[patch] i386/x86_64: ACPI cpu_idle

mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed

* [patch] i386/x86_64: ACPI cpu_idle_wait() fix
       [not found]                 ` <20061117124913.GA24893@upset.pdb.fsc.net>
@ 2006-11-17 13:26                   ` Ingo Molnar
  2006-11-17 13:31                     ` Ingo Molnar
  0 siblings, 1 reply; 4+ messages in thread
From: Ingo Molnar @ 2006-11-17 13:26 UTC (permalink / raw)
  To: linux-kernel
  Cc: Andrew Morton, Wolfgang Erig, Andreas Friedrich, Adrian Bunk,
	Greg Kroah-Hartman, Linus Torvalds

Subject: [patch] i386/x86_64: ACPI cpu_idle_wait() fix
From: Ingo Molnar <mingo@elte.hu>

The scheduler on Andreas Friedrich's hyperthreading system
stopped working properly as of 2.6.18: the scheduler would
never move tasks to another CPU!

after a couple of attempts to corner the bug, the following
smoking gun was found:

BIOS reported wrong ACPI idfor the processor
CPU#1: set_cpus_allowed(), swapper:1, 3 -> 2
 [<c0103bbe>] show_trace_log_lvl+0x34/0x4a
 [<c0103ceb>] show_trace+0x2c/0x2e
 [<c01045f8>] dump_stack+0x2b/0x2d
 [<c0116a77>] set_cpus_allowed+0x52/0xec
 [<c0101d86>] cpu_idle_wait+0x2e/0x100
 [<c0259c57>] acpi_processor_power_exit+0x45/0x58
 [<c0259752>] acpi_processor_remove+0x46/0xea
 [<c025c6fb>] acpi_start_single_object+0x47/0x54
 [<c025cee5>] acpi_bus_register_driver+0xa4/0xd3
 [<c04ab2d7>] acpi_processor_init+0x57/0x77
 [<c01004d7>] init+0x146/0x2fd
 [<c0103a87>] kernel_thread_helper+0x7/0x10

a quick look at cpu_idle_wait() shows how broken that code is
on i386: it changes the init task's affinity map but never
restores it ...

and because all userspace tasks get forked by init, they all
inherited that single-CPU affinity mask. x86_64 cloned this
bug too.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/i386/kernel/process.c   |    4 +++-
 arch/x86_64/kernel/process.c |    4 +++-
 2 files changed, 6 insertions(+), 2 deletions(-)

Index: linux/arch/i386/kernel/process.c
===================================================================
--- linux.orig/arch/i386/kernel/process.c
+++ linux/arch/i386/kernel/process.c
@@ -205,7 +205,7 @@ void cpu_idle(void)
 void cpu_idle_wait(void)
 {
 	unsigned int cpu, this_cpu = get_cpu();
-	cpumask_t map;
+	cpumask_t map, tmp = current->cpus_allowed;
 
 	set_cpus_allowed(current, cpumask_of_cpu(this_cpu));
 	put_cpu();
@@ -227,6 +227,8 @@ void cpu_idle_wait(void)
 		}
 		cpus_and(map, map, cpu_online_map);
 	} while (!cpus_empty(map));
+
+	set_cpus_allowed(current, tmp);
 }
 EXPORT_SYMBOL_GPL(cpu_idle_wait);
 
Index: linux/arch/x86_64/kernel/process.c
===================================================================
--- linux.orig/arch/x86_64/kernel/process.c
+++ linux/arch/x86_64/kernel/process.c
@@ -144,7 +144,7 @@ static void poll_idle (void)
 void cpu_idle_wait(void)
 {
 	unsigned int cpu, this_cpu = get_cpu();
-	cpumask_t map;
+	cpumask_t map, tmp = current->cpus_allowed;
 
 	set_cpus_allowed(current, cpumask_of_cpu(this_cpu));
 	put_cpu();
@@ -167,6 +167,8 @@ void cpu_idle_wait(void)
 		}
 		cpus_and(map, map, cpu_online_map);
 	} while (!cpus_empty(map));
+
+	set_cpus_allowed(current, tmp);
 }
 EXPORT_SYMBOL_GPL(cpu_idle_wait);
 

