* [PATCH 2/3] usbnet: add a mutex around phy register access [not found] <200609170055.34565.arnd@arndb.de> @ 2006-09-16 23:03 ` Arnd Bergmann 2006-09-27 19:33 ` dhollis [not found] ` <200609170057.07460.arnd@arndb.de> 1 sibling, 1 reply; 4+ messages in thread From: Arnd Bergmann @ 2006-09-16 23:03 UTC (permalink / raw) To: David Brownell Cc: linux-usb-devel, David Hollis, support, dbrownell, linux-kernel, Michael Helmling When working on the mcs7830, I noticed the need for a mutex in its mdio_read/mdio_write functions. A related problem seems to be present in the asix driver in the respective functions. This introduces a mutex in the common usbnet driver and uses it from the two hardware specific drivers. Signed-off-by: Arnd Bergmann <arnd@arndb.de> --- Index: linux-cg/drivers/usb/net/asix.c =================================================================== --- linux-cg.orig/drivers/usb/net/asix.c 2006-09-17 00:10:53.000000000 +0200 +++ linux-cg/drivers/usb/net/asix.c 2006-09-17 00:18:08.000000000 +0200 @@ -328,10 +328,12 @@ struct usbnet *dev = netdev_priv(netdev); u16 res; + mutex_lock(&dev->phy_mutex); asix_set_sw_mii(dev); asix_read_cmd(dev, AX_CMD_READ_MII_REG, phy_id, (__u16)loc, 2, (u16 *)&res); asix_set_hw_mii(dev); + mutex_unlock(&dev->phy_mutex); return res & 0xffff; } @@ -348,10 +350,12 @@ struct usbnet *dev = netdev_priv(netdev); u16 res = val; + mutex_lock(&dev->phy_mutex); asix_set_sw_mii(dev); asix_write_cmd(dev, AX_CMD_WRITE_MII_REG, phy_id, (__u16)loc, 2, (u16 *)&res); asix_set_hw_mii(dev); + mutex_unlock(&dev->phy_mutex); } /* same as above, but converts new value to le16 byte order before writing */ Index: linux-cg/drivers/usb/net/usbnet.c =================================================================== --- linux-cg.orig/drivers/usb/net/usbnet.c 2006-09-17 00:10:53.000000000 +0200 +++ linux-cg/drivers/usb/net/usbnet.c 2006-09-17 00:18:08.000000000 +0200 @@ -1112,6 +1112,7 @@ dev->delay.function = usbnet_bh; dev->delay.data = (unsigned long) dev; init_timer (&dev->delay); + mutex_init (&dev->phy_mutex); SET_MODULE_OWNER (net); dev->net = net; Index: linux-cg/drivers/usb/net/usbnet.h =================================================================== --- linux-cg.orig/drivers/usb/net/usbnet.h 2006-09-17 00:10:53.000000000 +0200 +++ linux-cg/drivers/usb/net/usbnet.h 2006-09-17 00:18:08.000000000 +0200 @@ -30,6 +30,7 @@ struct usb_device *udev; struct driver_info *driver_info; wait_queue_head_t *wait; + struct mutex phy_mutex; /* i/o info: pipes etc */ unsigned in, out; Index: linux-cg/drivers/usb/net/mcs7830.c =================================================================== --- linux-cg.orig/drivers/usb/net/mcs7830.c 2006-09-17 00:10:53.000000000 +0200 +++ linux-cg/drivers/usb/net/mcs7830.c 2006-09-17 00:18:08.000000000 +0200 @@ -184,6 +184,7 @@ HIF_REG_PHY_CMD2_PEND_FLAG_BIT | index, }; + mutex_lock(&dev->phy_mutex); /* write the MII command */ ret = mcs7830_set_reg(dev, HIF_REG_PHY_CMD1, 2, cmd); if (ret < 0) @@ -208,6 +209,7 @@ dev_dbg(&dev->udev->dev, "read PHY reg %02x: %04x (%d tries)\n", index, val, i); out: + mutex_unlock(&dev->phy_mutex); return ret; } @@ -222,6 +224,8 @@ HIF_REG_PHY_CMD2_PEND_FLAG_BIT | (index & 0x1F), }; + mutex_lock(&dev->phy_mutex); + /* write the new register contents */ le_val = cpu_to_le16(val); ret = mcs7830_set_reg(dev, HIF_REG_PHY_DATA, 2, &le_val); @@ -248,6 +252,7 @@ dev_dbg(&dev->udev->dev, "write PHY reg %02x: %04x (%d tries)\n", index, val, i); out: + mutex_unlock(&dev->phy_mutex); return