From: lsorense@csclub.uwaterloo.ca (Lennart Sorensen)
To: Krzysztof Halasa <khc@pm.waw.pl>
Cc: Udo van den Heuvel <udovdh@xs4all.nl>, linux-kernel@vger.kernel.org
Subject: Re: PCI riser cards and PCI irq routing, etc
Date: Wed, 21 Feb 2007 08:46:56 -0500 [thread overview]
Message-ID: <20070221134656.GD22464@csclub.uwaterloo.ca> (raw)
In-Reply-To: <m3ps844bfj.fsf@maximus.localdomain>
On Wed, Feb 21, 2007 at 01:11:12AM +0100, Krzysztof Halasa wrote:
> lsorense@csclub.uwaterloo.ca (Lennart Sorensen) writes:
>
> > Via has a dual pci-ext card. See EXT-PCI at
> > http://www.via.com.tw/en/products/mainboards/accessories.jsp
>
> Right, and they say it's compatible with "EPIA mini-ITX family".
> That means the mappings I just outlined should apply to all of them.
>
> BTW: any "universal" dual+ PCI riser card have to use a PCI bridge
> chip, and a bridge isn't a small 20 pin IC (I'd expect 144 pins or
> so). "Active" or "passive" - doesn't matter.
> --
Certainly. The system I work with (which is not via based) has a PCI to
PCI bridge, which is 208pins (it supports 10 bus master loads behind it).
A cheap riser card that just does device number tricks will only work
on boards designed to use a riser card done that particular way.
--
Len Sorensen
next prev parent reply other threads:[~2007-02-21 19:56 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-02-18 14:07 Udo van den Heuvel
2007-02-18 15:54 ` Lennart Sorensen
2007-02-18 16:15 ` Udo van den Heuvel
2007-02-18 19:39 ` Lennart Sorensen
2007-02-19 1:50 ` Alistair John Strachan
2007-02-19 4:04 ` Udo van den Heuvel
2007-02-19 15:17 ` Lennart Sorensen
2007-02-19 15:43 ` Udo van den Heuvel
2007-02-19 17:13 ` Lennart Sorensen
2007-02-19 15:09 ` Udo van den Heuvel
2007-02-19 20:37 ` Krzysztof Halasa
2007-02-20 4:17 ` Udo van den Heuvel
2007-02-20 14:56 ` Alistair John Strachan
2007-02-20 15:44 ` Udo van den Heuvel
2007-02-20 19:51 ` Alistair John Strachan
2007-02-21 9:24 ` Udo van den Heuvel
2007-02-21 12:24 ` Krzysztof Halasa
2007-02-21 14:59 ` Udo van den Heuvel
2007-02-21 15:12 ` Lennart Sorensen
[not found] ` <m3hctfqjna.fsf@maximus.localdomain>
2007-02-21 22:40 ` Lennart Sorensen
2007-02-21 23:55 ` Alistair John Strachan
2007-02-22 1:19 ` Krzysztof Halasa
2007-02-23 15:45 ` Udo van den Heuvel
2007-02-23 15:54 ` Lennart Sorensen
2007-02-23 17:55 ` Krzysztof Halasa
2007-02-23 18:17 ` Udo van den Heuvel
2007-02-23 19:42 ` Krzysztof Halasa
2007-03-03 14:35 ` Udo van den Heuvel
2007-02-23 18:12 ` Krzysztof Halasa
2007-02-23 18:44 ` Udo van den Heuvel
2007-02-23 20:00 ` Krzysztof Halasa
2007-02-25 15:59 ` Udo van den Heuvel
2007-02-22 1:16 ` Krzysztof Halasa
2007-02-21 18:11 ` Udo van den Heuvel
2007-02-21 19:54 ` Krzysztof Halasa
2007-02-21 20:13 ` Lennart Sorensen
2007-02-21 19:36 ` Krzysztof Halasa
2007-02-21 13:44 ` Lennart Sorensen
2007-02-21 18:55 ` Udo van den Heuvel
2007-02-20 20:47 ` Krzysztof Halasa
2007-02-20 21:51 ` Lennart Sorensen
2007-02-21 0:11 ` Krzysztof Halasa
2007-02-21 13:46 ` Lennart Sorensen [this message]
2007-02-20 4:35 ` Udo van den Heuvel
2007-02-21 0:03 ` Krzysztof Halasa
2007-02-18 20:50 ` Krzysztof Halasa
2007-02-18 20:42 ` Krzysztof Halasa
2007-02-19 15:03 ` Lennart Sorensen
2007-02-19 18:23 ` Krzysztof Halasa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070221134656.GD22464@csclub.uwaterloo.ca \
--to=lsorense@csclub.uwaterloo.ca \
--cc=khc@pm.waw.pl \
--cc=linux-kernel@vger.kernel.org \
--cc=udovdh@xs4all.nl \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®