^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: [patch] i386/x86_64: ACPI cpu_idle_wait() fix
  2006-11-17 13:26                   ` [patch] i386/x86_64: ACPI cpu_idle_wait() fix Ingo Molnar
@ 2006-11-17 13:31                     ` Ingo Molnar
  2006-11-17 19:18                       ` Andrew Morton
  0 siblings, 1 reply; 4+ messages in thread
From: Ingo Molnar @ 2006-11-17 13:31 UTC (permalink / raw)
  To: linux-kernel
  Cc: Andrew Morton, Wolfgang Erig, Andreas Friedrich, Adrian Bunk,
	Greg Kroah-Hartman, Linus Torvalds


* Ingo Molnar <mingo@elte.hu> wrote:

> The scheduler on Andreas Friedrich's hyperthreading system stopped 
> working properly as of 2.6.18: the scheduler would never move tasks to 
> another CPU!

correction: the last known working kernel was 2.6.8. The bug predates 
our GIT history so it's older than 1.5 years.

	Ingo

^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: [patch] i386/x86_64: ACPI cpu_idle_wait() fix
  2006-11-17 13:31                     ` Ingo Molnar
@ 2006-11-17 19:18                       ` Andrew Morton
  2006-11-17 19:26                         ` Ingo Molnar
  0 siblings, 1 reply; 4+ messages in thread
From: Andrew Morton @ 2006-11-17 19:18 UTC (permalink / raw)
  To: Ingo Molnar
  Cc: linux-kernel, Wolfgang Erig, Andreas Friedrich, Adrian Bunk,
	Greg Kroah-Hartman, Linus Torvalds, Brown, Len, linux-acpi

On Fri, 17 Nov 2006 14:31:28 +0100
Ingo Molnar <mingo@elte.hu> wrote:

> 
> * Ingo Molnar <mingo@elte.hu> wrote:
> 
> > The scheduler on Andreas Friedrich's hyperthreading system stopped 
> > working properly as of 2.6.18: the scheduler would never move tasks to 
> > another CPU!
> 
> correction: the last known working kernel was 2.6.8. The bug predates 
> our GIT history so it's older than 1.5 years.
> 

How come nobody noticed?  Maybe it improved things ;)

I spose it's 2.6.19 material, although it's a bit of a leap into the
unknown.

How many systems will this affect?


CPU#1: set_cpus_allowed(), swapper:1, 3 -> 2
 [<c0103bbe>] show_trace_log_lvl+0x34/0x4a
 [<c0103ceb>] show_trace+0x2c/0x2e
 [<c01045f8>] dump_stack+0x2b/0x2d
 [<c0116a77>] set_cpus_allowed+0x52/0xec
 [<c0101d86>] cpu_idle_wait+0x2e/0x100
 [<c0259c57>] acpi_processor_power_exit+0x45/0x58
 [<c0259752>] acpi_processor_remove+0x46/0xea
 [<c025c6fb>] acpi_start_single_object+0x47/0x54
 [<c025cee5>] acpi_bus_register_driver+0xa4/0xd3
 [<c04ab2d7>] acpi_processor_init+0x57/0x77
 [<c01004d7>] init+0x146/0x2fd
 [<c0103a87>] kernel_thread_helper+0x7/0x10

It seems strange that the kernel is calling acpi_processor_power_exit() at
this stage.  It'll have happened because acpi_start_single_object()'s call
to acpi_processor_start() returned non-zero.  Why did that happen?

> static int __cpuinit acpi_processor_start(struct acpi_device *device)
> {
> 	int result = 0;
> 	acpi_status status = AE_OK;
> 	struct acpi_processor *pr;
> 
> 
> 	pr = acpi_driver_data(device);
> 
> 	result = acpi_processor_get_info(pr);
> 	if (result) {
> 		/* Processor is physically not present */
> 		return 0;

Surely that should be either AE_OK (but why?) or -ESOMETHING.

> 	}
> 
> 	BUG_ON((pr->id >= NR_CPUS) || (pr->id < 0));
> 
> 	/*
> 	 * Buggy BIOS check
> 	 * ACPI id of processors can be reported wrongly by the BIOS.
> 	 * Don't trust it blindly
> 	 */
> 	if (processor_device_array[pr->id] != NULL &&
> 	    processor_device_array[pr->id] != device) {
> 		printk(KERN_WARNING "BIOS reported wrong ACPI id"
> 			"for the processor\n");
> 		return -ENODEV;

Andreas wasn't seeing that, right?

> 	}
> 	processor_device_array[pr->id] = device;
> 
> 	processors[pr->id] = pr;
> 
> 	result = acpi_processor_add_fs(device);
> 	if (result)
> 		goto end;

I'd assume that this is failing.  I wonder why?

> 	status = acpi_install_notify_handler(pr->handle, ACPI_DEVICE_NOTIFY,
> 					     acpi_processor_notify, pr);

whoops, this return value gets lost.

> 	/* _PDC call should be done before doing anything else (if reqd.). */
> 	arch_acpi_processor_init_pdc(pr);
> 	acpi_processor_set_pdc(pr);
> 
> 	acpi_processor_power_init(pr, device);
> 
> 	if (pr->flags.throttling) {
> 		printk(KERN_INFO PREFIX "%s [%s] (supports",
> 		       acpi_device_name(device), acpi_device_bid(device));
> 		printk(" %d throttling states", pr->throttling.state_count);
> 		printk(")\n");
> 	}
> 
>       end:
> 
> 	return result;
> }
> 
> 
> 
> 

^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: [patch] i386/x86_64: ACPI cpu_idle_wait() fix
  2006-11-17 19:18                       ` Andrew Morton
@ 2006-11-17 19:26                         ` Ingo Molnar
  0 siblings, 0 replies; 4+ messages in thread
From: Ingo Molnar @ 2006-11-17 19:26 UTC (permalink / raw)
  To: Andrew Morton
  Cc: linux-kernel, Wolfgang Erig, Andreas Friedrich, Adrian Bunk,
	Greg Kroah-Hartman, Linus Torvalds, Brown, Len, linux-acpi

[-- Attachment #1: Type: text/plain, Size: 1925 bytes --]


* Andrew Morton <akpm@osdl.org> wrote:

> > correction: the last known working kernel was 2.6.8. The bug 
> > predates our GIT history so it's older than 1.5 years.
> 
> How come nobody noticed?  Maybe it improved things ;)
> 
> I spose it's 2.6.19 material, although it's a bit of a leap into the 
> unknown.

i think it's 2.6.19 material. A kernel release that will speed up some 
systems quite noticeably ;-)

> How many systems will this affect?

dont know - it should be relatively rare - maybe the ACPI guys know when 
this has a chance to trigger?

> CPU#1: set_cpus_allowed(), swapper:1, 3 -> 2
>  [<c0103bbe>] show_trace_log_lvl+0x34/0x4a
>  [<c0103ceb>] show_trace+0x2c/0x2e
>  [<c01045f8>] dump_stack+0x2b/0x2d
>  [<c0116a77>] set_cpus_allowed+0x52/0xec
>  [<c0101d86>] cpu_idle_wait+0x2e/0x100
>  [<c0259c57>] acpi_processor_power_exit+0x45/0x58
>  [<c0259752>] acpi_processor_remove+0x46/0xea
>  [<c025c6fb>] acpi_start_single_object+0x47/0x54
>  [<c025cee5>] acpi_bus_register_driver+0xa4/0xd3
>  [<c04ab2d7>] acpi_processor_init+0x57/0x77
>  [<c01004d7>] init+0x146/0x2fd
>  [<c0103a87>] kernel_thread_helper+0x7/0x10
> 
> It seems strange that the kernel is calling 
> acpi_processor_power_exit() at this stage.  It'll have happened 
> because acpi_start_single_object()'s call to acpi_processor_start() 
> returned non-zero.  Why did that happen?

ah, maybe due to:

 BIOS reported wrong ACPI idfor the processor

google gives 4 hits, so i guess it's relatively rare.

> > 	/*
> > 	 * Buggy BIOS check
> > 	 * ACPI id of processors can be reported wrongly by the BIOS.
> > 	 * Don't trust it blindly
> > 	 */
> > 	if (processor_device_array[pr->id] != NULL &&
> > 	    processor_device_array[pr->id] != device) {
> > 		printk(KERN_WARNING "BIOS reported wrong ACPI id"
> > 			"for the processor\n");
> > 		return -ENODEV;
> 
> Andreas wasn't seeing that, right?

he was actually! dmesg.txt attached.

