(__flags); \
+ __mask = SMC_GET_FIFO_INT() & ~(0xFF<<16); \
+ SMC_SET_FIFO_INT( __mask | (((x) & 0xFF)<<16)); \
+ local_irq_restore(__flags); \
+ } while (0)
+#define SMC_SET_FIFO_RSA(x) \
+ do { \
+ unsigned long __flags; \
+ int __mask; \
+ local_irq_save(__flags); \
+ __mask = SMC_GET_FIFO_INT() & ~(0xFF<<8); \
+ SMC_SET_FIFO_INT( __mask | (((x) & 0xFF)<<8)); \
+ local_irq_restore(__flags); \
+ } while (0)
+#define SMC_SET_FIFO_RSL(x) \
+ do { \
+ unsigned long __flags; \
+ int __mask; \
+ local_irq_save(__flags); \
+ __mask = SMC_GET_FIFO_INT() & ~0xFF; \
+ SMC_SET_FIFO_INT( __mask | ((x) & 0xFF)); \
+ local_irq_restore(__flags); \
+ } while (0)
+#define SMC_GET_RX_CFG() SMC_inl( ioaddr, RX_CFG )
+#define SMC_SET_RX_CFG(x) SMC_outl( x, ioaddr, RX_CFG )
+#define SMC_GET_TX_CFG() SMC_inl( ioaddr, TX_CFG )
+#define SMC_SET_TX_CFG(x) SMC_outl( x, ioaddr, TX_CFG )
+#define SMC_GET_HW_CFG() SMC_inl( ioaddr, HW_CFG )
+#define SMC_SET_HW_CFG(x) SMC_outl( x, ioaddr, HW_CFG )
+#define SMC_GET_RX_DP_CTRL() SMC_inl( ioaddr, RX_DP_CTRL )
+#define SMC_SET_RX_DP_CTRL(x) SMC_outl( x, ioaddr, RX_DP_CTRL )
+#define SMC_GET_PMT_CTRL() SMC_inl( ioaddr, PMT_CTRL )
+#define SMC_SET_PMT_CTRL(x) SMC_outl( x, ioaddr, PMT_CTRL )
+#define SMC_GET_GPIO_CFG() SMC_inl( ioaddr, GPIO_CFG )
+#define SMC_SET_GPIO_CFG(x) SMC_outl( x, ioaddr, GPIO_CFG )
+#define SMC_GET_RX_FIFO_INF() SMC_inl( ioaddr, RX_FIFO_INF )
+#define SMC_SET_RX_FIFO_INF(x) SMC_outl( x, ioaddr, RX_FIFO_INF )
+#define SMC_GET_TX_FIFO_INF() SMC_inl( ioaddr, TX_FIFO_INF )
+#define SMC_SET_TX_FIFO_INF(x) SMC_outl( x, ioaddr, TX_FIFO_INF )
+#define SMC_GET_GPT_CFG() SMC_inl( ioaddr, GPT_CFG )
+#define SMC_SET_GPT_CFG(x) SMC_outl( x, ioaddr, GPT_CFG )
+#define SMC_GET_RX_DROP() SMC_inl( ioaddr, RX_DROP )
+#define SMC_SET_RX_DROP(x) SMC_outl( x, ioaddr, RX_DROP )
+#define SMC_GET_MAC_CMD() SMC_inl( ioaddr, MAC_CSR_CMD )
+#define SMC_SET_MAC_CMD(x) SMC_outl( x, ioaddr, MAC_CSR_CMD )
+#define SMC_GET_MAC_DATA() SMC_inl( ioaddr, MAC_CSR_DATA )
+#define SMC_SET_MAC_DATA(x) SMC_outl( x, ioaddr, MAC_CSR_DATA )
+#define SMC_GET_AFC_CFG() SMC_inl( ioaddr, AFC_CFG )
+#define SMC_SET_AFC_CFG(x) SMC_outl( x, ioaddr, AFC_CFG )
+#define SMC_GET_E2P_CMD() SMC_inl( ioaddr, E2P_CMD )
+#define SMC_SET_E2P_CMD(x) SMC_outl( x, ioaddr, E2P_CMD )
