From: "Rafael J. Wysocki" <rjw@sisk.pl>
To: Andrew Morton <akpm@osdl.org>
Cc: Pavel Machek <pavel@ucw.cz>, LKML <linux-kernel@vger.kernel.org>,
Nigel Cunningham <ncunningham@linuxmail.org>
Subject: [PATCH 2/4] swsusp: Untangle freeze_processes
Date: Sat, 18 Nov 2006 23:47:16 +0100 [thread overview]
Message-ID: <200611182347.16692.rjw@sisk.pl> (raw)
In-Reply-To: <200611182335.27453.rjw@sisk.pl>
Move the loop from freeze_processes() to a separate function and call it
independently for user space processes and kernel threads so that the order of
freezing tasks is clearly visible.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
---
kernel/power/process.c | 88 ++++++++++++++++++++++++++++++++-----------------
1 file changed, 58 insertions(+), 30 deletions(-)
Index: linux-2.6.19-rc5-mm2/kernel/power/process.c
===================================================================
--- linux-2.6.19-rc5-mm2.orig/kernel/power/process.c
+++ linux-2.6.19-rc5-mm2/kernel/power/process.c
@@ -86,24 +86,23 @@ static inline int is_user_space(struct t
return p->mm && !(p->flags & PF_BORROWED_MM);
}
-/* 0 = success, else # of processes that we failed to stop */
-int freeze_processes(void)
+static unsigned int try_to_freeze_tasks(int freeze_user_space)
{
- int todo, nr_user, user_frozen;
- unsigned long start_time;
struct task_struct *g, *p;
+ unsigned long end_time;
+ unsigned int todo;
- printk("Stopping tasks... ");
- start_time = jiffies;
- user_frozen = 0;
+ end_time = jiffies + TIMEOUT;
do {
- nr_user = todo = 0;
+ todo = 0;
read_lock(&tasklist_lock);
do_each_thread(g, p) {
if (!freezeable(p))
continue;
+
if (frozen(p))
continue;
+
if (p->state == TASK_TRACED &&
(frozen(p->parent) ||
p->parent->state == TASK_STOPPED)) {
@@ -111,51 +110,80 @@ int freeze_processes(void)
continue;
}
if (is_user_space(p)) {
+ if (!freeze_user_space)
+ continue;
+
/* Freeze the task unless there is a vfork
* completion pending
*/
if (!p->vfork_done)
freeze_process(p);
- nr_user++;
} else {
- /* Freeze only if the user space is frozen */
- if (user_frozen)
- freeze_process(p);
- todo++;
+ if (freeze_user_space)
+ continue;
+
+ freeze_process(p);
}
+ todo++;
} while_each_thread(g, p);
read_unlock(&tasklist_lock);
- todo += nr_user;
- if (!user_frozen && !nr_user) {
- sys_sync();
- start_time = jiffies;
- }
- user_frozen = !nr_user;
yield(); /* Yield is okay here */
- if (todo && time_after(jiffies, start_time + TIMEOUT))
+ if (todo && time_after(jiffies, end_time))
break;
- } while(todo);
+ } while (todo);
- /* This does not unfreeze processes that are already frozen
- * (we have slightly ugly calling convention in that respect,
- * and caller must call thaw_processes() if something fails),
- * but it cleans up leftover PF_FREEZE requests.
- */
if (todo) {
+ /* This does not unfreeze processes that are already frozen
+ * (we have slightly ugly calling convention in that respect,
+ * and caller must call thaw_processes() if something fails),
+ * but it cleans up leftover PF_FREEZE requests.
+ */
printk("\n");
- printk(KERN_ERR "Stopping tasks timed out "
- "after %d seconds (%d tasks remaining):\n",
- TIMEOUT / HZ, todo);
+ printk(KERN_ERR "Stopping %s timed out after %d seconds "
+ "(%d tasks refusing to freeze):\n",
+ freeze_user_space ? "user space processes" :
+ "kernel threads",
+ TIMEOUT / HZ, todo);
read_lock(&tasklist_lock);
do_each_thread(g, p) {
+ if (is_user_space(p)) {
+ if(!freeze_user_space)
+ continue;
+ } else {
+ if(freeze_user_space)
+ continue;
+ }
if (freezeable(p) && !frozen(p))
printk(KERN_ERR " %s\n", p->comm);
+
cancel_freezing(p);
} while_each_thread(g, p);
read_unlock(&tasklist_lock);
- return todo;
}
+ return todo;
+}
+
+/**
+ * freeze_processes - tell processes to enter the refrigerator
+ *
+ * Returns 0 on success, or the number of processes that didn't freeze,
+ * although they were told to.
+ */
+int freeze_processes(void)
+{
+ unsigned int nr_unfrozen;
+
+ printk("Stopping tasks ... ");
+ nr_unfrozen = try_to_freeze_tasks(FREEZER_USER_SPACE);
+ if (nr_unfrozen)
+ return nr_unfrozen;
+
+ sys_sync();
+ nr_unfrozen = try_to_freeze_tasks(FREEZER_KERNEL_THREADS);
+ if (nr_unfrozen)
+ return nr_unfrozen;
+
printk("done.\n");
BUG_ON(in_atomic());
return 0;
next prev parent reply other threads:[~2006-11-18 22:55 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-11-18 22:35 [PATCH 0/4] swsusp cleanups Rafael J. Wysocki
2006-11-18 22:47 ` [PATCH 1/4] swsusp: Untangle thaw_processes Rafael J. Wysocki
2006-11-18 23:03 ` Nigel Cunningham
2006-11-19 2:04 ` Pavel Machek
2006-11-19 12:01 ` Rafael J. Wysocki
2006-11-19 21:16 ` Pavel Machek
2006-11-18 22:47 ` Rafael J. Wysocki [this message]
2006-11-19 2:09 ` [PATCH 2/4] swsusp: Untangle freeze_processes Pavel Machek
2006-11-19 12:05 ` Rafael J. Wysocki
2006-11-19 21:17 ` Pavel Machek
2006-11-18 22:48 ` [PATCH 3/4] swsusp: Fix coding style in suspend.c Rafael J. Wysocki
2006-11-19 2:05 ` Pavel Machek
2006-11-18 22:51 ` [PATCH 4/4] swsusp: Fix labels Rafael J. Wysocki
2006-11-18 23:06 ` Nigel Cunningham
2006-11-18 23:25 ` Rafael J. Wysocki
2006-11-22 22:32 ` Randy Dunlap
2006-11-22 22:50 ` Rafael J. Wysocki
2006-11-19 1:46 ` Pavel Machek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200611182347.16692.rjw@sisk.pl \
--to=rjw@sisk.pl \
--cc=akpm@osdl.org \
--cc=linux-kernel@vger.kernel.org \
--cc=ncunningham@linuxmail.org \
--cc=pavel@ucw.cz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome