* [PATCH] Use time_after instead of comparisons for jiffies
@ 2006-10-20 0:07 David KOENIG
2006-10-20 0:55 ` [KJ] " Randy Dunlap
0 siblings, 1 reply; 2+ messages in thread
From: David KOENIG @ 2006-10-20 0:07 UTC (permalink / raw)
To: kernel-janitors, linux-kernel
---
drivers/net/tokenring/3c359.c | 29 +++++++++++++++--------------
1 files changed, 15 insertions(+), 14 deletions(-)
diff --git a/drivers/net/tokenring/3c359.c b/drivers/net/tokenring/3c359.c
index 7580bde..8ebcef1 100644
--- a/drivers/net/tokenring/3c359.c
+++ b/drivers/net/tokenring/3c359.c
@@ -48,6 +48,7 @@ #include <linux/errno.h>
#include <linux/timer.h>
#include <linux/in.h>
#include <linux/ioport.h>
+#include <linux/jiffies.h>
#include <linux/string.h>
#include <linux/proc_fs.h>
#include <linux/ptrace.h>
@@ -409,7 +410,7 @@ static int xl_hw_reset(struct net_device
t=jiffies;
while (readw(xl_mmio + MMIO_INTSTATUS) & INTSTAT_CMD_IN_PROGRESS) {
schedule();
- if(jiffies-t > 40*HZ) {
+ if(time_after(jiffies, t + HZ * 2)) {
printk(KERN_ERR "%s: 3COM 3C359 Velocity XL card not responding to global
reset.\n", dev->name);
return -ENODEV;
}
@@ -520,7 +521,7 @@ #endif
t=jiffies;
while ( !(readw(xl_mmio + MMIO_INTSTATUS_AUTO) & INTSTAT_SRB) ) {
schedule();
- if(jiffies-t > 15*HZ) {
+ if(time_after(jiffies, t + 15 * HZ)) {
printk(KERN_ERR "3COM 3C359 Velocity XL card not responding.\n");
return -ENODEV;
}
@@ -795,8 +796,8 @@ static int xl_open_hw(struct net_device
t=jiffies;
while (! (readw(xl_mmio + MMIO_INTSTATUS) & INTSTAT_SRB)) {
- schedule();
- if(jiffies-t > 40*HZ) {
+ schedule();
+ if(time_after(jiffies, t + 40 * HZ) {
printk(KERN_ERR "3COM 3C359 Velocity XL card not responding.\n");
break ;
}
@@ -1010,8 +1011,8 @@ static void xl_reset(struct net_device *
*/
t=jiffies;
- while (readw(xl_mmio + MMIO_INTSTATUS) & INTSTAT_CMD_IN_PROGRESS) {
- if(jiffies-t > 40*HZ) {
+ while (readw(xl_mmio + MMIO_INTSTATUS) & INTSTAT_CMD_IN_PROGRESS) {
+ if(time_after(jiffies, t + 40 * HZ)) {
printk(KERN_ERR "3COM 3C359 Velocity XL card not responding.\n");
break ;
}
@@ -1282,8 +1283,8 @@ static int xl_close(struct net_device *d
writew(DNSTALL, xl_mmio + MMIO_COMMAND) ;
t=jiffies;
while (readw(xl_mmio + MMIO_INTSTATUS) & INTSTAT_CMD_IN_PROGRESS) {
- schedule();
- if(jiffies-t > 10*HZ) {
+ schedule();
+ if(time_after(jiffies, t + 10 * HZ)) {
printk(KERN_ERR "%s: 3COM 3C359 Velocity XL-DNSTALL not responding.\n",
dev->name);
break ;
}
@@ -1291,8 +1292,8 @@ static int xl_close(struct net_device *d
writew(DNDISABLE, xl_mmio + MMIO_COMMAND) ;
t=jiffies;
while (readw(xl_mmio + MMIO_INTSTATUS) & INTSTAT_CMD_IN_PROGRESS) {
- schedule();
- if(jiffies-t > 10*HZ) {
+ schedule();
+ if(time_after(jiffies, t + 10 * HZ)) {
printk(KERN_ERR "%s: 3COM 3C359 Velocity XL-DNDISABLE not responding.\n",
