* Unable to load kernel to intel ixp
@ 2006-06-21 17:09 Dennis Jacob
2006-06-21 17:26 ` Erik Mouw
0 siblings, 1 reply; 2+ messages in thread
From: Dennis Jacob @ 2006-06-21 17:09 UTC (permalink / raw)
To: linux-kernel
Hello There,
I am trying to load Montavista linux to intel
ixp425. The board comes with redboot on it.
The redboot itself shows the following error before
its prompt comes up.
[error] ixEthMiiPhyScan : unexpected Mii PHY ID
03026071
Anyway, I am able to load zImage and ramdisk to
0x01600000 and 0x00800000 respectively. But when I
give "go 0x01600000", kernel starts
"Uncompressing....". But, in the middle one message
comes like "Unable to handle kernel paging request at
virtual address 40afb000 mm = c01e1380 pgd =
c0004000".
Has anyone encountered the same problem?
Please help me.
Thanks
Dennis
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: Unable to load kernel to intel ixp
2006-06-21 17:09 Unable to load kernel to intel ixp Dennis Jacob
@ 2006-06-21 17:26 ` Erik Mouw
0 siblings, 0 replies; 2+ messages in thread
From: Erik Mouw @ 2006-06-21 17:26 UTC (permalink / raw)
To: Dennis Jacob; +Cc: linux-kernel
On Wed, Jun 21, 2006 at 10:09:36AM -0700, Dennis Jacob wrote:
> I am trying to load Montavista linux to intel
> ixp425. The board comes with redboot on it.
If you got your kernel from Montavista, why don't you ask Montavista
for support?
Erik
--
+-- Erik Mouw -- www.harddisk-recovery.com -- +31 70 370 12 90 --
| Lab address: Delftechpark 26, 2628 XH, Delft, The Netherlands
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2006-06-21 17:26 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2006-06-21 17:09 Unable to load kernel to intel ixp Dennis Jacob
2006-06-21 17:26 ` Erik Mouw
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®