From: Krzysztof Halasa <khc@pm.waw.pl>
To: Udo van den Heuvel <udovdh@xs4all.nl>
Cc: linux-kernel@vger.kernel.org
Subject: Re: PCI riser cards and PCI irq routing, etc
Date: Fri, 23 Feb 2007 20:42:43 +0100 [thread overview]
Message-ID: <m3mz3464p8.fsf@maximus.localdomain> (raw)
In-Reply-To: <45DF2F9E.20905@xs4all.nl> (Udo van den Heuvel's message of "Fri, 23 Feb 2007 19:17:02 +0100")
Udo van den Heuvel <udovdh@xs4all.nl> writes:
> I have DN19 and DN20 now and it doesn't work.
> Only because the INT mapping on the riser is not right?
Yes. I assume DN20 works, only DN19 has problems.
> http://www.morex.com.tw/drawing/MAR122-J%20Drawing.pdf shows some IDSEL
> jumper with ADxx numbers. What could these be?
> Photo at http://www.morex.com.tw/products/imgproduct/100-1.jpg.
>
> Still DN's?
The second file shows some 28-pin IC but it's not a PCI-PCI bridge.
Jumpers marked AD20-31 are for selecting IDSEL - AD20 = DN9, AD31 is DN20
(DNx = ADx - 11).
Perhaps they could say how the INTs are wired. It's possible the IC
plays some role there. If the riser card is for specific motherboard(s)
only (and it must be) then they can read the IDSEL jumper position
with this IC and rotate INTs appropriately (thus it could work, with that
particular motherboard(s), in any IDSEL jumper position).
--
Krzysztof Halasa
next prev parent reply other threads:[~2007-02-23 19:42 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-02-18 14:07 Udo van den Heuvel
2007-02-18 15:54 ` Lennart Sorensen
2007-02-18 16:15 ` Udo van den Heuvel
2007-02-18 19:39 ` Lennart Sorensen
2007-02-19 1:50 ` Alistair John Strachan
2007-02-19 4:04 ` Udo van den Heuvel
2007-02-19 15:17 ` Lennart Sorensen
2007-02-19 15:43 ` Udo van den Heuvel
2007-02-19 17:13 ` Lennart Sorensen
2007-02-19 15:09 ` Udo van den Heuvel
2007-02-19 20:37 ` Krzysztof Halasa
2007-02-20 4:17 ` Udo van den Heuvel
2007-02-20 14:56 ` Alistair John Strachan
2007-02-20 15:44 ` Udo van den Heuvel
2007-02-20 19:51 ` Alistair John Strachan
2007-02-21 9:24 ` Udo van den Heuvel
2007-02-21 12:24 ` Krzysztof Halasa
2007-02-21 14:59 ` Udo van den Heuvel
2007-02-21 15:12 ` Lennart Sorensen
[not found] ` <m3hctfqjna.fsf@maximus.localdomain>
2007-02-21 22:40 ` Lennart Sorensen
2007-02-21 23:55 ` Alistair John Strachan
2007-02-22 1:19 ` Krzysztof Halasa
2007-02-23 15:45 ` Udo van den Heuvel
2007-02-23 15:54 ` Lennart Sorensen
2007-02-23 17:55 ` Krzysztof Halasa
2007-02-23 18:17 ` Udo van den Heuvel
2007-02-23 19:42 ` Krzysztof Halasa [this message]
2007-03-03 14:35 ` Udo van den Heuvel
2007-02-23 18:12 ` Krzysztof Halasa
2007-02-23 18:44 ` Udo van den Heuvel
2007-02-23 20:00 ` Krzysztof Halasa
2007-02-25 15:59 ` Udo van den Heuvel
2007-02-22 1:16 ` Krzysztof Halasa
2007-02-21 18:11 ` Udo van den Heuvel
2007-02-21 19:54 ` Krzysztof Halasa
2007-02-21 20:13 ` Lennart Sorensen
2007-02-21 19:36 ` Krzysztof Halasa
2007-02-21 13:44 ` Lennart Sorensen
2007-02-21 18:55 ` Udo van den Heuvel
2007-02-20 20:47 ` Krzysztof Halasa
2007-02-20 21:51 ` Lennart Sorensen
2007-02-21 0:11 ` Krzysztof Halasa
2007-02-21 13:46 ` Lennart Sorensen
2007-02-20 4:35 ` Udo van den Heuvel
2007-02-21 0:03 ` Krzysztof Halasa
2007-02-18 20:50 ` Krzysztof Halasa
2007-02-18 20:42 ` Krzysztof Halasa
2007-02-19 15:03 ` Lennart Sorensen
2007-02-19 18:23 ` Krzysztof Halasa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=m3mz3464p8.fsf@maximus.localdomain \
--to=khc@pm.waw.pl \
--cc=linux-kernel@vger.kernel.org \
--cc=udovdh@xs4all.nl \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®