[PATCH 2/2] list.h doc: change "counter" to "control"

[PATCH 2/2] list.h doc: change "counter" to "control"

[Randy.Dunlap]

From: Randy Dunlap <rdunlap@xenotime.net>

Use loop "control" instead of loop "counter" for list iterator
descriptions.  They are not counters, they are controls or
pointers or positions.

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
---
 include/linux/list.h |   52 +++++++++++++++++++++++++--------------------------
 1 files changed, 26 insertions(+), 26 deletions(-)

--- linux-2617-rc4g6.orig/include/linux/list.h
+++ linux-2617-rc4g6/include/linux/list.h
@@ -328,7 +328,7 @@ static inline void list_splice_init(stru
 
 /**
  * list_for_each	-	iterate over a list
- * @pos:	the &struct list_head to use as a loop counter.
+ * @pos:	the &struct list_head to use as a loop control.
  * @head:	the head for your list.
  */
 #define list_for_each(pos, head) \
@@ -337,7 +337,7 @@ static inline void list_splice_init(stru
 
 /**
  * __list_for_each	-	iterate over a list
- * @pos:	the &struct list_head to use as a loop counter.
+ * @pos:	the &struct list_head to use as a loop control.
  * @head:	the head for your list.
  *
  * This variant differs from list_for_each() in that it's the
@@ -350,7 +350,7 @@ static inline void list_splice_init(stru
 
 /**
  * list_for_each_prev	-	iterate over a list backwards
- * @pos:	the &struct list_head to use as a loop counter.
+ * @pos:	the &struct list_head to use as a loop control.
  * @head:	the head for your list.
  */
 #define list_for_each_prev(pos, head) \
@@ -359,7 +359,7 @@ static inline void list_splice_init(stru
 
 /**
  * list_for_each_safe - iterate over a list safe against removal of list entry
- * @pos:	the &struct list_head to use as a loop counter.
+ * @pos:	the &struct list_head to use as a loop control.
  * @n:		another &struct list_head to use as temporary storage
  * @head:	the head for your list.
  */
@@ -369,7 +369,7 @@ static inline void list_splice_init(stru
 
 /**
  * list_for_each_entry	-	iterate over list of given type
- * @pos:	the type * to use as a loop counter.
+ * @pos:	the type * to use as a loop control.
  * @head:	the head for your list.
  * @member:	the name of the list_struct within the struct.
  */
@@ -380,7 +380,7 @@ static inline void list_splice_init(stru
 
 /**
  * list_for_each_entry_reverse - iterate backwards over list of given type.
- * @pos:	the type * to use as a loop counter.
+ * @pos:	the type * to use as a loop control.
  * @head:	the head for your list.
  * @member:	the name of the list_struct within the struct.
  */
@@ -402,7 +402,7 @@ static inline void list_splice_init(stru
 
 /**
  * list_for_each_entry_continue - continue iteration over list of given type
- * @pos:	the type * to use as a loop counter.
+ * @pos:	the type * to use as a loop control.
  * @head:	the head for your list.
  * @member:	the name of the list_struct within the struct.
  *
@@ -416,7 +416,7 @@ static inline void list_splice_init(stru
 
 /**
  * list_for_each_entry_from - iterate over list of given type from the current point
- * @pos:	the type * to use as a loop counter.
+ * @pos:	the type * to use as a loop control.
  * @head:	the head for your list.
  * @member:	the name of the list_struct within the struct.
  *
@@ -428,7 +428,7 @@ static inline void list_splice_init(stru
 
 /**
  * list_for_each_entry_safe - iterate over list of given type safe against removal of list entry
- * @pos:	the type * to use as a loop counter.
+ * @pos:	the type * to use as a loop control.
  * @n:		another type * to use as temporary storage
  * @head:	the head for your list.
  * @member:	the name of the list_struct within the struct.
@@ -441,7 +441,7 @@ static inline void list_splice_init(stru
 
 /**
  * list_for_each_entry_safe_continue
- * @pos:	the type * to use as a loop counter.
+ * @pos:	the type * to use as a loop control.
  * @n:		another type * to use as temporary storage
  * @head:	the head for your list.
  * @member:	the name of the list_struct within the struct.
@@ -457,7 +457,7 @@ static inline void list_splice_init(stru
 
 /**
  * list_for_each_entry_safe_from
- * @pos:	the type * to use as a loop counter.
+ * @pos:	the type * to use as a loop control.
  * @n:		another type * to use as temporary storage
  * @head:	the head for your list.
  * @member:	the name of the list_struct within the struct.
@@ -472,7 +472,7 @@ static inline void list_splice_init(stru
 
 /**
  * list_for_each_entry_safe_reverse
- * @pos:	the type * to use as a loop counter.
+ * @pos:	the type * to use as a loop control.
  * @n:		another type * to use as temporary storage
  * @head:	the head for your list.
  * @member:	the name of the list_struct within the struct.
@@ -488,7 +488,7 @@ static inline void list_splice_init(stru
 
 /**
  * list_for_each_rcu	-	iterate over an rcu-protected list
- * @pos:	the &struct list_head to use as a loop counter.
+ * @pos:	the &struct list_head to use as a loop control.
  * @head:	the head for your list.
  *
  * This list-traversal primitive may safely run concurrently with
@@ -507,7 +507,7 @@ static inline void list_splice_init(stru
 
 /**
  * list_for_each_safe_rcu
- * @pos:	the &struct list_head to use as a loop counter.
+ * @pos:	the &struct list_head to use as a loop control.
  * @n:		another &struct list_head to use as temporary storage
  * @head:	the head for your list.
  *
@@ -524,7 +524,7 @@ static inline void list_splice_init(stru
 
 /**
  * list_for_each_entry_rcu	-	iterate over rcu list of given type
- * @pos:	the type * to use as a loop counter.
+ * @pos:	the type * to use as a loop control.
  * @head:	the head for your list.
  * @member:	the name of the list_struct within the struct.
  *
@@ -541,7 +541,7 @@ static inline void list_splice_init(stru
 
 /**
  * list_for_each_continue_rcu
- * @pos:	the &struct list_head to use as a loop counter.
+ * @pos:	the &struct list_head to use as a loop control.
  * @head:	the head for your list.
  *
  * Iterate over an rcu-protected list, continuing after current point.
@@ -791,8 +791,8 @@ static inline void hlist_add_after_rcu(s
 
 /**
  * hlist_for_each_entry	- iterate over list of given type
- * @tpos:	the type * to use as a loop counter.
- * @pos:	the &struct hlist_node to use as a loop counter.
+ * @tpos:	the type * to use as a loop control.
+ * @pos:	the &struct hlist_node to use as a loop control.
  * @head:	the head for your list.
  * @member:	the name of the hlist_node within the struct.
  */
@@ -804,8 +804,8 @@ static inline void hlist_add_after_rcu(s
 
 /**
  * hlist_for_each_entry_continue - iterate over a hlist continuing after current point
- * @tpos:	the type * to use as a loop counter.
- * @pos:	the &struct hlist_node to use as a loop counter.
+ * @tpos:	the type * to use as a loop control.
+ * @pos:	the &struct hlist_node to use as a loop control.
  * @member:	the name of the hlist_node within the struct.
  */
 #define hlist_for_each_entry_continue(tpos, pos, member)		 \
@@ -816,8 +816,8 @@ static inline void hlist_add_after_rcu(s
 
 /**
  * hlist_for_each_entry_from - iterate over a hlist continuing from current point
- * @tpos:	the type * to use as a loop counter.
- * @pos:	the &struct hlist_node to use as a loop counter.
+ * @tpos:	the type * to use as a loop control.
+ * @pos:	the &struct hlist_node to use as a loop control.
  * @member:	the name of the hlist_node within the struct.
  */
 #define hlist_for_each_entry_from(tpos, pos, member)			 \
@@ -827,8 +827,8 @@ static inline void hlist_add_after_rcu(s
 
 /**
  * hlist_for_each_entry_safe - iterate over list of given type safe against removal of list entry
- * @tpos:	the type * to use as a loop counter.
- * @pos:	the &struct hlist_node to use as a loop counter.
+ * @tpos:	the type * to use as a loop control.
+ * @pos:	the &struct hlist_node to use as a loop control.
  * @n:		another &struct hlist_node to use as temporary storage
  * @head:	the head for your list.
  * @member:	the name of the hlist_node within the struct.
@@ -841,8 +841,8 @@ static inline void hlist_add_after_rcu(s
 
