* Re: Fwd: Re: Linux 2.6.22-rc1 [not found] <Pine.LNX.4.61.0705131123280.9570@yvahk01.tjqt.qr> @ 2007-05-14 1:55 ` Mattia Dongili 2007-05-14 5:49 ` Jan Engelhardt 0 siblings, 1 reply; 6+ messages in thread From: Mattia Dongili @ 2007-05-14 1:55 UTC (permalink / raw) To: linux-acpi, jengelh, Linux Kernel Mailing List On Sun, May 13, 2007 at 11:27:31AM +0200, Jan Engelhardt wrote: > On May 12 2007 20:20, Linus Torvalds wrote: > > > >Ok, the merge window has closed, and 2.6.22-rc1 is out there. > > I have hit a randconfig compile failure. .config attached. > > LD .tmp_vmlinux1 > drivers/built-in.o: In function `acpi_bus_generate_event': > (.text+0x233f7): undefined reference to `event_is_open' > drivers/built-in.o: In function `acpi_bus_get_power': > (.text+0x236ad): undefined reference to `acpi_power_get_inferred_state' > drivers/built-in.o: In function `acpi_bus_set_power': > (.text+0x237c3): undefined reference to `acpi_power_transition' > drivers/built-in.o: In function `acpi_bus_set_power': > (.text+0x23835): undefined reference to `acpi_power_transition' > drivers/built-in.o: In function `sony_pic_fanspeed_store': > sony-laptop.c:(.text+0x91930): undefined reference to `ec_write' > drivers/built-in.o: In function `sony_pic_fanspeed_show': > sony-laptop.c:(.text+0x9195d): undefined reference to `ec_read' > make: *** [.tmp_vmlinux1] Error 1 I actually can't reproduce it with your .config. >From a clean tree, running make fires up the oldconfig which fixes the many missing/garbled dependencies. In any case SONY_LAPTOP depends on ACPI which always build EC statically if selected. clues? -- mattia :wq! ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Fwd: Re: Linux 2.6.22-rc1 2007-05-14 1:55 ` Fwd: Re: Linux 2.6.22-rc1 Mattia Dongili @ 2007-05-14 5:49 ` Jan Engelhardt 2007-05-14 17:45 ` Randy Dunlap 0 siblings, 1 reply; 6+ messages in thread From: Jan Engelhardt @ 2007-05-14 5:49 UTC (permalink / raw) To: Mattia Dongili; +Cc: linux-acpi, Linux Kernel Mailing List On May 14 2007 10:55, Mattia Dongili wrote: >On Sun, May 13, 2007 at 11:27:31AM +0200, Jan Engelhardt wrote: >> On May 12 2007 20:20, Linus Torvalds wrote: >> > >> >Ok, the merge window has closed, and 2.6.22-rc1 is out there. >> >> I have hit a randconfig compile failure. .config attached. >> >> LD .tmp_vmlinux1 >> drivers/built-in.o: In function `acpi_bus_generate_event': >> (.text+0x233f7): undefined reference to `event_is_open' >> drivers/built-in.o: In function `acpi_bus_get_power': >> (.text+0x236ad): undefined reference to `acpi_power_get_inferred_state' >> drivers/built-in.o: In function `acpi_bus_set_power': >> (.text+0x237c3): undefined reference to `acpi_power_transition' >> drivers/built-in.o: In function `acpi_bus_set_power': >> (.text+0x23835): undefined reference to `acpi_power_transition' >> drivers/built-in.o: In function `sony_pic_fanspeed_store': >> sony-laptop.c:(.text+0x91930): undefined reference to `ec_write' >> drivers/built-in.o: In function `sony_pic_fanspeed_show': >> sony-laptop.c:(.text+0x9195d): undefined reference to `ec_read' >> make: *** [.tmp_vmlinux1] Error 1 > >I actually can't reproduce it with your .config. But I can. Did you try it on x86_64? From 2.6.22-rc1 [ commit 39403865d2e4590802553370a56c9ab93131e4ee in /linux-2.6.git] ? bzip2 -cd randconfig-1.bz2 >.config make -j8 HOSTLD scripts/kconfig/conf scripts/kconfig/conf -s arch/x86_64/Kconfig drivers/macintosh/Kconfig:116:warning: 'select' used by config symbol ' drivers/net/Kconfig:2283:warning: 'select' used by config symbol 'UCC_G