	Ingo

[-- Attachment #2: dmesg.txt --]
[-- Type: text/plain, Size: 14371 bytes --]

Linux version 2.6.19-rc5 (root@yvonne) (gcc version 4.1.2 20061028 (prerelease) (Debian 4.1.1-19)) #3 SMP PREEMPT Thu Nov 16 12:50:49 CET 2006
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000003f6f0000 (usable)
 BIOS-e820: 000000003f6f0000 - 000000003f6fb000 (ACPI data)
 BIOS-e820: 000000003f6fb000 - 000000003f700000 (ACPI NVS)
 BIOS-e820: 000000003f700000 - 000000003f780000 (usable)
 BIOS-e820: 000000003f780000 - 0000000040000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
 BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved)
 BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
119MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f78a0
Entering add_active_range(0, 0, 259968) 0 entries of 256 used
Zone PFN ranges:
  DMA             0 ->     4096
  Normal       4096 ->   229376
  HighMem    229376 ->   259968
early_node_map[1] active PFN ranges
    0:        0 ->   259968
On node 0 totalpages: 259968
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 4064 pages, LIFO batch:0
  Normal zone: 1760 pages used for memmap
  Normal zone: 223520 pages, LIFO batch:31
  HighMem zone: 239 pages used for memmap
  HighMem zone: 30353 pages, LIFO batch:7
DMI present.
ACPI: RSDP (v000 PTLTD                                 ) @ 0x000f7900
ACPI: RSDT (v001 PTLTD    RSDT   0x00050000  LTP 0x00000000) @ 0x3f6f7421
ACPI: FADT (v001 FSC    D156x    0x00050000      0x000f4240) @ 0x3f6f7451
ACPI: MADT (v001 FSC    	 APIC   0x00050000  CSF 0x00000000) @ 0x3f6faf76
ACPI: BOOT (v001 PTLTD  $SBFTBL$ 0x00050000  LTP 0x00000001) @ 0x3f6fafd8
ACPI: DSDT (v001 FSC    D156x    0x00050000 MSFT 0x02000002) @ 0x00000000
ACPI: PM-Timer IO Port: 0xf008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:2 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 15:2 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
Detected 2593.696 MHz processor.
Built 1 zonelists.  Total pages: 257937
Kernel command line: 
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Console: colour VGA+ 80x25
num_possible_cpus(): 2
CPU#0: allocated 4194272 bytes trace buffer.
CPU#0: allocated 4194272 bytes max-trace buffer.
CPU#1: allocated 4194272 bytes trace buffer.
CPU#1: allocated 4194272 bytes max-trace buffer.
allocated 8388544 bytes out-trace buffer.
tracer: a total of 25165632 bytes allocated.
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1001348k/1039872k available (2720k kernel code, 37852k reserved, 911k data, 208k init, 122304k highmem)
virtual kernel memory layout:
    fixmap  : 0xfff4f000 - 0xfffff000   ( 704 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
      .init : 0xc0494000 - 0xc04c8000   ( 208 kB)
      .data : 0xc03a82ba - 0xc048c0cc   ( 911 kB)
      .text : 0xc0100000 - 0xc03a82ba   (2720 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 5191.55 BogoMIPS (lpj=10383118)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
Freeing SMP alternatives: 16k freed
ACPI: Core revision 20060707
CPU0: Intel(R) Pentium(R) 4 CPU 2.60GHz stepping 09
Booting processor 1/1 eip 2000
Initializing CPU#1
Calibrating delay using timer specific routine.. 5187.42 BogoMIPS (lpj=10374840)
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
CPU1: Intel(R) Pentium(R) 4 CPU 2.60GHz stepping 09
Total of 2 processors activated (10378.97 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization across 2 CPUs: passed.
Brought up 2 CPUs
migration_cost=125
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd8cb, last bus=3
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:00:02.0
PCI quirk: region f000-f07f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region f180-f1bf claimed by ICH4 GPIO
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CSAB._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIH._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: Device [LPT] status [00000008]: functional but not present; setting present
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
PCI: Bridge: 0000:00:03.0
  IO window: 4000-4fff
  MEM window: e0100000-e01fffff
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Simple Boot Flag at 0x69 set to 0x1
Machine check exception polling timer started.
highmem bounce pool size: 64 pages
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