 /**
  * hlist_for_each_entry_rcu - iterate over rcu list of given type
- * @tpos:	the type * to use as a loop counter.
- * @pos:	the &struct hlist_node to use as a loop counter.
+ * @tpos:	the type * to use as a loop control.
+ * @pos:	the &struct hlist_node to use as a loop control.
  * @head:	the head for your list.
  * @member:	the name of the hlist_node within the struct.
  *


---

Re: [PATCH 2/2] list.h doc: change "counter" to "control"

[Randy.Dunlap]

On Fri, 19 May 2006 10:37:28 -0500 Scott Preece wrote:

> I agree that "counter" is wrong, but "control" is still a little
> vague. How about:
> "the &struct list_head that tracks iteration over the list" or
> "the &struct list_head that tracks current location in list."

I considered "iterator" (but that's the macro itself I think),
"control", "variable", "pointer", and "position".
"current location" would be OK with me.


> scott
> 
> On 5/18/06, Randy.Dunlap <rdunlap@xenotime.net> wrote:
> > From: Randy Dunlap <rdunlap@xenotime.net>
> >
> > Use loop "control" instead of loop "counter" for list iterator
> > descriptions.  They are not counters, they are controls or
> > pointers or positions.
> >
> > Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
> > ---
> >  include/linux/list.h |   52 +++++++++++++++++++++++++--------------------------
> >  1 files changed, 26 insertions(+), 26 deletions(-)
> >
> > --- linux-2617-rc4g6.orig/include/linux/list.h
> > +++ linux-2617-rc4g6/include/linux/list.h
> > @@ -328,7 +328,7 @@ static inline void list_splice_init(stru
> >
> >  /**
> >   * list_for_each       -       iterate over a list
> > - * @pos:       the &struct list_head to use as a loop counter.
> > + * @pos:       the &struct list_head to use as a loop control.
> >   * @head:      the head for your list.
> >   */
> >  #define list_for_each(pos, head) \
> > @@ -337,7 +337,7 @@ static inline void list_splice_init(stru
> >
> >  /**
> >   * __list_for_each     -       iterate over a list
> > - * @pos:       the &struct list_head to use as a loop counter.
> > + * @pos:       the &struct list_head to use as a loop control.
> >   * @head:      the head for your list.
> >   *
> >   * This variant differs from list_for_each() in that it's the
> > @@ -350,7 +350,7 @@ static inline void list_splice_init(stru
> >
> >  /**
> >   * list_for_each_prev  -       iterate over a list backwards
> > - * @pos:       the &struct list_head to use as a loop counter.
> > + * @pos:       the &struct list_head to use as a loop control.
> >   * @head:      the head for your list.
> >   */
> >  #define list_for_each_prev(pos, head) \
> > @@ -359,7 +359,7 @@ static inline void list_splice_init(stru
> >
> >  /**
> >   * list_for_each_safe - iterate over a list safe against removal of list entry
> > - * @pos:       the &struct list_head to use as a loop counter.
> > + * @pos:       the &struct list_head to use as a loop control.
> >   * @n:         another &struct list_head to use as temporary storage
> >   * @head:      the head for your list.
> >   */
> > @@ -369,7 +369,7 @@ static inline void list_splice_init(stru
> >
> >  /**
> >   * list_for_each_entry -       iterate over list of given type
> > - * @pos:       the type * to use as a loop counter.
> > + * @pos:       the type * to use as a loop control.
> >   * @head:      the head for your list.
> >   * @member:    the name of the list_struct within the struct.
> >   */
> > @@ -380,7 +380,7 @@ static inline void list_splice_init(stru
> >
> >  /**
> >   * list_for_each_entry_reverse - iterate backwards over list of given type.
> > - * @pos:       the type * to use as a loop counter.