ret; } ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH 2/3] usbnet: add a mutex around phy register access 2006-09-16 23:03 ` [PATCH 2/3] usbnet: add a mutex around phy register access Arnd Bergmann @ 2006-09-27 19:33 ` dhollis 0 siblings, 0 replies; 4+ messages in thread From: dhollis @ 2006-09-27 19:33 UTC (permalink / raw) To: Arnd Bergmann Cc: David Brownell, linux-usb-devel, support, dbrownell, linux-kernel, Michael Helmling Quoting Arnd Bergmann <arnd@arndb.de>: > When working on the mcs7830, I noticed the need for a mutex in its > mdio_read/mdio_write functions. A related problem seems to be present > in the asix driver in the respective functions. > > This introduces a mutex in the common usbnet driver and uses it > from the two hardware specific drivers. > > Signed-off-by: Arnd Bergmann <arnd@arndb.de> > Acked-by: David Hollis <dhollis@davehollis.com> > --- > Index: linux-cg/drivers/usb/net/asix.c > =================================================================== > --- linux-cg.orig/drivers/usb/net/asix.c 2006-09-17 00:10:53.000000000 +0200 > +++ linux-cg/drivers/usb/net/asix.c 2006-09-17 00:18:08.000000000 +0200 > @@ -328,10 +328,12 @@ > struct usbnet *dev = netdev_priv(netdev); > u16 res; > > + mutex_lock(&dev->phy_mutex); > asix_set_sw_mii(dev); > asix_read_cmd(dev, AX_CMD_READ_MII_REG, phy_id, > (__u16)loc, 2, (u16 *)&res); > asix_set_hw_mii(dev); > + mutex_unlock(&dev->phy_mutex); > > return res & 0xffff; > } > @@ -348,10 +350,12 @@ > struct usbnet *dev = netdev_priv(netdev); > u16 res = val; > > + mutex_lock(&dev->phy_mutex); > asix_set_sw_mii(dev); > asix_write_cmd(dev, AX_CMD_WRITE_MII_REG, phy_id, > (__u16)loc, 2, (u16 *)&res); > asix_set_hw_mii(dev); > + mutex_unlock(&dev->phy_mutex); > } > > /* same as above, but converts new value to le16 byte order before > writing */ > Index: linux-cg/drivers/usb/net/usbnet.c > =================================================================== > --- linux-cg.orig/drivers/usb/net/usbnet.c 2006-09-17 > 00:10:53.000000000 +0200 > +++ linux-cg/drivers/usb/net/usbnet.c 2006-09-17 00:18:08.000000000 +0200 > @@ -1112,6 +1112,7 @@ > dev->delay.function = usbnet_bh; > dev->delay.data = (unsigned long) dev; > init_timer (&dev->delay); > + mutex_init (&dev->phy_mutex); > > SET_MODULE_OWNER (net); > dev->net = net; > Index: linux-cg/drivers/usb/net/usbnet.h > =================================================================== > --- linux-cg.orig/drivers/usb/net/usbnet.h 2006-09-17 > 00:10:53.000000000 +0200 > +++ linux-cg/drivers/usb/net/usbnet.h 2006-09-17 00:18:08.000000000 +0200 > @@ -30,6 +30,7 @@ > struct usb_device *udev; > struct driver_info *driver_info; > wait_queue_head_t *wait; > + struct mutex phy_mutex; > > /* i/o info: pipes etc */ > unsigned in, out; > Index: linux-cg/drivers/usb/net/mcs7830.c > =================================================================== > --- linux-cg.orig/drivers/usb/net/mcs7830.c 2006-09-17 > 00:10:53.000000000 +0200 > +++ linux-cg/drivers/usb/net/mcs7830.c 2006-09-17 00:18:08.000000000 +0200 > @@ -184,6 +184,7 @@ > HIF_REG_PHY_CMD2_PEND_FLAG_BIT | index, > }; > > + mutex_lock(&dev->phy_mutex); > /* write the MII command */ > ret = mcs7830_set_reg(dev, HIF_REG_PHY_CMD1, 2, cmd); > if (ret < 0) > @@ -208,6 +209,7 @@ > dev_dbg(&dev->udev->dev, "read PHY reg %02x: %04x (%d tries)\n", > index, val, i); > out: > + mutex_unlock(&dev->phy_mutex); > return ret; > } > > @@ -222,6 +224,8 @@ > HIF_REG_PHY_CMD2_PEND_FLAG_BIT | (index & 0x1F), > }; > > + mutex_lock(&dev->phy_mutex); > + > /* write the new register contents */ > le_val = cpu_to_le16(val); > ret = mcs7830_set_reg(dev, HIF_REG_PHY_DATA, 2, &le_val); > @@ -248,6 +252,7 @@ > dev_dbg(&dev->udev->dev, "write PHY reg %02x: %04x (%d tries)\n", > index, val, i); > out: > + mutex_unlock(&dev->phy_mutex); > return ret; > } > > > ---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program. ^ permalink raw reply [flat|nested] 4+ messages in thread
[parent not found: <200609170057.07460.arnd@arndb.de>]
* [PATCH 3/3] usbnet: improve generic ethtool support [not found] ` <200609170057.07460.arnd@arndb.de> @ 2006-09-16 23:03 ` Arnd Bergmann 2006-09-27 19:33 ` dhollis 0 siblings, 1 reply; 4+ messages in thread From: Arnd Bergmann @ 2006-09-16 23:03 UTC (permalink / raw) To: David Brownell Cc: linux-usb-devel, David Hollis, support, dbrownell, linux-kernel, Michael Helmling This adds generic support for the ethtool commands get_settings, set_settings, get_link and nway_reset to usbnet. These are now implemented using mii functions when a low-level driver supports mdio_read/mdio_write and does not override the usbnet ethtool commands with its own. Currently, this applies to the asix and the mcs7830 drivers. I have tested it on mcs7830. Signed-off-by: Arnd Bergmann <arnd@arndb.de> --- Index: linux-cg/drivers/usb/net/asix.c =================================================================== --- linux-cg.orig/drivers/usb/net/asix.c 2006-09-17 00:05:53.000000000 +0200 +++ linux-cg/drivers/usb/net/asix.c 2006-09-17 00:09:43.000000000 +0200 @@ -458,20 +458,6 @@ info->eedump_len = 0x3e; } -static int asix_get_settings(struct net_device *net, struct ethtool_cmd *cmd) -{ - struct usbnet *dev = netdev_priv(net); - - return mii_ethtool_gset(&dev->mii,cmd); -} - -static int asix_set_settings(struct net_device *net, struct ethtool_cmd *cmd) -{ - struct usbnet *dev = netdev_priv(net); - - return mii_ethtool_sset(&dev->mii,cmd); -} - /* We need to override some ethtool_ops so we require our own structure so we don't interfere with other usbnet devices that may be connected at the same time. */ @@ -484,8 +470,9 @@ .set_wol = asix_set_wol, .get_eeprom_len = asix_get_eeprom_len, .get_eeprom = asix_get_eeprom, - .get_settings = asix_get_settings, - .set_settings = asix_set_settings, + .get_settings = usbnet_get_settings, + .set_settings = usbnet_set_settings, + .nway_reset = usbnet_nway_reset, }; static int asix_ioctl (struct net_device *net, struct ifreq *rq, int cmd) @@ -564,8 +551,9 @@ .set_wol = asix_set_wol, .get_eeprom_len = asix_get_eeprom_len, .get_eeprom = asix_get_eeprom, - .get_settings = asix_get_settings, - .set_settings = asix_set_settings, + .get_settings = usbnet_get_settings, + .set_settings = usbnet_set_settings, + .nway_reset = usbnet_nway_reset, }; static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf) Index: linux-cg/drivers/usb/net/mcs7830.c =================================================================== --- linux-cg.orig/drivers/usb/net/mcs7830.c 2006-09-17 00:05:53.000000000 +0200 +++ linux-cg/drivers/usb/net/mcs7830.c 2006-09-17 00:06:21.000000000 +0200 @@ -430,8 +430,12 @@ .get_regs = mcs7830_get_regs, /* common usbnet calls */ + .get_link = usbnet_get_link, .get_msglevel = usbnet_get_msglevel, .set_msglevel = usbnet_set_msglevel, + .get_settings = usbnet_get_settings, + .set_settings = usbnet_set_settings, + .nway_reset = usbnet_nway_reset, }; static int mcs7830_bind(struct usbnet *dev, struct usb_interface *udev) Index: linux-cg/drivers/usb/net/usbnet.c =================================================================== --- linux-cg.orig/drivers/usb/net/usbnet.c 2006-09-17 00:05:53.000000000 +0200 +++ linux-cg/drivers/usb/net/usbnet.c 2006-09-17 00:07:45.000000000 +0200 @@ -645,6 +645,29 @@ * they'll probably want to use this base set. */ +int usbnet_get_settings (struct net_device *net, struct ethtool_cmd *cmd) +{ + struct usbnet *dev = netdev_priv(net); + + if (!dev->mii.mdio_read) + return -EOPNOTSUPP; + + return mii_ethtool_gset(&dev->mii, cmd); +} +EXPORT_SYMBOL_GPL(usbnet_get_settings); + +int usbnet_set_settings (struct net_device *net, struct ethtool_cmd *cmd) +{ + struct usbnet *dev = netdev_priv(net); + + if (!dev->mii.mdio_write) + return -EOPNOTSUPP; + + return mii_ethtool_sset(&dev->mii, cmd); +} +EXPORT_SYMBOL_GPL(usbnet_set_settings); + + void usbnet_get_drvinfo (struct net_device *net, struct ethtool_drvinfo *info) { struct usbnet *dev = netdev_priv(net); @@ -658,7 +681,7 @@ } EXPORT_SYMBOL_GPL(usbnet_get_drvinfo); -static u32 usbnet_get_link (struct net_device *net) +u32 usbnet_get_link (struct net_device *net) { struct usbnet *dev = netdev_priv(net); @@ -666,9 +689,14 @@ if (dev->driver_info->check_connect) return dev->driver_info->check_connect (dev) == 0; + /* if the device has mii operations, use those */ + if (dev->mii.mdio_read) + return mii_link_ok(&dev->mii); + /* Otherwise, say we're up (to avoid breaking scripts) */ return 1; } +EXPORT_SYMBOL_GPL(usbnet_get_link); u32 usbnet_get_msglevel (struct net_device *net) { @@ -686,10 +714,24 @@ } EXPORT_SYMBOL_GPL(usbnet_set_msglevel); +int usbnet_nway_reset(struct net_device *net) +{ + struct usbnet *dev = netdev_priv(net); + + if (!dev->mii.mdio_write) + return -EOPNOTSUPP; + + return mii_nway_restart(&dev->mii); +} +EXPORT_SYMBOL_GPL(usbnet_nway_reset); + /* drivers may override default ethtool_ops in their bind() routine */ static struct ethtool_ops usbnet_ethtool_ops = { + .get_settings = usbnet_get_settings, + .set_settings = usbnet_set_settings, .get_drvinfo = usbnet_get_drvinfo, .get_link = usbnet_get_link, + .nway_reset = usbnet_nway_reset, .get_msglevel = usbnet_get_msglevel, .set_msglevel = usbnet_set_msglevel, }; Index: linux-cg/drivers/usb/net/usbnet.h =================================================================== --- linux-cg.orig/drivers/usb/net/usbnet.h 2006-09-17 00:05:53.000000000 +0200 +++ linux-cg/drivers/usb/net/usbnet.h 2006-09-17 00:07:53.000000000 +0200 @@ -167,9 +167,13 @@ extern void usbnet_defer_kevent (struct usbnet *, int); extern void usbnet_skb_return (struct usbnet *, struct sk_buff *); +extern int usbnet_get_settings (struct net_device *net, struct ethtool_cmd *cmd); +extern int usbnet_set_settings (struct net_device *net, struct ethtool_cmd *cmd); +extern u32 usbnet_get_link (struct net_device *net); extern u32 usbnet_get_msglevel (struct net_device *); extern void usbnet_set_msglevel (struct net_device *, u32); extern void usbnet_get_drvinfo (struct net_device *, struct ethtool_drvinfo *); +extern int usbnet_nway_reset(struct net_device *net); /* messaging support includes the interface name, so it must not be * used before it has one ... notably, in minidriver bind() calls. ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH 3/3] usbnet: improve generic ethtool support 2006-09-16 23:03 ` [PATCH 3/3] usbnet: improve generic ethtool support Arnd Bergmann @ 2006-09-27 19:33 ` dhollis 0 siblings, 0 replies; 4+ messages in thread From: dhollis @ 2006-09-27 19:33 UTC (permalink / raw) To: Arnd Bergmann Cc: David Brownell, linux-usb-devel, support, dbrownell, linux-kernel, Michael Helmling Quoting Arnd Bergmann <arnd@arndb.de>: > This adds generic support for the ethtool commands get_settings, > set_settings, get_link and nway_reset to usbnet. These are now > implemented using mii functions when a low-level driver supports > mdio_read/mdio_write and does not override the usbnet ethtool > commands with its own. > > Currently, this applies to the asix and the mcs7830 drivers. > I have tested it on mcs7830. > > Signed-off-by: Arnd Bergmann <arnd@arndb.de> > Acked-by: David Hollis <dhollis@davehollis.com> > > Index: linux-cg/drivers/usb/net/asix.c > =================================================================== > --- linux-cg.orig/drivers/usb/net/asix.c 2006-09-17 00:05:53.000000000 +0200 > +++ linux-cg/drivers/usb/net/asix.c 2006-09-17 00:09:43.000000000 +0200 > @@ -458,20 +458,6 @@ > info->eedump_len = 0x3e; > } > > -static int asix_get_settings(struct net_device *net, struct > ethtool_cmd *cmd) > -{ > - struct usbnet *dev = netdev_priv(net); > - > - return mii_ethtool_gset(&dev->mii,cmd); > -} > - > -static int asix_set_settings(struct net_device *net, struct > ethtool_cmd *cmd) > -{ > - struct usbnet *dev = netdev_priv(net); > - > - return mii_ethtool_sset(&dev->mii,cmd); > -} > - > /* We need to override some ethtool_ops so we require our > own structure so we don't interfere with other usbnet > devices that may be connected at the same time. */ > @@ -484,8 +470,9 @@ > .set_wol = asix_set_wol, > .get_eeprom_len = asix_get_eeprom_len, > .get_eeprom = asix_get_eeprom, > - .get_settings = asix_get_settings, > - .set_settings = asix_set_settings, > + .get_settings = usbnet_get_settings, > + .set_settings = usbnet_set_settings, > + .nway_reset = usbnet_nway_reset, > }; > > static int asix_ioctl (struct net_device *net, struct ifreq *rq, int cmd) > @@ -564,8 +551,9 @@ > .set_wol = asix_set_wol, > .get_eeprom_len = asix_get_eeprom_len, > .get_eeprom = asix_get_eeprom, > - .get_settings = asix_get_settings, > - .set_settings = asix_set_settings, > + .get_settings = usbnet_get_settings, > + .set_settings = usbnet_set_settings, > + .nway_reset = usbnet_nway_reset, > }; > > static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf) > Index: linux-cg/drivers/usb/net/mcs7830.c > =================================================================== > --- linux-cg.orig/drivers/usb/net/mcs7830.c 2006-09-17 > 00:05:53.000000000 +0200 > +++ linux-cg/drivers/usb/net/mcs7830.c 2006-09-17 00:06:21.000000000 +0200 > @@ -430,8 +430,12 @@ > .get_regs = mcs7830_get_regs, > > /* common usbnet calls */ > + .get_link = usbnet_get_link, > .get_msglevel = usbnet_get_msglevel, > .set_msglevel = usbnet_set_msglevel, > + .get_settings = usbnet_get_settings, > + .set_settings = usbnet_set_settings, > + .nway_reset = usbnet_nway_reset, > }; > > static int mcs7830_bind(struct usbnet *dev, struct usb_interface *udev) > Index: linux-cg/drivers/usb/net/usbnet.c > =================================================================== > --- linux-cg.orig/drivers/usb/net/usbnet.c 2006-09-17 > 00:05:53.000000000 +0200 > +++ linux-cg/drivers/usb/net/usbnet.c 2006-09-17 00:07:45.000000000 +0200 > @@ -645,6 +645,29 @@ > * they'll probably want to use this base set. > */ > > +int usbnet_get_settings (struct net_device *net, struct ethtool_cmd *cmd) > +{ > + struct usbnet *dev = netdev_priv(net); > + > + if (!dev->mii.mdio_read) > + return -EOPNOTSUPP; > + > + return mii_ethtool_gset(&dev->mii, cmd); > +} > +EXPORT_SYMBOL_GPL(usbnet_get_settings); > + > +int usbnet_set_settings (struct net_device *net, struct ethtool_cmd *cmd) > +{ > + struct usbnet *dev = netdev_priv(net); > + > + if (!dev->mii.mdio_write) > + return -EOPNOTSUPP; > + > + return mii_ethtool_sset(&dev->mii, cmd); > +} > +EXPORT_SYMBOL_GPL(usbnet_set_settings); > + > + > void usbnet_get_drvinfo (struct net_device *net, struct > ethtool_drvinfo *info) > { > struct usbnet *dev = netdev_priv(net); > @@ -658,7 +681,7 @@ > } > EXPORT_SYMBOL_GPL(usbnet_get_drvinfo); > > -static u32 usbnet_get_link (struct net_device *net) > +u32 usbnet_get_link (struct net_device *net) > { > struct usbnet *dev = netdev_priv(net); > > @@ -666,9 +689,14 @@ > if (dev->driver_info->check_connect) > return dev->driver_info->check_connect (dev) == 0; > > + /* if the device has mii operations, use those */ > + if (dev->mii.mdio_read) > + return mii_link_ok(&dev->mii); > + > /* Otherwise, say we're up (to avoid breaking scripts) */ > return 1; > } > +EXPORT_SYMBOL_GPL(usbnet_get_link); > > u32 usbnet_get_msglevel (struct net_device *net) > { > @@ -686,10 +714,24 @@ > } > EXPORT_SYMBOL_GPL(usbnet_set_msglevel); > > +int usbnet_nway_reset(struct net_device *net) > +{ > + struct usbnet *dev = netdev_priv(net); > + > + if (!dev->mii.mdio_write) > + return -EOPNOTSUPP; > + > + return mii_nway_restart(&dev->mii); > +} > +EXPORT_SYMBOL_GPL(usbnet_nway_reset); > + > /* drivers may override default ethtool_ops in their bind() routine */ > static struct ethtool_ops usbnet_ethtool_ops = { > + .get_settings = usbnet_get_settings, > + .set_settings = usbnet_set_settings, > .get_drvinfo = usbnet_get_drvinfo, > .get_link = usbnet_get_link, > + .nway_reset = usbnet_nway_reset, > .get_msglevel = usbnet_get_msglevel, > .set_msglevel = usbnet_set_msglevel, > }; > Index: linux-cg/drivers/usb/net/usbnet.h > =================================================================== > --- linux-cg.orig/drivers/usb/net/usbnet.h 2006-09-17 > 00:05:53.000000000 +0200 > +++ linux-cg/drivers/usb/net/usbnet.h 2006-09-17 00:07:53.000000000 +0200 > @@ -167,9 +167,13 @@ > extern void usbnet_defer_kevent (struct usbnet *, int); > extern void usbnet_skb_return (struct usbnet *, struct sk_buff *); > > +extern int usbnet_get_settings (struct net_device *net, struct > ethtool_cmd *cmd); > +extern int usbnet_set_settings (struct net_device *net, struct > ethtool_cmd *cmd); > +extern u32 usbnet_get_link (struct net_device *net); > extern u32 usbnet_get_msglevel (struct net_device *); > extern void usbnet_set_msglevel (struct net_device *, u32); > extern void usbnet_get_drvinfo (struct net_device *, struct > ethtool_drvinfo *); > +extern int usbnet_nway_reset(struct net_device *net); > > /* messaging support includes the interface name, so it must not be > * used before it has one ... notably, in minidriver bind() calls. > > ---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program. ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2006-09-27 19:33 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <200609170055.34565.arnd@arndb.de>
2006-09-16 23:03 ` [PATCH 2/3] usbnet: add a mutex around phy register access Arnd Bergmann
2006-09-27 19:33 ` dhollis
[not found] ` <200609170057.07460.arnd@arndb.de>
2006-09-16 23:03 ` [PATCH 3/3] usbnet: improve generic ethtool support Arnd Bergmann
2006-09-27 19:33 ` dhollis
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox
Powered by JetHome