+#define SMC_GET_E2P_DATA() SMC_inl( ioaddr, E2P_DATA )
+#define SMC_SET_E2P_DATA(x) SMC_outl( x, ioaddr, E2P_DATA )
+
+/* MAC register read/write macros */
+#define SMC_GET_MAC_CSR(a,v) \
+ do { \
+ while (SMC_GET_MAC_CMD() & MAC_CSR_CMD_CSR_BUSY_); \
+ SMC_SET_MAC_CMD(MAC_CSR_CMD_CSR_BUSY_ | \
+ MAC_CSR_CMD_R_NOT_W_ | (a) ); \
+ while (SMC_GET_MAC_CMD() & MAC_CSR_CMD_CSR_BUSY_); \
+ v = SMC_GET_MAC_DATA(); \
+ } while (0)
+#define SMC_SET_MAC_CSR(a,v) \
+ do { \
+ while (SMC_GET_MAC_CMD() & MAC_CSR_CMD_CSR_BUSY_); \
+ SMC_SET_MAC_DATA(v); \
+ SMC_SET_MAC_CMD(MAC_CSR_CMD_CSR_BUSY_ | (a) ); \
+ while (SMC_GET_MAC_CMD() & MAC_CSR_CMD_CSR_BUSY_); \
+ } while (0)
+#define SMC_GET_MAC_CR(x) SMC_GET_MAC_CSR( MAC_CR, x )
+#define SMC_SET_MAC_CR(x) SMC_SET_MAC_CSR( MAC_CR, x )
+#define SMC_GET_ADDRH(x) SMC_GET_MAC_CSR( ADDRH, x )
+#define SMC_SET_ADDRH(x) SMC_SET_MAC_CSR( ADDRH, x )
+#define SMC_GET_ADDRL(x) SMC_GET_MAC_CSR( ADDRL, x )
+#define SMC_SET_ADDRL(x) SMC_SET_MAC_CSR( ADDRL, x )
+#define SMC_GET_HASHH(x) SMC_GET_MAC_CSR( HASHH, x )
+#define SMC_SET_HASHH(x) SMC_SET_MAC_CSR( HASHH, x )
+#define SMC_GET_HASHL(x) SMC_GET_MAC_CSR( HASHL, x )
+#define SMC_SET_HASHL(x) SMC_SET_MAC_CSR( HASHL, x )
+#define SMC_GET_MII_ACC(x) SMC_GET_MAC_CSR( MII_ACC, x )
+#define SMC_SET_MII_ACC(x) SMC_SET_MAC_CSR( MII_ACC, x )
+#define SMC_GET_MII_DATA(x) SMC_GET_MAC_CSR( MII_DATA, x )
+#define SMC_SET_MII_DATA(x) SMC_SET_MAC_CSR( MII_DATA, x )
+#define SMC_GET_FLOW(x) SMC_GET_MAC_CSR( FLOW, x )
+#define SMC_SET_FLOW(x) SMC_SET_MAC_CSR( FLOW, x )
+#define SMC_GET_VLAN1(x) SMC_GET_MAC_CSR( VLAN1, x )
+#define SMC_SET_VLAN1(x) SMC_SET_MAC_CSR( VLAN1, x )
+#define SMC_GET_VLAN2(x) SMC_GET_MAC_CSR( VLAN2, x )
+#define SMC_SET_VLAN2(x) SMC_SET_MAC_CSR( VLAN2, x )
+#define SMC_SET_WUFF(x) SMC_SET_MAC_CSR( WUFF, x )
+#define SMC_GET_WUCSR(x) SMC_GET_MAC_CSR( WUCSR, x )
+#define SMC_SET_WUCSR(x) SMC_SET_MAC_CSR( WUCSR, x )
+
+/* PHY register read/write macros */
+#define SMC_GET_MII(a,phy,v) \
+ do { \
+ u32 __v; \
+ do { \
+ SMC_GET_MII_ACC(__v); \
+ } while ( __v & MII_ACC_MII_BUSY_ ); \
+ SMC_SET_MII_ACC( ((phy)<<11) | ((a)<<6) | \
+ MII_ACC_MII_BUSY_); \
+ do { \
+ SMC_GET_MII_ACC(__v); \
+ } while ( __v & MII_ACC_MII_BUSY_ ); \
+ SMC_GET_MII_DATA(v); \
+ } while (0)
+#define SMC_SET_MII(a,phy,v) \
