mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Andi Kleen <ak@suse.de>
To: bk@suse.de, akpm@linux-foundation.org, ak@suse.de,
	davej@codemonkey.org.uk, patches@x86-64.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH] [5/34] i386: Enable support for fixed-range IORRs to keep RdMem &  WrMem in sync
Date: Mon, 30 Apr 2007 17:49:36 +0200 (CEST)	[thread overview]
Message-ID: <20070430154937.09820151CA@wotan.suse.de> (raw)
In-Reply-To: <20070430549.617098000@suse.de>


From: Bernhard Kaindl <bk@suse.de>

If our copy of the MTRRs of the BSP has RdMem or WrMem set, and
we are running on an AMD64/K8 system, the boot CPU must have had
MtrrFixDramEn and MtrrFixDramModEn set (otherwise our RDMSR would
have copied these bits cleared), so we set them on this CPU as well.

This allows us to keep the AMD64/K8 RdMem and WrMem bits in sync
across the CPUs of SMP systems in order to fullfill the duty of
system software to "initialize and maintain MTRR consistency
across all processors." as written in the AMD and Intel manuals.

If an WRMSR instruction fails because MtrrFixDramModEn is not
set, I expect that also the Intel-style MTRR bits are not updated.

AK: minor cleanup, moved MSR defines around

Signed-off-by: Bernhard Kaindl <bk@suse.de>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andi Kleen <ak@suse.de>
Cc: Dave Jones <davej@codemonkey.org.uk>

---
 arch/i386/kernel/cpu/mtrr/generic.c |   85 +++++++++++++++++++++++++-----------
 include/asm-i386/msr-index.h        |    5 ++
 2 files changed, 65 insertions(+), 25 deletions(-)

Index: linux/arch/i386/kernel/cpu/mtrr/generic.c
===================================================================
--- linux.orig/arch/i386/kernel/cpu/mtrr/generic.c
+++ linux/arch/i386/kernel/cpu/mtrr/generic.c
@@ -20,6 +20,18 @@ struct mtrr_state {
 	mtrr_type def_type;
 };
 
+struct fixed_range_block {
+	int base_msr; /* start address of an MTRR block */
+	int ranges;   /* number of MTRRs in this block  */
+};
+
+static struct fixed_range_block fixed_range_blocks[] = {
+	{ MTRRfix64K_00000_MSR, 1 }, /* one  64k MTRR  */
+	{ MTRRfix16K_80000_MSR, 2 }, /* two  16k MTRRs */
+	{ MTRRfix4K_C0000_MSR,  8 }, /* eight 4k MTRRs */
+	{}
+};
+
 static unsigned long smp_changes_mask;
 static struct mtrr_state mtrr_state = {};
 
@@ -152,6 +164,44 @@ void mtrr_wrmsr(unsigned msr, unsigned a
 			smp_processor_id(), msr, a, b);
 }
 
+/**
+ * Enable and allow read/write of extended fixed-range MTRR bits on K8 CPUs
+ * see AMD publication no. 24593, chapter 3.2.1 for more information
+ */
+static inline void k8_enable_fixed_iorrs(void)
+{
+	unsigned lo, hi;
+
+	rdmsr(MSR_K8_SYSCFG, lo, hi);
+	mtrr_wrmsr(MSR_K8_SYSCFG, lo
+				| K8_MTRRFIXRANGE_DRAM_ENABLE
+				| K8_MTRRFIXRANGE_DRAM_MODIFY, hi);
+}
+
+/**
+ * Checks and updates an fixed-range MTRR if it differs from the value it
+ * should have. If K8 extenstions are wanted, update the K8 SYSCFG MSR also.
+ * see AMD publication no. 24593, chapter 7.8.1, page 233 for more information
+ * \param msr MSR address of the MTTR which should be checked and updated
+ * \param changed pointer which indicates whether the MTRR needed to be changed
+ * \param msrwords pointer to the MSR values which the MSR should have
+ */
+static void set_fixed_range(int msr, int * changed, unsigned int * msrwords)
+{
+	unsigned lo, hi;
+
+	rdmsr(msr, lo, hi);
+
+	if (lo != msrwords[0] || hi != msrwords[1]) {
+		if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD &&
+		    boot_cpu_data.x86 == 15 &&
+		    ((msrwords[0] | msrwords[1]) & K8_MTRR_RDMEM_WRMEM_MASK))
+			k8_enable_fixed_iorrs();
+		mtrr_wrmsr(msr, msrwords[0], msrwords[1]);
+		*changed = TRUE;
+	}
+}
+
 int generic_get_free_region(unsigned long base, unsigned long size, int replace_reg)
 /*  [SUMMARY] Get a free MTRR.
     <base> The starting (base) address of the region.
@@ -201,36 +251,21 @@ static void generic_get_mtrr(unsigned in
 	*type = base_lo & 0xff;
 }
 
