[PATCH 7/8] V4L/DVB (4817): Fix uses of "&&" where "&" was intended

[mchehab@infradead.org]

From: Jean Delvare <khali@linux-fr.org>

Fix uses of "&&" where "&" was intended in bttv-cards.c and tveeprom.c

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
---

 drivers/media/video/bt8xx/bttv-cards.c |    2 +-
 drivers/media/video/tveeprom.c         |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/media/video/bt8xx/bttv-cards.c b/drivers/media/video/bt8xx/bttv-cards.c
index a84903e..21ebe8f 100644
--- a/drivers/media/video/bt8xx/bttv-cards.c
+++ b/drivers/media/video/bt8xx/bttv-cards.c
@@ -4001,7 +4001,7 @@ static void __devinit init_PXC200(struct
  *      - sleep 1ms
  *      - write 0x0E
  *     read from GPIO_DATA into buf (uint_32)
- *      - if ( buf>>18 & 0x01 ) || ( buf>>19 && 0x01 != 0 )
+ *      - if ( buf>>18 & 0x01 ) || ( buf>>19 & 0x01 != 0 )
  *                error. ERROR_CPLD_Check_Failed.
  */
 /* ----------------------------------------------------------------------- */
diff --git a/drivers/media/video/tveeprom.c b/drivers/media/video/tveeprom.c
index e6baaee..6b9ef73 100644
--- a/drivers/media/video/tveeprom.c
+++ b/drivers/media/video/tveeprom.c
@@ -468,7 +468,7 @@ void tveeprom_hauppauge_analog(struct i2
 				(eeprom_data[i+6] << 8) +
 				(eeprom_data[i+7] << 16);
 
-				if ( (eeprom_data[i + 8] && 0xf0) &&
+				if ( (eeprom_data[i + 8] & 0xf0) &&
 					(tvee->serial_number < 0xffffff) ) {
 					tvee->MAC_address[0] = 0x00;
 					tvee->MAC_address[1] = 0x0D;