> > + * @pos:       the type * to use as a loop control.
> >   * @head:      the head for your list.
> >   * @member:    the name of the list_struct within the struct.
> >   */
> > @@ -402,7 +402,7 @@ static inline void list_splice_init(stru
> >
> >  /**
> >   * list_for_each_entry_continue - continue iteration over list of given type
> > - * @pos:       the type * to use as a loop counter.
> > + * @pos:       the type * to use as a loop control.
> >   * @head:      the head for your list.
> >   * @member:    the name of the list_struct within the struct.
> >   *
> > @@ -416,7 +416,7 @@ static inline void list_splice_init(stru
> >
> >  /**
> >   * list_for_each_entry_from - iterate over list of given type from the current point
> > - * @pos:       the type * to use as a loop counter.
> > + * @pos:       the type * to use as a loop control.
> >   * @head:      the head for your list.
> >   * @member:    the name of the list_struct within the struct.
> >   *
> > @@ -428,7 +428,7 @@ static inline void list_splice_init(stru
> >
> >  /**
> >   * list_for_each_entry_safe - iterate over list of given type safe against removal of list entry
> > - * @pos:       the type * to use as a loop counter.
> > + * @pos:       the type * to use as a loop control.
> >   * @n:         another type * to use as temporary storage
> >   * @head:      the head for your list.
> >   * @member:    the name of the list_struct within the struct.
> > @@ -441,7 +441,7 @@ static inline void list_splice_init(stru
> >
> >  /**
> >   * list_for_each_entry_safe_continue
> > - * @pos:       the type * to use as a loop counter.
> > + * @pos:       the type * to use as a loop control.
> >   * @n:         another type * to use as temporary storage
> >   * @head:      the head for your list.
> >   * @member:    the name of the list_struct within the struct.
> > @@ -457,7 +457,7 @@ static inline void list_splice_init(stru
> >
> >  /**
> >   * list_for_each_entry_safe_from
> > - * @pos:       the type * to use as a loop counter.
> > + * @pos:       the type * to use as a loop control.
> >   * @n:         another type * to use as temporary storage
> >   * @head:      the head for your list.
> >   * @member:    the name of the list_struct within the struct.
> > @@ -472,7 +472,7 @@ static inline void list_splice_init(stru
> >
> >  /**
> >   * list_for_each_entry_safe_reverse
> > - * @pos:       the type * to use as a loop counter.
> > + * @pos:       the type * to use as a loop control.
> >   * @n:         another type * to use as temporary storage
> >   * @head:      the head for your list.
> >   * @member:    the name of the list_struct within the struct.
> > @@ -488,7 +488,7 @@ static inline void list_splice_init(stru
> >
> >  /**
> >   * list_for_each_rcu   -       iterate over an rcu-protected list
> > - * @pos:       the &struct list_head to use as a loop counter.
> > + * @pos:       the &struct list_head to use as a loop control.
> >   * @head:      the head for your list.
> >   *
> >   * This list-traversal primitive may safely run concurrently with
> > @@ -507,7 +507,7 @@ static inline void list_splice_init(stru
> >
> >  /**
> >   * list_for_each_safe_rcu
> > - * @pos:       the &struct list_head to use as a loop counter.
> > + * @pos:       the &struct list_head to use as a loop control.
> >   * @n:         another &struct list_head to use as temporary storage
> >   * @head:      the head for your list.
> >   *
> > @@ -524,7 +524,7 @@ static inline void list_splice_init(stru
> >
> >  /**
> >   * list_for_each_entry_rcu     -       iterate over rcu list of given type
> > - * @pos:       the type * to use as a loop counter.
