From: Erik Mouw <erik@harddisk-recovery.com>
To: "Kristian Høgsberg" <krh@redhat.com>
Cc: Marcel Holtmann <marcel@holtmann.org>,
linux-kernel@vger.kernel.org,
Stefan Richter <stefanr@s5r6.in-berlin.de>
Subject: Re: [PATCH 0/3] New firewire stack
Date: Tue, 5 Dec 2006 17:05:30 +0100 [thread overview]
Message-ID: <20061205160530.GB6043@harddisk-recovery.com> (raw)
In-Reply-To: <45758CB3.80701@redhat.com>
On Tue, Dec 05, 2006 at 10:13:55AM -0500, Kristian Høgsberg wrote:
> Marcel Holtmann wrote:
> >can you please use drivers/firewire/ if you want to start clean or
> >aiming at replacing drivers/ieee1394/. Using "fw" as an abbreviation in
> >the directory path is not really helpful.
>
> Yes, that's probably a better idea. Do you see a problem with using fw_*
> as a prefix in the code though? I don't see anybody using that prefix, but
> Stefan pointed out to me that it's often used to abbreviate firmware too.
So what about fiwi_*? If that's too close to wifi_*, try frwr_.
Erik
--
+-- Erik Mouw -- www.harddisk-recovery.com -- +31 70 370 12 90 --
| Lab address: Delftechpark 26, 2628 XH, Delft, The Netherlands
next prev parent reply other threads:[~2006-12-05 16:05 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-12-05 5:22 Kristian Høgsberg
2006-12-05 5:22 ` [PATCH 2/3] Import fw-ohci driver Kristian Høgsberg
2006-12-05 5:54 ` Pete Zaitcev
2006-12-05 5:58 ` Jeff Garzik
2006-12-05 6:09 ` Benjamin Herrenschmidt
2006-12-09 2:08 ` Kristian Høgsberg
2006-12-09 7:31 ` Stefan Richter
2006-12-10 21:47 ` Kristian Høgsberg
2006-12-10 22:59 ` Stefan Richter
2006-12-10 23:00 ` alignment and packing of struct types (was Re: [PATCH 2/3] Import fw-ohci driver.) Stefan Richter
2006-12-05 5:22 ` [PATCH 3/3] Import fw-sbp2 driver Kristian Høgsberg
2006-12-05 6:07 ` Jeff Garzik
2006-12-05 18:18 ` Stefan Richter
2006-12-14 20:48 ` Kristian Høgsberg
2006-12-14 21:40 ` Stefan Richter
2006-12-15 15:08 ` Kristian Høgsberg
2006-12-15 18:27 ` Stefan Richter
2006-12-05 5:42 ` [PATCH 0/3] New firewire stack Benjamin Herrenschmidt
2006-12-05 6:20 ` Kristian Høgsberg
2006-12-05 16:28 ` Ray Lee
2006-12-05 23:24 ` Kristian Høgsberg
2006-12-05 7:05 ` David Miller
2006-12-05 16:42 ` Kristian Høgsberg
2006-12-05 18:49 ` Stefan Richter
2006-12-05 21:41 ` Benjamin Herrenschmidt
2006-12-05 23:15 ` Stefan Richter
2006-12-05 8:46 ` Marcel Holtmann
2006-12-05 15:13 ` Kristian Høgsberg
2006-12-05 15:30 ` Marcel Holtmann
2006-12-06 16:21 ` Geert Uytterhoeven
2006-12-06 16:32 ` Stefan Richter
2006-12-05 16:05 ` Erik Mouw [this message]
2006-07-12 14:56 ` Pavel Machek
2006-12-08 15:09 ` Stefan Richter
2006-12-09 19:44 ` Kristian Høgsberg
2006-12-10 12:57 ` Stefan Richter
2006-12-10 22:17 ` Kristian Høgsberg
2006-12-10 23:21 ` Stefan Richter
2006-12-09 21:51 ` Benjamin Herrenschmidt
2006-12-09 22:51 ` Stefan Richter
2006-12-05 16:53 ` Marcel Holtmann
2006-12-05 23:27 ` Kristian Høgsberg
2006-12-05 18:49 ` Alexey Dobriyan
2006-12-05 19:53 ` Stefan Richter
2006-12-05 23:21 ` Kristian Høgsberg
2006-12-06 5:35 ` Ben Collins
2006-12-06 8:56 ` Stefan Richter
2006-12-06 11:40 ` Alexander Neundorf
2006-12-06 12:38 ` Stefan Richter
2006-12-06 21:21 ` Kristian Høgsberg
2006-12-06 14:49 ` Ben Collins
2006-12-07 0:31 ` Kristian Høgsberg
2006-12-06 8:36 ` Stefan Richter
2006-12-06 22:27 ` Kristian Høgsberg
2006-12-06 23:55 ` Stefan Richter
2006-12-05 23:23 ` Olaf Hering
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20061205160530.GB6043@harddisk-recovery.com \
--to=erik@harddisk-recovery.com \
--cc=krh@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=marcel@holtmann.org \
--cc=stefanr@s5r6.in-berlin.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®