[PATCH] [MMC] Avoid some resets without card

[PATCH] [MMC] Avoid some resets without card

[Pierre Ossman]

Some Ricoh controllers only respect a full reset when there is no
card in the slot. As we wait for the reset to complete, we must
avoid even requesting those resets on the buggy controllers.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
---

 drivers/mmc/sdhci.c |   17 +++++++++++++----
 1 files changed, 13 insertions(+), 4 deletions(-)

diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c
index 9ff9231..20711ac 100644
--- a/drivers/mmc/sdhci.c
+++ b/drivers/mmc/sdhci.c
@@ -35,6 +35,8 @@ static unsigned int debug_quirks = 0;
 
 #define SDHCI_QUIRK_CLOCK_BEFORE_RESET			(1<<0)
 #define SDHCI_QUIRK_FORCE_DMA				(1<<1)
+/* Controller doesn't like some resets when there is no card inserted. */
+#define SDHCI_QUIRK_NO_CARD_NO_RESET			(1<<2)
 
 static const struct pci_device_id pci_ids[] __devinitdata = {
 	{
@@ -51,7 +53,8 @@ static const struct pci_device_id pci_id
 		.device		= PCI_DEVICE_ID_RICOH_R5C822,
 		.subvendor	= PCI_ANY_ID,
 		.subdevice	= PCI_ANY_ID,
-		.driver_data	= SDHCI_QUIRK_FORCE_DMA,
+		.driver_data	= SDHCI_QUIRK_FORCE_DMA |
+				  SDHCI_QUIRK_NO_CARD_NO_RESET,
 	},
 
 	{
@@ -125,6 +128,12 @@ static void sdhci_reset(struct sdhci_hos
 {
 	unsigned long timeout;
 
+	if (host->chip->quirks & SDHCI_QUIRK_NO_CARD_NO_RESET) {
+		if (!(readl(host->ioaddr + SDHCI_PRESENT_STATE) &
+			SDHCI_CARD_PRESENT))
+			return;
+	}
+
 	writeb(mask, host->ioaddr + SDHCI_SOFTWARE_RESET);
 
 	if (mask & SDHCI_RESET_ALL)
@@ -1174,6 +1183,9 @@ static int __devinit sdhci_probe_slot(st
 	host = mmc_priv(mmc);
 	host->mmc = mmc;
 
+	host->chip = chip;
+	chip->hosts[slot] = host;
+
 	host->bar = first_bar + slot;
 
 	host->addr = pci_resource_start(pdev, host->bar);
@@ -1330,9 +1342,6 @@ #ifdef CONFIG_MMC_DEBUG
 	sdhci_dumpregs(host);
 #endif
 
-	host->chip = chip;
-	chip->hosts[slot] = host;
-
 	mmiowb();
 
 	mmc_add_host(mmc);