From: Chris Wright <chrisw@sous-sol.org>
To: James Morris <jmorris@namei.org>
Cc: Andrew Morton <akpm@osdl.org>,
linux-kernel@vger.kernel.org, Stephen Smalley <sds@tycho.nsa.gov>,
Chris Wright <chrisw@sous-sol.org>,
David Quigley <dpquigl@tycho.nsa.gov>
Subject: Re: [PATCH 1/3] SELinux: Extend task_kill hook to handle signals sent by AIO completion
Date: Wed, 28 Jun 2006 17:16:28 -0700 [thread overview]
Message-ID: <20060629001628.GQ11588@sequoia.sous-sol.org> (raw)
In-Reply-To: <Pine.LNX.4.64.0606281943240.17149@d.namei>
* James Morris (jmorris@namei.org) wrote:
> From: David Quigley <dpquigl@tycho.nsa.gov>
>
> This patch extends the security_task_kill hook to handle signals sent by
> AIO completion. In this case, the secid of the task responsible for the
> signal needs to be obtained and saved earlier, so a
> security_task_getsecid() hook is added, and then this saved value is
> passed subsequently to the extended task_kill hook for use in checking.
>
> Signed-Off-By: David Quigley <dpquigl@tycho.nsa.gov>
> Signed-off-by: James Morris <jmorris@namei.org>
>
>
> Please apply.
>
> ---
>
> include/linux/security.h | 23 +++++++++++++++++++----
> security/dummy.c | 6 +++++-
> security/selinux/hooks.c | 21 +++++++++++++++++----
> 3 files changed, 41 insertions(+), 9 deletions(-)
>
> diff -uprN -X /home/dpquigl/dontdiff linux-2.6.17-mm3/include/linux/security.h linux-2.6.17-mm3-kill/include/linux/security.h
> --- linux-2.6.17-mm3/include/linux/security.h 2006-06-28 13:58:59.000000000 -0400
> +++ linux-2.6.17-mm3-kill/include/linux/security.h 2006-06-28 15:24:54.000000000 -0400
> @@ -567,6 +567,9 @@ struct swap_info_struct;
> * @p.
> * @p contains the task_struct for the process.
> * Return 0 if permission is granted.
> + * @task_getsecid:
> + * Retrieve the security identifier of the process @p.
> + * @p contains the task_struct for the process and place is into @secid.
> * @task_setgroups:
> * Check permission before setting the supplementary group set of the
> * current process.
> @@ -615,6 +618,7 @@ struct swap_info_struct;
> * @p contains the task_struct for process.
> * @info contains the signal information.
> * @sig contains the signal value.
> + * @secid contains the sid of the process where the signal originated
> * Return 0 if permission is granted.
> * @task_wait:
> * Check permission before allowing a process to reap a child process @p
> @@ -1218,6 +1222,7 @@ struct security_operations {
> int (*task_setpgid) (struct task_struct * p, pid_t pgid);
> int (*task_getpgid) (struct task_struct * p);
> int (*task_getsid) (struct task_struct * p);
> + void (*task_getsecid) (struct task_struct * p, u32 * secid);
Why not just:
u32 (*task_getsecid) (struct task_struct *p);
> int (*task_setgroups) (struct group_info *group_info);
> int (*task_setnice) (struct task_struct * p, int nice);
> int (*task_setioprio) (struct task_struct * p, int ioprio);
> @@ -1227,7 +1232,7 @@ struct security_operations {
> int (*task_getscheduler) (struct task_struct * p);
> int (*task_movememory) (struct task_struct * p);
> int (*task_kill) (struct task_struct * p,
> - struct siginfo * info, int sig);
> + struct siginfo * info, int sig, u32 secid);
This breaks the build, which breaks bisection. Be nice to avoid that
since there's no reason the patches couldn't split that way.
> diff -uprN -X /home/dpquigl/dontdiff linux-2.6.17-mm3/security/selinux/hooks.c linux-2.6.17-mm3-kill/security/selinux/hooks.c
> --- linux-2.6.17-mm3/security/selinux/hooks.c 2006-06-28 13:58:59.000000000 -0400
> +++ linux-2.6.17-mm3-kill/security/selinux/hooks.c 2006-06-28 14:40:00.000000000 -0400
> @@ -45,6 +45,7 @@
> #include <linux/kd.h>
> #include <linux/netfilter_ipv4.h>
> #include <linux/netfilter_ipv6.h>
> +#include <linux/selinux.h>
It's already included.
thanks,
next prev parent reply other threads:[~2006-06-29 0:16 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-06-28 23:45 James Morris
2006-06-28 23:46 ` [PATCH 2/3] SELinux: Add security hook call to kill_proc_info_as_uid James Morris
2006-06-28 23:49 ` [PATCH 3/3] SELinux: Update USB code with new kill_proc_info_as_uid James Morris
2006-06-29 23:57 ` Greg KH
2006-06-29 0:16 ` Chris Wright [this message]
2006-06-29 0:37 ` [PATCH 1/3] SELinux: Extend task_kill hook to handle signals sent by AIO completion James Morris
2006-06-29 0:52 ` Chris Wright
2006-06-29 0:55 ` Andrew Morton
2006-06-29 1:45 ` James Morris
2006-06-29 15:31 ` Stephen Smalley
2006-06-29 15:43 ` James Morris
2006-06-29 15:54 ` Stephen Smalley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20060629001628.GQ11588@sequoia.sous-sol.org \
--to=chrisw@sous-sol.org \
--cc=akpm@osdl.org \
--cc=dpquigl@tycho.nsa.gov \
--cc=jmorris@namei.org \
--cc=linux-kernel@vger.kernel.org \
--cc=sds@tycho.nsa.gov \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®