> > + * @pos:       the type * to use as a loop control.
> >   * @head:      the head for your list.
> >   * @member:    the name of the list_struct within the struct.
> >   *
> > @@ -541,7 +541,7 @@ static inline void list_splice_init(stru
> >
> >  /**
> >   * list_for_each_continue_rcu
> > - * @pos:       the &struct list_head to use as a loop counter.
> > + * @pos:       the &struct list_head to use as a loop control.
> >   * @head:      the head for your list.
> >   *
> >   * Iterate over an rcu-protected list, continuing after current point.
> > @@ -791,8 +791,8 @@ static inline void hlist_add_after_rcu(s
> >
> >  /**
> >   * hlist_for_each_entry        - iterate over list of given type
> > - * @tpos:      the type * to use as a loop counter.
> > - * @pos:       the &struct hlist_node to use as a loop counter.
> > + * @tpos:      the type * to use as a loop control.
> > + * @pos:       the &struct hlist_node to use as a loop control.
> >   * @head:      the head for your list.
> >   * @member:    the name of the hlist_node within the struct.
> >   */
> > @@ -804,8 +804,8 @@ static inline void hlist_add_after_rcu(s
> >
> >  /**
> >   * hlist_for_each_entry_continue - iterate over a hlist continuing after current point
> > - * @tpos:      the type * to use as a loop counter.
> > - * @pos:       the &struct hlist_node to use as a loop counter.
> > + * @tpos:      the type * to use as a loop control.
> > + * @pos:       the &struct hlist_node to use as a loop control.
> >   * @member:    the name of the hlist_node within the struct.
> >   */
> >  #define hlist_for_each_entry_continue(tpos, pos, member)                \
> > @@ -816,8 +816,8 @@ static inline void hlist_add_after_rcu(s
> >
> >  /**
> >   * hlist_for_each_entry_from - iterate over a hlist continuing from current point
> > - * @tpos:      the type * to use as a loop counter.
> > - * @pos:       the &struct hlist_node to use as a loop counter.
> > + * @tpos:      the type * to use as a loop control.
> > + * @pos:       the &struct hlist_node to use as a loop control.
> >   * @member:    the name of the hlist_node within the struct.
> >   */
> >  #define hlist_for_each_entry_from(tpos, pos, member)                    \
> > @@ -827,8 +827,8 @@ static inline void hlist_add_after_rcu(s
> >
> >  /**
> >   * hlist_for_each_entry_safe - iterate over list of given type safe against removal of list entry
> > - * @tpos:      the type * to use as a loop counter.
> > - * @pos:       the &struct hlist_node to use as a loop counter.
> > + * @tpos:      the type * to use as a loop control.
> > + * @pos:       the &struct hlist_node to use as a loop control.
> >   * @n:         another &struct hlist_node to use as temporary storage
> >   * @head:      the head for your list.
> >   * @member:    the name of the hlist_node within the struct.
> > @@ -841,8 +841,8 @@ static inline void hlist_add_after_rcu(s
> >
> >  /**
> >   * hlist_for_each_entry_rcu - iterate over rcu list of given type
> > - * @tpos:      the type * to use as a loop counter.
> > - * @pos:       the &struct hlist_node to use as a loop counter.
> > + * @tpos:      the type * to use as a loop control.
> > + * @pos:       the &struct hlist_node to use as a loop control.
> >   * @head:      the head for your list.
> >   * @member:    the name of the hlist_node within the struct.
> >   *
> >
> >
> > ---
> > -
> > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> > the body of a message to majordomo@vger.kernel.org
> > More majordomo info at  http://vger.kernel.org/majordomo-info.html
> > Please read the FAQ at  http://www.tux.org/lkml/
> >
> 