dev->name);
break ;
}
@@ -1301,7 +1302,7 @@ static int xl_close(struct net_device *d
t=jiffies;
while (readw(xl_mmio + MMIO_INTSTATUS) & INTSTAT_CMD_IN_PROGRESS) {
schedule();
- if(jiffies-t > 10*HZ) {
+ if(time_after(jiffies, t + 10 * HZ)) {
printk(KERN_ERR "%s: 3COM 3C359 Velocity XL-UPSTALL not responding.\n",
dev->name);
break ;
}
@@ -1318,7 +1319,7 @@ static int xl_close(struct net_device *d
t=jiffies;
while (!(readw(xl_mmio + MMIO_INTSTATUS) & INTSTAT_SRB)) {
schedule();
- if(jiffies-t > 10*HZ) {
+ if(time_after(jiffies, t + 10 * HZ)) {
printk(KERN_ERR "%s: 3COM 3C359 Velocity XL-CLOSENIC not responding.\n",
dev->name);
break ;
}
@@ -1347,7 +1348,7 @@ static int xl_close(struct net_device *d
t=jiffies;
while (readw(xl_mmio + MMIO_INTSTATUS) & INTSTAT_CMD_IN_PROGRESS) {
schedule();
- if(jiffies-t > 10*HZ) {
+ if(time_after(jiffies, t + 10 * HZ)) {
printk(KERN_ERR "%s: 3COM 3C359 Velocity XL-UPRESET not responding.\n",
dev->name);
break ;
}
@@ -1356,7 +1357,7 @@ static int xl_close(struct net_device *d
t=jiffies;
while (readw(xl_mmio + MMIO_INTSTATUS) & INTSTAT_CMD_IN_PROGRESS) {
schedule();
- if(jiffies-t > 10*HZ) {
+ if(time_after(jiffies, t + 10 * HZ)) {
printk(KERN_ERR "%s: 3COM 3C359 Velocity XL-DNRESET not responding.\n",
dev->name);
break ;
}
--
1.4.1
--
<>< karhudever@gmail.com
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [KJ] [PATCH] Use time_after instead of comparisons for jiffies
2006-10-20 0:07 [PATCH] Use time_after instead of comparisons for jiffies David KOENIG
@ 2006-10-20 0:55 ` Randy Dunlap
0 siblings, 0 replies; 2+ messages in thread
From: Randy Dunlap @ 2006-10-20 0:55 UTC (permalink / raw)
To: David KOENIG; +Cc: kernel-janitors, linux-kernel
On Thu, 19 Oct 2006 17:07:54 -0700 David KOENIG wrote:
> ---
> drivers/net/tokenring/3c359.c | 29 +++++++++++++++--------------
> 1 files changed, 15 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/net/tokenring/3c359.c b/drivers/net/tokenring/3c359.c
> index 7580bde..8ebcef1 100644
> --- a/drivers/net/tokenring/3c359.c
> +++ b/drivers/net/tokenring/3c359.c
> @@ -48,6 +48,7 @@ #include <linux/errno.h>
> #include <linux/timer.h>
> #include <linux/in.h>
> #include <linux/ioport.h>
> +#include <linux/jiffies.h>
> #include <linux/string.h>
> #include <linux/proc_fs.h>
> #include <linux/ptrace.h>
> @@ -409,7 +410,7 @@ static int xl_hw_reset(struct net_device
> t=jiffies;
> while (readw(xl_mmio + MMIO_INTSTATUS) & INTSTAT_CMD_IN_PROGRESS) {
> schedule();
> - if(jiffies-t > 40*HZ) {
> + if(time_after(jiffies, t + HZ * 2)) {
Why is this one HZ * 2 instead of 40 * HZ, whereas none of
the others were changed like this?
and since most of this driver uses
if (
instead of
if(
please change those lines to that (preferred) style while you are there.
