From: Daniel Walker <dwalker@mvista.com>
To: akpm@osdl.org
Cc: edward_peng@dlink.com.tw, netdev@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH -mm] updated dl2k gcc 4.1 warning fix
Date: Wed, 10 May 2006 11:12:51 -0700 [thread overview]
Message-ID: <200605101812.k4AICpRo006555@dwalker1.mvista.com> (raw)
Fixes the following warning,
drivers/net/dl2k.c: In function 'rio_free_tx':
drivers/net/dl2k.c:768: warning: integer constant is too large for 'long' type
drivers/net/dl2k.c: In function 'receive_packet':
drivers/net/dl2k.c:896: warning: integer constant is too large for 'long' type
drivers/net/dl2k.c:904: warning: integer constant is too large for 'long' type
drivers/net/dl2k.c:916: warning: integer constant is too large for 'long' type
drivers/net/dl2k.c: In function 'rio_close':
drivers/net/dl2k.c:1803: warning: integer constant is too large for 'long' type
drivers/net/dl2k.c:1813: warning: integer constant is too large for 'long' type
Signed-Off-By: Daniel Walker <dwalker@mvista.com>
Index: linux-2.6.16/drivers/net/dl2k.c
===================================================================
--- linux-2.6.16.orig/drivers/net/dl2k.c
+++ linux-2.6.16/drivers/net/dl2k.c
@@ -765,7 +765,8 @@ rio_free_tx (struct net_device *dev, int
break;
skb = np->tx_skbuff[entry];
pci_unmap_single (np->pdev,
- np->tx_ring[entry].fraginfo & 0xffffffffffff,
+ np->tx_ring[entry].fraginfo &
+ 0xffffffffffffULL,
skb->len, PCI_DMA_TODEVICE);
if (irq)
dev_kfree_skb_irq (skb);
@@ -893,7 +894,8 @@ receive_packet (struct net_device *dev)
/* Small skbuffs for short packets */
if (pkt_len > copy_thresh) {
pci_unmap_single (np->pdev,
- desc->fraginfo & 0xffffffffffff,
+ desc->fraginfo &
+ 0xffffffffffffULL,
np->rx_buf_sz,
PCI_DMA_FROMDEVICE);
skb_put (skb = np->rx_skbuff[entry], pkt_len);
@@ -901,7 +903,7 @@ receive_packet (struct net_device *dev)
} else if ((skb = dev_alloc_skb (pkt_len + 2)) != NULL) {
pci_dma_sync_single_for_cpu(np->pdev,
desc->fraginfo &
- 0xffffffffffff,
+ 0xffffffffffffULL,
np->rx_buf_sz,
PCI_DMA_FROMDEVICE);
skb->dev = dev;
@@ -912,8 +914,8 @@ receive_packet (struct net_device *dev)
pkt_len, 0);
skb_put (skb, pkt_len);
pci_dma_sync_single_for_device(np->pdev,
- desc->fraginfo &
- 0xffffffffffff,
+ desc->fraginfo &
+ 0xffffffffffffULL,
np->rx_buf_sz,
PCI_DMA_FROMDEVICE);
}
@@ -1800,7 +1802,8 @@ rio_close (struct net_device *dev)
skb = np->rx_skbuff[i];
if (skb) {
pci_unmap_single(np->pdev,
- np->rx_ring[i].fraginfo & 0xffffffffffff,
+ np->rx_ring[i].fraginfo &
+ 0xffffffffffffULL,
skb->len, PCI_DMA_FROMDEVICE);
dev_kfree_skb (skb);
np->rx_skbuff[i] = NULL;
@@ -1810,7 +1813,8 @@ rio_close (struct net_device *dev)
skb = np->tx_skbuff[i];
if (skb) {
pci_unmap_single(np->pdev,
- np->tx_ring[i].fraginfo & 0xffffffffffff,
+ np->tx_ring[i].fraginfo &
+ 0xffffffffffffULL,
skb->len, PCI_DMA_TODEVICE);
dev_kfree_skb (skb);
np->tx_skbuff[i] = NULL;
next reply other threads:[~2006-05-10 18:13 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-05-10 18:12 Daniel Walker [this message]
2006-05-10 18:57 ` [PATCH] dl2k: use explicit DMA_48BIT_MASK Francois Romieu
2006-05-10 23:52 ` Jon Mason
2006-05-11 19:23 ` Francois Romieu
2006-05-11 19:45 ` Francois Romieu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200605101812.k4AICpRo006555@dwalker1.mvista.com \
--to=dwalker@mvista.com \
--cc=akpm@osdl.org \
--cc=edward_peng@dlink.com.tw \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®