---
~Randy

Re: [PATCH 2/2] list.h doc: change "counter" to "control"

[Andrew Morton]

"Randy.Dunlap" <rdunlap@xenotime.net> wrote:
>
> On Fri, 19 May 2006 10:37:28 -0500 Scott Preece wrote:
> 
>  > I agree that "counter" is wrong, but "control" is still a little
>  > vague. How about:
>  > "the &struct list_head that tracks iteration over the list" or
>  > "the &struct list_head that tracks current location in list."
> 
>  I considered "iterator" (but that's the macro itself I think),
>  "control", "variable", "pointer", and "position".
>  "current location" would be OK with me.

"cursor"

Re: [PATCH 2/2] list.h doc: change "counter" to "control"

[Randy.Dunlap]

On Fri, 19 May 2006 12:10:12 -0500 Scott Preece wrote:

> "cursor" is what I usually use in my own code...
> 
> On 5/19/06, Andrew Morton <akpm@osdl.org> wrote:
> >
> > "cursor"

OK, here's a patch to replace the other one.


From: Randy Dunlap <rdunlap@xenotime.net>

Use loop "cursor" instead of loop "counter" for list iterator
descriptions.  They are not counters, they are cursors or
pointers or positions or locations.

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
---
 include/linux/list.h |   52 +++++++++++++++++++++++++--------------------------
 1 files changed, 26 insertions(+), 26 deletions(-)

--- linux-2617-rc4g6.orig/include/linux/list.h
+++ linux-2617-rc4g6/include/linux/list.h
@@ -328,7 +328,7 @@ static inline void list_splice_init(stru
 
 /**
  * list_for_each	-	iterate over a list
- * @pos:	the &struct list_head to use as a loop counter.
+ * @pos:	the &struct list_head to use as a loop cursor.
  * @head:	the head for your list.
  */
 #define list_for_each(pos, head) \
@@ -337,7 +337,7 @@ static inline void list_splice_init(stru
 
 /**
  * __list_for_each	-	iterate over a list
- * @pos:	the &struct list_head to use as a loop counter.
+ * @pos:	the &struct list_head to use as a loop cursor.
  * @head:	the head for your list.
  *
  * This variant differs from list_for_each() in that it's the
@@ -350,7 +350,7 @@ static inline void list_splice_init(stru
 
 /**
  * list_for_each_prev	-	iterate over a list backwards
- * @pos:	the &struct list_head to use as a loop counter.
+ * @pos:	the &struct list_head to use as a loop cursor.
  * @head:	the head for your list.
  */
 #define list_for_each_prev(pos, head) \
@@ -359,7 +359,7 @@ static inline void list_splice_init(stru
 
 /**
  * list_for_each_safe - iterate over a list safe against removal of list entry
- * @pos:	the &struct list_head to use as a loop counter.
+ * @pos:	the &struct list_head to use as a loop cursor.
  * @n:		another &struct list_head to use as temporary storage
  * @head:	the head for your list.
  */
@@ -369,7 +369,7 @@ static inline void list_splice_init(stru
 
 /**
  * list_for_each_entry	-	iterate over list of given type
- * @pos:	the type * to use as a loop counter.
+ * @pos:	the type * to use as a loop cursor.
  * @head:	the head for your list.
  * @member:	the name of the list_struct within the struct.
  */
@@ -380,7 +380,7 @@ static inline void list_splice_init(stru
 
 /**
  * list_for_each_entry_reverse - iterate backwards over list of given type.
- * @pos:	the type * to use as a loop counter.
+ * @pos:	the type * to use as a loop cursor.
  * @head:	the head for your list.
  * @member:	the name of the list_struct within the struct.
  */
@@ -402,7 +402,7 @@ static inline void list_splice_init(stru
 
 /**
  * list_for_each_entry_continue - continue iteration over list of given type
- * @pos:	the type * to use as a loop counter.
+ * @pos:	the type * to use as a loop cursor.
  * @head:	the head for your list.
  * @member:	the name of the list_struct within the struct.
  *
@@ -416,7 +416,7 @@ static inline void list_splice_init(stru
 
 /**
  * list_for_each_entry_from - iterate over list of given type from the current point
- * @pos:	the type * to use as a loop counter.
+ * @pos:	the type * to use as a loop cursor.
  * @head:	the head for your list.
  * @member:	the name of the list_struct within the struct.
  *
@@ -428,7 +428,7 @@ static inline void list_splice_init(stru
 
 /**
  * list_for_each_entry_safe - iterate over list of given type safe against removal of list entry
- * @pos:	the type * to use as a loop counter.
+ * @pos:	the type * to use as a loop cursor.
  * @n:		another type * to use as temporary storage
  * @head:	the head for your list.
  * @member:	the name of the list_struct within the struct.
@@ -441,7 +441,7 @@ static inline void list_splice_init(stru
 
 /**
  * list_for_each_entry_safe_continue
- * @pos:	the type * to use as a loop counter.
+ * @pos:	the type * to use as a loop cursor.
  * @n:		another type * to use as temporary storage
  * @head:	the head for your list.
  * @member:	the name of the list_struct within the struct.
@@ -457,7 +457,7 @@ static inline void list_splice_init(stru
 
 /**
  * list_for_each_entry_safe_from
- * @pos:	the type * to use as a loop counter.
+ * @pos:	the type * to use as a loop cursor.
  * @n:		another type * to use as temporary storage
  * @head:	the head for your list.
  * @member:	the name of the list_struct within the struct.
@@ -472,7 +472,7 @@ static inline void list_splice_init(stru
 
 /**
  * list_for_each_entry_safe_reverse
- * @pos:	the type * to use as a loop counter.
+ * @pos:	the type * to use as a loop cursor.
  * @n:		another type * to use as temporary storage
  * @head:	the head for your list.
  * @member:	the name of the list_struct within the struct.
@@ -488,7 +488,7 @@ static inline void list_splice_init(stru
 