BIOS reported wrong ACPI idfor the processor
ACPI Exception (evxface-0545): AE_NOT_EXIST, Removing notify handler [20060707]
lp: driver loaded but no devices found
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel 865 Chipset.
agpgart: Detected 8060K stolen memory.
agpgart: AGP aperture is 128M @ 0xf0000000
[drm] Initialized drm 1.0.1 20051102
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
parport0: PC-style at 0x378 (0x778) [PCSPP(,...)]
parport0: irq 7 detected
lp0: using parport0 (polling).
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
loop: loaded (max 8 devices)
Intel(R) PRO/1000 Network Driver - version 7.2.9-k4
Copyright (c) 1999-2006 Intel Corporation.
ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 18 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:02:01.0 to 64
e1000: 0000:02:01.0: e1000_probe: (PCI:33MHz:32-bit) 00:30:05:6b:e3:02
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH5: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 16
ICH5: chipset revision 2
ICH5: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x3000-0x3007, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0x3008-0x300f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: WDC WD800LB-07DNA2, ATA DISK drive
hdb: ST38421A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: HL-DT-STDVD-ROM GDR8162B, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 512KiB
hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
 hda: hda1 < hda5 >
hdb: max request size: 128KiB
hdb: 16498944 sectors (8447 MB) w/256KiB Cache, CHS=16368/16/63, UDMA(66)
hdb: cache flushes not supported
 hdb: hdb1 hdb2 < hdb5 >
hdc: ATAPI 24X DVD-ROM drive, 256kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
usbmon: debugfs is not available
ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 17, io mem 0xe0080000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 18, io base 0x00001400
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001800
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 16, io base 0x00001c00
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 18, io base 0x00002000
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usbcore: registered new interface driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
Advanced Linux Sound Architecture Driver Version 1.0.13 (Sun Oct 22 08:56:16 2006 UTC).
ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1f.5 to 64
input: AT Translated Set 2 keyboard as /class/input/input0
intel8x0_measure_ac97_clock: measured 56003 usecs
intel8x0: clocking to 45100
ALSA device list:
  #0: Intel ICH5 with AD1980 at 0xe0080c00, irq 20
ip_conntrack version 2.4 (8124 buckets, 64992 max) - 176 bytes per conntrack
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Starting balanced_irq
Using IPI Shortcut mode
Time: tsc clocksource has been installed.
input: ImExPS/2 Generic Explorer Mouse as /class/input/input1
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 208k freed
Adding 377488k swap on /dev/hdb5.  Priority:-1 extents:1 across:377488k
EXT3 FS on hdb1, internal journal
e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex
(  trace-it-sched-3074 |#0): new 10007840 us user-latency.

^ permalink raw reply	[flat|nested] 4+ messages in thread

end of thread, other threads:[~2006-11-17 19:27 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
     [not found] <20061116110558.GB14245@elte.hu>
     [not found] ` <20061116122820.GA2718@upset.pdb.fsc.net>
     [not found]   ` <20061116123335.GA1392@elte.hu>
     [not found]     ` <20061116124132.GA9048@upset.pdb.fsc.net>
     [not found]       ` <20061116131842.GA12961@elte.hu>
     [not found]         ` <20061116133019.GA14546@upset.pdb.fsc.net>
     [not found]           ` <20061116144356.GA4891@elte.hu>
     [not found]             ` <20061117090356.GA26013@upset.pdb.fsc.net>
     [not found]               ` <20061117112237.GA26270@elte.hu>
     [not found]                 ` <20061117124913.GA24893@upset.pdb.fsc.net>
2006-11-17 13:26                   ` [patch] i386/x86_64: ACPI cpu_idle_wait() fix Ingo Molnar
2006-11-17 13:31                     ` Ingo Molnar
2006-11-17 19:18                       ` Andrew Morton
2006-11-17 19:26                         ` Ingo Molnar

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®