+/**
+ * Checks and updates the fixed-range MTRRs if they differ from the saved set
+ * \param frs pointer to fixed-range MTRR values, saved by get_fixed_ranges()
+ */
 static int set_fixed_ranges(mtrr_type * frs)
 {
-	unsigned int *p = (unsigned int *) frs;
+	unsigned long long *saved = (unsigned long long *) frs;
 	int changed = FALSE;
-	int i;
-	unsigned int lo, hi;
-
-	rdmsr(MTRRfix64K_00000_MSR, lo, hi);
-	if (p[0] != lo || p[1] != hi) {
-		mtrr_wrmsr(MTRRfix64K_00000_MSR, p[0], p[1]);
-		changed = TRUE;
-	}
+	int block=-1, range;
 
-	for (i = 0; i < 2; i++) {
-		rdmsr(MTRRfix16K_80000_MSR + i, lo, hi);
-		if (p[2 + i * 2] != lo || p[3 + i * 2] != hi) {
-			mtrr_wrmsr(MTRRfix16K_80000_MSR + i, p[2 + i * 2],
-			      p[3 + i * 2]);
-			changed = TRUE;
-		}
-	}
+	while (fixed_range_blocks[++block].ranges)
+	    for (range=0; range < fixed_range_blocks[block].ranges; range++)
+		set_fixed_range(fixed_range_blocks[block].base_msr + range,
+		    &changed, (unsigned int *) saved++);
 
-	for (i = 0; i < 8; i++) {
-		rdmsr(MTRRfix4K_C0000_MSR + i, lo, hi);
-		if (p[6 + i * 2] != lo || p[7 + i * 2] != hi) {
-			mtrr_wrmsr(MTRRfix4K_C0000_MSR + i, p[6 + i * 2],
-			      p[7 + i * 2]);
-			changed = TRUE;
-		}
-	}
 	return changed;
 }
 
Index: linux/include/asm-i386/msr-index.h
===================================================================
--- linux.orig/include/asm-i386/msr-index.h
+++ linux/include/asm-i386/msr-index.h
@@ -87,6 +87,11 @@
 #define MSR_K7_CLK_CTL			0xc001001b
 #define MSR_K8_TOP_MEM2			0xc001001d
 #define MSR_K8_SYSCFG			0xc0010010
+
+#define K8_MTRRFIXRANGE_DRAM_ENABLE	0x00040000 /* MtrrFixDramEn bit    */
+#define K8_MTRRFIXRANGE_DRAM_MODIFY	0x00080000 /* MtrrFixDramModEn bit */
+#define K8_MTRR_RDMEM_WRMEM_MASK	0x18181818 /* Mask: RdMem|WrMem    */
+
 #define MSR_K7_HWCR			0xc0010015
 #define MSR_K8_HWCR			0xc0010015
 #define MSR_K7_FID_VID_CTL		0xc0010041

  parent reply	other threads:[~2007-04-30 15:55 UTC|newest]