 /**
  * list_for_each_rcu	-	iterate over an rcu-protected list
- * @pos:	the &struct list_head to use as a loop counter.
+ * @pos:	the &struct list_head to use as a loop cursor.
  * @head:	the head for your list.
  *
  * This list-traversal primitive may safely run concurrently with
@@ -507,7 +507,7 @@ static inline void list_splice_init(stru
 
 /**
  * list_for_each_safe_rcu
- * @pos:	the &struct list_head to use as a loop counter.
+ * @pos:	the &struct list_head to use as a loop cursor.
  * @n:		another &struct list_head to use as temporary storage
  * @head:	the head for your list.
  *
@@ -524,7 +524,7 @@ static inline void list_splice_init(stru
 
 /**
  * list_for_each_entry_rcu	-	iterate over rcu list of given type
- * @pos:	the type * to use as a loop counter.
+ * @pos:	the type * to use as a loop cursor.
  * @head:	the head for your list.
  * @member:	the name of the list_struct within the struct.
  *
@@ -541,7 +541,7 @@ static inline void list_splice_init(stru
 
 /**
  * list_for_each_continue_rcu
- * @pos:	the &struct list_head to use as a loop counter.
+ * @pos:	the &struct list_head to use as a loop cursor.
  * @head:	the head for your list.
  *
  * Iterate over an rcu-protected list, continuing after current point.
@@ -791,8 +791,8 @@ static inline void hlist_add_after_rcu(s
 
 /**
  * hlist_for_each_entry	- iterate over list of given type
- * @tpos:	the type * to use as a loop counter.
- * @pos:	the &struct hlist_node to use as a loop counter.
+ * @tpos:	the type * to use as a loop cursor.
+ * @pos:	the &struct hlist_node to use as a loop cursor.
  * @head:	the head for your list.
  * @member:	the name of the hlist_node within the struct.
  */
@@ -804,8 +804,8 @@ static inline void hlist_add_after_rcu(s
 
 /**
  * hlist_for_each_entry_continue - iterate over a hlist continuing after current point
- * @tpos:	the type * to use as a loop counter.
- * @pos:	the &struct hlist_node to use as a loop counter.
+ * @tpos:	the type * to use as a loop cursor.
+ * @pos:	the &struct hlist_node to use as a loop cursor.
  * @member:	the name of the hlist_node within the struct.
  */
 #define hlist_for_each_entry_continue(tpos, pos, member)		 \
@@ -816,8 +816,8 @@ static inline void hlist_add_after_rcu(s
 
 /**
  * hlist_for_each_entry_from - iterate over a hlist continuing from current point
- * @tpos:	the type * to use as a loop counter.
- * @pos:	the &struct hlist_node to use as a loop counter.
+ * @tpos:	the type * to use as a loop cursor.
+ * @pos:	the &struct hlist_node to use as a loop cursor.
  * @member:	the name of the hlist_node within the struct.
  */
 #define hlist_for_each_entry_from(tpos, pos, member)			 \
@@ -827,8 +827,8 @@ static inline void hlist_add_after_rcu(s
 
 /**
  * hlist_for_each_entry_safe - iterate over list of given type safe against removal of list entry
- * @tpos:	the type * to use as a loop counter.
- * @pos:	the &struct hlist_node to use as a loop counter.
+ * @tpos:	the type * to use as a loop cursor.
+ * @pos:	the &struct hlist_node to use as a loop cursor.
  * @n:		another &struct hlist_node to use as temporary storage
  * @head:	the head for your list.
  * @member:	the name of the hlist_node within the struct.
@@ -841,8 +841,8 @@ static inline void hlist_add_after_rcu(s
 
 /**
  * hlist_for_each_entry_rcu - iterate over rcu list of given type
- * @tpos:	the type * to use as a loop counter.
- * @pos:	the &struct hlist_node to use as a loop counter.
+ * @tpos:	the type * to use as a loop cursor.
+ * @pos:	the &struct hlist_node to use as a loop cursor.
  * @head:	the head for your list.
  * @member:	the name of the hlist_node within the struct.
  *