From: Andrew Moise <chops@demiurgestudios.com>
To: linux-kernel@vger.kernel.org
Subject: DMA errors, then I/O errors, on 2.6.16
Date: Sat, 27 May 2006 17:07:15 -0400 [thread overview]
Message-ID: <20060527210715.GA2866@qix.demiurgestudios.com> (raw)
Running 2.6.16 (and some earlier 2.6 kernels as well), I get
occasional DMA failures, which are always followed by the disk not
working at all (any request leads to an I/O error). The log and whatnot
follows. Can anyone tell me what the source of this trouble might be
(disk, controller, cable, software)?
Please CC replies to me, as I'm not on the list. Thanks.
--- Log:
May 27 16:34:44 vino kernel: hda: dma_intr: status=0x7f { DriveReady DeviceFault
SeekComplete DataRequest CorrectedError Index Error }
May 27 16:34:44 vino kernel: hda: dma_intr: error=0x7f { DriveStatusError UncorrectableError SectorIdNotFound TrackZeroNotFound AddrMarkNotFound }, LBAsect=1495
68083689343, high=8914952, low=8355711, sector=356876123
May 27 16:34:44 vino kernel: ide: failed opcode was: unknown
May 27 16:34:44 vino kernel: hda: DMA disabled
May 27 16:34:44 vino kernel: ide0: reset: master: error (0x0a?)
May 27 16:34:44 vino kernel: hda: task_in_intr: status=0x7f { DriveReady DeviceFault SeekComplete DataRequest CorrectedError Index Error }
May 27 16:34:44 vino kernel: hda: task_in_intr: error=0x7f { DriveStatusError UncorrectableError SectorIdNotFound TrackZeroNotFound AddrMarkNotFound }, LBAsect=
149568083689343, high=8914952, low=8355711, sector=356876123
May 27 16:34:44 vino kernel: ide: failed opcode was: unknown
May 27 16:34:44 vino kernel: ide0: reset: master: error (0x0a?)
May 27 16:34:44 vino kernel: end_request: I/O error, dev hda, sector 356876123
May 27 16:34:44 vino kernel: end_request: I/O error, dev hda, sector 356876131
... and so on, for many more I/O errors.
--- Version:
Linux version 2.6.16-1-486 (Debian 2.6.16-12) (waldi@debian.org) (gcc version 4.0.4 20060422 (prerelease) (Debian 4.0.3-2)) #2 Thu May 4 18:15:54 UTC 2006
--- Disk controller:
0000:00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
Subsystem: VIA Technologies, Inc.: Unknown device aa01
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin A routed to IRQ 11
Region 4: I/O ports at e000 [size=16]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
next reply other threads:[~2006-05-27 21:07 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-05-27 21:07 Andrew Moise [this message]
2006-05-27 21:18 ` Haar János
2006-05-27 21:54 ` Andrew Moise
2006-05-27 21:20 ` Valdis.Kletnieks
2006-05-28 8:33 ` Arjan van de Ven
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20060527210715.GA2866@qix.demiurgestudios.com \
--to=chops@demiurgestudios.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®