> printk(KERN_ERR "%s: 3COM 3C359 Velocity XL card not responding to global
> reset.\n", dev->name);
> return -ENODEV;
> }
> @@ -520,7 +521,7 @@ #endif
> t=jiffies;
> while ( !(readw(xl_mmio + MMIO_INTSTATUS_AUTO) & INTSTAT_SRB) ) {
> schedule();
> - if(jiffies-t > 15*HZ) {
> + if(time_after(jiffies, t + 15 * HZ)) {
> printk(KERN_ERR "3COM 3C359 Velocity XL card not responding.\n");
> return -ENODEV;
> }
> @@ -795,8 +796,8 @@ static int xl_open_hw(struct net_device
>
> t=jiffies;
> while (! (readw(xl_mmio + MMIO_INTSTATUS) & INTSTAT_SRB)) {
> - schedule();
> - if(jiffies-t > 40*HZ) {
> + schedule();
> + if(time_after(jiffies, t + 40 * HZ) {
> printk(KERN_ERR "3COM 3C359 Velocity XL card not responding.\n");
> break ;
> }
> @@ -1010,8 +1011,8 @@ static void xl_reset(struct net_device *
> */
>
> t=jiffies;
> - while (readw(xl_mmio + MMIO_INTSTATUS) & INTSTAT_CMD_IN_PROGRESS) {
> - if(jiffies-t > 40*HZ) {
> + while (readw(xl_mmio + MMIO_INTSTATUS) & INTSTAT_CMD_IN_PROGRESS) {
> + if(time_after(jiffies, t + 40 * HZ)) {
> printk(KERN_ERR "3COM 3C359 Velocity XL card not responding.\n");
> break ;
> }
> @@ -1282,8 +1283,8 @@ static int xl_close(struct net_device *d
> writew(DNSTALL, xl_mmio + MMIO_COMMAND) ;
> t=jiffies;
> while (readw(xl_mmio + MMIO_INTSTATUS) & INTSTAT_CMD_IN_PROGRESS) {
> - schedule();
> - if(jiffies-t > 10*HZ) {
> + schedule();
> + if(time_after(jiffies, t + 10 * HZ)) {
> printk(KERN_ERR "%s: 3COM 3C359 Velocity XL-DNSTALL not responding.\n",
> dev->name);
> break ;
> }
> @@ -1291,8 +1292,8 @@ static int xl_close(struct net_device *d
> writew(DNDISABLE, xl_mmio + MMIO_COMMAND) ;
> t=jiffies;
> while (readw(xl_mmio + MMIO_INTSTATUS) & INTSTAT_CMD_IN_PROGRESS) {
> - schedule();
> - if(jiffies-t > 10*HZ) {
> + schedule();
> + if(time_after(jiffies, t + 10 * HZ)) {
> printk(KERN_ERR "%s: 3COM 3C359 Velocity XL-DNDISABLE not responding.\n",
> dev->name);
> break ;
> }
> @@ -1301,7 +1302,7 @@ static int xl_close(struct net_device *d
> t=jiffies;
> while (readw(xl_mmio + MMIO_INTSTATUS) & INTSTAT_CMD_IN_PROGRESS) {
> schedule();
> - if(jiffies-t > 10*HZ) {
> + if(time_after(jiffies, t + 10 * HZ)) {
> printk(KERN_ERR "%s: 3COM 3C359 Velocity XL-UPSTALL not responding.\n",
> dev->name);
> break ;
> }
> @@ -1318,7 +1319,7 @@ static int xl_close(struct net_device *d
> t=jiffies;
> while (!(readw(xl_mmio + MMIO_INTSTATUS) & INTSTAT_SRB)) {
> schedule();
> - if(jiffies-t > 10*HZ) {
> + if(time_after(jiffies, t + 10 * HZ)) {
> printk(KERN_ERR "%s: 3COM 3C359 Velocity XL-CLOSENIC not responding.\n",
> dev->name);
> break ;
> }
> @@ -1347,7 +1348,7 @@ static int xl_close(struct net_device *d
> t=jiffies;
> while (readw(xl_mmio + MMIO_INTSTATUS) & INTSTAT_CMD_IN_PROGRESS) {
> schedule();
> - if(jiffies-t > 10*HZ) {
> + if(time_after(jiffies, t + 10 * HZ)) {
> printk(KERN_ERR "%s: 3COM 3C359 Velocity XL-UPRESET not responding.\n",
> dev->name);
> break ;
> }
> @@ -1356,7 +1357,7 @@ static int xl_close(struct net_device *d
> t=jiffies;
> while (readw(xl_mmio + MMIO_INTSTATUS) & INTSTAT_CMD_IN_PROGRESS) {
> schedule();
> - if(jiffies-t > 10*HZ) {
> + if(time_after(jiffies, t + 10 * HZ)) {
> printk(KERN_ERR "%s: 3COM 3C359 Velocity XL-DNRESET not responding.\n",
> dev->name);
> break ;
> }
> --
---
~Randy
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2006-10-20 0:54 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2006-10-20 0:07 [PATCH] Use time_after instead of comparisons for jiffies David KOENIG
2006-10-20 0:55 ` [KJ] " Randy Dunlap
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®