From: Catalin Marinas <catalin.marinas@gmail.com>
To: linux-kernel@vger.kernel.org
Subject: [PATCH 2.6.17-rc4 2/6] Some documentation for kmemleak
Date: Sat, 13 May 2006 17:05:58 +0100 [thread overview]
Message-ID: <20060513160558.8848.46610.stgit@localhost.localdomain> (raw)
In-Reply-To: <20060513155757.8848.11980.stgit@localhost.localdomain>
From: Catalin Marinas <catalin.marinas@gmail.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
Documentation/kmemleak.txt | 94 ++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 94 insertions(+), 0 deletions(-)
diff --git a/Documentation/kmemleak.txt b/Documentation/kmemleak.txt
new file mode 100644
index 0000000..2c36cbb
--- /dev/null
+++ b/Documentation/kmemleak.txt
@@ -0,0 +1,94 @@
+Kernel Memory Leak Detector
+===========================
+
+
+Introduction
+------------
+
+Kmemleak provides a way of detecting possible kernel memory leaks in a
+way similar to a tracing garbage collector
+(http://en.wikipedia.org/wiki/Garbage_collection_%28computer_science%29#Tracing_garbage_collectors),
+with the difference that the orphan pointers are not freed but only
+reported via /proc/memleak. A similar method is used by the Valgrind
+tool (memcheck --leak-check) to detect the memory leaks in user-space
+applications.
+
+
+Basic Algorithm
+---------------
+
+The memory allocations via kmalloc, vmalloc, kmem_cache_alloc and
+friends are tracked and the pointers, together with additional
+information like size and stack trace, are stored in a radix tree. The
+corresponding freeing function calls are tracked and the pointers
+removed from the radix tree.
+
+An allocated block of memory is considered orphan if a pointer to its
+start address or to an alias (pointer aliases are explained later)
+cannot be found by scanning the memory (including saved
+registers). This means that there might be no way for the kernel to
+pass the address of the allocated block to a freeing function and
+therefore the block is considered a leak.
+
+The scanning algorithm steps:
+
+ 1. mark all pointers as white (remaining white pointers will later
+ be considered orphan)
+ 2. scan the memory starting with the data section and stacks,
+ checking the values against the addresses stored in the radix
+ tree. If a white pointer is found, it is added to the grey list
+ 3. scan the grey pointers for matching addresses (some white
+ pointers can become grey and added at the end of the grey list)
+ until the grey set is finished
+ 4. the remaining white pointers are considered orphan and reported
+ via /proc/memleak
+
+
+Improvements
+------------
+
+Because the Linux kernel calculates many pointers at run-time via the
+container_of macro (see the lists implementation), a lot of false
+positives would be reported. This tool re-writes the container_of
+macro so that the offset and size information is stored in the
+.init.memleak_offsets section. The memleak_init() function creates a
+radix tree with corresponding offsets for every encountered block
+size. The memory allocations hook stores the pointer address together
+with its aliases based on the size of the allocated block.
+
+While one level of offsets should be enough for most cases, two levels
+are considered, i.e. container_of(container_of(...)) (one false
+positive is the "struct socket_alloc" allocation in the
+sock_alloc_inode() function).
+
+Some allocated memory blocks have pointers stored in the kernel's
+internal data structures and they cannot be detected as orphans. To
+avoid this, kmemleak can also store the number of values equal to the
+pointer (or aliases) that need to be found so that the block is not
+considered a leak. One example is __vmalloc().
+
+
+Limitations and Drawbacks
+-------------------------
+
+The biggest drawback is the reduced performance of memory allocation
+and freeing. To avoid other penalties, the memory scanning is only
+performed when the /proc/memleak file is read. Anyway, this tool is
+intended for debugging purposes where the performance might not be the
+most important requirement.
+
+The tool can report false positives. These are cases where an
+allocated block doesn't need to be freed (some cases in the init_call
+functions), the pointer is calculated by other methods than the
+container_of macro or the pointer is stored in a location not scanned
+by kmemleak. If the "member" argument in the offsetof(type, member)
+call is not constant, kmemleak considers the offset as zero since it
+cannot be determined at compilation time (as a side node, it seems
+that gcc-4.0 doesn't compile these offsetof constructs either).
+
+Page allocations and ioremap are not tracked (yet).
+
+NUMA architectures are not supported. The tool wasn't tested on SMP
+hardware.
+
+Only the ARM and i386 architectures are currently supported.
next prev parent reply other threads:[~2006-05-13 16:06 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-05-13 15:57 [RFC PATCH 2.6.17-rc4 0/6] Kernel memory leak detector Catalin Marinas
2006-05-13 16:05 ` [PATCH 2.6.17-rc4 1/6] Base support for kmemleak Catalin Marinas
2006-05-13 17:42 ` Jesper Juhl
2006-05-13 17:47 ` Roland Dreier
2006-05-14 7:24 ` Catalin Marinas
2006-05-14 17:32 ` Ingo Oeser
2006-05-15 10:15 ` Catalin Marinas
2006-05-13 18:11 ` Paul Jackson
2006-05-13 23:20 ` Andi Kleen
2006-05-14 8:19 ` Catalin Marinas
2006-05-15 9:15 ` Andi Kleen
2006-05-15 10:09 ` Catalin Marinas
2006-05-26 8:59 ` Ingo Molnar
2006-05-26 9:39 ` Andi Kleen
2006-05-26 11:31 ` Ingo Molnar
2006-05-26 16:37 ` Catalin Marinas
2006-05-26 17:47 ` Ingo Molnar
2006-05-26 21:49 ` Catalin Marinas
2006-05-26 22:01 ` Catalin Marinas
2006-05-14 14:53 ` Pekka Enberg
2006-05-14 15:30 ` Catalin Marinas
2006-05-14 15:52 ` Catalin Marinas
2006-05-13 16:05 ` Catalin Marinas [this message]
2006-05-13 16:06 ` [PATCH 2.6.17-rc4 3/6] Add the memory allocation/freeing hooks " Catalin Marinas
2006-05-14 14:49 ` Pekka Enberg
2006-05-13 16:06 ` [PATCH 2.6.17-rc4 4/6] Add kmemleak support for i386 Catalin Marinas
2006-05-13 18:24 ` Jesper Juhl
2006-05-13 21:20 ` Jan Engelhardt
2006-05-14 7:28 ` Catalin Marinas
2006-05-13 16:06 ` [PATCH 2.6.17-rc4 5/6] Add kmemleak support for ARM Catalin Marinas
2006-05-13 18:25 ` Jesper Juhl
2006-05-13 16:06 ` [PATCH 2.6.17-rc4 6/6] Remove some of the kmemleak false positives Catalin Marinas
2006-05-13 19:21 ` Jesper Juhl
2006-05-14 7:31 ` Catalin Marinas
2006-05-14 14:55 ` Pekka Enberg
2006-05-14 15:39 ` Catalin Marinas
2006-05-14 17:39 ` Ingo Oeser
2006-05-15 10:12 ` Catalin Marinas
2006-05-15 18:32 ` Ingo Oeser
2006-05-15 11:52 ` Avi Kivity
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20060513160558.8848.46610.stgit@localhost.localdomain \
--to=catalin.marinas@gmail.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome