mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Andi Kleen <ak@suse.de>
To: patches@x86-64.org, linux-kernel@vger.kernel.org
Subject: [PATCH] [1/34] x86_64: Move mtrr prototypes from proto.h to mtrr.h
Date: Mon, 30 Apr 2007 17:49:32 +0200 (CEST)	[thread overview]
Message-ID: <20070430154932.B6F01151D3@wotan.suse.de> (raw)
In-Reply-To: <20070430549.617098000@suse.de>



Signed-off-by: Andi Kleen <ak@suse.de>

---
 include/asm-x86_64/mtrr.h  |    8 ++++++++
 include/asm-x86_64/proto.h |    7 -------
 2 files changed, 8 insertions(+), 7 deletions(-)

Index: linux/include/asm-x86_64/mtrr.h
===================================================================
--- linux.orig/include/asm-x86_64/mtrr.h
+++ linux/include/asm-x86_64/mtrr.h
@@ -135,6 +135,14 @@ struct mtrr_gentry32
 
 #endif /* CONFIG_COMPAT */
 
+#ifdef CONFIG_MTRR
+extern void mtrr_ap_init(void);
+extern void mtrr_bp_init(void);
+#else
+#define mtrr_ap_init() do {} while (0)
+#define mtrr_bp_init() do {} while (0)
+#endif
+
 #endif /* __KERNEL__ */
 
 #endif  /*  _LINUX_MTRR_H  */
Index: linux/include/asm-x86_64/proto.h
===================================================================
--- linux.orig/include/asm-x86_64/proto.h
+++ linux/include/asm-x86_64/proto.h
@@ -14,13 +14,6 @@ extern void pda_init(int); 
 extern void early_idt_handler(void);
 
 extern void mcheck_init(struct cpuinfo_x86 *c);
-#ifdef CONFIG_MTRR
-extern void mtrr_ap_init(void);
-extern void mtrr_bp_init(void);
-#else
-#define mtrr_ap_init() do {} while (0)
-#define mtrr_bp_init() do {} while (0)
-#endif
 extern void init_memory_mapping(unsigned long start, unsigned long end);
 
 extern void system_call(void); 

  reply	other threads:[~2007-04-30 15:56 UTC|newest]

Thread overview: 43+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-04-30 15:49 [PATCH] [0/34] x86 candidate patches for review VI: MTRR, APIC, more paravirt, misc Andi Kleen
2007-04-30 15:49 ` Andi Kleen [this message]
2007-04-30 15:49 ` [PATCH] [2/34] x86: Adds mtrr_save_fixed_ranges() for use in two later patches Andi Kleen
2007-04-30 15:49 ` [PATCH] [3/34] x86: Save the MTRRs of the BSP before booting an AP Andi Kleen
2007-04-30 15:49 ` [PATCH] [4/34] x86: Save and restore the fixed-range MTRRs of the BSP when suspending Andi Kleen
2007-04-30 15:49 ` [PATCH] [5/34] i386: Enable support for fixed-range IORRs to keep RdMem & WrMem in sync Andi Kleen
2007-04-30 15:49 ` [PATCH] [6/34] i386: safe_apic_wait_icr_idle - i386 Andi Kleen
2007-04-30 15:49 ` [PATCH] [7/34] x86_64: safe_apic_wait_icr_idle - x86_64 Andi Kleen
2007-04-30 15:49 ` [PATCH] [8/34] i386: use safe_apic_wait_icr_idle - i386 Andi Kleen
2007-04-30 15:49 ` [PATCH] [9/34] x86_64: use safe_apic_wait_icr_idle in smpboot.c - x86_64 Andi Kleen
2007-04-30 15:49 ` [PATCH] [10/34] i386: use safe_apic_wait_icr_idle in smpboot.c Andi Kleen
2007-04-30 15:49 ` [PATCH] [11/34] x86_64: use safe_apic_wait_icr_idle in smpboot.c - x86_64 Andi Kleen
2007-04-30 15:49 ` [PATCH] [12/34] i386: __send_IPI_dest_field - i386 Andi Kleen
2007-04-30 15:49 ` [PATCH] [13/34] x86_64: __send_IPI_dest_field - x86_64 Andi Kleen
2007-04-30 15:49 ` [PATCH] [14/34] i386: Use safe_apic_wait_icr_idle in safe_apic_wait_icr_idle - i386 Andi Kleen
2007-04-30 15:49 ` [PATCH] [15/34] x86_64: Use safe_apic_wait_icr_idle in __send_IPI_dest_field - x86_64 Andi Kleen
2007-04-30 15:49 ` [PATCH] [16/34] i386: fix mtrr sections Andi Kleen
2007-05-02 17:08   ` Bernhard Kaindl
2007-05-03 11:16     ` Bernhard Kaindl
2007-05-03 11:19       ` Andi Kleen
2007-05-03 15:12         ` Randy Dunlap
2007-04-30 15:49 ` [PATCH] [17/34] x86: PARAVIRT: Add a sched_clock paravirt_op Andi Kleen
2007-04-30 15:49 ` [PATCH] [18/34] i386: PARAVIRT: fix startup_ipi_hook config dependency Andi Kleen
2007-04-30 15:49 ` [PATCH] [19/34] x86_64: move __vgetcpu_mode & __jiffies to the vsyscall_2 zone Andi Kleen
2007-04-30 15:49 ` [PATCH] [20/34] i386: avoid checking for cpu gone when CONFIG_HOTPLUG_CPU not defined Andi Kleen
2007-04-30 15:49 ` [PATCH] [21/34] i386: replace spin_lock_irqsave with spin_lock Andi Kleen
2007-04-30 15:49 ` [PATCH] [22/34] i386: clean up flush_tlb_others fn Andi Kleen
2007-04-30 15:49 ` [PATCH] [23/34] i386: check capability Andi Kleen
2007-04-30 15:49 ` [PATCH] [24/34] x86_64: Auto compute __NR_syscall_max at compile time Andi Kleen
2007-04-30 15:49 ` [PATCH] [25/34] x86_64: skip cache_free_alien() on non NUMA Andi Kleen
2007-04-30 15:49 ` [PATCH] [26/34] i386: remove xtime_lock'ing around cpufreq notifier Andi Kleen
2007-04-30 15:50 ` [PATCH] [27/34] i386: pte clear optimization Andi Kleen
2007-04-30 15:50 ` [PATCH] [28/34] i386: pte xchg optimization Andi Kleen
2007-05-02 10:52   ` [patches] " Jan Beulich
2007-05-02 11:05     ` Andi Kleen
2007-05-02 19:19       ` Zachary Amsden
2007-04-30 15:50 ` [PATCH] [29/34] i386: pte simplify ops Andi Kleen
2007-04-30 15:50 ` [PATCH] [30/34] i386: convert the monitor thread to use the kthread API Andi Kleen
2007-04-30 16:55   ` James Bottomley
2007-04-30 17:56     ` Andi Kleen
2007-04-30 15:50 ` [PATCH] [31/34] i386: convert to " Andi Kleen
2007-04-30 15:50 ` [PATCH] [32/34] x86_64: unexport cpu_llc_id Andi Kleen
2007-04-30 15:50 ` [PATCH] [34/34] x86_64: ignore vgacon if hardware not present Andi Kleen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20070430154932.B6F01151D3@wotan.suse.de \
    --to=ak@suse.de \
    --cc=linux-kernel@vger.kernel.org \
    --cc=patches@x86-64.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®