+ do { \
+ u32 __v; \
+ do { \
+ SMC_GET_MII_ACC(__v); \
+ } while ( __v & MII_ACC_MII_BUSY_ ); \
+ SMC_SET_MII_DATA(v); \
+ SMC_SET_MII_ACC( ((phy)<<11) | ((a)<<6) | \
+ MII_ACC_MII_BUSY_ | \
+ MII_ACC_MII_WRITE_ ); \
+ do { \
+ SMC_GET_MII_ACC(__v); \
+ } while ( __v & MII_ACC_MII_BUSY_ ); \
+ } while (0)
+#define SMC_GET_PHY_BMCR(phy,x) SMC_GET_MII( MII_BMCR, phy, x )
+#define SMC_SET_PHY_BMCR(phy,x) SMC_SET_MII( MII_BMCR, phy, x )
+#define SMC_GET_PHY_BMSR(phy,x) SMC_GET_MII( MII_BMSR, phy, x )
+#define SMC_GET_PHY_ID1(phy,x) SMC_GET_MII( MII_PHYSID1, phy, x )
+#define SMC_GET_PHY_ID2(phy,x) SMC_GET_MII( MII_PHYSID2, phy, x )
+#define SMC_GET_PHY_MII_ADV(phy,x) SMC_GET_MII( MII_ADVERTISE, phy, x )
+#define SMC_SET_PHY_MII_ADV(phy,x) SMC_SET_MII( MII_ADVERTISE, phy, x )
+#define SMC_GET_PHY_MII_LPA(phy,x) SMC_GET_MII( MII_LPA, phy, x )
+#define SMC_SET_PHY_MII_LPA(phy,x) SMC_SET_MII( MII_LPA, phy, x )
+#define SMC_GET_PHY_CTRL_STS(phy,x) SMC_GET_MII( PHY_MODE_CTRL_STS, phy, x )
+#define SMC_SET_PHY_CTRL_STS(phy,x) SMC_SET_MII( PHY_MODE_CTRL_STS, phy, x )
+#define SMC_GET_PHY_INT_SRC(phy,x) SMC_GET_MII( PHY_INT_SRC, phy, x )
+#define SMC_SET_PHY_INT_SRC(phy,x) SMC_SET_MII( PHY_INT_SRC, phy, x )
+#define SMC_GET_PHY_INT_MASK(phy,x) SMC_GET_MII( PHY_INT_MASK, phy, x )
+#define SMC_SET_PHY_INT_MASK(phy,x) SMC_SET_MII( PHY_INT_MASK, phy, x )
+#define SMC_GET_PHY_SPECIAL(phy,x) SMC_GET_MII( PHY_SPECIAL, phy, x )
+
+
+
+/* Misc read/write macros */
+
+#ifndef SMC_GET_MAC_ADDR
+#define SMC_GET_MAC_ADDR(addr) \
+ do { \
+ unsigned int __v; \
+ \
+ SMC_GET_MAC_CSR(ADDRL, __v); \
+ addr[0] = __v; addr[1] = __v >> 8; \
+ addr[2] = __v >> 16; addr[3] = __v >> 24; \
+ SMC_GET_MAC_CSR(ADDRH, __v); \
+ addr[4] = __v; addr[5] = __v >> 8; \
+ } while (0)
+#endif
+
+#define SMC_SET_MAC_ADDR(addr) \
+ do { \
+ SMC_SET_MAC_CSR(ADDRL, \
+ addr[0] | \
+ (addr[1] << 8) | \
+ (addr[2] << 16) | \
+ (addr[3] << 24)); \
+ SMC_SET_MAC_CSR(ADDRH, addr[4]|(addr[5] << 8));\
+ } while (0)
+
+
+#define SMC_WRITE_EEPROM_CMD(cmd, addr) \
+ do { \
+ while (SMC_GET_E2P_CMD() & MAC_CSR_CMD_CSR_BUSY_); \
+ SMC_SET_MAC_CMD(MAC_CSR_CMD_R_NOT_W_ | a ); \
+ while (SMC_GET_MAC_CMD() & MAC_CSR_CMD_CSR_BUSY_); \
+ } while (0)
+
+#endif /* _SMC911X_H_ */
^ permalink raw reply [flat|nested] 2+ messages in thread