drivers/input/keyboard/Kconfig:170:warning: 'select' used by config sym drivers/input/mouse/Kconfig:181:warning: 'select' used by config symbol CHK include/linux/version.h UPD include/linux/version.h CHK include/linux/utsrelease.h UPD include/linux/utsrelease.h SYMLINK include/asm -> include/asm-x86_64 >>From a clean tree, running make fires up the oldconfig which fixes the >many missing/garbled dependencies. In any case SONY_LAPTOP depends on >ACPI which always build EC statically if selected. I really presume it is something on x86_64, because doing gzip -cd /proc/config.gz make on i386 seemed to compile fine - including the sony modules. Jan -- ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Fwd: Re: Linux 2.6.22-rc1 2007-05-14 5:49 ` Jan Engelhardt @ 2007-05-14 17:45 ` Randy Dunlap 2007-05-15 15:42 ` Mattia Dongili 0 siblings, 1 reply; 6+ messages in thread From: Randy Dunlap @ 2007-05-14 17:45 UTC (permalink / raw) To: Jan Engelhardt; +Cc: Mattia Dongili, linux-acpi, Linux Kernel Mailing List On Mon, 14 May 2007 07:49:31 +0200 (MEST) Jan Engelhardt wrote: > > On May 14 2007 10:55, Mattia Dongili wrote: > >On Sun, May 13, 2007 at 11:27:31AM +0200, Jan Engelhardt wrote: > >> On May 12 2007 20:20, Linus Torvalds wrote: > >> > > >> >Ok, the merge window has closed, and 2.6.22-rc1 is out there. > >> > >> I have hit a randconfig compile failure. .config attached. > >> > >> LD .tmp_vmlinux1 > >> drivers/built-in.o: In function `acpi_bus_generate_event': > >> (.text+0x233f7): undefined reference to `event_is_open' > >> drivers/built-in.o: In function `acpi_bus_get_power': > >> (.text+0x236ad): undefined reference to `acpi_power_get_inferred_state' > >> drivers/built-in.o: In function `acpi_bus_set_power': > >> (.text+0x237c3): undefined reference to `acpi_power_transition' > >> drivers/built-in.o: In function `acpi_bus_set_power': > >> (.text+0x23835): undefined reference to `acpi_power_transition' > >> drivers/built-in.o: In function `sony_pic_fanspeed_store': > >> sony-laptop.c:(.text+0x91930): undefined reference to `ec_write' > >> drivers/built-in.o: In function `sony_pic_fanspeed_show': > >> sony-laptop.c:(.text+0x9195d): undefined reference to `ec_read' > >> make: *** [.tmp_vmlinux1] Error 1 > > > >I actually can't reproduce it with your .config. > > But I can. Did you try it on x86_64? From 2.6.22-rc1 [ > commit 39403865d2e4590802553370a56c9ab93131e4ee in /linux-2.6.git] ? > > bzip2 -cd randconfig-1.bz2 >.config > make -j8 Yes, build easily fails for me also. > HOSTLD scripts/kconfig/conf > scripts/kconfig/conf -s arch/x86_64/Kconfig > drivers/macintosh/Kconfig:116:warning: 'select' used by config symbol ' > drivers/net/Kconfig:2283:warning: 'select' used by config symbol 'UCC_G > drivers/input/keyboard/Kconfig:170:warning: 'select' used by config sym > drivers/input/mouse/Kconfig:181:warning: 'select' used by config symbol > CHK include/linux/version.h > UPD include/linux/version.h > CHK include/linux/utsrelease.h > UPD include/linux/utsrelease.h > SYMLINK include/asm -> include/asm-x86_64 > > > >>From a clean tree, running make fires up the oldconfig which fixes the > >many missing/garbled dependencies. In any case SONY_LAPTOP depends on > >ACPI which always build EC statically if selected. > > I really presume it is something on x86_64, because doing > > gzip -cd /proc/config.gz > make > > on i386 seemed to compile fine - including the sony modules. --- ~Randy *** Remember to use Documentation/SubmitChecklist when testing your code *** ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Fwd: Re: Linux 2.6.22-rc1 2007-05-14 17:45 ` Randy Dunlap @ 2007-05-15 15:42 ` Mattia Dongili 2007-05-15 17:46 ` Randy Dunlap 0 siblings, 1 reply; 6+ messages in thread From: Mattia Dongili @ 2007-05-15 15:42 UTC (permalink / raw) To: Randy Dunlap; +Cc: Jan Engelhardt, linux-acpi, Linux Kernel Mailing List, sam On Mon, May 14, 2007 at 10:45:46AM -0700, Randy Dunlap wrote: > On Mon, 14 May 2007 07:49:31 +0200 (MEST) Jan Engelhardt wrote: > > > > > On May 14 2007 10:55, Mattia Dongili wrote: > > >On Sun, May 13, 2007 at 11:27:31AM +0200, Jan Engelhardt wrote: > > >> On May 12 2007 20:20, Linus Torvalds wrote: > > >> > > > >> >Ok, the merge window has closed, and 2.6.22-rc1 is out there. > > >> > > >> I have hit a randconfig compile failure. .config attached. > > >> > > >> LD .tmp_vmlinux1 > > >> drivers/built-in.o: In function `acpi_bus_generate_event': > > >> (.text+0x233f7): undefined reference to `event_is_open' > > >> drivers/built-in.o: In function `acpi_bus_get_power': > > >> (.text+0x236ad): undefined reference to `acpi_power_get_inferred_state' > > >> drivers/built-in.o: In function `acpi_bus_set_power': > > >> (.text+0x237c3): undefined reference to `acpi_power_transition' > > >> drivers/built-in.o: In function `acpi_bus_set_power': > > >> (.text+0x23835): undefined reference to `acpi_power_transition' > > >> drivers/built-in.o: In function `sony_pic_fanspeed_store': > > >> sony-laptop.c:(.text+0x91930): undefined reference to `ec_write' > > >> drivers/built-in.o: In function `sony_pic_fanspeed_show': > > >> sony-laptop.c:(.text+0x9195d): undefined reference to `ec_read' > > >> make: *** [.tmp_vmlinux1] Error 1 > > > > > >I actually can't reproduce it with your .config. > > > > But I can. Did you try it on x86_64? From 2.6.22-rc1 [ > > commit 39403865d2e4590802553370a56c9ab93131e4ee in /linux-2.6.git] ? > > > > bzip2 -cd randconfig-1.bz2 >.config > > make -j8 > > Yes, build easily fails for me also. ok, as far as sony-laptop is concerned a dependency on ACPI_EC suffices to fix the link failure, but I guess that would just hide the real issue. IOW: why does ACPI_EC, ACPI_SYSTEM and ACPI_POWER are not set when the ACPI symbol is? Given the drivers/acpi/Kconfig portion if ACPI ... config ACPI_EC bool default y help ... config ACPI_POWER bool default y config ACPI_SYSTEM bool default y help ... ... endif I'd expect the 3 symbols to be all set when CONFIG_ACPI=y. What am I overseeing? -- mattia :wq! ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Fwd: Re: Linux 2.6.22-rc1 2007-05-15 15:42 ` Mattia Dongili @ 2007-05-15 17:46 ` Randy Dunlap 2007-05-16 2:41 ` Mattia Dongili 0 siblings, 1 reply; 6+ messages in thread From: Randy Dunlap @ 2007-05-15 17:46 UTC (permalink / raw) To: Mattia Dongili; +Cc: Jan Engelhardt, linux-acpi, Linux Kernel Mailing List, sam On Wed, 16 May 2007 00:42:08 +0900 Mattia Dongili wrote: > On Mon, May 14, 2007 at 10:45:46AM -0700, Randy Dunlap wrote: > > On Mon, 14 May 2007 07:49:31 +0200 (MEST) Jan Engelhardt wrote: > > > > > > > > On May 14 2007 10:55, Mattia Dongili wrote: > > > >On Sun, May 13, 2007 at 11:27:31AM +0200, Jan Engelhardt wrote: > > > >> On May 12 2007 20:20, Linus Torvalds wrote: > > > >> > > > > >> >Ok, the merge window has closed, and 2.6.22-rc1 is out there. > > > >> > > > >> I have hit a randconfig compile failure. .config attached. > > > >> > > > >> LD .tmp_vmlinux1 > > > >> drivers/built-in.o: In function `acpi_bus_generate_event': > > > >> (.text+0x233f7): undefined reference to `event_is_open' > > > >> drivers/built-in.o: In function `acpi_bus_get_power': > > > >> (.text+0x236ad): undefined reference to `acpi_power_get_inferred_state' > > > >> drivers/built-in.o: In function `acpi_bus_set_power': > > > >> (.text+0x237c3): undefined reference to `acpi_power_transition' > > > >> drivers/built-in.o: In function `acpi_bus_set_power': > > > >> (.text+0x23835): undefined reference to `acpi_power_transition' > > > >> drivers/built-in.o: In function `sony_pic_fanspeed_store': > > > >> sony-laptop.c:(.text+0x91930): undefined reference to `ec_write' > > > >> drivers/built-in.o: In function `sony_pic_fanspeed_show': > > > >> sony-laptop.c:(.text+0x9195d): undefined reference to `ec_read' > > > >> make: *** [.tmp_vmlinux1] Error 1 > > > > > > > >I actually can't reproduce it with your .config. > > > > > > But I can. Did you try it on x86_64? From 2.6.22-rc1 [ > > > commit 39403865d2e4590802553370a56c9ab93131e4ee in /linux-2.6.git] ? > > > > > > bzip2 -cd randconfig-1.bz2 >.config > > > make -j8 > > > > Yes, build easily fails for me also. > > ok, as far as sony-laptop is concerned a dependency on ACPI_EC suffices > to fix the link failure, but I guess that would just hide the real > issue. > IOW: why does ACPI_EC, ACPI_SYSTEM and ACPI_POWER are not set when the > ACPI symbol is? > > Given the drivers/acpi/Kconfig portion > > if ACPI > ... > config ACPI_EC > bool > default y > help > ... > > config ACPI_POWER > bool > default y > > config ACPI_SYSTEM > bool > default y > help > ... > ... > endif > > I'd expect the 3 symbols to be all set when CONFIG_ACPI=y. > What am I overseeing? I think that this is just 'make randconfig' throwing a curve ball. ACPI depends on PM, but PM=n. In my experience, randconfig is a good tool for testing oddball configs, but the results are not always something that is fixable or needs to be fixed. --- ~Randy *** Remember to use Documentation/SubmitChecklist when testing your code *** ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Fwd: Re: Linux 2.6.22-rc1 2007-05-15 17:46 ` Randy Dunlap @ 2007-05-16 2:41 ` Mattia Dongili 0 siblings, 0 replies; 6+ messages in thread From: Mattia Dongili @ 2007-05-16 2:41 UTC (permalink / raw) To: Randy Dunlap; +Cc: Jan Engelhardt, linux-acpi, Linux Kernel Mailing List, sam On Tue, May 15, 2007 at 10:46:21AM -0700, Randy Dunlap wrote: > On Wed, 16 May 2007 00:42:08 +0900 Mattia Dongili wrote: ... > > Given the drivers/acpi/Kconfig portion > > > > if ACPI > > ... > > config ACPI_EC > > bool > > default y > > help > > ... > > > > config ACPI_POWER > > bool > > default y > > > > config ACPI_SYSTEM > > bool > > default y > > help > > ... > > ... > > endif > > > > I'd expect the 3 symbols to be all set when CONFIG_ACPI=y. > > What am I overseeing? > > I think that this is just 'make randconfig' throwing a curve ball. > ACPI depends on PM, but PM=n. In my experience, randconfig is a > good tool for testing oddball configs, but the results are not > always something that is fixable or needs to be fixed. It looks like Kconfig does the right thing on i386 though. Not the same on x84_64. -- mattia :wq! ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2007-05-16 2:41 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <Pine.LNX.4.61.0705131123280.9570@yvahk01.tjqt.qr>
2007-05-14 1:55 ` Fwd: Re: Linux 2.6.22-rc1 Mattia Dongili
2007-05-14 5:49 ` Jan Engelhardt
2007-05-14 17:45 ` Randy Dunlap
2007-05-15 15:42 ` Mattia Dongili
2007-05-15 17:46 ` Randy Dunlap
2007-05-16 2:41 ` Mattia Dongili
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®