Thread overview: 43+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-04-30 15:49 [PATCH] [0/34] x86 candidate patches for review VI: MTRR, APIC, more paravirt, misc Andi Kleen
2007-04-30 15:49 ` [PATCH] [1/34] x86_64: Move mtrr prototypes from proto.h to mtrr.h Andi Kleen
2007-04-30 15:49 ` [PATCH] [2/34] x86: Adds mtrr_save_fixed_ranges() for use in two later patches Andi Kleen
2007-04-30 15:49 ` [PATCH] [3/34] x86: Save the MTRRs of the BSP before booting an AP Andi Kleen
2007-04-30 15:49 ` [PATCH] [4/34] x86: Save and restore the fixed-range MTRRs of the BSP when suspending Andi Kleen
2007-04-30 15:49 ` Andi Kleen [this message]
2007-04-30 15:49 ` [PATCH] [6/34] i386: safe_apic_wait_icr_idle - i386 Andi Kleen
2007-04-30 15:49 ` [PATCH] [7/34] x86_64: safe_apic_wait_icr_idle - x86_64 Andi Kleen
2007-04-30 15:49 ` [PATCH] [8/34] i386: use safe_apic_wait_icr_idle - i386 Andi Kleen
2007-04-30 15:49 ` [PATCH] [9/34] x86_64: use safe_apic_wait_icr_idle in smpboot.c - x86_64 Andi Kleen
2007-04-30 15:49 ` [PATCH] [10/34] i386: use safe_apic_wait_icr_idle in smpboot.c Andi Kleen
2007-04-30 15:49 ` [PATCH] [11/34] x86_64: use safe_apic_wait_icr_idle in smpboot.c - x86_64 Andi Kleen
2007-04-30 15:49 ` [PATCH] [12/34] i386: __send_IPI_dest_field - i386 Andi Kleen
2007-04-30 15:49 ` [PATCH] [13/34] x86_64: __send_IPI_dest_field - x86_64 Andi Kleen
2007-04-30 15:49 ` [PATCH] [14/34] i386: Use safe_apic_wait_icr_idle in safe_apic_wait_icr_idle - i386 Andi Kleen
2007-04-30 15:49 ` [PATCH] [15/34] x86_64: Use safe_apic_wait_icr_idle in __send_IPI_dest_field - x86_64 Andi Kleen
2007-04-30 15:49 ` [PATCH] [16/34] i386: fix mtrr sections Andi Kleen
2007-05-02 17:08   ` Bernhard Kaindl
2007-05-03 11:16     ` Bernhard Kaindl
2007-05-03 11:19       ` Andi Kleen
2007-05-03 15:12         ` Randy Dunlap
2007-04-30 15:49 ` [PATCH] [17/34] x86: PARAVIRT: Add a sched_clock paravirt_op Andi Kleen
2007-04-30 15:49 ` [PATCH] [18/34] i386: PARAVIRT: fix startup_ipi_hook config dependency Andi Kleen
2007-04-30 15:49 ` [PATCH] [19/34] x86_64: move __vgetcpu_mode & __jiffies to the vsyscall_2 zone Andi Kleen
2007-04-30 15:49 ` [PATCH] [20/34] i386: avoid checking for cpu gone when CONFIG_HOTPLUG_CPU not defined Andi Kleen
2007-04-30 15:49 ` [PATCH] [21/34] i386: replace spin_lock_irqsave with spin_lock Andi Kleen
2007-04-30 15:49 ` [PATCH] [22/34] i386: clean up flush_tlb_others fn Andi Kleen
2007-04-30 15:49 ` [PATCH] [23/34] i386: check capability Andi Kleen
2007-04-30 15:49 ` [PATCH] [24/34] x86_64: Auto compute __NR_syscall_max at compile time Andi Kleen
2007-04-30 15:49 ` [PATCH] [25/34] x86_64: skip cache_free_alien() on non NUMA Andi Kleen
2007-04-30 15:49 ` [PATCH] [26/34] i386: remove xtime_lock'ing around cpufreq notifier Andi Kleen
2007-04-30 15:50 ` [PATCH] [27/34] i386: pte clear optimization Andi Kleen
2007-04-30 15:50 ` [PATCH] [28/34] i386: pte xchg optimization Andi Kleen
2007-05-02 10:52   ` [patches] " Jan Beulich
2007-05-02 11:05     ` Andi Kleen
2007-05-02 19:19       ` Zachary Amsden
2007-04-30 15:50 ` [PATCH] [29/34] i386: pte simplify ops Andi Kleen
2007-04-30 15:50 ` [PATCH] [30/34] i386: convert the monitor thread to use the kthread API Andi Kleen
2007-04-30 16:55   ` James Bottomley
2007-04-30 17:56     ` Andi Kleen
2007-04-30 15:50 ` [PATCH] [31/34] i386: convert to " Andi Kleen
2007-04-30 15:50 ` [PATCH] [32/34] x86_64: unexport cpu_llc_id Andi Kleen
2007-04-30 15:50 ` [PATCH] [34/34] x86_64: ignore vgacon if hardware not present Andi Kleen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20070430154937.09820151CA@wotan.suse.de \
    --to=ak@suse.de \
    --cc=akpm@linux-foundation.org \
    --cc=bk@suse.de \
    --cc=davej@codemonkey.org.uk \
    --cc=linux-kernel@vger.kernel.org \
    --cc=patches@x86-64.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®